patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Suanming Mou <suanmingm@mellanox.com>
To: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
	"stable@dpdk.org" <stable@dpdk.org>,
	Matan Azrad <matan@mellanox.com>,
	Slava Ovsiienko <viacheslavo@mellanox.com>
Subject: Re: [dpdk-stable] [PATCH] net/mlx5: allow install more meter actions
Date: Wed, 8 Jan 2020 13:30:48 +0000	[thread overview]
Message-ID: <HE1PR05MB3484399F21210158CB438B76CC3E0@HE1PR05MB3484.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <CAMDZJNW6=uT5aoZXnA5c9rUyYh9qj+YWcniWH9kSY8c_btY_kA@mail.gmail.com>

Hi,

> -----Original Message-----
> From: Tonghao Zhang <xiangxia.m.yue@gmail.com>
> Sent: Monday, January 6, 2020 9:47 AM
> To: Suanming Mou <suanmingm@mellanox.com>
> Cc: dev@dpdk.org; stable@dpdk.org; Matan Azrad <matan@mellanox.com>;
> Slava Ovsiienko <viacheslavo@mellanox.com>
> Subject: Re: [PATCH] net/mlx5: allow install more meter actions
> 
> On Fri, Jan 3, 2020 at 11:38 AM Suanming Mou <suanmingm@mellanox.com>
> wrote:
> >
> > Hello Tonghao,
> >
> > Could you please explain much detail about your issue scenario?
> >
> > If I understand correctly, you are trying to create two flows with the two same
> match criteria?
> >
> > Example from testpmd just like that:
> > add port meter profile srtcm_rfc2697 0 24 65536 32768 0 create port
> > meter 0 0 24 yes G Y D 0xffff 1 0 flow create 0 ingress pattern eth /
> > end actions  jump group 1 / end flow create 0 priority 3 group 1
> > ingress pattern eth / end actions meter mtr_id 0 / queue index 0 / end
> > flow create 0 priority 3 group 1 ingress pattern eth / end actions
> > meter mtr_id 0 / queue index 1 / end
> >
> > Then the third flow will report "hardware refuses to create flow: Invalid
> argument".
> >
> > Please correct me if I'm wrong.
> > And better to give the issue reproduce method via testpmd cmdline.
> ./testpmd -l 0-3 -n 4 -w 0000:82:00.0 -w 0000:82:00.1 -- -i
> --portmask=0x3 --rxq=2  --nb-cores=2
> 
> add port meter profile srtcm_rfc2697 0 100 1024 1024 0 add port meter profile
> srtcm_rfc2697 0 101 2048 2048 0 create port  meter 0 100 100 yes G Y D 0xffff 1
> 0 create port  meter 0 101 101 yes G Y D 0xffff 1 0
> 
> flow create 0 ingress pattern eth / end actions  jump group 1 / end flow create 0
> group 1 priority 3 ingress pattern eth / ipv4 dst is
> 1.1.1.100  / end actions meter mtr_id 100 / queue index 0 / end
> 
> The one of  commands below will run fail:
> flow create 0 group 1 priority 3 ingress pattern eth / ipv4 dst is
> 1.1.1.200  / end actions meter mtr_id 101 / queue index 1 / end flow create 0
> group 1 priority 3 ingress pattern eth / ipv4 dst is
> 1.1.1.200  / tcp dst is 80 / end actions meter mtr_id 101 / queue index 1 / end
> flow create 0 group 1 priority 3 ingress pattern eth / ipv4 / tcp dst is 80 / end
> actions meter mtr_id 101 / queue index 1 / end
> 
> Caught error type 1 (cause unspecified): hardware refuses to create
> flow: Invalid argument
> 
> And with this patch, it works fine.
> > Thanks
> > SuanmingMou
> >
> > > -----Original Message-----
> > > From: Tonghao Zhang <xiangxia.m.yue@gmail.com>
> > > Sent: Thursday, December 19, 2019 6:00 PM
> > > To: Suanming Mou <suanmingm@mellanox.com>
> > > Cc: dev@dpdk.org; stable@dpdk.org
> > > Subject: Re: [PATCH] net/mlx5: allow install more meter actions
> > >
> > > ping
> > >
> > > On Tue, Dec 17, 2019 at 3:29 PM <xiangxia.m.yue@gmail.com> wrote:
> > > >
> > > > From: Tonghao Zhang <xiangxia.m.yue@gmail.com>
> > > >
> > > > When creating the dr rule of meter, the matcher which struct is
> > > > "struct mlx5dv_dr_matcher" should not be shared, if shared,
> > > > mlx5dv_dr_rule_create will return NULL. We can't install more
> > > > metering offload actions.
> > > >
> > > > The call tree (rdma-core-47mlnx1 OFED 4.7-3.2.9):
> > > > * dr_rule_handle_ste_branch
> > > > * dr_rule_create_rule_nic
> > > > * dr_rule_create_rule_fdb
> > > > * dr_rule_create_rule
> > > > * mlx5dv_dr_rule_create
> > > >
> > > > In the dr_rule_handle_ste_branch, if ste is not used,
> > > > mlx5dv_dr_rule_create will return rule, if the ste is used, and
> > > > the ste is the last in the rule, mlx5dv_dr_rule_create will return NULL.
> > > >
> > > > dr_rule_handle_ste_branch:
> > > >     if dr_ste_not_used_ste
> > > >         dr_rule_handle_empty_entry
> > > >     else
> > > >         dr_rule_find_ste_in_miss_list
> > > >         dr_ste_is_last_in_rule: if so return NULL and set errno =
> > > > EINVAL;
> > > >
> > > > Fixes: 9ea9b049a960 ("net/mlx5: split meter flow")
> > > > Cc: Suanming Mou <suanmingm@mellanox.com>
> > > > Cc: stable@dpdk.org
> > > >
> > > > Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
NACK, as we have another fix about that:
https://patches.dpdk.org/patch/64288/
> > > > ---
> > > >  drivers/net/mlx5/mlx5_flow.c    | 20 +++++++++++++-------
> > > >  drivers/net/mlx5/mlx5_flow.h    |  2 ++
> > > >  drivers/net/mlx5/mlx5_flow_dv.c |  5 +++++
> > > >  3 files changed, 20 insertions(+), 7 deletions(-)
> > > >
> > > > diff --git a/drivers/net/mlx5/mlx5_flow.c
> > > > b/drivers/net/mlx5/mlx5_flow.c index 0087163..f8cdc25 100644
> > > > --- a/drivers/net/mlx5/mlx5_flow.c
> > > > +++ b/drivers/net/mlx5/mlx5_flow.c
> > > > @@ -3421,7 +3421,9 @@ uint32_t mlx5_flow_adjust_priority(struct
> > > rte_eth_dev *dev, int32_t priority,
> > > >                         const struct rte_flow_attr *attr,
> > > >                         const struct rte_flow_item items[],
> > > >                         const struct rte_flow_action actions[],
> > > > -                       bool external, struct rte_flow_error *error)
> > > > +                       bool external,
> > > > +                       bool shared,
> > > > +                       struct rte_flow_error *error)
> > > >  {
> > > >         struct mlx5_flow *dev_flow;
> > > >
> > > > @@ -3434,6 +3436,7 @@ uint32_t mlx5_flow_adjust_priority(struct
> > > rte_eth_dev *dev, int32_t priority,
> > > >         LIST_INSERT_HEAD(&flow->dev_flows, dev_flow, next);
> > > >         if (sub_flow)
> > > >                 *sub_flow = dev_flow;
> > > > +       dev_flow->matcher_shared = shared;
> > > >         return flow_drv_translate(dev, dev_flow, attr, items,
> > > > actions, error);  }
> > > >
> > > > @@ -3741,7 +3744,9 @@ uint32_t mlx5_flow_adjust_priority(struct
> > > rte_eth_dev *dev, int32_t priority,
> > > >                            const struct rte_flow_attr *attr,
> > > >                            const struct rte_flow_item items[],
> > > >                            const struct rte_flow_action actions[],
> > > > -                          bool external, struct rte_flow_error *error)
> > > > +                          bool external,
> > > > +                          bool shared,
> > > > +                          struct rte_flow_error *error)
> > > >  {
> > > >         struct mlx5_priv *priv = dev->data->dev_private;
> > > >         struct mlx5_dev_config *config = &priv->config; @@ -3759,7
> > > > +3764,8 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev
> > > > +*dev,
> > > int32_t priority,
> > > >             config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
> > > >             !mlx5_flow_ext_mreg_supported(dev))
> > > >                 return flow_create_split_inner(dev, flow, NULL, attr, items,
> > > > -                                              actions, external, error);
> > > > +                                              actions, external,
> > > > +                                              shared, error);
> > > >         actions_n = flow_parse_qrss_action(actions, &qrss);
> > > >         if (qrss) {
> > > >                 /* Exclude hairpin flows from splitting. */ @@
> > > > -3842,7
> > > > +3848,7 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev
> > > > +*dev,
> > > int32_t priority,
> > > >         /* Add the unmodified original or prefix subflow. */
> > > >         ret = flow_create_split_inner(dev, flow, &dev_flow, attr, items,
> > > >                                       ext_actions ? ext_actions : actions,
> > > > -                                     external, error);
> > > > +                                     external, shared, error);
> > > >         if (ret < 0)
> > > >                 goto exit;
> > > >         assert(dev_flow);
> > > > @@ -3906,7 +3912,7 @@ uint32_t mlx5_flow_adjust_priority(struct
> > > rte_eth_dev *dev, int32_t priority,
> > > >                 ret = flow_create_split_inner(dev, flow, &dev_flow,
> > > >                                               &q_attr, mtr_sfx ? items :
> > > >                                               q_items, q_actions,
> > > > -                                             external, error);
> > > > +                                             external, shared,
> > > > + error);
> > > >                 if (ret < 0)
> > > >                         goto exit;
> > > >                 assert(dev_flow);
> > > > @@ -3999,7 +4005,7 @@ uint32_t mlx5_flow_adjust_priority(struct
> > > rte_eth_dev *dev, int32_t priority,
> > > >                 }
> > > >                 /* Add the prefix subflow. */
> > > >                 ret = flow_create_split_inner(dev, flow, &dev_flow, attr, items,
> > > > -                                                 pre_actions, external, error);
> > > > +                                             pre_actions,
> > > > + external, false, error);
> > > >                 if (ret) {
> > > >                         ret = -rte_errno;
> > > >                         goto exit; @@ -4035,7 +4041,7 @@ uint32_t
> > > > mlx5_flow_adjust_priority(struct
> > > rte_eth_dev *dev, int32_t priority,
> > > >         ret = flow_create_split_metadata(dev, flow, &sfx_attr,
> > > >                                          sfx_items ? sfx_items : items,
> > > >                                          sfx_actions ? sfx_actions : actions,
> > > > -                                        external, error);
> > > > +                                        external, sfx_items ==
> > > > + NULL, error);
> > > >  exit:
> > > >         if (sfx_actions)
> > > >                 rte_free(sfx_actions); diff --git
> > > > a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> > > > index 3fff5dd..84636be 100644
> > > > --- a/drivers/net/mlx5/mlx5_flow.h
> > > > +++ b/drivers/net/mlx5/mlx5_flow.h
> > > > @@ -338,6 +338,7 @@ struct mlx5_flow_dv_matcher {
> > > >         /**< Pointer to the table(group) the matcher associated with. */
> > > >         rte_atomic32_t refcnt; /**< Reference counter. */
> > > >         void *matcher_object; /**< Pointer to DV matcher */
> > > > +       bool shared;
> > > >         uint16_t crc; /**< CRC of key. */
> > > >         uint16_t priority; /**< Priority of matcher. */
> > > >         struct mlx5_flow_dv_match_params mask; /**< Matcher mask.
> > > > */ @@ -532,6 +533,7 @@ struct mlx5_flow {
> > > >                 uint32_t mtr_flow_id; /**< Unique meter match flow id. */
> > > >         };
> > > >         bool external; /**< true if the flow is created external
> > > > to PMD. */
> > > > +       bool matcher_shared;
> > > >  };
> > > >
> > > >  /* Flow meter state. */
> > > > diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> > > > b/drivers/net/mlx5/mlx5_flow_dv.c index 7528556..362c36c 100644
> > > > --- a/drivers/net/mlx5/mlx5_flow_dv.c
> > > > +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> > > > @@ -6324,10 +6324,13 @@ struct field_modify_info modify_tcp[] = {
> > > >         if (!tbl)
> > > >                 return -rte_errno;      /* No need to refill the error info */
> > > >         tbl_data = container_of(tbl, struct
> > > > mlx5_flow_tbl_data_entry, tbl);
> > > > +       if (!dev_flow->matcher_shared)
> > > > +               goto create_matcher;
> > > >         /* Lookup from cache. */
> > > >         LIST_FOREACH(cache_matcher, &tbl_data->matchers, next) {
> > > >                 if (matcher->crc == cache_matcher->crc &&
> > > >                     matcher->priority == cache_matcher->priority
> > > > &&
> > > > +                   cache_matcher->shared &&
> > > >                     !memcmp((const void *)matcher->mask.buf,
> > > >                             (const void *)cache_matcher->mask.buf,
> > > >                             cache_matcher->mask.size)) { @@
> > > > -6346,6
> > > > +6349,7 @@ struct field_modify_info modify_tcp[] = {
> > > >                         return 0;
> > > >                 }
> > > >         }
> > > > +create_matcher:
> > > >         /* Register new matcher. */
> > > >         cache_matcher = rte_calloc(__func__, 1, sizeof(*cache_matcher), 0);
> > > >         if (!cache_matcher) {
> > > > @@ -6355,6 +6359,7 @@ struct field_modify_info modify_tcp[] = {
> > > >                                           "cannot allocate matcher memory");
> > > >         }
> > > >         *cache_matcher = *matcher;
> > > > +       cache_matcher->shared = dev_flow->matcher_shared;
> > > >         dv_attr.match_criteria_enable =
> > > >                 flow_dv_matcher_enable(cache_matcher->mask.buf);
> > > >         dv_attr.priority = matcher->priority;
> > > > --
> > > > 1.8.3.1
> > > >

      parent reply	other threads:[~2020-01-08 13:30 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-17  7:29 xiangxia.m.yue
2019-12-19  9:59 ` Tonghao Zhang
2020-01-03  3:38   ` Suanming Mou
2020-01-06  1:46     ` Tonghao Zhang
2020-01-08 13:28       ` Suanming Mou
2020-01-08 13:30       ` Suanming Mou [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=HE1PR05MB3484399F21210158CB438B76CC3E0@HE1PR05MB3484.eurprd05.prod.outlook.com \
    --to=suanmingm@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=matan@mellanox.com \
    --cc=stable@dpdk.org \
    --cc=viacheslavo@mellanox.com \
    --cc=xiangxia.m.yue@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).