* [dpdk-stable] [PATCH v4] doc: add queue region feature info to release notes [not found] <20180108033953.142410-1-wei.zhao1@intel.com> @ 2018-01-19 3:28 ` Wei Zhao 2018-01-21 21:22 ` Mcnamara, John 2018-01-22 5:18 ` [dpdk-stable] [PATCH v5] " Wei Zhao 0 siblings, 2 replies; 6+ messages in thread From: Wei Zhao @ 2018-01-19 3:28 UTC (permalink / raw) To: dev; +Cc: john.mcnamara, stable, Wei Zhao This patch add inforation about i40e queue region realted to release notes, it has been missed before in v17.11 release notes. This feature has been implemented in v17.11. Signed-off-by: Wei Zhao <wei.zhao1@intel.com> --- v2: -change this information to v18.02 release notes. v3: -rework it on dpdk-next-net-intel sub tree. v4: -rework it into 17.11 release notes and i40e.rst --- doc/guides/nics/i40e.rst | 24 +++++++++++++++++++++++- doc/guides/rel_notes/release_17_11.rst | 6 ++++++ 2 files changed, 29 insertions(+), 1 deletion(-) diff --git a/doc/guides/nics/i40e.rst b/doc/guides/nics/i40e.rst index 50d5e36..345abf3 100644 --- a/doc/guides/nics/i40e.rst +++ b/doc/guides/nics/i40e.rst @@ -66,7 +66,7 @@ Features of the I40E PMD are: - IEEE1588/802.1AS timestamping - VF Daemon (VFD) - EXPERIMENTAL - Dynamic Device Personalization (DDP) - +- Queue region configuration Prerequisites ------------- @@ -430,6 +430,28 @@ For example, to use only 48bit prefix for IPv6 src address for IPv6 TCP RSS: testpmd> port config 0 pctype 43 hash_inset set field 14 testpmd> port config 0 pctype 43 hash_inset set field 15 +Queue region configuration +~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The Ethernet Controller X710/XL710 support a feature of queue regions +configuration for RSS in PF, so that different traffic classes or different +packet classification types can be separated to different queues in different +queue regions. There is an API for configuration of queue region in rss with +command line. It can parse the parameters of region index, queue number, queue +start index, user priority, traffic classes and so on. According to commands +from command line, it will call i40e private API and start the process of set +or flush queue region configuration. As this feature is specific for i40e, so +private API is used. These new commands are as below, for details please reference to +document testpmd_funcs.rst. + +.. code-block:: console + + testpmd> set port (port_id) queue-region region_id (value) \ + queue_start_index (value) queue_num (value) + testpmd> set port (port_id) queue-region region_id (value) flowtype (value) + testpmd> set port (port_id) queue-region UP (value) region_id (value) + testpmd> set port (port_id) queue-region flush (on|off) + testpmd> show port (port_id) queue-region + Limitations or Known issues --------------------------- diff --git a/doc/guides/rel_notes/release_17_11.rst b/doc/guides/rel_notes/release_17_11.rst index 016a08c..15321d6 100644 --- a/doc/guides/rel_notes/release_17_11.rst +++ b/doc/guides/rel_notes/release_17_11.rst @@ -273,6 +273,12 @@ New Features applications to classify an input packet by matching it against a set of flow rules. It uses the ``librte_table`` API to manage the flow rules. +* **Added the i40e ethernet driver to support queue region feature.** + + This feature enable queue regions configuration for RSS in PF, + so that different traffic classes or different packet + classification types can be separated into different queues in + different queue regions. Resolved Issues --------------- -- 2.9.3 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-stable] [PATCH v4] doc: add queue region feature info to release notes 2018-01-19 3:28 ` [dpdk-stable] [PATCH v4] doc: add queue region feature info to release notes Wei Zhao @ 2018-01-21 21:22 ` Mcnamara, John 2018-01-22 5:27 ` Zhao1, Wei 2018-01-22 5:18 ` [dpdk-stable] [PATCH v5] " Wei Zhao 1 sibling, 1 reply; 6+ messages in thread From: Mcnamara, John @ 2018-01-21 21:22 UTC (permalink / raw) To: Zhao1, Wei, dev; +Cc: stable > -----Original Message----- > From: Zhao1, Wei > Sent: Friday, January 19, 2018 3:28 AM > To: dev@dpdk.org > Cc: Mcnamara, John <john.mcnamara@intel.com>; stable@dpdk.org; Zhao1, Wei > <wei.zhao1@intel.com> > Subject: [PATCH v4] doc: add queue region feature info to release notes > > This patch add inforation about i40e queue region realted to release > notes, it has been missed before in v17.11 release notes. This feature has > been implemented in v17.11. > Here is a suggested reworking with minor changes and a link to the testpmd docs: Queue region configuration ~~~~~~~~~~~~~~~~~~~~~~~~~~ The Ethernet Controller X710/XL710 supports a feature of queue regions configuration for RSS in the PF, so that different traffic classes or different packet classification types can be separated to different queues in different queue regions. There is an API for configuration of queue regions in RSS with a command line. It can parse the parameters of the region index, queue number, queue start index, user priority, traffic classes and so on. Depending on commands from the command line, it will call i40e private APIs and start the process of setting or flushing the queue region configuration. As this feature is specific for i40e only private APIs are used. These new ``test_pmd`` commands are as shown below. For details please refer to :doc:`../testpmd_app_ug/index`. .. code-block:: console testpmd> set port (port_id) queue-region region_id (value) \ queue_start_index (value) queue_num (value) testpmd> set port (port_id) queue-region region_id (value) flowtype (value) testpmd> set port (port_id) queue-region UP (value) region_id (value) testpmd> set port (port_id) queue-region flush (on|off) testpmd> show port (port_id) queue-region ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-stable] [PATCH v4] doc: add queue region feature info to release notes 2018-01-21 21:22 ` Mcnamara, John @ 2018-01-22 5:27 ` Zhao1, Wei 0 siblings, 0 replies; 6+ messages in thread From: Zhao1, Wei @ 2018-01-22 5:27 UTC (permalink / raw) To: Mcnamara, John, dev; +Cc: stable Thank you for your help! I have commit a v5 patch https://dpdk.org/dev/patchwork/patch/34211/ > -----Original Message----- > From: Mcnamara, John > Sent: Monday, January 22, 2018 5:22 AM > To: Zhao1, Wei <wei.zhao1@intel.com>; dev@dpdk.org > Cc: stable@dpdk.org > Subject: RE: [PATCH v4] doc: add queue region feature info to release notes > > > > > -----Original Message----- > > From: Zhao1, Wei > > Sent: Friday, January 19, 2018 3:28 AM > > To: dev@dpdk.org > > Cc: Mcnamara, John <john.mcnamara@intel.com>; stable@dpdk.org; > Zhao1, > > Wei <wei.zhao1@intel.com> > > Subject: [PATCH v4] doc: add queue region feature info to release > > notes > > > > This patch add inforation about i40e queue region realted to release > > notes, it has been missed before in v17.11 release notes. This feature > > has been implemented in v17.11. > > > > Here is a suggested reworking with minor changes and a link to the testpmd > docs: > > Queue region configuration > ~~~~~~~~~~~~~~~~~~~~~~~~~~ > > The Ethernet Controller X710/XL710 supports a feature of queue regions > configuration for RSS in the PF, so that different traffic classes or different > packet classification types can be separated to different queues in different > queue regions. There is an API for configuration of queue regions in RSS with > a command line. It can parse the parameters of the region index, queue > number, queue start index, user priority, traffic classes and so on. Depending > on commands from the command line, it will call i40e private APIs and start > the process of setting or flushing the queue region configuration. As this > feature is specific for i40e only private APIs are used. These new ``test_pmd`` > commands are as shown below. For details please refer > to :doc:`../testpmd_app_ug/index`. > > .. code-block:: console > > testpmd> set port (port_id) queue-region region_id (value) \ > queue_start_index (value) queue_num (value) > testpmd> set port (port_id) queue-region region_id (value) flowtype > (value) > testpmd> set port (port_id) queue-region UP (value) region_id (value) > testpmd> set port (port_id) queue-region flush (on|off) > testpmd> show port (port_id) queue-region > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* [dpdk-stable] [PATCH v5] doc: add queue region feature info to release notes 2018-01-19 3:28 ` [dpdk-stable] [PATCH v4] doc: add queue region feature info to release notes Wei Zhao 2018-01-21 21:22 ` Mcnamara, John @ 2018-01-22 5:18 ` Wei Zhao 2018-01-23 10:22 ` Mcnamara, John 1 sibling, 1 reply; 6+ messages in thread From: Wei Zhao @ 2018-01-22 5:18 UTC (permalink / raw) To: dev; +Cc: john.mcnamara, thomas, stable, Wei Zhao This patch add inforation about i40e queue region realted to release notes, it has been missed before in v17.11 release notes. This feature has been implemented in v17.11. Signed-off-by: Wei Zhao <wei.zhao1@intel.com> --- v2: -change this information to v18.02 release notes. v3: -rework it on dpdk-next-net-intel sub tree. v4: -rework it into 17.11 release notes and i40e.rst. v5: -change some use of words and comment location in file. --- doc/guides/nics/i40e.rst | 25 ++++++++++++++++++++++++- doc/guides/rel_notes/release_17_11.rst | 7 +++++++ 2 files changed, 31 insertions(+), 1 deletion(-) diff --git a/doc/guides/nics/i40e.rst b/doc/guides/nics/i40e.rst index 50d5e36..29601f1 100644 --- a/doc/guides/nics/i40e.rst +++ b/doc/guides/nics/i40e.rst @@ -66,7 +66,7 @@ Features of the I40E PMD are: - IEEE1588/802.1AS timestamping - VF Daemon (VFD) - EXPERIMENTAL - Dynamic Device Personalization (DDP) - +- Queue region configuration Prerequisites ------------- @@ -430,6 +430,29 @@ For example, to use only 48bit prefix for IPv6 src address for IPv6 TCP RSS: testpmd> port config 0 pctype 43 hash_inset set field 14 testpmd> port config 0 pctype 43 hash_inset set field 15 +Queue region configuration +~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The Ethernet Controller X710/XL710 supports a feature of queue regions +configuration for RSS in the PF, so that different traffic classes or +different packet classification types can be separated to different +queues in different queue regions. There is an API for configuration +of queue regions in RSS with a command line. It can parse the parameters +of the region index, queue number, queue start index, user priority, traffic +classes and so on. Depending on commands from the command line, it will call +i40e private APIs and start the process of setting or flushing the queue +region configuration. As this feature is specific for i40e only private +APIs are used. These new ``test_pmd`` commands are as shown below. For +details please refer to :doc:`../testpmd_app_ug/index`. + +.. code-block:: console + + testpmd> set port (port_id) queue-region region_id (value) \ + queue_start_index (value) queue_num (value) + testpmd> set port (port_id) queue-region region_id (value) flowtype (value) + testpmd> set port (port_id) queue-region UP (value) region_id (value) + testpmd> set port (port_id) queue-region flush (on|off) + testpmd> show port (port_id) queue-region + Limitations or Known issues --------------------------- diff --git a/doc/guides/rel_notes/release_17_11.rst b/doc/guides/rel_notes/release_17_11.rst index c37c71a..088778b 100644 --- a/doc/guides/rel_notes/release_17_11.rst +++ b/doc/guides/rel_notes/release_17_11.rst @@ -216,6 +216,13 @@ New Features profiles which can be programmed by dynamic device personalization (DDP) process. +* **Added the i40e ethernet driver to support queue region feature.** + + This feature enable queue regions configuration for RSS in PF, + so that different traffic classes or different packet + classification types can be separated into different queues in + different queue regions. + * **Updated ipsec-secgw application to support rte_security.** Updated the ``ipsec-secgw`` sample application to support ``rte_security`` -- 2.9.3 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-stable] [PATCH v5] doc: add queue region feature info to release notes 2018-01-22 5:18 ` [dpdk-stable] [PATCH v5] " Wei Zhao @ 2018-01-23 10:22 ` Mcnamara, John 2018-01-23 15:01 ` [dpdk-stable] [dpdk-dev] " Zhang, Helin 0 siblings, 1 reply; 6+ messages in thread From: Mcnamara, John @ 2018-01-23 10:22 UTC (permalink / raw) To: Zhao1, Wei, dev; +Cc: thomas, stable > -----Original Message----- > From: Zhao1, Wei > Sent: Monday, January 22, 2018 5:19 AM > To: dev@dpdk.org > Cc: Mcnamara, John <john.mcnamara@intel.com>; thomas@monjalon.net; > stable@dpdk.org; Zhao1, Wei <wei.zhao1@intel.com> > Subject: [PATCH v5] doc: add queue region feature info to release notes > > This patch add inforation about i40e queue region realted to release > notes, it has been missed before in v17.11 release notes. This feature has > been implemented in v17.11. > > ... > +Queue region configuration > +~~~~~~~~~~~~~~~~~~~~~~~~~~~ The underline for a section header should match the length of the text and should be followed by a blank line, line in my suggested changes. See also: http://dpdk.org/doc/guides/contributing/documentation.html#section-headers However, this isn't an error so: Acked-by: John McNamara <john.mcnamara@intel.com> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH v5] doc: add queue region feature info to release notes 2018-01-23 10:22 ` Mcnamara, John @ 2018-01-23 15:01 ` Zhang, Helin 0 siblings, 0 replies; 6+ messages in thread From: Zhang, Helin @ 2018-01-23 15:01 UTC (permalink / raw) To: Mcnamara, John, Zhao1, Wei, dev; +Cc: thomas, stable > -----Original Message----- > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Mcnamara, John > Sent: Tuesday, January 23, 2018 6:22 PM > To: Zhao1, Wei; dev@dpdk.org > Cc: thomas@monjalon.net; stable@dpdk.org > Subject: Re: [dpdk-dev] [PATCH v5] doc: add queue region feature info to > release notes > > > > > -----Original Message----- > > From: Zhao1, Wei > > Sent: Monday, January 22, 2018 5:19 AM > > To: dev@dpdk.org > > Cc: Mcnamara, John <john.mcnamara@intel.com>; thomas@monjalon.net; > > stable@dpdk.org; Zhao1, Wei <wei.zhao1@intel.com> > > Subject: [PATCH v5] doc: add queue region feature info to release > > notes > > > > This patch add inforation about i40e queue region realted to release > > notes, it has been missed before in v17.11 release notes. This feature > > has been implemented in v17.11. > > > > ... > > +Queue region configuration > > +~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > The underline for a section header should match the length of the text and > should be followed by a blank line, line in my suggested changes. > > See also: > http://dpdk.org/doc/guides/contributing/documentation.html#section- > headers > > However, this isn't an error so: > > Acked-by: John McNamara <john.mcnamara@intel.com> Applied to dpdk-next-net-intel, with commit log changes. Thanks! /Helin > > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-01-23 15:01 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20180108033953.142410-1-wei.zhao1@intel.com>
2018-01-19 3:28 ` [dpdk-stable] [PATCH v4] doc: add queue region feature info to release notes Wei Zhao
2018-01-21 21:22 ` Mcnamara, John
2018-01-22 5:27 ` Zhao1, Wei
2018-01-22 5:18 ` [dpdk-stable] [PATCH v5] " Wei Zhao
2018-01-23 10:22 ` Mcnamara, John
2018-01-23 15:01 ` [dpdk-stable] [dpdk-dev] " Zhang, Helin
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).