From: Ferruh Yigit <ferruh.yigit@intel.com>
To: Alejandro Lucero <alejandro.lucero@netronome.com>, dev@dpdk.org
Cc: stable@dpdk.org
Subject: Re: [dpdk-stable] [dpdk-dev] [PATCH] nfp: handle packets with length 0 as usual ones
Date: Fri, 18 Aug 2017 16:10:12 +0100 [thread overview]
Message-ID: <51e4be70-4fa4-fbab-6e7a-5f8e9c94ee3c@intel.com> (raw)
In-Reply-To: <1502445950-44582-1-git-send-email-alejandro.lucero@netronome.com>
On 8/11/2017 11:05 AM, Alejandro Lucero wrote:
> A DPDK app could, whatever the reason, send packets with size 0.
> The PMD is not sending those packets, which does make sense,
> but the problem is the mbuf is not released either. That leads
> to mbufs not being available, because the app trusts the
> PMD will do it.
>
> Although this is a problem related to app wrong behaviour, we
> should harden the PMD in this regard. Not sending a packet with
> size 0 could be problematic, needing special handling inside the
> PMD xmit function. It could be a burst of those packets, which can
> be easily handled, but it could also be a single packet in a burst,
> what is harder to handle.
>
> It would be simpler to just send that kind of packets, which will
> likely be dropped by the hw at some point. The main problem is how
> the fw/hw handles the DMA, because a dma read to a hypothetical 0x0
> address could trigger an IOMMU error. It turns out, it is safe to
> send a descriptor with packet size 0 to the hardware: the DMA never
> happens, from the PCIe point of view.
>
> Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
> ---
> drivers/net/nfp/nfp_net.c | 17 ++++++++++++-----
> 1 file changed, 12 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
> index 92b03c4..679a91b 100644
> --- a/drivers/net/nfp/nfp_net.c
> +++ b/drivers/net/nfp/nfp_net.c
> @@ -2094,7 +2094,7 @@ uint32_t nfp_net_txq_full(struct nfp_net_txq *txq)
> */
> pkt_size = pkt->pkt_len;
>
> - while (pkt_size) {
> + while (pkt) {
> /* Copying TSO, VLAN and cksum info */
> *txds = txd;
>
> @@ -2126,17 +2126,24 @@ uint32_t nfp_net_txq_full(struct nfp_net_txq *txq)
> txq->wr_p = 0;
>
> pkt_size -= dma_size;
> - if (!pkt_size) {
> + if (!pkt_size)
> /* End of packet */
> txds->offset_eop |= PCIE_DESC_TX_EOP;
> - } else {
> + else
> txds->offset_eop &= PCIE_DESC_TX_OFFSET_MASK;
> - pkt = pkt->next;
> - }
> +
> + pkt = pkt->next;
> /* Referencing next free TX descriptor */
> txds = &txq->txds[txq->wr_p];
> lmbuf = &txq->txbufs[txq->wr_p].mbuf;
> issued_descs++;
> +
> + /* Double-checking if we have to use chained mbuf.
> + * It seems there are some apps which could wrongly
> + * have zeroed mbufs chained leading to send null
> + * descriptors to the hw. */
> + if (!pkt_size)
> + break;
For the case chained mbufs with all are zero size [1], won't this cause
next mbufs not freed because rte_pktmbuf_free_seg(*lmbuf) used?
[1]
As you mentioned in the commit log, this not correct thing to do, but
since patch is trying to harden PMD for this wrong application behavior..
> }
> i++;
> }
>
next prev parent reply other threads:[~2017-08-18 15:10 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-11 10:05 [dpdk-stable] " Alejandro Lucero
2017-08-18 15:10 ` Ferruh Yigit [this message]
2017-08-18 16:23 ` [dpdk-stable] [dpdk-dev] " Alejandro Lucero
2017-08-21 10:34 ` Ferruh Yigit
2017-08-21 13:08 ` Alejandro Lucero
2017-08-21 13:25 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51e4be70-4fa4-fbab-6e7a-5f8e9c94ee3c@intel.com \
--to=ferruh.yigit@intel.com \
--cc=alejandro.lucero@netronome.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).