[dpdk-stable] [PATCH 1/5] net/mlx5: fix Memory Region cache lookup

[dpdk-stable] [PATCH 1/5] net/mlx5: fix Memory Region cache lookup

[Shahaf Shuler]

The memory registration (MR) cache contains pointers to mlx5_mr.
The MR cache indexes are filled when a new MR is created. As it is
possible for MR to be created on the flight, an extra validation must be
added to avoid segmentation fault.

Fixes: 6cb559d67b83 ("net/mlx5: add vectorized Rx/Tx burst for x86")
Cc: stable@dpdk.org
Cc: yskoh@mellanox.com

Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
---
 drivers/net/mlx5/mlx5_rxtx.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index 2eb2f0506..a63364d79 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h
@@ -555,7 +555,8 @@ mlx5_tx_mb2mr(struct mlx5_txq_data *txq, struct rte_mbuf *mb)
 	if (likely(txq->mp2mr[i]->start <= addr && txq->mp2mr[i]->end >= addr))
 		return txq->mp2mr[i]->lkey;
 	for (i = 0; (i != RTE_DIM(txq->mp2mr)); ++i) {
-		if (unlikely(txq->mp2mr[i]->mr == NULL)) {
+		if (unlikely(txq->mp2mr[i] == NULL ||
+		    txq->mp2mr[i]->mr == NULL)) {
 			/* Unknown MP, add a new MR for it. */
 			break;
 		}
-- 
2.12.0

[dpdk-stable] [PATCH 2/5] net/mlx5: fix secondary process mempool registration

[Shahaf Shuler]

Secondary process is not allowed to register mempools on the flight.

The code will return invalid memory key for such case.

Fixes: 87ec44ce1651 ("net/mlx5: add operations for secondary process")
Cc: stable@dpdk.org

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
---
 doc/guides/nics/mlx5.rst     |  7 ++++++-
 drivers/net/mlx5/mlx5_rxtx.h | 17 ++++++++++++++---
 2 files changed, 20 insertions(+), 4 deletions(-)

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index bdc2216c0..2f860402f 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -106,7 +106,12 @@ Limitations
 
 - Inner RSS for VXLAN frames is not supported yet.
 - Hardware checksum RX offloads for VXLAN inner header are not supported yet.
-- Forked secondary process not supported.
+- For secondary process:
+
+  - Forked secondary process not supported.
+  - All mempools must be initialized before rte_eth_dev_start().
+  - Number of mempools must less than CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE
+
 - Flow pattern without any specific vlan will match for vlan packets as well:
 
   When VLAN spec is not specified in the pattern, the matching rule will be created with VLAN as a wild card.
diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index a63364d79..79cdfc793 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h
@@ -550,6 +550,7 @@ mlx5_tx_mb2mr(struct mlx5_txq_data *txq, struct rte_mbuf *mb)
 	uint16_t i = txq->mr_cache_idx;
 	uintptr_t addr = rte_pktmbuf_mtod(mb, uintptr_t);
 	struct mlx5_mr *mr;
+	struct rte_mempool *mp;
 
 	assert(i < RTE_DIM(txq->mp2mr));
 	if (likely(txq->mp2mr[i]->start <= addr && txq->mp2mr[i]->end >= addr))
@@ -563,14 +564,24 @@ mlx5_tx_mb2mr(struct mlx5_txq_data *txq, struct rte_mbuf *mb)
 		if (txq->mp2mr[i]->start <= addr &&
 		    txq->mp2mr[i]->end >= addr) {
 			assert(txq->mp2mr[i]->lkey != (uint32_t)-1);
-			assert(rte_cpu_to_be_32(txq->mp2mr[i]->mr->lkey) ==
-			       txq->mp2mr[i]->lkey);
+			if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+				assert(rte_cpu_to_be_32(txq->mp2mr[i]->mr->lkey)
+				       == txq->mp2mr[i]->lkey);
+			}
 			txq->mr_cache_idx = i;
 			return txq->mp2mr[i]->lkey;
 		}
 	}
 	txq->mr_cache_idx = 0;
-	mr = mlx5_txq_mp2mr_reg(txq, mlx5_tx_mb2mp(mb), i);
+	mp = mlx5_tx_mb2mp(mb);
+	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+		WARN("Using unregistered mempool 0x%p(%s) in secondary process,"
+		     " please create mempool before rte_eth_dev_start()",
+		     (void *)mp, mp->name);
+		assert(rte_eal_process_type() == RTE_PROC_PRIMARY);
+		return (uint32_t)-1;
+	}
+	mr = mlx5_txq_mp2mr_reg(txq, mp, i);
 	/*
 	 * Request the reference to use in this queue, the original one is
 	 * kept by the control plane.
-- 
2.12.0

Re: [dpdk-stable] [PATCH 2/5] net/mlx5: fix secondary process mempool registration

[Nélio Laranjeiro]

Hi Shahaf,

On Tue, Jan 23, 2018 at 07:08:20PM +0200, Shahaf Shuler wrote:
> Secondary process is not allowed to register mempools on the flight.
> 
> The code will return invalid memory key for such case.
> 
> Fixes: 87ec44ce1651 ("net/mlx5: add operations for secondary process")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
> Signed-off-by: Xueming Li <xuemingl@mellanox.com>
> ---
>  doc/guides/nics/mlx5.rst     |  7 ++++++-
>  drivers/net/mlx5/mlx5_rxtx.h | 17 ++++++++++++++---
>  2 files changed, 20 insertions(+), 4 deletions(-)
> 
> diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
> index bdc2216c0..2f860402f 100644
> --- a/doc/guides/nics/mlx5.rst
> +++ b/doc/guides/nics/mlx5.rst
> @@ -106,7 +106,12 @@ Limitations
>  
>  - Inner RSS for VXLAN frames is not supported yet.
>  - Hardware checksum RX offloads for VXLAN inner header are not supported yet.
> -- Forked secondary process not supported.
> +- For secondary process:
> +
> +  - Forked secondary process not supported.
> +  - All mempools must be initialized before rte_eth_dev_start().
> +  - Number of mempools must less than CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE

Why such limitation?  Registering a new memory is independent of
searching a new one when the cache is too small.

>  - Flow pattern without any specific vlan will match for vlan packets as well:
>  
>    When VLAN spec is not specified in the pattern, the matching rule will be created with VLAN as a wild card.
> diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
> index a63364d79..79cdfc793 100644
> --- a/drivers/net/mlx5/mlx5_rxtx.h
> +++ b/drivers/net/mlx5/mlx5_rxtx.h
> @@ -550,6 +550,7 @@ mlx5_tx_mb2mr(struct mlx5_txq_data *txq, struct rte_mbuf *mb)
>  	uint16_t i = txq->mr_cache_idx;
>  	uintptr_t addr = rte_pktmbuf_mtod(mb, uintptr_t);
>  	struct mlx5_mr *mr;
> +	struct rte_mempool *mp;
>  
>  	assert(i < RTE_DIM(txq->mp2mr));
>  	if (likely(txq->mp2mr[i]->start <= addr && txq->mp2mr[i]->end >= addr))
> @@ -563,14 +564,24 @@ mlx5_tx_mb2mr(struct mlx5_txq_data *txq, struct rte_mbuf *mb)
>  		if (txq->mp2mr[i]->start <= addr &&
>  		    txq->mp2mr[i]->end >= addr) {
>  			assert(txq->mp2mr[i]->lkey != (uint32_t)-1);
> -			assert(rte_cpu_to_be_32(txq->mp2mr[i]->mr->lkey) ==
> -			       txq->mp2mr[i]->lkey);
> +			if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
> +				assert(rte_cpu_to_be_32(txq->mp2mr[i]->mr->lkey)
> +				       == txq->mp2mr[i]->lkey);
> +			}

This code should be inside priv_txq_mp2mr_reg() to let the secondary
search inside the MR list when the cache is too small.

If it does not find any MR it should fail before calling
priv_mr_new().

>  			txq->mr_cache_idx = i;
>  			return txq->mp2mr[i]->lkey;
>  		}
>  	}
>  	txq->mr_cache_idx = 0;
> -	mr = mlx5_txq_mp2mr_reg(txq, mlx5_tx_mb2mp(mb), i);
> +	mp = mlx5_tx_mb2mp(mb);
> +	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
> +		WARN("Using unregistered mempool 0x%p(%s) in secondary process,"
> +		     " please create mempool before rte_eth_dev_start()",
> +		     (void *)mp, mp->name);
> +		assert(rte_eal_process_type() == RTE_PROC_PRIMARY);
> +		return (uint32_t)-1;
> +	}
> +	mr = mlx5_txq_mp2mr_reg(txq, mp, i);
>  	/*
>  	 * Request the reference to use in this queue, the original one is
>  	 * kept by the control plane.
> -- 
> 2.12.0

-- 
Nélio Laranjeiro
6WIND

Re: [dpdk-stable] [PATCH 2/5] net/mlx5: fix secondary process mempool registration

[Shahaf Shuler]

Wednesday, January 24, 2018 10:14 AM, Nélio Laranjeiro:
> Hi Shahaf,
> 
> On Tue, Jan 23, 2018 at 07:08:20PM +0200, Shahaf Shuler wrote:
> > Secondary process is not allowed to register mempools on the flight.
> >
> > The code will return invalid memory key for such case.
> >
> > Fixes: 87ec44ce1651 ("net/mlx5: add operations for secondary process")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
> > Signed-off-by: Xueming Li <xuemingl@mellanox.com>
> > ---
> >  doc/guides/nics/mlx5.rst     |  7 ++++++-
> >  drivers/net/mlx5/mlx5_rxtx.h | 17 ++++++++++++++---
> >  2 files changed, 20 insertions(+), 4 deletions(-)
> >
> > diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index
> > bdc2216c0..2f860402f 100644
> > --- a/doc/guides/nics/mlx5.rst
> > +++ b/doc/guides/nics/mlx5.rst
> > @@ -106,7 +106,12 @@ Limitations
> >
> >  - Inner RSS for VXLAN frames is not supported yet.
> >  - Hardware checksum RX offloads for VXLAN inner header are not
> supported yet.
> > -- Forked secondary process not supported.
> > +- For secondary process:
> > +
> > +  - Forked secondary process not supported.
> > +  - All mempools must be initialized before rte_eth_dev_start().
> > +  - Number of mempools must less than
> > + CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE
> 
> Why such limitation?  Registering a new memory is independent of searching
> a new one when the cache is too small.
> 
> >  - Flow pattern without any specific vlan will match for vlan packets as well:
> >
> >    When VLAN spec is not specified in the pattern, the matching rule will be
> created with VLAN as a wild card.
> > diff --git a/drivers/net/mlx5/mlx5_rxtx.h
> > b/drivers/net/mlx5/mlx5_rxtx.h index a63364d79..79cdfc793 100644
> > --- a/drivers/net/mlx5/mlx5_rxtx.h
> > +++ b/drivers/net/mlx5/mlx5_rxtx.h
> > @@ -550,6 +550,7 @@ mlx5_tx_mb2mr(struct mlx5_txq_data *txq, struct
> rte_mbuf *mb)
> >  	uint16_t i = txq->mr_cache_idx;
> >  	uintptr_t addr = rte_pktmbuf_mtod(mb, uintptr_t);
> >  	struct mlx5_mr *mr;
> > +	struct rte_mempool *mp;
> >
> >  	assert(i < RTE_DIM(txq->mp2mr));
> >  	if (likely(txq->mp2mr[i]->start <= addr && txq->mp2mr[i]->end >=
> > addr)) @@ -563,14 +564,24 @@ mlx5_tx_mb2mr(struct mlx5_txq_data
> *txq, struct rte_mbuf *mb)
> >  		if (txq->mp2mr[i]->start <= addr &&
> >  		    txq->mp2mr[i]->end >= addr) {
> >  			assert(txq->mp2mr[i]->lkey != (uint32_t)-1);
> > -			assert(rte_cpu_to_be_32(txq->mp2mr[i]->mr->lkey)
> ==
> > -			       txq->mp2mr[i]->lkey);
> > +			if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
> > +				assert(rte_cpu_to_be_32(txq->mp2mr[i]-
> >mr->lkey)
> > +				       == txq->mp2mr[i]->lkey);
> > +			}
> 
> This code should be inside priv_txq_mp2mr_reg() to let the secondary
> search inside the MR list when the cache is too small.

You probably mean below code and not above. Yes good suggestion.
Regarding the above code - the assert in un-accessible from the secondary process as it tries to access ibv_mr.
I will add another patch to remove this assert completely (in order to save the comparison logic). 

> 
> If it does not find any MR it should fail before calling priv_mr_new().
> 
> >  			txq->mr_cache_idx = i;
> >  			return txq->mp2mr[i]->lkey;
> >  		}
> >  	}
> >  	txq->mr_cache_idx = 0;
> > -	mr = mlx5_txq_mp2mr_reg(txq, mlx5_tx_mb2mp(mb), i);
> > +	mp = mlx5_tx_mb2mp(mb);
> > +	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
> > +		WARN("Using unregistered mempool 0x%p(%s) in secondary
> process,"
> > +		     " please create mempool before rte_eth_dev_start()",
> > +		     (void *)mp, mp->name);
> > +		assert(rte_eal_process_type() == RTE_PROC_PRIMARY);
> > +		return (uint32_t)-1;
> > +	}
> > +	mr = mlx5_txq_mp2mr_reg(txq, mp, i);
> >  	/*
> >  	 * Request the reference to use in this queue, the original one is
> >  	 * kept by the control plane.
> > --
> > 2.12.0
> 
> --
> Nélio Laranjeiro
> 6WIND

[dpdk-stable] [PATCH 4/5] net/mlx5: fix memory registration cache last index

[Shahaf Shuler]

In case memory registration cache is full the new mempool will be
inserted in the last index of the array.

Update the last entry being hit to reflect it.

Fixes: 6cb559d67b83 ("net/mlx5: add vectorized Rx/Tx burst for x86")
Cc: stable@dpdk.org
Cc: yskoh@mellanox.com

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
---
 drivers/net/mlx5/mlx5_rxtx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index 2934f9fb3..4bedfb89b 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h
@@ -572,7 +572,6 @@ mlx5_tx_mb2mr(struct mlx5_txq_data *txq, struct rte_mbuf *mb)
 			return txq->mp2mr[i]->lkey;
 		}
 	}
-	txq->mr_cache_idx = 0;
 	mp = mlx5_tx_mb2mp(mb);
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
 		WARN("Using unregistered mempool 0x%p(%s) in secondary process,"
@@ -588,6 +587,7 @@ mlx5_tx_mb2mr(struct mlx5_txq_data *txq, struct rte_mbuf *mb)
 	 */
 	if (mr) {
 		rte_atomic32_inc(&mr->refcnt);
+		txq->mr_cache_idx = i >= RTE_DIM(txq->mp2mr) ? i - 1 : i;
 		return mr->lkey;
 	} else {
 		WARN("Failed to register mempool 0x%p(%s)",
-- 
2.12.0

[dpdk-stable] [PATCH v2 1/6] net/mlx5: fix Memory Region cache lookup

[Shahaf Shuler]

The Memory Region (MR) cache contains pointers to mlx5_mr.
The MR cache indexes are filled when a new MR is created. As it is
possible for MR to be created on the flight, an extra validation must be
added to avoid segmentation fault.

Fixes: b0b093845793 ("net/mlx5: use buffer address for LKEY search")
Cc: stable@dpdk.org

Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
---
 drivers/net/mlx5/mlx5_rxtx.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index 2eb2f0506..a63364d79 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h
@@ -555,7 +555,8 @@ mlx5_tx_mb2mr(struct mlx5_txq_data *txq, struct rte_mbuf *mb)
 	if (likely(txq->mp2mr[i]->start <= addr && txq->mp2mr[i]->end >= addr))
 		return txq->mp2mr[i]->lkey;
 	for (i = 0; (i != RTE_DIM(txq->mp2mr)); ++i) {
-		if (unlikely(txq->mp2mr[i]->mr == NULL)) {
+		if (unlikely(txq->mp2mr[i] == NULL ||
+		    txq->mp2mr[i]->mr == NULL)) {
 			/* Unknown MP, add a new MR for it. */
 			break;
 		}
-- 
2.12.0

[dpdk-stable] [PATCH v2 2/6] net/mlx5: fix secondary process mempool registration

[Shahaf Shuler]

Secondary process is not allowed to register mempools on the flight.

The code will return invalid memory key for such case.

Fixes: 87ec44ce1651 ("net/mlx5: add operations for secondary process")
Cc: stable@dpdk.org

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
---
 doc/guides/nics/mlx5.rst   |  6 +++++-
 drivers/net/mlx5/mlx5_mr.c | 12 ++++++++++--
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index bdc2216c0..2e6d1e45a 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -106,7 +106,11 @@ Limitations
 
 - Inner RSS for VXLAN frames is not supported yet.
 - Hardware checksum RX offloads for VXLAN inner header are not supported yet.
-- Forked secondary process not supported.
+- For secondary process:
+
+  - Forked secondary process not supported.
+  - All mempools must be initialized before rte_eth_dev_start().
+
 - Flow pattern without any specific vlan will match for vlan packets as well:
 
   When VLAN spec is not specified in the pattern, the matching rule will be created with VLAN as a wild card.
diff --git a/drivers/net/mlx5/mlx5_mr.c b/drivers/net/mlx5/mlx5_mr.c
index 2776dc700..cb625dc61 100644
--- a/drivers/net/mlx5/mlx5_mr.c
+++ b/drivers/net/mlx5/mlx5_mr.c
@@ -141,8 +141,16 @@ priv_txq_mp2mr_reg(struct priv *priv, struct mlx5_txq_data *txq,
 	DEBUG("%p: discovered new memory pool \"%s\" (%p)",
 	      (void *)txq_ctrl, mp->name, (void *)mp);
 	mr = priv_mr_get(priv, mp);
-	if (mr == NULL)
-		mr = priv_mr_new(priv, mp);
+	if (mr == NULL) {
+		if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+			DEBUG("Using unregistered mempool 0x%p(%s) in secondary process,"
+			     " please create mempool before rte_eth_dev_start()",
+			     (void *)mp, mp->name);
+			return NULL;
+		} else {
+			mr = priv_mr_new(priv, mp);
+		}
+	}
 	if (unlikely(mr == NULL)) {
 		DEBUG("%p: unable to configure MR, ibv_reg_mr() failed.",
 		      (void *)txq_ctrl);
-- 
2.12.0

[dpdk-stable] [PATCH v2 5/6] net/mlx5: fix Memory Region cache last index

[Shahaf Shuler]

In case Memory Region cache is full, the new mempool will be
inserted in the last index of the array.

Update the last entry being hit to reflect it.

Fixes: b0b093845793 ("net/mlx5: use buffer address for LKEY search")
Cc: stable@dpdk.org
Cc: yskoh@mellanox.com

Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
---
 drivers/net/mlx5/mlx5_rxtx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index e6d163a59..7e7db0e8c 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h
@@ -567,7 +567,6 @@ mlx5_tx_mb2mr(struct mlx5_txq_data *txq, struct rte_mbuf *mb)
 			return txq->mp2mr[i]->lkey;
 		}
 	}
-	txq->mr_cache_idx = 0;
 	mr = mlx5_txq_mp2mr_reg(txq, mlx5_tx_mb2mp(mb), i);
 	/*
 	 * Request the reference to use in this queue, the original one is
@@ -575,6 +574,7 @@ mlx5_tx_mb2mr(struct mlx5_txq_data *txq, struct rte_mbuf *mb)
 	 */
 	if (mr) {
 		rte_atomic32_inc(&mr->refcnt);
+		txq->mr_cache_idx = i >= RTE_DIM(txq->mp2mr) ? i - 1 : i;
 		return mr->lkey;
 	} else {
 		struct rte_mempool *mp = mlx5_tx_mb2mp(mb);
-- 
2.12.0