From: Ilya Maximets <i.maximets@samsung.com>
To: "Zhang, Qi Z" <qi.z.zhang@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Lu, Wenzhuo" <wenzhuo.lu@intel.com>,
"Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
Laurent Hardy <laurent.hardy@6wind.com>,
Wei Dai <wei.dai@intel.com>, "stable@dpdk.org" <stable@dpdk.org>,
Thomas Monjalon <thomas.monjalon@6wind.com>,
"Yigit, Ferruh" <ferruh.yigit@intel.com>
Subject: Re: [dpdk-stable] [PATCH] net/ixgbe: fix busy polling while fiber link update
Date: Thu, 1 Nov 2018 19:05:33 +0300 [thread overview]
Message-ID: <d28af060-605c-f88b-4dcb-3fcd2f8e9d4d@samsung.com> (raw)
In-Reply-To: <039ED4275CED7440929022BC67E70611532DE5F7@SHSMSX103.ccr.corp.intel.com>
On 01.11.2018 18:45, Zhang, Qi Z wrote:
>
>
>> -----Original Message-----
>> From: Ilya Maximets [mailto:i.maximets@samsung.com]
>> Sent: Tuesday, October 30, 2018 5:21 AM
>> To: dev@dpdk.org
>> Cc: Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin
>> <konstantin.ananyev@intel.com>; Laurent Hardy
>> <laurent.hardy@6wind.com>; Wei Dai <wei.dai@intel.com>;
>> stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Thomas Monjalon
>> <thomas.monjalon@6wind.com>; Yigit, Ferruh <ferruh.yigit@intel.com>
>> Subject: Re: [PATCH] net/ixgbe: fix busy polling while fiber link update
>>
>> Any more thoughts on that fix?
>> Or is there any chance for it to be accepted?
>
> Would you rebase to dpdk-next-net-intel?
Done.
> Thanks
> Qi
>
>>
>> Best regards, Ilya Maximets.
>>
>> On 31.08.2018 15:39, Ilya Maximets wrote:
>>> If the multispeed fiber link is in DOWN state, ixgbe_setup_link could
>>> take around a second of busy polling. This is highly inconvenient for
>>> the case where single thread periodically checks the link statuses.
>>> For example, OVS main thread periodically updates the link statuses
>>> and hangs for a really long time busy waiting on ixgbe_setup_link()
>>> for a DOWN fiber ports. For case with 3 down ports it hangs for a 3
>>> seconds and unable to do anything including packet processing.
>>> Fix that by shifting that workaround to a separate thread by alarm
>>> handler that will try to set up link if it is DOWN.
>>>
>>> Fixes: c12d22f65b13 ("net/ixgbe: ensure link status is updated")
>>> CC: stable@dpdk.org
>>>
>>> Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
>>> ---
>>> drivers/net/ixgbe/ixgbe_ethdev.c | 43
>>> ++++++++++++++++++++++++--------
>>> 1 file changed, 32 insertions(+), 11 deletions(-)
>>>
>>> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c
>>> b/drivers/net/ixgbe/ixgbe_ethdev.c
>>> index 26b192737..a33b9a6e8 100644
>>> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
>>> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
>>> @@ -221,6 +221,8 @@ static int ixgbe_dev_interrupt_action(struct
>> rte_eth_dev *dev,
>>> struct rte_intr_handle *handle); static void
>>> ixgbe_dev_interrupt_handler(void *param); static void
>>> ixgbe_dev_interrupt_delayed_handler(void *param);
>>> +static void ixgbe_dev_setup_link_alarm_handler(void *param);
>>> +
>>> static int ixgbe_add_rar(struct rte_eth_dev *dev, struct ether_addr
>> *mac_addr,
>>> uint32_t index, uint32_t pool);
>>> static void ixgbe_remove_rar(struct rte_eth_dev *dev, uint32_t
>>> index); @@ -2791,6 +2793,8 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
>>>
>>> PMD_INIT_FUNC_TRACE();
>>>
>>> + rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
>>> +
>>> /* disable interrupts */
>>> ixgbe_disable_intr(hw);
>>>
>>> @@ -3969,6 +3973,25 @@ ixgbevf_check_link(struct ixgbe_hw *hw,
>> ixgbe_link_speed *speed,
>>> return ret_val;
>>> }
>>>
>>> +static void
>>> +ixgbe_dev_setup_link_alarm_handler(void *param) {
>>> + struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
>>> + struct ixgbe_hw *hw =
>> IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>>> + struct ixgbe_interrupt *intr =
>>> + IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
>>> + u32 speed;
>>> + bool autoneg = false;
>>> +
>>> + speed = hw->phy.autoneg_advertised;
>>> + if (!speed)
>>> + ixgbe_get_link_capabilities(hw, &speed, &autoneg);
>>> +
>>> + ixgbe_setup_link(hw, speed, true);
>>> +
>>> + intr->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; }
>>> +
>>> /* return 0 means link status changed, -1 means not changed */ int
>>> ixgbe_dev_link_update_share(struct rte_eth_dev *dev, @@ -3981,9
>>> +4004,7 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
>>> IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
>>> int link_up;
>>> int diag;
>>> - u32 speed = 0;
>>> int wait = 1;
>>> - bool autoneg = false;
>>>
>>> memset(&link, 0, sizeof(link));
>>> link.link_status = ETH_LINK_DOWN;
>>> @@ -3993,13 +4014,8 @@ ixgbe_dev_link_update_share(struct
>> rte_eth_dev
>>> *dev,
>>>
>>> hw->mac.get_link_status = true;
>>>
>>> - if ((intr->flags & IXGBE_FLAG_NEED_LINK_CONFIG) &&
>>> - ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
>>> - speed = hw->phy.autoneg_advertised;
>>> - if (!speed)
>>> - ixgbe_get_link_capabilities(hw, &speed, &autoneg);
>>> - ixgbe_setup_link(hw, speed, true);
>>> - }
>>> + if (intr->flags & IXGBE_FLAG_NEED_LINK_CONFIG)
>>> + return rte_eth_linkstatus_set(dev, &link);
>>>
>>> /* check if it needs to wait to complete, if lsc interrupt is enabled */
>>> if (wait_to_complete == 0 || dev->data->dev_conf.intr_conf.lsc != 0)
>>> @@ -4017,11 +4033,14 @@ ixgbe_dev_link_update_share(struct
>> rte_eth_dev *dev,
>>> }
>>>
>>> if (link_up == 0) {
>>> - intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
>>> + if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
>>> + intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
>>> + rte_eal_alarm_set(10,
>>> + ixgbe_dev_setup_link_alarm_handler, dev);
>>> + }
>>> return rte_eth_linkstatus_set(dev, &link);
>>> }
>>>
>>> - intr->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
>>> link.link_status = ETH_LINK_UP;
>>> link.link_duplex = ETH_LINK_FULL_DUPLEX;
>>>
>>> @@ -5128,6 +5147,8 @@ ixgbevf_dev_stop(struct rte_eth_dev *dev)
>>>
>>> PMD_INIT_FUNC_TRACE();
>>>
>>> + rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
>>> +
>>> ixgbevf_intr_disable(dev);
>>>
>>> hw->adapter_stopped = 1;
>>>
next prev parent reply other threads:[~2018-11-01 16:05 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20180831123824eucas1p1cd2981c716c4764703e24c3eeb4d33c7@eucas1p1.samsung.com>
2018-08-31 12:39 ` Ilya Maximets
2018-09-04 6:08 ` [dpdk-stable] [dpdk-dev] " Zhang, Qi Z
2018-09-10 15:08 ` Ilya Maximets
2018-09-12 6:49 ` Zhang, Qi Z
2018-09-12 8:05 ` Ilya Maximets
2018-09-12 8:28 ` Zhang, Qi Z
2018-09-21 14:25 ` Zhang, Qi Z
2018-10-03 7:43 ` Ilya Maximets
2018-10-09 10:22 ` Zhao1, Wei
2018-10-11 9:56 ` Zhao1, Wei
2018-10-11 10:26 ` Ilya Maximets
2018-10-11 12:21 ` Laurent Hardy
2018-10-12 7:36 ` Zhao1, Wei
2018-10-15 10:43 ` Laurent Hardy
2018-10-16 8:29 ` Zhao1, Wei
2018-10-12 9:19 ` Zhao1, Wei
2018-10-12 10:14 ` Ilya Maximets
2018-10-15 3:03 ` Zhao1, Wei
2018-10-15 8:40 ` Ilya Maximets
2018-10-16 8:59 ` Zhao1, Wei
2018-10-30 10:20 ` [dpdk-stable] " Ilya Maximets
2018-11-01 15:45 ` Zhang, Qi Z
2018-11-01 16:05 ` Ilya Maximets [this message]
[not found] ` <CGME20181101160505eucas1p1fcf268f3febaa80dcbb3e573b2fc2c68@eucas1p1.samsung.com>
2018-11-01 16:04 ` [dpdk-stable] [PATCH v2] " Ilya Maximets
2018-11-02 13:49 ` Zhang, Qi Z
2018-11-07 15:52 ` [dpdk-stable] [dpdk-dev] " Burakov, Anatoly
2018-11-08 10:27 ` Ilya Maximets
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d28af060-605c-f88b-4dcb-3fcd2f8e9d4d@samsung.com \
--to=i.maximets@samsung.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=laurent.hardy@6wind.com \
--cc=qi.z.zhang@intel.com \
--cc=stable@dpdk.org \
--cc=thomas.monjalon@6wind.com \
--cc=wei.dai@intel.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).