* [dpdk-stable] [PATCH v4] net/virtio: fix rxq intr config fails using vfio-pci
[not found] <20171109031818.31040-1-zhiyong.yang@intel.com>
@ 2017-11-09 4:46 ` Zhiyong Yang
2017-11-09 6:51 ` Tan, Jianfeng
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Zhiyong Yang @ 2017-11-09 4:46 UTC (permalink / raw)
To: dev; +Cc: stable, jianfeng.tan, yliu, maxime.coquelin, Zhiyong Yang
When running l3fwd-power to test virtio rxq interrupt using vfio
pci noiommu mode, startup fails. In the function virtio_read_caps,
the code if (flags & PCI_MSIX_ENABLE) intends to double check
if vfio msix is enabled or not. However, it is not enable at that
time. So use_msix is assigned to "0", not "1", which causes the
failure of configuring rxq intr in l3fwd-power.
This patch adds the function "vtpci_msix_detect" to detect the status
of msix when interrupt changes happen.
In the meanwhile, virtio_intr_enable/disable are introduced to wrap
rte_intr_enable/disable to enhance the ability to detect msix.
use_msix can indicate three different msix status by:
VIRTIO_MSIX_NONE (0)
VIRTIO_MSIX_DISABLED (1)
VIRTIO_MSIX_ENABLED (2)
CC: stable@dpdk.org
CC: jianfeng.tan@intel.com
CC: yliu@fridaylinux.org
CC: maxime.coquelin@redhat.com
Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
---
Changes in v4:
Enhance the commit log description.
Changes in v3:
Simply the code according to jianfeng's comments.
Changes in v2:
Add the capability to detect msix if virtio intr changes.
drivers/net/virtio/virtio_ethdev.c | 46 ++++++++++++++++++++++++++++++------
drivers/net/virtio/virtio_pci.c | 48 ++++++++++++++++++++++++++++++++++++--
drivers/net/virtio/virtio_pci.h | 6 +++++
3 files changed, 91 insertions(+), 9 deletions(-)
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index d2576d5e0..87ac2bee6 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
static void virtio_mac_addr_set(struct rte_eth_dev *dev,
struct ether_addr *mac_addr);
+static int virtio_intr_enable(struct rte_eth_dev *dev);
+static int virtio_intr_disable(struct rte_eth_dev *dev);
+
static int virtio_dev_queue_stats_mapping_set(
struct rte_eth_dev *eth_dev,
uint16_t queue_id,
@@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
virtio_queues_unbind_intr(dev);
if (intr_conf->lsc || intr_conf->rxq) {
- rte_intr_disable(dev->intr_handle);
+ virtio_intr_disable(dev);
rte_intr_efd_disable(dev->intr_handle);
rte_free(dev->intr_handle->intr_vec);
dev->intr_handle->intr_vec = NULL;
@@ -1160,6 +1163,34 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
}
static int
+virtio_intr_enable(struct rte_eth_dev *dev)
+{
+ struct virtio_hw *hw = dev->data->dev_private;
+
+ if (rte_intr_enable(dev->intr_handle) < 0)
+ return -1;
+
+ if (!hw->virtio_user_dev)
+ hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+ return 0;
+}
+
+static int
+virtio_intr_disable(struct rte_eth_dev *dev)
+{
+ struct virtio_hw *hw = dev->data->dev_private;
+
+ if (rte_intr_disable(dev->intr_handle) < 0)
+ return -1;
+
+ if (!hw->virtio_user_dev)
+ hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+ return 0;
+}
+
+static int
virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
{
uint64_t host_features;
@@ -1228,7 +1259,7 @@ virtio_interrupt_handler(void *param)
isr = vtpci_isr(hw);
PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
- if (rte_intr_enable(dev->intr_handle) < 0)
+ if (virtio_intr_enable(dev) < 0)
PMD_DRV_LOG(ERR, "interrupt enable failed");
if (isr & VIRTIO_PCI_ISR_CONFIG) {
@@ -1348,7 +1379,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
* to change the config size from 20 to 24, or VIRTIO_MSI_QUEUE_VECTOR
* (22) will be ignored.
*/
- if (rte_intr_enable(dev->intr_handle) < 0) {
+ if (virtio_intr_enable(dev) < 0) {
PMD_DRV_LOG(ERR, "interrupt enable failed");
return -1;
}
@@ -1388,7 +1419,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
}
/* If host does not support both status and MSI-X then disable LSC */
- if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix)
+ if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
+ hw->use_msix != VIRTIO_MSIX_NONE)
eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
else
eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
@@ -1801,9 +1833,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
*/
if (dev->data->dev_conf.intr_conf.lsc ||
dev->data->dev_conf.intr_conf.rxq) {
- rte_intr_disable(dev->intr_handle);
+ virtio_intr_disable(dev);
- if (rte_intr_enable(dev->intr_handle) < 0) {
+ if (virtio_intr_enable(dev) < 0) {
PMD_DRV_LOG(ERR, "interrupt enable failed");
return -EIO;
}
@@ -1912,7 +1944,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
PMD_INIT_LOG(DEBUG, "stop");
if (intr_conf->lsc || intr_conf->rxq)
- rte_intr_disable(dev->intr_handle);
+ virtio_intr_disable(dev);
hw->started = 0;
memset(&link, 0, sizeof(link));
diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
index 55b717c03..10c45228c 100644
--- a/drivers/net/virtio/virtio_pci.c
+++ b/drivers/net/virtio/virtio_pci.c
@@ -57,7 +57,8 @@
* The remaining space is defined by each driver as the per-driver
* configuration space.
*/
-#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
+#define VIRTIO_PCI_CONFIG(hw) \
+ (((hw)->use_msix == VIRTIO_MSIX_ENABLED) ? 24 : 20)
static inline int
check_vq_phys_addr_ok(struct virtqueue *vq)
@@ -617,7 +618,9 @@ virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
uint16_t flags = ((uint16_t *)&cap)[1];
if (flags & PCI_MSIX_ENABLE)
- hw->use_msix = 1;
+ hw->use_msix = VIRTIO_MSIX_ENABLED;
+ else
+ hw->use_msix = VIRTIO_MSIX_DISABLED;
}
if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
@@ -710,3 +713,44 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
return 0;
}
+
+/* Return 0 (VIRTIO_MSIX_NONE)
+ * Return 1 (VIRTIO_MSIX_DISABLED)
+ * Return 2 (VIRTIO_MSIX_ENABLED)
+ */
+
+uint8_t
+vtpci_msix_detect(struct rte_pci_device *dev)
+{
+ uint8_t pos;
+ struct virtio_pci_cap cap;
+ int ret;
+
+ ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
+ if (ret < 0) {
+ PMD_INIT_LOG(DEBUG, "failed to read pci capability list");
+ return VIRTIO_MSIX_NONE;
+ }
+
+ while (pos) {
+ ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
+ if (ret < 0) {
+ PMD_INIT_LOG(ERR,
+ "failed to read pci cap at pos: %x", pos);
+ break;
+ }
+
+ if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
+ uint16_t flags = ((uint16_t *)&cap)[1];
+
+ if (flags & PCI_MSIX_ENABLE)
+ return VIRTIO_MSIX_ENABLED;
+ else
+ return VIRTIO_MSIX_DISABLED;
+ }
+
+ pos = cap.cap_next;
+ }
+
+ return VIRTIO_MSIX_NONE;
+}
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index 36d452c06..600e106eb 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -314,6 +314,10 @@ struct virtio_net_config {
/* The alignment to use between consumer and producer parts of vring. */
#define VIRTIO_PCI_VRING_ALIGN 4096
+#define VIRTIO_MSIX_NONE 0
+#define VIRTIO_MSIX_DISABLED 1
+#define VIRTIO_MSIX_ENABLED 2
+
static inline int
vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
{
@@ -339,6 +343,8 @@ void vtpci_read_dev_config(struct virtio_hw *, size_t, void *, int);
uint8_t vtpci_isr(struct virtio_hw *);
+uint8_t vtpci_msix_detect(struct rte_pci_device *dev);
+
extern const struct virtio_pci_ops legacy_ops;
extern const struct virtio_pci_ops modern_ops;
extern const struct virtio_pci_ops virtio_user_ops;
--
2.13.3
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-stable] [PATCH v4] net/virtio: fix rxq intr config fails using vfio-pci
2017-11-09 4:46 ` [dpdk-stable] [PATCH v4] net/virtio: fix rxq intr config fails using vfio-pci Zhiyong Yang
@ 2017-11-09 6:51 ` Tan, Jianfeng
2017-11-09 8:18 ` Maxime Coquelin
2017-11-09 8:55 ` [dpdk-stable] [PATCH v5] " Zhiyong Yang
2 siblings, 0 replies; 8+ messages in thread
From: Tan, Jianfeng @ 2017-11-09 6:51 UTC (permalink / raw)
To: Yang, Zhiyong, dev; +Cc: stable, yliu, maxime.coquelin
> -----Original Message-----
> From: Yang, Zhiyong
> Sent: Thursday, November 9, 2017 12:46 PM
> To: dev@dpdk.org
> Cc: stable@dpdk.org; Tan, Jianfeng; yliu@fridaylinux.org;
> maxime.coquelin@redhat.com; Yang, Zhiyong
> Subject: [PATCH v4] net/virtio: fix rxq intr config fails using vfio-pci
>
> When running l3fwd-power to test virtio rxq interrupt using vfio
> pci noiommu mode, startup fails. In the function virtio_read_caps,
> the code if (flags & PCI_MSIX_ENABLE) intends to double check
> if vfio msix is enabled or not. However, it is not enable at that
> time. So use_msix is assigned to "0", not "1", which causes the
> failure of configuring rxq intr in l3fwd-power.
> This patch adds the function "vtpci_msix_detect" to detect the status
> of msix when interrupt changes happen.
> In the meanwhile, virtio_intr_enable/disable are introduced to wrap
> rte_intr_enable/disable to enhance the ability to detect msix.
> use_msix can indicate three different msix status by:
> VIRTIO_MSIX_NONE (0)
> VIRTIO_MSIX_DISABLED (1)
> VIRTIO_MSIX_ENABLED (2)
>
> CC: stable@dpdk.org
> CC: jianfeng.tan@intel.com
> CC: yliu@fridaylinux.org
> CC: maxime.coquelin@redhat.com
>
> Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
> Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Except a small nit, looks good to me:
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
> ---
>
> Changes in v4:
> Enhance the commit log description.
>
> Changes in v3:
> Simply the code according to jianfeng's comments.
>
> Changes in v2:
> Add the capability to detect msix if virtio intr changes.
>
> drivers/net/virtio/virtio_ethdev.c | 46
> ++++++++++++++++++++++++++++++------
> drivers/net/virtio/virtio_pci.c | 48
> ++++++++++++++++++++++++++++++++++++--
> drivers/net/virtio/virtio_pci.h | 6 +++++
> 3 files changed, 91 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/net/virtio/virtio_ethdev.c
> b/drivers/net/virtio/virtio_ethdev.c
> index d2576d5e0..87ac2bee6 100644
> --- a/drivers/net/virtio/virtio_ethdev.c
> +++ b/drivers/net/virtio/virtio_ethdev.c
> @@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev
> *dev, uint32_t index);
> static void virtio_mac_addr_set(struct rte_eth_dev *dev,
> struct ether_addr *mac_addr);
>
> +static int virtio_intr_enable(struct rte_eth_dev *dev);
> +static int virtio_intr_disable(struct rte_eth_dev *dev);
> +
> static int virtio_dev_queue_stats_mapping_set(
> struct rte_eth_dev *eth_dev,
> uint16_t queue_id,
> @@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
> virtio_queues_unbind_intr(dev);
>
> if (intr_conf->lsc || intr_conf->rxq) {
> - rte_intr_disable(dev->intr_handle);
> + virtio_intr_disable(dev);
> rte_intr_efd_disable(dev->intr_handle);
> rte_free(dev->intr_handle->intr_vec);
> dev->intr_handle->intr_vec = NULL;
> @@ -1160,6 +1163,34 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev,
> uint16_t vlan_id, int on)
> }
>
> static int
> +virtio_intr_enable(struct rte_eth_dev *dev)
> +{
> + struct virtio_hw *hw = dev->data->dev_private;
> +
> + if (rte_intr_enable(dev->intr_handle) < 0)
> + return -1;
> +
> + if (!hw->virtio_user_dev)
> + hw->use_msix =
> vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
> +
> + return 0;
> +}
> +
> +static int
> +virtio_intr_disable(struct rte_eth_dev *dev)
> +{
> + struct virtio_hw *hw = dev->data->dev_private;
> +
> + if (rte_intr_disable(dev->intr_handle) < 0)
> + return -1;
> +
> + if (!hw->virtio_user_dev)
> + hw->use_msix =
> vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
> +
> + return 0;
> +}
> +
> +static int
> virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
> {
> uint64_t host_features;
> @@ -1228,7 +1259,7 @@ virtio_interrupt_handler(void *param)
> isr = vtpci_isr(hw);
> PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
>
> - if (rte_intr_enable(dev->intr_handle) < 0)
> + if (virtio_intr_enable(dev) < 0)
> PMD_DRV_LOG(ERR, "interrupt enable failed");
>
> if (isr & VIRTIO_PCI_ISR_CONFIG) {
> @@ -1348,7 +1379,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
> * to change the config size from 20 to 24, or
> VIRTIO_MSI_QUEUE_VECTOR
> * (22) will be ignored.
> */
> - if (rte_intr_enable(dev->intr_handle) < 0) {
> + if (virtio_intr_enable(dev) < 0) {
> PMD_DRV_LOG(ERR, "interrupt enable failed");
> return -1;
> }
> @@ -1388,7 +1419,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev,
> uint64_t req_features)
> }
>
> /* If host does not support both status and MSI-X then disable LSC */
> - if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw-
> >use_msix)
> + if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
> + hw->use_msix != VIRTIO_MSIX_NONE)
> eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
> else
> eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
> @@ -1801,9 +1833,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
> */
> if (dev->data->dev_conf.intr_conf.lsc ||
> dev->data->dev_conf.intr_conf.rxq) {
> - rte_intr_disable(dev->intr_handle);
> + virtio_intr_disable(dev);
>
> - if (rte_intr_enable(dev->intr_handle) < 0) {
> + if (virtio_intr_enable(dev) < 0) {
> PMD_DRV_LOG(ERR, "interrupt enable failed");
> return -EIO;
> }
> @@ -1912,7 +1944,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
> PMD_INIT_LOG(DEBUG, "stop");
>
> if (intr_conf->lsc || intr_conf->rxq)
> - rte_intr_disable(dev->intr_handle);
> + virtio_intr_disable(dev);
>
> hw->started = 0;
> memset(&link, 0, sizeof(link));
> diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
> index 55b717c03..10c45228c 100644
> --- a/drivers/net/virtio/virtio_pci.c
> +++ b/drivers/net/virtio/virtio_pci.c
> @@ -57,7 +57,8 @@
> * The remaining space is defined by each driver as the per-driver
> * configuration space.
> */
> -#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
> +#define VIRTIO_PCI_CONFIG(hw) \
> + (((hw)->use_msix == VIRTIO_MSIX_ENABLED) ? 24 : 20)
>
> static inline int
> check_vq_phys_addr_ok(struct virtqueue *vq)
> @@ -617,7 +618,9 @@ virtio_read_caps(struct rte_pci_device *dev, struct
> virtio_hw *hw)
> uint16_t flags = ((uint16_t *)&cap)[1];
>
> if (flags & PCI_MSIX_ENABLE)
> - hw->use_msix = 1;
> + hw->use_msix = VIRTIO_MSIX_ENABLED;
> + else
> + hw->use_msix = VIRTIO_MSIX_DISABLED;
> }
>
> if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
> @@ -710,3 +713,44 @@ vtpci_init(struct rte_pci_device *dev, struct
> virtio_hw *hw)
>
> return 0;
> }
> +
> +/* Return 0 (VIRTIO_MSIX_NONE)
> + * Return 1 (VIRTIO_MSIX_DISABLED)
> + * Return 2 (VIRTIO_MSIX_ENABLED)
> + */
Above comments seems not necessary as it just repeat it's just the macro's definition.
Thanks,
Jianfeng
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-stable] [PATCH v4] net/virtio: fix rxq intr config fails using vfio-pci
2017-11-09 4:46 ` [dpdk-stable] [PATCH v4] net/virtio: fix rxq intr config fails using vfio-pci Zhiyong Yang
2017-11-09 6:51 ` Tan, Jianfeng
@ 2017-11-09 8:18 ` Maxime Coquelin
2017-11-09 8:55 ` [dpdk-stable] [PATCH v5] " Zhiyong Yang
2 siblings, 0 replies; 8+ messages in thread
From: Maxime Coquelin @ 2017-11-09 8:18 UTC (permalink / raw)
To: Zhiyong Yang, dev; +Cc: stable, jianfeng.tan, yliu
On 11/09/2017 05:46 AM, Zhiyong Yang wrote:
> When running l3fwd-power to test virtio rxq interrupt using vfio
> pci noiommu mode, startup fails. In the function virtio_read_caps,
> the code if (flags & PCI_MSIX_ENABLE) intends to double check
> if vfio msix is enabled or not. However, it is not enable at that
> time. So use_msix is assigned to "0", not "1", which causes the
> failure of configuring rxq intr in l3fwd-power.
> This patch adds the function "vtpci_msix_detect" to detect the status
> of msix when interrupt changes happen.
> In the meanwhile, virtio_intr_enable/disable are introduced to wrap
> rte_intr_enable/disable to enhance the ability to detect msix.
> use_msix can indicate three different msix status by:
> VIRTIO_MSIX_NONE (0)
> VIRTIO_MSIX_DISABLED (1)
> VIRTIO_MSIX_ENABLED (2)
>
> CC: stable@dpdk.org
> CC: jianfeng.tan@intel.com
> CC: yliu@fridaylinux.org
> CC: maxime.coquelin@redhat.com
>
> Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
> Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
> ---
>
> Changes in v4:
> Enhance the commit log description.
>
> Changes in v3:
> Simply the code according to jianfeng's comments.
>
> Changes in v2:
> Add the capability to detect msix if virtio intr changes.
>
> drivers/net/virtio/virtio_ethdev.c | 46 ++++++++++++++++++++++++++++++------
> drivers/net/virtio/virtio_pci.c | 48 ++++++++++++++++++++++++++++++++++++--
> drivers/net/virtio/virtio_pci.h | 6 +++++
> 3 files changed, 91 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
> index d2576d5e0..87ac2bee6 100644
> --- a/drivers/net/virtio/virtio_ethdev.c
> +++ b/drivers/net/virtio/virtio_ethdev.c
> @@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
> static void virtio_mac_addr_set(struct rte_eth_dev *dev,
> struct ether_addr *mac_addr);
>
> +static int virtio_intr_enable(struct rte_eth_dev *dev);
> +static int virtio_intr_disable(struct rte_eth_dev *dev);
> +
> static int virtio_dev_queue_stats_mapping_set(
> struct rte_eth_dev *eth_dev,
> uint16_t queue_id,
> @@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
> virtio_queues_unbind_intr(dev);
>
> if (intr_conf->lsc || intr_conf->rxq) {
> - rte_intr_disable(dev->intr_handle);
> + virtio_intr_disable(dev);
> rte_intr_efd_disable(dev->intr_handle);
> rte_free(dev->intr_handle->intr_vec);
> dev->intr_handle->intr_vec = NULL;
> @@ -1160,6 +1163,34 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
> }
>
> static int
> +virtio_intr_enable(struct rte_eth_dev *dev)
> +{
> + struct virtio_hw *hw = dev->data->dev_private;
> +
> + if (rte_intr_enable(dev->intr_handle) < 0)
> + return -1;
> +
> + if (!hw->virtio_user_dev)
> + hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
> +
> + return 0;
> +}
> +
> +static int
> +virtio_intr_disable(struct rte_eth_dev *dev)
> +{
> + struct virtio_hw *hw = dev->data->dev_private;
> +
> + if (rte_intr_disable(dev->intr_handle) < 0)
> + return -1;
> +
> + if (!hw->virtio_user_dev)
> + hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
> +
> + return 0;
> +}
> +
> +static int
> virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
> {
> uint64_t host_features;
> @@ -1228,7 +1259,7 @@ virtio_interrupt_handler(void *param)
> isr = vtpci_isr(hw);
> PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
>
> - if (rte_intr_enable(dev->intr_handle) < 0)
> + if (virtio_intr_enable(dev) < 0)
> PMD_DRV_LOG(ERR, "interrupt enable failed");
>
> if (isr & VIRTIO_PCI_ISR_CONFIG) {
> @@ -1348,7 +1379,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
> * to change the config size from 20 to 24, or VIRTIO_MSI_QUEUE_VECTOR
> * (22) will be ignored.
> */
> - if (rte_intr_enable(dev->intr_handle) < 0) {
> + if (virtio_intr_enable(dev) < 0) {
> PMD_DRV_LOG(ERR, "interrupt enable failed");
> return -1;
> }
> @@ -1388,7 +1419,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
> }
>
> /* If host does not support both status and MSI-X then disable LSC */
> - if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix)
> + if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
> + hw->use_msix != VIRTIO_MSIX_NONE)
> eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
> else
> eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
> @@ -1801,9 +1833,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
> */
> if (dev->data->dev_conf.intr_conf.lsc ||
> dev->data->dev_conf.intr_conf.rxq) {
> - rte_intr_disable(dev->intr_handle);
> + virtio_intr_disable(dev);
>
> - if (rte_intr_enable(dev->intr_handle) < 0) {
> + if (virtio_intr_enable(dev) < 0) {
> PMD_DRV_LOG(ERR, "interrupt enable failed");
> return -EIO;
> }
> @@ -1912,7 +1944,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
> PMD_INIT_LOG(DEBUG, "stop");
>
> if (intr_conf->lsc || intr_conf->rxq)
> - rte_intr_disable(dev->intr_handle);
> + virtio_intr_disable(dev);
>
> hw->started = 0;
> memset(&link, 0, sizeof(link));
> diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
> index 55b717c03..10c45228c 100644
> --- a/drivers/net/virtio/virtio_pci.c
> +++ b/drivers/net/virtio/virtio_pci.c
> @@ -57,7 +57,8 @@
> * The remaining space is defined by each driver as the per-driver
> * configuration space.
> */
> -#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
> +#define VIRTIO_PCI_CONFIG(hw) \
> + (((hw)->use_msix == VIRTIO_MSIX_ENABLED) ? 24 : 20)
>
> static inline int
> check_vq_phys_addr_ok(struct virtqueue *vq)
> @@ -617,7 +618,9 @@ virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
> uint16_t flags = ((uint16_t *)&cap)[1];
>
> if (flags & PCI_MSIX_ENABLE)
> - hw->use_msix = 1;
> + hw->use_msix = VIRTIO_MSIX_ENABLED;
> + else
> + hw->use_msix = VIRTIO_MSIX_DISABLED;
> }
>
> if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
> @@ -710,3 +713,44 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
>
> return 0;
> }
> +
> +/* Return 0 (VIRTIO_MSIX_NONE)
> + * Return 1 (VIRTIO_MSIX_DISABLED)
> + * Return 2 (VIRTIO_MSIX_ENABLED)
> + */
> +
> +uint8_t
> +vtpci_msix_detect(struct rte_pci_device *dev)
> +{
> + uint8_t pos;
> + struct virtio_pci_cap cap;
> + int ret;
> +
> + ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
> + if (ret < 0) {
> + PMD_INIT_LOG(DEBUG, "failed to read pci capability list");
> + return VIRTIO_MSIX_NONE;
> + }
> +
> + while (pos) {
> + ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
> + if (ret < 0) {
> + PMD_INIT_LOG(ERR,
> + "failed to read pci cap at pos: %x", pos);
> + break;
> + }
> +
> + if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
> + uint16_t flags = ((uint16_t *)&cap)[1];
> +
> + if (flags & PCI_MSIX_ENABLE)
> + return VIRTIO_MSIX_ENABLED;
> + else
> + return VIRTIO_MSIX_DISABLED;
> + }
> +
> + pos = cap.cap_next;
> + }
> +
> + return VIRTIO_MSIX_NONE;
> +}
> diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
> index 36d452c06..600e106eb 100644
> --- a/drivers/net/virtio/virtio_pci.h
> +++ b/drivers/net/virtio/virtio_pci.h
> @@ -314,6 +314,10 @@ struct virtio_net_config {
> /* The alignment to use between consumer and producer parts of vring. */
> #define VIRTIO_PCI_VRING_ALIGN 4096
>
> +#define VIRTIO_MSIX_NONE 0
> +#define VIRTIO_MSIX_DISABLED 1
> +#define VIRTIO_MSIX_ENABLED 2
Maybe it could be cleaner to change the defines into an enum.
> +
> static inline int
> vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
> {
> @@ -339,6 +343,8 @@ void vtpci_read_dev_config(struct virtio_hw *, size_t, void *, int);
>
> uint8_t vtpci_isr(struct virtio_hw *);
>
> +uint8_t vtpci_msix_detect(struct rte_pci_device *dev);
So here, the function would return an enum.
Otherwise, the patch looks good to me. If you do the proposed change,
feel free to add my:
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Thanks,
Maxime
^ permalink raw reply [flat|nested] 8+ messages in thread
* [dpdk-stable] [PATCH v5] net/virtio: fix rxq intr config fails using vfio-pci
2017-11-09 4:46 ` [dpdk-stable] [PATCH v4] net/virtio: fix rxq intr config fails using vfio-pci Zhiyong Yang
2017-11-09 6:51 ` Tan, Jianfeng
2017-11-09 8:18 ` Maxime Coquelin
@ 2017-11-09 8:55 ` Zhiyong Yang
2017-11-09 9:08 ` Maxime Coquelin
2017-11-09 9:21 ` [dpdk-stable] [PATCH v6] " Zhiyong Yang
2 siblings, 2 replies; 8+ messages in thread
From: Zhiyong Yang @ 2017-11-09 8:55 UTC (permalink / raw)
To: dev; +Cc: stable, jianfeng.tan, yliu, maxime.coquelin, Zhiyong Yang
When running l3fwd-power to test virtio rxq interrupt using vfio
pci noiommu mode, startup fails. In the function virtio_read_caps,
the code if (flags & PCI_MSIX_ENABLE) intends to double check
if vfio msix is enabled or not. However, it is not enable at that
time. So use_msix is assigned to "0", not "1", which causes the
failure of configuring rxq intr in l3fwd-power.
This patch adds the function "vtpci_msix_detect" to detect the status
of msix when interrupt changes happen.
In the meanwhile, virtio_intr_enable/disable are introduced to wrap
rte_intr_enable/disable to enhance the ability to detect msix.
use_msix can indicate three different msix status by:
VIRTIO_MSIX_NONE (0)
VIRTIO_MSIX_DISABLED (1)
VIRTIO_MSIX_ENABLED (2)
CC: stable@dpdk.org
CC: jianfeng.tan@intel.com
CC: yliu@fridaylinux.org
CC: maxime.coquelin@redhat.com
Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---
Changes in v5:
1. Introduce new enum data type "VIRTIO_MSIX_STATUS" instead of macros.
2. Remove the unnecessary comments.
Changes in v4:
Enhance the commit log description.
Changes in v3:
Simply the code according to jianfeng's comments.
Changes in v2:
Add the capability to detect msix if virtio intr changes.
drivers/net/virtio/virtio_ethdev.c | 46 ++++++++++++++++++++++++++++++++------
drivers/net/virtio/virtio_pci.c | 43 +++++++++++++++++++++++++++++++++--
drivers/net/virtio/virtio_pci.h | 8 +++++++
3 files changed, 88 insertions(+), 9 deletions(-)
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index d2576d5e0..87ac2bee6 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
static void virtio_mac_addr_set(struct rte_eth_dev *dev,
struct ether_addr *mac_addr);
+static int virtio_intr_enable(struct rte_eth_dev *dev);
+static int virtio_intr_disable(struct rte_eth_dev *dev);
+
static int virtio_dev_queue_stats_mapping_set(
struct rte_eth_dev *eth_dev,
uint16_t queue_id,
@@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
virtio_queues_unbind_intr(dev);
if (intr_conf->lsc || intr_conf->rxq) {
- rte_intr_disable(dev->intr_handle);
+ virtio_intr_disable(dev);
rte_intr_efd_disable(dev->intr_handle);
rte_free(dev->intr_handle->intr_vec);
dev->intr_handle->intr_vec = NULL;
@@ -1160,6 +1163,34 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
}
static int
+virtio_intr_enable(struct rte_eth_dev *dev)
+{
+ struct virtio_hw *hw = dev->data->dev_private;
+
+ if (rte_intr_enable(dev->intr_handle) < 0)
+ return -1;
+
+ if (!hw->virtio_user_dev)
+ hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+ return 0;
+}
+
+static int
+virtio_intr_disable(struct rte_eth_dev *dev)
+{
+ struct virtio_hw *hw = dev->data->dev_private;
+
+ if (rte_intr_disable(dev->intr_handle) < 0)
+ return -1;
+
+ if (!hw->virtio_user_dev)
+ hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+ return 0;
+}
+
+static int
virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
{
uint64_t host_features;
@@ -1228,7 +1259,7 @@ virtio_interrupt_handler(void *param)
isr = vtpci_isr(hw);
PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
- if (rte_intr_enable(dev->intr_handle) < 0)
+ if (virtio_intr_enable(dev) < 0)
PMD_DRV_LOG(ERR, "interrupt enable failed");
if (isr & VIRTIO_PCI_ISR_CONFIG) {
@@ -1348,7 +1379,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
* to change the config size from 20 to 24, or VIRTIO_MSI_QUEUE_VECTOR
* (22) will be ignored.
*/
- if (rte_intr_enable(dev->intr_handle) < 0) {
+ if (virtio_intr_enable(dev) < 0) {
PMD_DRV_LOG(ERR, "interrupt enable failed");
return -1;
}
@@ -1388,7 +1419,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
}
/* If host does not support both status and MSI-X then disable LSC */
- if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix)
+ if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
+ hw->use_msix != VIRTIO_MSIX_NONE)
eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
else
eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
@@ -1801,9 +1833,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
*/
if (dev->data->dev_conf.intr_conf.lsc ||
dev->data->dev_conf.intr_conf.rxq) {
- rte_intr_disable(dev->intr_handle);
+ virtio_intr_disable(dev);
- if (rte_intr_enable(dev->intr_handle) < 0) {
+ if (virtio_intr_enable(dev) < 0) {
PMD_DRV_LOG(ERR, "interrupt enable failed");
return -EIO;
}
@@ -1912,7 +1944,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
PMD_INIT_LOG(DEBUG, "stop");
if (intr_conf->lsc || intr_conf->rxq)
- rte_intr_disable(dev->intr_handle);
+ virtio_intr_disable(dev);
hw->started = 0;
memset(&link, 0, sizeof(link));
diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
index 55b717c03..d6016de22 100644
--- a/drivers/net/virtio/virtio_pci.c
+++ b/drivers/net/virtio/virtio_pci.c
@@ -57,7 +57,8 @@
* The remaining space is defined by each driver as the per-driver
* configuration space.
*/
-#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
+#define VIRTIO_PCI_CONFIG(hw) \
+ (((hw)->use_msix == VIRTIO_MSIX_ENABLED) ? 24 : 20)
static inline int
check_vq_phys_addr_ok(struct virtqueue *vq)
@@ -617,7 +618,9 @@ virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
uint16_t flags = ((uint16_t *)&cap)[1];
if (flags & PCI_MSIX_ENABLE)
- hw->use_msix = 1;
+ hw->use_msix = VIRTIO_MSIX_ENABLED;
+ else
+ hw->use_msix = VIRTIO_MSIX_DISABLED;
}
if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
@@ -710,3 +713,39 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
return 0;
}
+
+enum VIRTIO_MSIX_STATUS
+vtpci_msix_detect(struct rte_pci_device *dev)
+{
+ uint8_t pos;
+ struct virtio_pci_cap cap;
+ int ret;
+
+ ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
+ if (ret < 0) {
+ PMD_INIT_LOG(DEBUG, "failed to read pci capability list");
+ return VIRTIO_MSIX_NONE;
+ }
+
+ while (pos) {
+ ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
+ if (ret < 0) {
+ PMD_INIT_LOG(ERR,
+ "failed to read pci cap at pos: %x", pos);
+ break;
+ }
+
+ if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
+ uint16_t flags = ((uint16_t *)&cap)[1];
+
+ if (flags & PCI_MSIX_ENABLE)
+ return VIRTIO_MSIX_ENABLED;
+ else
+ return VIRTIO_MSIX_DISABLED;
+ }
+
+ pos = cap.cap_next;
+ }
+
+ return VIRTIO_MSIX_NONE;
+}
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index 36d452c06..28e9af6c7 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -314,6 +314,12 @@ struct virtio_net_config {
/* The alignment to use between consumer and producer parts of vring. */
#define VIRTIO_PCI_VRING_ALIGN 4096
+enum VIRTIO_MSIX_STATUS {
+ VIRTIO_MSIX_NONE = 0,
+ VIRTIO_MSIX_DISABLED = 1,
+ VIRTIO_MSIX_ENABLED = 2
+};
+
static inline int
vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
{
@@ -339,6 +345,8 @@ void vtpci_read_dev_config(struct virtio_hw *, size_t, void *, int);
uint8_t vtpci_isr(struct virtio_hw *);
+enum VIRTIO_MSIX_STATUS vtpci_msix_detect(struct rte_pci_device *dev);
+
extern const struct virtio_pci_ops legacy_ops;
extern const struct virtio_pci_ops modern_ops;
extern const struct virtio_pci_ops virtio_user_ops;
--
2.13.3
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-stable] [PATCH v5] net/virtio: fix rxq intr config fails using vfio-pci
2017-11-09 8:55 ` [dpdk-stable] [PATCH v5] " Zhiyong Yang
@ 2017-11-09 9:08 ` Maxime Coquelin
2017-11-09 9:16 ` Yang, Zhiyong
2017-11-09 9:21 ` [dpdk-stable] [PATCH v6] " Zhiyong Yang
1 sibling, 1 reply; 8+ messages in thread
From: Maxime Coquelin @ 2017-11-09 9:08 UTC (permalink / raw)
To: Zhiyong Yang, dev; +Cc: stable, jianfeng.tan, yliu
On 11/09/2017 09:55 AM, Zhiyong Yang wrote:
> diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
> index 36d452c06..28e9af6c7 100644
> --- a/drivers/net/virtio/virtio_pci.h
> +++ b/drivers/net/virtio/virtio_pci.h
> @@ -314,6 +314,12 @@ struct virtio_net_config {
> /* The alignment to use between consumer and producer parts of vring. */
> #define VIRTIO_PCI_VRING_ALIGN 4096
>
> +enum VIRTIO_MSIX_STATUS {
Please change VIRTIO_MSIX_STATUS to lowercase.
Other than that, this is what I had in mind.
Thanks!
Maxime
> + VIRTIO_MSIX_NONE = 0,
> + VIRTIO_MSIX_DISABLED = 1,
> + VIRTIO_MSIX_ENABLED = 2
> +};
> +
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-stable] [PATCH v5] net/virtio: fix rxq intr config fails using vfio-pci
2017-11-09 9:08 ` Maxime Coquelin
@ 2017-11-09 9:16 ` Yang, Zhiyong
0 siblings, 0 replies; 8+ messages in thread
From: Yang, Zhiyong @ 2017-11-09 9:16 UTC (permalink / raw)
To: Maxime Coquelin, dev; +Cc: stable, Tan, Jianfeng, yliu
> -----Original Message-----
> From: Maxime Coquelin [mailto:maxime.coquelin@redhat.com]
> Sent: Thursday, November 9, 2017 5:09 PM
> To: Yang, Zhiyong <zhiyong.yang@intel.com>; dev@dpdk.org
> Cc: stable@dpdk.org; Tan, Jianfeng <jianfeng.tan@intel.com>;
> yliu@fridaylinux.org
> Subject: Re: [PATCH v5] net/virtio: fix rxq intr config fails using vfio-pci
>
>
>
> On 11/09/2017 09:55 AM, Zhiyong Yang wrote:
> > diff --git a/drivers/net/virtio/virtio_pci.h
> > b/drivers/net/virtio/virtio_pci.h index 36d452c06..28e9af6c7 100644
> > --- a/drivers/net/virtio/virtio_pci.h
> > +++ b/drivers/net/virtio/virtio_pci.h
> > @@ -314,6 +314,12 @@ struct virtio_net_config {
> > /* The alignment to use between consumer and producer parts of vring. */
> > #define VIRTIO_PCI_VRING_ALIGN 4096
> >
> > +enum VIRTIO_MSIX_STATUS {
> Please change VIRTIO_MSIX_STATUS to lowercase.
> Other than that, this is what I had in mind.
>
Thanks for your reminder. My negligence and not notice it.
Thanks
Zhiyong
^ permalink raw reply [flat|nested] 8+ messages in thread
* [dpdk-stable] [PATCH v6] net/virtio: fix rxq intr config fails using vfio-pci
2017-11-09 8:55 ` [dpdk-stable] [PATCH v5] " Zhiyong Yang
2017-11-09 9:08 ` Maxime Coquelin
@ 2017-11-09 9:21 ` Zhiyong Yang
2017-11-11 14:34 ` [dpdk-stable] [dpdk-dev] " Thomas Monjalon
1 sibling, 1 reply; 8+ messages in thread
From: Zhiyong Yang @ 2017-11-09 9:21 UTC (permalink / raw)
To: dev; +Cc: stable, jianfeng.tan, yliu, maxime.coquelin, Zhiyong Yang
When running l3fwd-power to test virtio rxq interrupt using vfio
pci noiommu mode, startup fails. In the function virtio_read_caps,
the code if (flags & PCI_MSIX_ENABLE) intends to double check
if vfio msix is enabled or not. However, it is not enable at that
time. So use_msix is assigned to "0", not "1", which causes the
failure of configuring rxq intr in l3fwd-power.
This patch adds the function "vtpci_msix_detect" to detect the status
of msix when interrupt changes happen.
In the meanwhile, virtio_intr_enable/disable are introduced to wrap
rte_intr_enable/disable to enhance the ability to detect msix.
use_msix can indicate three different msix status by:
VIRTIO_MSIX_NONE (0)
VIRTIO_MSIX_DISABLED (1)
VIRTIO_MSIX_ENABLED (2)
CC: stable@dpdk.org
CC: jianfeng.tan@intel.com
CC: yliu@fridaylinux.org
CC: maxime.coquelin@redhat.com
Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---
Changes in v6:
Change enum type name "VIRTIO_MSIX_STATUS" to "virtio_msix_status".
Changes in v5:
1. Introduce new enum data type "VIRTIO_MSIX_STATUS" instead of macros.
2. Remove the unnecessary comments.
Changes in v4:
Enhance the commit log description.
Changes in v3:
Simply the code according to jianfeng's comments.
Changes in v2:
Add the capability to detect msix if virtio intr changes.
drivers/net/virtio/virtio_ethdev.c | 46 ++++++++++++++++++++++++++++++++------
drivers/net/virtio/virtio_pci.c | 43 +++++++++++++++++++++++++++++++++--
drivers/net/virtio/virtio_pci.h | 8 +++++++
3 files changed, 88 insertions(+), 9 deletions(-)
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index d2576d5e0..87ac2bee6 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -97,6 +97,9 @@ static void virtio_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index);
static void virtio_mac_addr_set(struct rte_eth_dev *dev,
struct ether_addr *mac_addr);
+static int virtio_intr_enable(struct rte_eth_dev *dev);
+static int virtio_intr_disable(struct rte_eth_dev *dev);
+
static int virtio_dev_queue_stats_mapping_set(
struct rte_eth_dev *eth_dev,
uint16_t queue_id,
@@ -618,7 +621,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
virtio_queues_unbind_intr(dev);
if (intr_conf->lsc || intr_conf->rxq) {
- rte_intr_disable(dev->intr_handle);
+ virtio_intr_disable(dev);
rte_intr_efd_disable(dev->intr_handle);
rte_free(dev->intr_handle->intr_vec);
dev->intr_handle->intr_vec = NULL;
@@ -1160,6 +1163,34 @@ virtio_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
}
static int
+virtio_intr_enable(struct rte_eth_dev *dev)
+{
+ struct virtio_hw *hw = dev->data->dev_private;
+
+ if (rte_intr_enable(dev->intr_handle) < 0)
+ return -1;
+
+ if (!hw->virtio_user_dev)
+ hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+ return 0;
+}
+
+static int
+virtio_intr_disable(struct rte_eth_dev *dev)
+{
+ struct virtio_hw *hw = dev->data->dev_private;
+
+ if (rte_intr_disable(dev->intr_handle) < 0)
+ return -1;
+
+ if (!hw->virtio_user_dev)
+ hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
+
+ return 0;
+}
+
+static int
virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
{
uint64_t host_features;
@@ -1228,7 +1259,7 @@ virtio_interrupt_handler(void *param)
isr = vtpci_isr(hw);
PMD_DRV_LOG(INFO, "interrupt status = %#x", isr);
- if (rte_intr_enable(dev->intr_handle) < 0)
+ if (virtio_intr_enable(dev) < 0)
PMD_DRV_LOG(ERR, "interrupt enable failed");
if (isr & VIRTIO_PCI_ISR_CONFIG) {
@@ -1348,7 +1379,7 @@ virtio_configure_intr(struct rte_eth_dev *dev)
* to change the config size from 20 to 24, or VIRTIO_MSI_QUEUE_VECTOR
* (22) will be ignored.
*/
- if (rte_intr_enable(dev->intr_handle) < 0) {
+ if (virtio_intr_enable(dev) < 0) {
PMD_DRV_LOG(ERR, "interrupt enable failed");
return -1;
}
@@ -1388,7 +1419,8 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
}
/* If host does not support both status and MSI-X then disable LSC */
- if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix)
+ if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) &&
+ hw->use_msix != VIRTIO_MSIX_NONE)
eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
else
eth_dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
@@ -1801,9 +1833,9 @@ virtio_dev_start(struct rte_eth_dev *dev)
*/
if (dev->data->dev_conf.intr_conf.lsc ||
dev->data->dev_conf.intr_conf.rxq) {
- rte_intr_disable(dev->intr_handle);
+ virtio_intr_disable(dev);
- if (rte_intr_enable(dev->intr_handle) < 0) {
+ if (virtio_intr_enable(dev) < 0) {
PMD_DRV_LOG(ERR, "interrupt enable failed");
return -EIO;
}
@@ -1912,7 +1944,7 @@ virtio_dev_stop(struct rte_eth_dev *dev)
PMD_INIT_LOG(DEBUG, "stop");
if (intr_conf->lsc || intr_conf->rxq)
- rte_intr_disable(dev->intr_handle);
+ virtio_intr_disable(dev);
hw->started = 0;
memset(&link, 0, sizeof(link));
diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
index 55b717c03..9574498fb 100644
--- a/drivers/net/virtio/virtio_pci.c
+++ b/drivers/net/virtio/virtio_pci.c
@@ -57,7 +57,8 @@
* The remaining space is defined by each driver as the per-driver
* configuration space.
*/
-#define VIRTIO_PCI_CONFIG(hw) (((hw)->use_msix) ? 24 : 20)
+#define VIRTIO_PCI_CONFIG(hw) \
+ (((hw)->use_msix == VIRTIO_MSIX_ENABLED) ? 24 : 20)
static inline int
check_vq_phys_addr_ok(struct virtqueue *vq)
@@ -617,7 +618,9 @@ virtio_read_caps(struct rte_pci_device *dev, struct virtio_hw *hw)
uint16_t flags = ((uint16_t *)&cap)[1];
if (flags & PCI_MSIX_ENABLE)
- hw->use_msix = 1;
+ hw->use_msix = VIRTIO_MSIX_ENABLED;
+ else
+ hw->use_msix = VIRTIO_MSIX_DISABLED;
}
if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
@@ -710,3 +713,39 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
return 0;
}
+
+enum virtio_msix_status
+vtpci_msix_detect(struct rte_pci_device *dev)
+{
+ uint8_t pos;
+ struct virtio_pci_cap cap;
+ int ret;
+
+ ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
+ if (ret < 0) {
+ PMD_INIT_LOG(DEBUG, "failed to read pci capability list");
+ return VIRTIO_MSIX_NONE;
+ }
+
+ while (pos) {
+ ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
+ if (ret < 0) {
+ PMD_INIT_LOG(ERR,
+ "failed to read pci cap at pos: %x", pos);
+ break;
+ }
+
+ if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
+ uint16_t flags = ((uint16_t *)&cap)[1];
+
+ if (flags & PCI_MSIX_ENABLE)
+ return VIRTIO_MSIX_ENABLED;
+ else
+ return VIRTIO_MSIX_DISABLED;
+ }
+
+ pos = cap.cap_next;
+ }
+
+ return VIRTIO_MSIX_NONE;
+}
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index 36d452c06..3c5ce66ce 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -314,6 +314,12 @@ struct virtio_net_config {
/* The alignment to use between consumer and producer parts of vring. */
#define VIRTIO_PCI_VRING_ALIGN 4096
+enum virtio_msix_status {
+ VIRTIO_MSIX_NONE = 0,
+ VIRTIO_MSIX_DISABLED = 1,
+ VIRTIO_MSIX_ENABLED = 2
+};
+
static inline int
vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
{
@@ -339,6 +345,8 @@ void vtpci_read_dev_config(struct virtio_hw *, size_t, void *, int);
uint8_t vtpci_isr(struct virtio_hw *);
+enum virtio_msix_status vtpci_msix_detect(struct rte_pci_device *dev);
+
extern const struct virtio_pci_ops legacy_ops;
extern const struct virtio_pci_ops modern_ops;
extern const struct virtio_pci_ops virtio_user_ops;
--
2.13.3
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-stable] [dpdk-dev] [PATCH v6] net/virtio: fix rxq intr config fails using vfio-pci
2017-11-09 9:21 ` [dpdk-stable] [PATCH v6] " Zhiyong Yang
@ 2017-11-11 14:34 ` Thomas Monjalon
0 siblings, 0 replies; 8+ messages in thread
From: Thomas Monjalon @ 2017-11-11 14:34 UTC (permalink / raw)
To: Zhiyong Yang; +Cc: dev, stable, jianfeng.tan, yliu, maxime.coquelin
09/11/2017 10:21, Zhiyong Yang:
> When running l3fwd-power to test virtio rxq interrupt using vfio
> pci noiommu mode, startup fails. In the function virtio_read_caps,
> the code if (flags & PCI_MSIX_ENABLE) intends to double check
> if vfio msix is enabled or not. However, it is not enable at that
> time. So use_msix is assigned to "0", not "1", which causes the
> failure of configuring rxq intr in l3fwd-power.
> This patch adds the function "vtpci_msix_detect" to detect the status
> of msix when interrupt changes happen.
> In the meanwhile, virtio_intr_enable/disable are introduced to wrap
> rte_intr_enable/disable to enhance the ability to detect msix.
> use_msix can indicate three different msix status by:
> VIRTIO_MSIX_NONE (0)
> VIRTIO_MSIX_DISABLED (1)
> VIRTIO_MSIX_ENABLED (2)
>
> CC: stable@dpdk.org
> CC: jianfeng.tan@intel.com
> CC: yliu@fridaylinux.org
> CC: maxime.coquelin@redhat.com
>
> Fixes: cb482cb3a305 ("net/virtio: fix MAC address read")
> Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
> Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
> Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Applied, thanks
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2017-11-11 14:34 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20171109031818.31040-1-zhiyong.yang@intel.com>
2017-11-09 4:46 ` [dpdk-stable] [PATCH v4] net/virtio: fix rxq intr config fails using vfio-pci Zhiyong Yang
2017-11-09 6:51 ` Tan, Jianfeng
2017-11-09 8:18 ` Maxime Coquelin
2017-11-09 8:55 ` [dpdk-stable] [PATCH v5] " Zhiyong Yang
2017-11-09 9:08 ` Maxime Coquelin
2017-11-09 9:16 ` Yang, Zhiyong
2017-11-09 9:21 ` [dpdk-stable] [PATCH v6] " Zhiyong Yang
2017-11-11 14:34 ` [dpdk-stable] [dpdk-dev] " Thomas Monjalon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).