patches for DPDK stable branches
 help / color / mirror / Atom feed
From: "Zhao1, Wei" <wei.zhao1@intel.com>
To: "Zhang, Qi Z" <qi.z.zhang@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "stable@dpdk.org" <stable@dpdk.org>, "Lu, Nannan" <nannan.lu@intel.com>
Subject: Re: [dpdk-stable] [PATCH v3 3/4] net/ice: support switch flow for specific L4 type
Date: Mon, 29 Jun 2020 02:01:42 +0000	[thread overview]
Message-ID: <MWHPR11MB13916C9F537CFB55D71BABCAB76E0@MWHPR11MB1391.namprd11.prod.outlook.com> (raw)
In-Reply-To: <039ED4275CED7440929022BC67E7061154847C39@SHSMSX103.ccr.corp.intel.com>

Hi, 

> -----Original Message-----
> From: Zhang, Qi Z <qi.z.zhang@intel.com>
> Sent: Monday, June 29, 2020 9:56 AM
> To: Zhao1, Wei <wei.zhao1@intel.com>; dev@dpdk.org
> Cc: stable@dpdk.org; Lu, Nannan <nannan.lu@intel.com>
> Subject: RE: [PATCH v3 3/4] net/ice: support switch flow for specific L4 type
> 
> 
> 
> > -----Original Message-----
> > From: Zhao1, Wei <wei.zhao1@intel.com>
> > Sent: Sunday, June 28, 2020 1:02 PM
> > To: dev@dpdk.org
> > Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Lu, Nannan
> > <nannan.lu@intel.com>; Zhao1, Wei <wei.zhao1@intel.com>
> > Subject: [PATCH v3 3/4] net/ice: support switch flow for specific L4
> > type
> >
> > This patch add more specific tunnel type for ipv4/ipv6 packet, it
> > enable tcp/udp layer of ipv4/ipv6 as L4 payload but without
> > L4 dst/src port number as input set for the switch filter rule.
> >
> > Fixes: 47d460d63233 ("net/ice: rework switch filter")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
> > ---
> >  drivers/net/ice/ice_switch_filter.c | 27 ++++++++++++++++++++-------
> >  1 file changed, 20 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/net/ice/ice_switch_filter.c
> > b/drivers/net/ice/ice_switch_filter.c
> > index c607e8d17..c1ea74c73 100644
> > --- a/drivers/net/ice/ice_switch_filter.c
> > +++ b/drivers/net/ice/ice_switch_filter.c
> > @@ -29,6 +29,8 @@
> >  #define ICE_PPP_IPV4_PROTO	0x0021
> >  #define ICE_PPP_IPV6_PROTO	0x0057
> >  #define ICE_IPV4_PROTO_NVGRE	0x002F
> > +#define ICE_TUN_VXLAN_VALID	0x0001
> > +#define ICE_TUN_NVGRE_VALID	0x0002
> 
> Why not apply the same pattern with other valid flag?
> I mean use vxlan_valid and nvgre_valid.
> Could be tunnel_valid = vxlan_valid | nvgre_valid.

Because we will extend to gtp-u or other kinds of packet, there will be more and more xxx_valid variable.
I think we can follow rte layer to use bit define kinds of tunnel packet.
It is too complex to define too many valid flag.

> 
> >
> >  #define ICE_SW_INSET_ETHER ( \
> >  	ICE_INSET_DMAC | ICE_INSET_SMAC | ICE_INSET_ETHERTYPE) @@
> > -471,11 +473,11 @@ ice_switch_inset_get(const struct rte_flow_item
> > pattern[],
> >  	const struct rte_flow_item_l2tpv3oip *l2tp_spec, *l2tp_mask;
> >  	const struct rte_flow_item_pfcp *pfcp_spec, *pfcp_mask;
> >  	uint64_t input_set = ICE_INSET_NONE;
> > +	uint16_t tunnel_valid = 0;
> >  	bool pppoe_elem_valid = 0;
> >  	bool pppoe_patt_valid = 0;
> >  	bool pppoe_prot_valid = 0;
> >  	bool profile_rule = 0;
> > -	bool tunnel_valid = 0;
> >  	bool ipv6_valiad = 0;
> >  	bool ipv4_valiad = 0;
> >  	bool udp_valiad = 0;
> > @@ -924,7 +926,7 @@ ice_switch_inset_get(const struct rte_flow_item
> > pattern[],
> >  				return 0;
> >  			}
> >
> > -			tunnel_valid = 1;
> > +			tunnel_valid = ICE_TUN_VXLAN_VALID;
> >  			if (vxlan_spec && vxlan_mask) {
> >  				list[t].type = ICE_VXLAN;
> >  				if (vxlan_mask->vni[0] ||
> > @@ -960,7 +962,7 @@ ice_switch_inset_get(const struct rte_flow_item
> > pattern[],
> >  					   "Invalid NVGRE item");
> >  				return 0;
> >  			}
> > -			tunnel_valid = 1;
> > +			tunnel_valid = ICE_TUN_NVGRE_VALID;
> >  			if (nvgre_spec && nvgre_mask) {
> >  				list[t].type = ICE_NVGRE;
> >  				if (nvgre_mask->tni[0] ||
> > @@ -1325,6 +1327,21 @@ ice_switch_inset_get(const struct rte_flow_item
> > pattern[],
> >  			*tun_type = ICE_SW_TUN_PPPOE;
> >  	}
> >
> > +	if (*tun_type == ICE_NON_TUN) {
> > +		if (tunnel_valid == ICE_TUN_VXLAN_VALID)
> > +			*tun_type = ICE_SW_TUN_VXLAN;
> > +		else if (tunnel_valid == ICE_TUN_NVGRE_VALID)
> > +			*tun_type = ICE_SW_TUN_NVGRE;
> > +		else if (ipv4_valiad && tcp_valiad)
> > +			*tun_type = ICE_SW_IPV4_TCP;
> > +		else if (ipv4_valiad && udp_valiad)
> > +			*tun_type = ICE_SW_IPV4_UDP;
> > +		else if (ipv6_valiad && tcp_valiad)
> > +			*tun_type = ICE_SW_IPV6_TCP;
> > +		else if (ipv6_valiad && udp_valiad)
> > +			*tun_type = ICE_SW_IPV6_UDP;
> > +	}
> > +
> >  	*lkups_num = t;
> >
> >  	return input_set;
> > @@ -1536,10 +1553,6 @@ ice_switch_parse_pattern_action(struct
> > ice_adapter *ad,
> >
> >  	for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
> >  		item_num++;
> > -		if (item->type == RTE_FLOW_ITEM_TYPE_VXLAN)
> > -			tun_type = ICE_SW_TUN_VXLAN;
> > -		if (item->type == RTE_FLOW_ITEM_TYPE_NVGRE)
> > -			tun_type = ICE_SW_TUN_NVGRE;
> >  		if (item->type == RTE_FLOW_ITEM_TYPE_ETH) {
> >  			const struct rte_flow_item_eth *eth_mask;
> >  			if (item->mask)
> > --
> > 2.19.1
> 


  reply	other threads:[~2020-06-29  2:01 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200605074031.16231-1-wei.zhao1@intel.com>
2020-06-05  7:40 ` [dpdk-stable] [PATCH 2/4] net/ice: add redirect support for VSI list rule Wei Zhao
2020-06-05  7:40 ` [dpdk-stable] [PATCH 3/4] net/ice: add check for NVGRE protocol Wei Zhao
2020-06-05  7:40 ` [dpdk-stable] [PATCH 4/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-17  6:14 ` [dpdk-stable] [PATCH v2 0/4] enable more PPPoE packet type for switch Wei Zhao
2020-06-17  6:14   ` [dpdk-stable] [PATCH v2 1/4] net/ice: add support " Wei Zhao
2020-06-17  6:14   ` [dpdk-stable] [PATCH v2 2/4] net/ice: add redirect support for VSI list rule Wei Zhao
2020-06-22 15:25     ` Zhang, Qi Z
2020-06-17  6:14   ` [dpdk-stable] [PATCH v2 3/4] net/ice: add check for NVGRE protocol Wei Zhao
2020-06-22 15:49     ` Zhang, Qi Z
2020-06-23  1:11       ` Zhao1, Wei
2020-06-17  6:14   ` [dpdk-stable] [PATCH v2 4/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-22 15:36     ` Zhang, Qi Z
2020-06-23  1:12       ` Zhao1, Wei
2020-06-28  3:21   ` [dpdk-stable] [PATCH v3 0/4] enable more PPPoE packet type for switch Wei Zhao
2020-06-28  3:21     ` [dpdk-stable] [PATCH v3 1/4] net/ice: add support " Wei Zhao
2020-06-28  3:21     ` [dpdk-stable] [PATCH v3 2/4] net/ice: fix tunnel type for switch rule Wei Zhao
2020-06-28  3:21     ` [dpdk-stable] [PATCH v3 3/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-28  3:21     ` [dpdk-stable] [PATCH v3 4/4] net/ice: add input set byte number check Wei Zhao
2020-06-28  5:01   ` [dpdk-stable] [PATCH v3 0/4] enable more PPPoE packet type for switch Wei Zhao
2020-06-28  5:01     ` [dpdk-stable] [PATCH v3 1/4] net/ice: add support " Wei Zhao
2020-06-28  5:01     ` [dpdk-stable] [PATCH v3 2/4] net/ice: fix tunnel type for switch rule Wei Zhao
2020-06-28  5:01     ` [dpdk-stable] [PATCH v3 3/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-29  1:55       ` Zhang, Qi Z
2020-06-29  2:01         ` Zhao1, Wei [this message]
2020-06-28  5:01     ` [dpdk-stable] [PATCH v3 4/4] net/ice: add input set byte number check Wei Zhao
2020-06-28  5:28     ` [dpdk-stable] [PATCH v4 0/4] enable more PPPoE packet type for switch Wei Zhao
2020-06-28  5:28       ` [dpdk-stable] [PATCH v4 1/4] net/ice: add support " Wei Zhao
2020-06-28  5:28       ` [dpdk-stable] [PATCH v4 2/4] net/ice: fix tunnel type for switch rule Wei Zhao
2020-06-28  5:28       ` [dpdk-stable] [PATCH v4 3/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-28  5:28       ` [dpdk-stable] [PATCH v4 4/4] net/ice: add input set byte number check Wei Zhao
2020-06-29  5:10       ` [dpdk-stable] [PATCH v5 0/5] enable more PPPoE packet type for switch Wei Zhao
2020-06-29  5:10         ` [dpdk-stable] [PATCH v5 1/5] net/ice: add support " Wei Zhao
2020-06-29  5:10         ` [dpdk-stable] [PATCH v5 2/5] net/ice: fix tunnel type for switch rule Wei Zhao
2020-06-29  5:10         ` [dpdk-stable] [PATCH v5 3/5] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-29  5:10         ` [dpdk-stable] [PATCH v5 4/5] net/ice: add input set byte number check Wei Zhao
2020-06-29  5:10         ` [dpdk-stable] [PATCH v5 5/5] net/ice: fix typo Wei Zhao
2020-07-03  2:47         ` [dpdk-stable] [PATCH v5 0/5] enable more PPPoE packet type for switch Lu, Nannan
2020-07-03  6:19         ` [dpdk-stable] [PATCH v6 " Wei Zhao
2020-07-03  6:19           ` [dpdk-stable] [PATCH v6 1/5] net/ice: add support more PPPoE packeat " Wei Zhao
2020-07-03  6:19           ` [dpdk-stable] [PATCH v6 2/5] net/ice: fix tunnel type for switch rule Wei Zhao
2020-07-03  6:19           ` [dpdk-stable] [PATCH v6 3/5] net/ice: support switch flow for specific L4 type Wei Zhao
2020-07-03  6:19           ` [dpdk-stable] [PATCH v6 4/5] net/ice: add input set byte number check Wei Zhao
2020-07-03  6:19           ` [dpdk-stable] [PATCH v6 5/5] net/ice: fix typo Wei Zhao
2020-07-03 13:46           ` [dpdk-stable] [PATCH v6 0/5] enable more PPPoE packet type for switch Zhang, Qi Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=MWHPR11MB13916C9F537CFB55D71BABCAB76E0@MWHPR11MB1391.namprd11.prod.outlook.com \
    --to=wei.zhao1@intel.com \
    --cc=dev@dpdk.org \
    --cc=nannan.lu@intel.com \
    --cc=qi.z.zhang@intel.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).