patches for DPDK stable branches
 help / color / Atom feed
* [dpdk-stable] [PATCH] net/mlx5: fix call to modify action without init item
@ 2020-03-25 19:53 Asaf Penso
  2020-03-26  8:37 ` Matan Azrad
  2020-03-29 11:17 ` [dpdk-stable] [dpdk-dev] " Raslan Darawsheh
  0 siblings, 2 replies; 3+ messages in thread
From: Asaf Penso @ 2020-03-25 19:53 UTC (permalink / raw)
  To: dev; +Cc: viacheslavo, matan, dekelp, stable

The item is being set according to the attribute value, whether it is
udp/tcp or ipv4/6.
Also, there are two condition calls.

If the attribute is neither udp/tcp or ipv4/6 the item is not initialized
at all, but the call to the flow_dv_convert_modify_action is still being
done.
Also, even if the attribute is tcp/udp or ipv4/6, we still have two
conditions.

This patch changes the conditions, so the item will always be set.
By doing this, there is also a save in the number of condition calls.

Fixes: 4bb14c83 ("net/mlx5: support modify header using Direct Verbs")
Cc: stable@dpdk.org

Signed-off-by: Asaf Penso <asafp@mellanox.com>
Reviewed-by: Dekel Peled <dekelp@mellanox.com>
---
 drivers/net/mlx5/mlx5_flow_dv.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index 809833b..eabc745 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -702,8 +702,8 @@ struct field_modify_info modify_tcp[] = {
 		item.spec = &udp;
 		item.mask = &udp_mask;
 		field = modify_udp;
-	}
-	if (attr->tcp) {
+	} else {
+		MLX5_ASSERT(attr->tcp);
 		memset(&tcp, 0, sizeof(tcp));
 		memset(&tcp_mask, 0, sizeof(tcp_mask));
 		if (action->type == RTE_FLOW_ACTION_TYPE_SET_TP_SRC) {
@@ -773,8 +773,8 @@ struct field_modify_info modify_tcp[] = {
 		item.spec = &ipv4;
 		item.mask = &ipv4_mask;
 		field = modify_ipv4;
-	}
-	if (attr->ipv6) {
+	} else {
+		MLX5_ASSERT(attr->ipv6);
 		memset(&ipv6, 0, sizeof(ipv6));
 		memset(&ipv6_mask, 0, sizeof(ipv6_mask));
 		ipv6.hdr.hop_limits = conf->ttl_value;
@@ -834,8 +834,8 @@ struct field_modify_info modify_tcp[] = {
 		item.spec = &ipv4;
 		item.mask = &ipv4_mask;
 		field = modify_ipv4;
-	}
-	if (attr->ipv6) {
+	} else {
+		MLX5_ASSERT(attr->ipv6);
 		memset(&ipv6, 0, sizeof(ipv6));
 		memset(&ipv6_mask, 0, sizeof(ipv6_mask));
 		ipv6.hdr.hop_limits = 0xFF;
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dpdk-stable] [PATCH] net/mlx5: fix call to modify action without init item
  2020-03-25 19:53 [dpdk-stable] [PATCH] net/mlx5: fix call to modify action without init item Asaf Penso
@ 2020-03-26  8:37 ` Matan Azrad
  2020-03-29 11:17 ` [dpdk-stable] [dpdk-dev] " Raslan Darawsheh
  1 sibling, 0 replies; 3+ messages in thread
From: Matan Azrad @ 2020-03-26  8:37 UTC (permalink / raw)
  To: Asaf Penso, dev; +Cc: Slava Ovsiienko, Dekel Peled, stable



From: Asaf Penso
> The item is being set according to the attribute value, whether it is udp/tcp or
> ipv4/6.
> Also, there are two condition calls.
> 
> If the attribute is neither udp/tcp or ipv4/6 the item is not initialized at all, but
> the call to the flow_dv_convert_modify_action is still being done.
> Also, even if the attribute is tcp/udp or ipv4/6, we still have two conditions.
> 
> This patch changes the conditions, so the item will always be set.
> By doing this, there is also a save in the number of condition calls.
> 
> Fixes: 4bb14c83 ("net/mlx5: support modify header using Direct Verbs")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Asaf Penso <asafp@mellanox.com>
> Reviewed-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dpdk-stable] [dpdk-dev] [PATCH] net/mlx5: fix call to modify action without init item
  2020-03-25 19:53 [dpdk-stable] [PATCH] net/mlx5: fix call to modify action without init item Asaf Penso
  2020-03-26  8:37 ` Matan Azrad
@ 2020-03-29 11:17 ` " Raslan Darawsheh
  1 sibling, 0 replies; 3+ messages in thread
From: Raslan Darawsheh @ 2020-03-29 11:17 UTC (permalink / raw)
  To: Asaf Penso, dev; +Cc: Slava Ovsiienko, Matan Azrad, Dekel Peled, stable

Hi,
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Asaf Penso
> Sent: Wednesday, March 25, 2020 9:53 PM
> To: dev@dpdk.org
> Cc: Slava Ovsiienko <viacheslavo@mellanox.com>; Matan Azrad
> <matan@mellanox.com>; Dekel Peled <dekelp@mellanox.com>;
> stable@dpdk.org
> Subject: [dpdk-dev] [PATCH] net/mlx5: fix call to modify action without init
> item
> 
> The item is being set according to the attribute value, whether it is
> udp/tcp or ipv4/6.
> Also, there are two condition calls.
> 
> If the attribute is neither udp/tcp or ipv4/6 the item is not initialized
> at all, but the call to the flow_dv_convert_modify_action is still being
> done.
> Also, even if the attribute is tcp/udp or ipv4/6, we still have two
> conditions.
> 
> This patch changes the conditions, so the item will always be set.
> By doing this, there is also a save in the number of condition calls.
> 
> Fixes: 4bb14c83 ("net/mlx5: support modify header using Direct Verbs")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Asaf Penso <asafp@mellanox.com>
> Reviewed-by: Dekel Peled <dekelp@mellanox.com>
> ---
>  drivers/net/mlx5/mlx5_flow_dv.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c
> index 809833b..eabc745 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -702,8 +702,8 @@ struct field_modify_info modify_tcp[] = {
>  		item.spec = &udp;
>  		item.mask = &udp_mask;
>  		field = modify_udp;
> -	}
> -	if (attr->tcp) {
> +	} else {
> +		MLX5_ASSERT(attr->tcp);
>  		memset(&tcp, 0, sizeof(tcp));
>  		memset(&tcp_mask, 0, sizeof(tcp_mask));
>  		if (action->type == RTE_FLOW_ACTION_TYPE_SET_TP_SRC) {
> @@ -773,8 +773,8 @@ struct field_modify_info modify_tcp[] = {
>  		item.spec = &ipv4;
>  		item.mask = &ipv4_mask;
>  		field = modify_ipv4;
> -	}
> -	if (attr->ipv6) {
> +	} else {
> +		MLX5_ASSERT(attr->ipv6);
>  		memset(&ipv6, 0, sizeof(ipv6));
>  		memset(&ipv6_mask, 0, sizeof(ipv6_mask));
>  		ipv6.hdr.hop_limits = conf->ttl_value;
> @@ -834,8 +834,8 @@ struct field_modify_info modify_tcp[] = {
>  		item.spec = &ipv4;
>  		item.mask = &ipv4_mask;
>  		field = modify_ipv4;
> -	}
> -	if (attr->ipv6) {
> +	} else {
> +		MLX5_ASSERT(attr->ipv6);
>  		memset(&ipv6, 0, sizeof(ipv6));
>  		memset(&ipv6_mask, 0, sizeof(ipv6_mask));
>  		ipv6.hdr.hop_limits = 0xFF;
> --
> 1.8.3.1

Patch applied to next-net-mlx,

Kindest regards,
Raslan Darawsheh


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-25 19:53 [dpdk-stable] [PATCH] net/mlx5: fix call to modify action without init item Asaf Penso
2020-03-26  8:37 ` Matan Azrad
2020-03-29 11:17 ` [dpdk-stable] [dpdk-dev] " Raslan Darawsheh

patches for DPDK stable branches

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ http://inbox.dpdk.org/stable \
		stable@dpdk.org
	public-inbox-index stable


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.stable


AGPL code for this site: git clone https://public-inbox.org/ public-inbox