* [PATCH 20.11] app/testpmd: fix port status of bonding slave device
@ 2022-06-28 2:14 Huisong Li
2022-06-28 2:33 ` [PATCH 20.11 V2] " Huisong Li
0 siblings, 1 reply; 3+ messages in thread
From: Huisong Li @ 2022-06-28 2:14 UTC (permalink / raw)
To: stable, xuemingl, ktraynor; +Cc: lihuisong, liudongdong3, huangdaode
[ upstream commit e46372d7b082706718bb17981ae632e4e4d56414 ]
Starting or stopping a bonded port also starts or stops all active slaves
under the bonded port. If this port is a bonded device, we need to modify
the port status of all slaves.
Fixes: 0e545d3047fe ("app/testpmd: check stopping port is not in bonding")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
---
app/test-pmd/cmdline.c | 1 +
app/test-pmd/testpmd.c | 55 ++++++++++++++++++++++++++++++++++++++++++
app/test-pmd/testpmd.h | 3 ++-
3 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 1741d00ba8..535d199040 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -6328,6 +6328,7 @@ static void cmd_create_bonded_device_parsed(void *parsed_result,
printf("Failed to enable promiscuous mode for port %u: %s - ignore\n",
port_id, rte_strerror(-ret));
+ ports[port_id].bond_flag = 1;
ports[port_id].need_setup = 0;
ports[port_id].port_status = RTE_PORT_STOPPED;
}
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 1a7488d8dc..ec8071c3d9 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -60,6 +60,9 @@
#ifdef RTE_LIB_LATENCYSTATS
#include <rte_latencystats.h>
#endif
+#ifdef RTE_NET_BOND
+#include <rte_eth_bond.h>
+#endif
#include "testpmd.h"
@@ -2420,6 +2423,38 @@ rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
return ret;
}
+static int
+change_bonding_slave_port_status(portid_t bond_pid, bool is_stop)
+{
+#ifdef RTE_NET_BOND
+
+ portid_t slave_pids[RTE_MAX_ETHPORTS];
+ struct rte_port *port;
+ int num_slaves;
+ portid_t slave_pid;
+ int i;
+
+ num_slaves = rte_eth_bond_slaves_get(bond_pid, slave_pids,
+ RTE_MAX_ETHPORTS);
+ if (num_slaves < 0) {
+ fprintf(stderr, "Failed to get slave list for port = %u\n",
+ bond_pid);
+ return num_slaves;
+ }
+
+ for (i = 0; i < num_slaves; i++) {
+ slave_pid = slave_pids[i];
+ port = &ports[slave_pid];
+ port->port_status =
+ is_stop ? RTE_PORT_STOPPED : RTE_PORT_STARTED;
+ }
+#else
+ RTE_SET_USED(bond_pid);
+ RTE_SET_USED(is_stop);
+#endif
+ return 0;
+}
+
int
start_port(portid_t pid)
{
@@ -2603,6 +2638,15 @@ start_port(portid_t pid)
"stopped\n", pi);
continue;
}
+ /*
+ * Starting a bonded port also starts all slaves under the bonded
+ * device. So if this port is bond device, we need to modify the
+ * port status of these slaves.
+ */
+ if (port->bond_flag == 1) {
+ if (change_bonding_slave_port_status(pi, false) != 0)
+ continue;
+ }
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0)
@@ -2731,6 +2775,17 @@ stop_port(portid_t pid)
if (rte_eth_dev_stop(pi) != 0)
RTE_LOG(ERR, EAL, "rte_eth_dev_stop failed for port %u\n",
pi);
+ /*
+ * Stopping a bonded port also stops all slaves under the bonded
+ * device. So if this port is bond device, we need to modify the
+ * port status of these slaves.
+ */
+ if (port->bond_flag == 1) {
+ if(change_bonding_slave_port_status(pi, true) != 0) {
+ RTE_LOG(ERR, EAL, "Fail to change bonding slave port status %u\n",
+ pi);
+ }
+ }
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 2d4dc05332..3b4b943c96 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -219,7 +219,8 @@ struct rte_port {
struct rte_eth_txconf tx_conf[RTE_MAX_QUEUES_PER_PORT+1]; /**< per queue tx configuration */
struct rte_ether_addr *mc_addr_pool; /**< pool of multicast addrs */
uint32_t mc_addr_nb; /**< nb. of addr. in mc_addr_pool */
- uint8_t slave_flag; /**< bonding slave port */
+ uint8_t slave_flag : 1, /**< bonding slave port */
+ bond_flag : 1; /**< port is bond device */
struct port_flow *flow_list; /**< Associated flows. */
struct port_shared_action *actions_list;
/**< Associated shared actions. */
--
2.33.0
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH 20.11 V2] app/testpmd: fix port status of bonding slave device
2022-06-28 2:14 [PATCH 20.11] app/testpmd: fix port status of bonding slave device Huisong Li
@ 2022-06-28 2:33 ` Huisong Li
2022-06-28 13:35 ` Xueming(Steven) Li
0 siblings, 1 reply; 3+ messages in thread
From: Huisong Li @ 2022-06-28 2:33 UTC (permalink / raw)
To: stable, xuemingl, ktraynor; +Cc: lihuisong, liudongdong3, huangdaode
[ upstream commit e46372d7b082706718bb17981ae632e4e4d56414 ]
Starting or stopping a bonded port also starts or stops all active slaves
under the bonded port. If this port is a bonded device, we need to modify
the port status of all slaves.
Fixes: 0e545d3047fe ("app/testpmd: check stopping port is not in bonding")
---
v2:
- clear checkpatch warning
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
---
app/test-pmd/cmdline.c | 1 +
app/test-pmd/testpmd.c | 55 ++++++++++++++++++++++++++++++++++++++++++
app/test-pmd/testpmd.h | 3 ++-
3 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 1741d00ba8..535d199040 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -6328,6 +6328,7 @@ static void cmd_create_bonded_device_parsed(void *parsed_result,
printf("Failed to enable promiscuous mode for port %u: %s - ignore\n",
port_id, rte_strerror(-ret));
+ ports[port_id].bond_flag = 1;
ports[port_id].need_setup = 0;
ports[port_id].port_status = RTE_PORT_STOPPED;
}
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 1a7488d8dc..7b1d65ea08 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -60,6 +60,9 @@
#ifdef RTE_LIB_LATENCYSTATS
#include <rte_latencystats.h>
#endif
+#ifdef RTE_NET_BOND
+#include <rte_eth_bond.h>
+#endif
#include "testpmd.h"
@@ -2420,6 +2423,38 @@ rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
return ret;
}
+static int
+change_bonding_slave_port_status(portid_t bond_pid, bool is_stop)
+{
+#ifdef RTE_NET_BOND
+
+ portid_t slave_pids[RTE_MAX_ETHPORTS];
+ struct rte_port *port;
+ int num_slaves;
+ portid_t slave_pid;
+ int i;
+
+ num_slaves = rte_eth_bond_slaves_get(bond_pid, slave_pids,
+ RTE_MAX_ETHPORTS);
+ if (num_slaves < 0) {
+ fprintf(stderr, "Failed to get slave list for port = %u\n",
+ bond_pid);
+ return num_slaves;
+ }
+
+ for (i = 0; i < num_slaves; i++) {
+ slave_pid = slave_pids[i];
+ port = &ports[slave_pid];
+ port->port_status =
+ is_stop ? RTE_PORT_STOPPED : RTE_PORT_STARTED;
+ }
+#else
+ RTE_SET_USED(bond_pid);
+ RTE_SET_USED(is_stop);
+#endif
+ return 0;
+}
+
int
start_port(portid_t pid)
{
@@ -2603,6 +2638,15 @@ start_port(portid_t pid)
"stopped\n", pi);
continue;
}
+ /*
+ * Starting a bonded port also starts all slaves under the
+ * bonded device. So if this port is bond device, we need
+ * to modify the port status of these slaves.
+ */
+ if (port->bond_flag == 1) {
+ if (change_bonding_slave_port_status(pi, false) != 0)
+ continue;
+ }
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0)
@@ -2731,6 +2775,17 @@ stop_port(portid_t pid)
if (rte_eth_dev_stop(pi) != 0)
RTE_LOG(ERR, EAL, "rte_eth_dev_stop failed for port %u\n",
pi);
+ /*
+ * Stopping a bonded port also stops all slaves under the bonded
+ * device. So if this port is bond device, we need to modify the
+ * port status of these slaves.
+ */
+ if (port->bond_flag == 1) {
+ if (change_bonding_slave_port_status(pi, true) != 0) {
+ RTE_LOG(ERR, EAL, "Fail to change bonding slave port status %u\n",
+ pi);
+ }
+ }
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 2d4dc05332..3b4b943c96 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -219,7 +219,8 @@ struct rte_port {
struct rte_eth_txconf tx_conf[RTE_MAX_QUEUES_PER_PORT+1]; /**< per queue tx configuration */
struct rte_ether_addr *mc_addr_pool; /**< pool of multicast addrs */
uint32_t mc_addr_nb; /**< nb. of addr. in mc_addr_pool */
- uint8_t slave_flag; /**< bonding slave port */
+ uint8_t slave_flag : 1, /**< bonding slave port */
+ bond_flag : 1; /**< port is bond device */
struct port_flow *flow_list; /**< Associated flows. */
struct port_shared_action *actions_list;
/**< Associated shared actions. */
--
2.33.0
^ permalink raw reply [flat|nested] 3+ messages in thread* RE: [PATCH 20.11 V2] app/testpmd: fix port status of bonding slave device
2022-06-28 2:33 ` [PATCH 20.11 V2] " Huisong Li
@ 2022-06-28 13:35 ` Xueming(Steven) Li
0 siblings, 0 replies; 3+ messages in thread
From: Xueming(Steven) Li @ 2022-06-28 13:35 UTC (permalink / raw)
To: Huisong Li, stable, ktraynor; +Cc: liudongdong3, huangdaode
Thanks, applied into 20.11 LTS queue.
> -----Original Message-----
> From: Huisong Li <lihuisong@huawei.com>
> Sent: Tuesday, June 28, 2022 10:33 AM
> To: stable@dpdk.org; Xueming(Steven) Li <xuemingl@nvidia.com>; ktraynor@redhat.com
> Cc: lihuisong@huawei.com; liudongdong3@huawei.com; huangdaode@huawei.com
> Subject: [PATCH 20.11 V2] app/testpmd: fix port status of bonding slave device
>
> [ upstream commit e46372d7b082706718bb17981ae632e4e4d56414 ]
>
> Starting or stopping a bonded port also starts or stops all active slaves under the bonded port. If this port is a bonded device, we need to
> modify the port status of all slaves.
>
> Fixes: 0e545d3047fe ("app/testpmd: check stopping port is not in bonding")
>
> ---
> v2:
> - clear checkpatch warning
>
> Signed-off-by: Huisong Li <lihuisong@huawei.com>
> Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
> Acked-by: Aman Singh <aman.deep.singh@intel.com>
> Acked-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
> ---
> app/test-pmd/cmdline.c | 1 +
> app/test-pmd/testpmd.c | 55 ++++++++++++++++++++++++++++++++++++++++++
> app/test-pmd/testpmd.h | 3 ++-
> 3 files changed, 58 insertions(+), 1 deletion(-)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index 1741d00ba8..535d199040 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -6328,6 +6328,7 @@ static void cmd_create_bonded_device_parsed(void *parsed_result,
> printf("Failed to enable promiscuous mode for port %u: %s - ignore\n",
> port_id, rte_strerror(-ret));
>
> + ports[port_id].bond_flag = 1;
> ports[port_id].need_setup = 0;
> ports[port_id].port_status = RTE_PORT_STOPPED;
> }
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index 1a7488d8dc..7b1d65ea08 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -60,6 +60,9 @@
> #ifdef RTE_LIB_LATENCYSTATS
> #include <rte_latencystats.h>
> #endif
> +#ifdef RTE_NET_BOND
> +#include <rte_eth_bond.h>
> +#endif
>
> #include "testpmd.h"
>
> @@ -2420,6 +2423,38 @@ rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
> return ret;
> }
>
> +static int
> +change_bonding_slave_port_status(portid_t bond_pid, bool is_stop) {
> +#ifdef RTE_NET_BOND
> +
> + portid_t slave_pids[RTE_MAX_ETHPORTS];
> + struct rte_port *port;
> + int num_slaves;
> + portid_t slave_pid;
> + int i;
> +
> + num_slaves = rte_eth_bond_slaves_get(bond_pid, slave_pids,
> + RTE_MAX_ETHPORTS);
> + if (num_slaves < 0) {
> + fprintf(stderr, "Failed to get slave list for port = %u\n",
> + bond_pid);
> + return num_slaves;
> + }
> +
> + for (i = 0; i < num_slaves; i++) {
> + slave_pid = slave_pids[i];
> + port = &ports[slave_pid];
> + port->port_status =
> + is_stop ? RTE_PORT_STOPPED : RTE_PORT_STARTED;
> + }
> +#else
> + RTE_SET_USED(bond_pid);
> + RTE_SET_USED(is_stop);
> +#endif
> + return 0;
> +}
> +
> int
> start_port(portid_t pid)
> {
> @@ -2603,6 +2638,15 @@ start_port(portid_t pid)
> "stopped\n", pi);
> continue;
> }
> + /*
> + * Starting a bonded port also starts all slaves under the
> + * bonded device. So if this port is bond device, we need
> + * to modify the port status of these slaves.
> + */
> + if (port->bond_flag == 1) {
> + if (change_bonding_slave_port_status(pi, false) != 0)
> + continue;
> + }
>
> if (rte_atomic16_cmpset(&(port->port_status),
> RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0) @@ -2731,6 +2775,17 @@ stop_port(portid_t pid)
> if (rte_eth_dev_stop(pi) != 0)
> RTE_LOG(ERR, EAL, "rte_eth_dev_stop failed for port %u\n",
> pi);
> + /*
> + * Stopping a bonded port also stops all slaves under the bonded
> + * device. So if this port is bond device, we need to modify the
> + * port status of these slaves.
> + */
> + if (port->bond_flag == 1) {
> + if (change_bonding_slave_port_status(pi, true) != 0) {
> + RTE_LOG(ERR, EAL, "Fail to change bonding slave port status %u\n",
> + pi);
> + }
> + }
>
> if (rte_atomic16_cmpset(&(port->port_status),
> RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0) diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index 2d4dc05332..3b4b943c96 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -219,7 +219,8 @@ struct rte_port {
> struct rte_eth_txconf tx_conf[RTE_MAX_QUEUES_PER_PORT+1]; /**< per queue tx configuration */
> struct rte_ether_addr *mc_addr_pool; /**< pool of multicast addrs */
> uint32_t mc_addr_nb; /**< nb. of addr. in mc_addr_pool */
> - uint8_t slave_flag; /**< bonding slave port */
> + uint8_t slave_flag : 1, /**< bonding slave port */
> + bond_flag : 1; /**< port is bond device */
> struct port_flow *flow_list; /**< Associated flows. */
> struct port_shared_action *actions_list;
> /**< Associated shared actions. */
> --
> 2.33.0
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-06-28 13:35 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-06-28 2:14 [PATCH 20.11] app/testpmd: fix port status of bonding slave device Huisong Li
2022-06-28 2:33 ` [PATCH 20.11 V2] " Huisong Li
2022-06-28 13:35 ` Xueming(Steven) Li
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).