patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
To: dev@dpdk.org
Cc: stable@dpdk.org, nirranjan@chelsio.com
Subject: [dpdk-stable] [PATCH 3/5] net/cxgbe: fix double MPS alloc due to flow validate and create
Date: Sat, 13 Jun 2020 03:37:25 +0530	[thread overview]
Message-ID: <98c3a261b8e69bbf58fcc65d7d741be04421615c.1591998771.git.rahul.lakkireddy@chelsio.com> (raw)
In-Reply-To: <cover.1591998771.git.rahul.lakkireddy@chelsio.com>
In-Reply-To: <cover.1591998771.git.rahul.lakkireddy@chelsio.com>

The Multi Port Switch (MPS) entry is allocated twice when both
flow validate and create are invoked, but only freed once during
flow destroy. Avoid double alloc by moving MPS entry allocation
closer to when the filter create request is sent to hardware and
will be ignored for filter validate request.

Fixes: fefee7a619a4 ("net/cxgbe: add flow ops to match based on dest MAC")
Cc: stable@dpdk.org

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
---
 drivers/net/cxgbe/cxgbe_filter.c | 32 ++++++++++++++++++++++++++++++++
 drivers/net/cxgbe/cxgbe_filter.h |  4 +++-
 drivers/net/cxgbe/cxgbe_flow.c   | 28 +++-------------------------
 3 files changed, 38 insertions(+), 26 deletions(-)

diff --git a/drivers/net/cxgbe/cxgbe_filter.c b/drivers/net/cxgbe/cxgbe_filter.c
index 06233e41e..317830f58 100644
--- a/drivers/net/cxgbe/cxgbe_filter.c
+++ b/drivers/net/cxgbe/cxgbe_filter.c
@@ -8,6 +8,7 @@
 #include "base/t4_tcb.h"
 #include "base/t4_regs.h"
 #include "cxgbe_filter.h"
+#include "mps_tcam.h"
 #include "clip_tbl.h"
 #include "l2t.h"
 #include "smt.h"
@@ -290,12 +291,17 @@ int cxgbe_alloc_ftid(struct adapter *adap, u8 nentries)
  */
 static void clear_filter(struct filter_entry *f)
 {
+	struct port_info *pi = ethdev2pinfo(f->dev);
+
 	if (f->clipt)
 		cxgbe_clip_release(f->dev, f->clipt);
 
 	if (f->l2t)
 		cxgbe_l2t_release(f->l2t);
 
+	if (f->fs.mask.macidx)
+		cxgbe_mpstcam_remove(pi, f->fs.val.macidx);
+
 	/* The zeroing of the filter rule below clears the filter valid,
 	 * pending, locked flags etc. so it's all we need for
 	 * this operation.
@@ -609,6 +615,19 @@ static int cxgbe_set_hash_filter(struct rte_eth_dev *dev,
 	f->dev = dev;
 	f->fs.iq = iq;
 
+	/* Allocate MPS TCAM entry to match Destination MAC. */
+	if (f->fs.mask.macidx) {
+		int idx;
+
+		idx = cxgbe_mpstcam_alloc(pi, f->fs.val.dmac, f->fs.mask.dmac);
+		if (idx <= 0) {
+			ret = -ENOMEM;
+			goto out_err;
+		}
+
+		f->fs.val.macidx = idx;
+	}
+
 	/*
 	 * If the new filter requires loopback Destination MAC and/or VLAN
 	 * rewriting then we need to allocate a Layer 2 Table (L2T) entry for
@@ -1067,6 +1086,19 @@ int cxgbe_set_filter(struct rte_eth_dev *dev, unsigned int filter_id,
 	f->fs.iq = iq;
 	f->dev = dev;
 
+	/* Allocate MPS TCAM entry to match Destination MAC. */
+	if (f->fs.mask.macidx) {
+		int idx;
+
+		idx = cxgbe_mpstcam_alloc(pi, f->fs.val.dmac, f->fs.mask.dmac);
+		if (idx <= 0) {
+			ret = -ENOMEM;
+			goto free_tid;
+		}
+
+		f->fs.val.macidx = idx;
+	}
+
 	/* Allocate a clip table entry only if we have non-zero IPv6 address. */
 	if (chip_ver > CHELSIO_T5 && f->fs.type &&
 	    memcmp(f->fs.val.lip, bitoff, sizeof(bitoff))) {
diff --git a/drivers/net/cxgbe/cxgbe_filter.h b/drivers/net/cxgbe/cxgbe_filter.h
index e79c052de..46ebf8333 100644
--- a/drivers/net/cxgbe/cxgbe_filter.h
+++ b/drivers/net/cxgbe/cxgbe_filter.h
@@ -69,8 +69,10 @@ struct ch_filter_tuple {
 	uint16_t lport;		/* local port */
 	uint16_t fport;		/* foreign port */
 
+	uint8_t dmac[6];        /* Destination MAC to match */
+
 	/* reservations for future additions */
-	uint8_t rsvd[12];
+	uint8_t rsvd[6];
 };
 
 /*
diff --git a/drivers/net/cxgbe/cxgbe_flow.c b/drivers/net/cxgbe/cxgbe_flow.c
index 166c39ba5..dd8ee7bbd 100644
--- a/drivers/net/cxgbe/cxgbe_flow.c
+++ b/drivers/net/cxgbe/cxgbe_flow.c
@@ -194,20 +194,9 @@ ch_rte_parsetype_eth(const void *dmask, const struct rte_flow_item *item,
 					  "src mac filtering not supported");
 
 	if (!rte_is_zero_ether_addr(&mask->dst)) {
-		const u8 *addr = (const u8 *)&spec->dst.addr_bytes[0];
-		const u8 *m = (const u8 *)&mask->dst.addr_bytes[0];
-		struct rte_flow *flow = (struct rte_flow *)fs->private;
-		struct port_info *pi = (struct port_info *)
-					(flow->dev->data->dev_private);
-		int idx;
-
-		idx = cxgbe_mpstcam_alloc(pi, addr, m);
-		if (idx <= 0)
-			return rte_flow_error_set(e, idx,
-						  RTE_FLOW_ERROR_TYPE_ITEM,
-						  NULL, "unable to allocate mac"
-						  " entry in h/w");
-		CXGBE_FILL_FS(idx, 0x1ff, macidx);
+		CXGBE_FILL_FS(0, 0x1ff, macidx);
+		CXGBE_FILL_FS_MEMCPY(spec->dst.addr_bytes, mask->dst.addr_bytes,
+				     dmac);
 	}
 
 	CXGBE_FILL_FS(be16_to_cpu(spec->type),
@@ -1212,17 +1201,6 @@ static int __cxgbe_flow_destroy(struct rte_eth_dev *dev, struct rte_flow *flow)
 		return ctx.result;
 	}
 
-	fs = &flow->fs;
-	if (fs->mask.macidx) {
-		struct port_info *pi = (struct port_info *)
-					(dev->data->dev_private);
-		int ret;
-
-		ret = cxgbe_mpstcam_remove(pi, fs->val.macidx);
-		if (!ret)
-			return ret;
-	}
-
 	return 0;
 }
 
-- 
2.24.0


  parent reply	other threads:[~2020-06-12 22:20 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-12 22:07 [dpdk-stable] [PATCH 0/5] net/cxgbe: fix rte_flow related hardware resource leaks Rahul Lakkireddy
2020-06-12 22:07 ` [dpdk-stable] [PATCH 1/5] net/cxgbe: fix CLIP leak in filter error path Rahul Lakkireddy
2020-06-12 22:07 ` [dpdk-stable] [PATCH 2/5] net/cxgbe: fix L2T leak in filter error and free path Rahul Lakkireddy
2020-06-12 22:07 ` Rahul Lakkireddy [this message]
2020-06-12 22:07 ` [dpdk-stable] [PATCH 4/5] net/cxgbe: fix SMT " Rahul Lakkireddy
2020-06-12 22:07 ` [dpdk-stable] [PATCH 5/5] net/cxgbe: ignore flow default masks for unrequested fields Rahul Lakkireddy
2020-06-17 13:33 ` [dpdk-stable] [PATCH 0/5] net/cxgbe: fix rte_flow related hardware resource leaks Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=98c3a261b8e69bbf58fcc65d7d741be04421615c.1591998771.git.rahul.lakkireddy@chelsio.com \
    --to=rahul.lakkireddy@chelsio.com \
    --cc=dev@dpdk.org \
    --cc=nirranjan@chelsio.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).