patches for DPDK stable branches
 help / color / mirror / Atom feed
* [dpdk-stable] [PATCH v9 1/3] ethdev: add an API to get device configuration info
       [not found] ` <20210926092055.495322-1-jie1x.wang@intel.com>
@ 2021-09-26  9:20   ` Jie Wang
  2021-10-04 11:22     ` Ferruh Yigit
  2021-09-26  9:20   ` [dpdk-stable] [PATCH v9 2/3] doc: update release notes for new API Jie Wang
  2021-09-26  9:20   ` [dpdk-stable] [PATCH v9 3/3] app/testpmd: fix testpmd doesn't show RSS hash offload Jie Wang
  2 siblings, 1 reply; 8+ messages in thread
From: Jie Wang @ 2021-09-26  9:20 UTC (permalink / raw)
  To: dev
  Cc: ferruh.yigit, thomas, andrew.rybchenko, xiaoyun.li, stevex.yang,
	Jie Wang, stable

This patch adds a new API "rte_eth_dev_conf_info_get()" to help users get
device configuration info.

Cc: stable@dpdk.org

Signed-off-by: Jie Wang <jie1x.wang@intel.com>
---
 lib/ethdev/rte_ethdev.c | 23 +++++++++++++++++++++++
 lib/ethdev/rte_ethdev.h | 21 +++++++++++++++++++++
 lib/ethdev/version.map  |  3 +++
 3 files changed, 47 insertions(+)

diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index daf5ca9242..a0f521323a 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -3457,6 +3457,29 @@ rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info)
 	return 0;
 }
 
+int
+rte_eth_dev_conf_info_get(uint16_t port_id,
+				struct rte_eth_conf *dev_conf_info)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	if (dev_conf_info == NULL) {
+		RTE_ETHDEV_LOG(ERR,
+			"Cannot get ethdev port %u configuration info to NULL\n",
+			port_id);
+		return -EINVAL;
+	}
+
+	/* copy dev->data->dev_conf to dev_conf_info */
+	memcpy(dev_conf_info, &dev->data->dev_conf,
+		sizeof(struct rte_eth_conf));
+
+	return 0;
+}
+
 int
 rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
 				 uint32_t *ptypes, int num)
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index 1da37896d8..c21ee6a1fe 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -3068,6 +3068,27 @@ int rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr);
  */
 int rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info);
 
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Retrieve the configuration of an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param dev_conf_info
+ *   A pointer to a structure of type *rte_eth_conf* to be filled with
+ *   the configuration of the Ethernet device.
+ *   And the memory of the structure should be allocated by the caller.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+__rte_experimental
+int rte_eth_dev_conf_info_get(uint16_t port_id,
+				struct rte_eth_conf *dev_conf_info);
+
 /**
  * Retrieve the firmware version of a device.
  *
diff --git a/lib/ethdev/version.map b/lib/ethdev/version.map
index 904bce6ea1..4b0a1f0fae 100644
--- a/lib/ethdev/version.map
+++ b/lib/ethdev/version.map
@@ -247,6 +247,9 @@ EXPERIMENTAL {
 	rte_mtr_meter_policy_delete;
 	rte_mtr_meter_policy_update;
 	rte_mtr_meter_policy_validate;
+
+	# added in 21.11
+	rte_eth_dev_conf_info_get;
 };
 
 INTERNAL {
-- 
2.25.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [dpdk-stable] [PATCH v9 2/3] doc: update release notes for new API
       [not found] ` <20210926092055.495322-1-jie1x.wang@intel.com>
  2021-09-26  9:20   ` [dpdk-stable] [PATCH v9 1/3] ethdev: add an API to get device configuration info Jie Wang
@ 2021-09-26  9:20   ` Jie Wang
  2021-10-04 11:22     ` Ferruh Yigit
  2021-09-26  9:20   ` [dpdk-stable] [PATCH v9 3/3] app/testpmd: fix testpmd doesn't show RSS hash offload Jie Wang
  2 siblings, 1 reply; 8+ messages in thread
From: Jie Wang @ 2021-09-26  9:20 UTC (permalink / raw)
  To: dev
  Cc: ferruh.yigit, thomas, andrew.rybchenko, xiaoyun.li, stevex.yang,
	Jie Wang, stable

Add information about new ethdev API.

Cc: stable@dpdk.org

Signed-off-by: Jie Wang <jie1x.wang@intel.com>
---
 doc/guides/rel_notes/release_21_11.rst | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/doc/guides/rel_notes/release_21_11.rst b/doc/guides/rel_notes/release_21_11.rst
index dcff939ae8..95e569f51c 100644
--- a/doc/guides/rel_notes/release_21_11.rst
+++ b/doc/guides/rel_notes/release_21_11.rst
@@ -111,6 +111,10 @@ New Features
   Added command-line options to specify total number of processes and
   current process ID. Each process owns subset of Rx and Tx queues.
 
+* **Added support for users get device configuration.**
+  Added an API which can help users get device configuration.
+  The declarations for the API's can be found in ``rte_ethdev.h``.
+
 
 Removed Items
 -------------
-- 
2.25.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [dpdk-stable] [PATCH v9 3/3] app/testpmd: fix testpmd doesn't show RSS hash offload
       [not found] ` <20210926092055.495322-1-jie1x.wang@intel.com>
  2021-09-26  9:20   ` [dpdk-stable] [PATCH v9 1/3] ethdev: add an API to get device configuration info Jie Wang
  2021-09-26  9:20   ` [dpdk-stable] [PATCH v9 2/3] doc: update release notes for new API Jie Wang
@ 2021-09-26  9:20   ` Jie Wang
  2 siblings, 0 replies; 8+ messages in thread
From: Jie Wang @ 2021-09-26  9:20 UTC (permalink / raw)
  To: dev
  Cc: ferruh.yigit, thomas, andrew.rybchenko, xiaoyun.li, stevex.yang,
	Jie Wang, stable

The driver may change offloads info into dev->data->dev_conf
in dev_configure which may cause port->dev_conf and port->rx_conf
contain outdated values.

This patch updates the offloads info if it changes to fix this issue.

Fixes: ce8d561418d4 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org

Signed-off-by: Jie Wang <jie1x.wang@intel.com>
---
 app/test-pmd/cmdline.c | 14 ++++++++++++--
 app/test-pmd/testpmd.c | 34 ++++++++++++++++++++++++++++++++++
 app/test-pmd/testpmd.h |  2 ++
 app/test-pmd/util.c    | 15 +++++++++++++++
 4 files changed, 63 insertions(+), 2 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a9efd027c3..3ef8f99358 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -15997,6 +15997,7 @@ cmd_rx_offload_get_configuration_parsed(
 	struct rte_eth_dev_info dev_info;
 	portid_t port_id = res->port_id;
 	struct rte_port *port = &ports[port_id];
+	struct rte_eth_conf dev_conf_info;
 	uint64_t port_offloads;
 	uint64_t queue_offloads;
 	uint16_t nb_rx_queues;
@@ -16005,7 +16006,11 @@ cmd_rx_offload_get_configuration_parsed(
 
 	printf("Rx Offloading Configuration of port %d :\n", port_id);
 
-	port_offloads = port->dev_conf.rxmode.offloads;
+	ret = eth_dev_conf_info_get_print_err(port_id, &dev_conf_info);
+	if (ret != 0)
+		return;
+
+	port_offloads = dev_conf_info.rxmode.offloads;
 	printf("  Port :");
 	print_rx_offloads(port_offloads);
 	printf("\n");
@@ -16411,6 +16416,7 @@ cmd_tx_offload_get_configuration_parsed(
 	struct rte_eth_dev_info dev_info;
 	portid_t port_id = res->port_id;
 	struct rte_port *port = &ports[port_id];
+	struct rte_eth_conf dev_conf_info;
 	uint64_t port_offloads;
 	uint64_t queue_offloads;
 	uint16_t nb_tx_queues;
@@ -16419,7 +16425,11 @@ cmd_tx_offload_get_configuration_parsed(
 
 	printf("Tx Offloading Configuration of port %d :\n", port_id);
 
-	port_offloads = port->dev_conf.txmode.offloads;
+	ret = eth_dev_conf_info_get_print_err(port_id, &dev_conf_info);
+	if (ret != 0)
+		return;
+
+	port_offloads = dev_conf_info.txmode.offloads;
 	printf("  Port :");
 	print_tx_offloads(port_offloads);
 	printf("\n");
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 97ae52e17e..56e6e80739 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -2531,6 +2531,9 @@ start_port(portid_t pid)
 		}
 
 		if (port->need_reconfig > 0) {
+			struct rte_eth_conf dev_conf_info;
+			int k;
+
 			port->need_reconfig = 0;
 
 			if (flow_isolate_all) {
@@ -2568,6 +2571,37 @@ start_port(portid_t pid)
 				port->need_reconfig = 1;
 				return -1;
 			}
+			/* get rte_eth_conf info */
+			if (0 !=
+				eth_dev_conf_info_get_print_err(pi,
+							&dev_conf_info)) {
+				fprintf(stderr,
+					"port %d can not get device configuration info\n",
+					pi);
+				return -1;
+			}
+			/* Apply Rx offloads configuration */
+			if (dev_conf_info.rxmode.offloads !=
+			    port->dev_conf.rxmode.offloads) {
+				port->dev_conf.rxmode.offloads |=
+					dev_conf_info.rxmode.offloads;
+				for (k = 0;
+				     k < port->dev_info.max_rx_queues;
+				     k++)
+					port->rx_conf[k].offloads |=
+						dev_conf_info.rxmode.offloads;
+			}
+			/* Apply Tx offloads configuration */
+			if (dev_conf_info.txmode.offloads !=
+			    port->dev_conf.txmode.offloads) {
+				port->dev_conf.txmode.offloads |=
+					dev_conf_info.txmode.offloads;
+				for (k = 0;
+				     k < port->dev_info.max_tx_queues;
+				     k++)
+					port->tx_conf[k].offloads |=
+						dev_conf_info.txmode.offloads;
+			}
 		}
 		if (port->need_reconfig_queues > 0 && is_proc_primary()) {
 			port->need_reconfig_queues = 0;
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 5863b2f43f..48dad40986 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -960,6 +960,8 @@ void show_gro(portid_t port_id);
 void setup_gso(const char *mode, portid_t port_id);
 int eth_dev_info_get_print_err(uint16_t port_id,
 			struct rte_eth_dev_info *dev_info);
+int eth_dev_conf_info_get_print_err(uint16_t port_id,
+			struct rte_eth_conf *dev_conf_info);
 void eth_set_promisc_mode(uint16_t port_id, int enable);
 void eth_set_allmulticast_mode(uint16_t port, int enable);
 int eth_link_get_nowait_print_err(uint16_t port_id, struct rte_eth_link *link);
diff --git a/app/test-pmd/util.c b/app/test-pmd/util.c
index 14a9a251fb..f04786c50f 100644
--- a/app/test-pmd/util.c
+++ b/app/test-pmd/util.c
@@ -444,6 +444,21 @@ eth_dev_info_get_print_err(uint16_t port_id,
 	return ret;
 }
 
+int
+eth_dev_conf_info_get_print_err(uint16_t port_id,
+				struct rte_eth_conf *dev_conf_info)
+{
+	int ret;
+
+	ret = rte_eth_dev_conf_info_get(port_id, dev_conf_info);
+	if (ret != 0)
+		fprintf(stderr,
+			"Error during getting device configuration (port %u) info: %s\n",
+			port_id, strerror(-ret));
+
+	return ret;
+}
+
 void
 eth_set_promisc_mode(uint16_t port, int enable)
 {
-- 
2.25.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-stable] [PATCH v9 1/3] ethdev: add an API to get device configuration info
  2021-09-26  9:20   ` [dpdk-stable] [PATCH v9 1/3] ethdev: add an API to get device configuration info Jie Wang
@ 2021-10-04 11:22     ` Ferruh Yigit
  2021-10-04 11:26       ` Thomas Monjalon
  0 siblings, 1 reply; 8+ messages in thread
From: Ferruh Yigit @ 2021-10-04 11:22 UTC (permalink / raw)
  To: Jie Wang, dev; +Cc: thomas, andrew.rybchenko, xiaoyun.li, stevex.yang, stable

On 9/26/2021 10:20 AM, Jie Wang wrote:
> This patch adds a new API "rte_eth_dev_conf_info_get()" to help users get
> device configuration info.
> 
> Cc: stable@dpdk.org
> 

Since this is a new API, I think we can request it to be backported.

> Signed-off-by: Jie Wang <jie1x.wang@intel.com>

<...>

> @@ -247,6 +247,9 @@ EXPERIMENTAL {
>  	rte_mtr_meter_policy_delete;
>  	rte_mtr_meter_policy_update;
>  	rte_mtr_meter_policy_validate;
> +
> +	# added in 21.11
> +	rte_eth_dev_conf_info_get;

Not sure about the 'info' part in the API, what about 'rte_eth_dev_conf_get()'?

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-stable] [PATCH v9 2/3] doc: update release notes for new API
  2021-09-26  9:20   ` [dpdk-stable] [PATCH v9 2/3] doc: update release notes for new API Jie Wang
@ 2021-10-04 11:22     ` Ferruh Yigit
  2021-10-04 11:26       ` Thomas Monjalon
  0 siblings, 1 reply; 8+ messages in thread
From: Ferruh Yigit @ 2021-10-04 11:22 UTC (permalink / raw)
  To: Jie Wang, dev; +Cc: thomas, andrew.rybchenko, xiaoyun.li, stevex.yang, stable

On 9/26/2021 10:20 AM, Jie Wang wrote:
> Add information about new ethdev API.
> 
> Cc: stable@dpdk.org
> 
> Signed-off-by: Jie Wang <jie1x.wang@intel.com>
> ---
>  doc/guides/rel_notes/release_21_11.rst | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/doc/guides/rel_notes/release_21_11.rst b/doc/guides/rel_notes/release_21_11.rst
> index dcff939ae8..95e569f51c 100644
> --- a/doc/guides/rel_notes/release_21_11.rst
> +++ b/doc/guides/rel_notes/release_21_11.rst
> @@ -111,6 +111,10 @@ New Features
>    Added command-line options to specify total number of processes and
>    current process ID. Each process owns subset of Rx and Tx queues.
>  
> +* **Added support for users get device configuration.**
> +  Added an API which can help users get device configuration.
> +  The declarations for the API's can be found in ``rte_ethdev.h``.
> +
>  

No need to have a separate patch for release notes update, can you please merge
this one with 1/3 patch?

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-stable] [PATCH v9 1/3] ethdev: add an API to get device configuration info
  2021-10-04 11:22     ` Ferruh Yigit
@ 2021-10-04 11:26       ` Thomas Monjalon
  2021-10-04 11:35         ` Ferruh Yigit
  0 siblings, 1 reply; 8+ messages in thread
From: Thomas Monjalon @ 2021-10-04 11:26 UTC (permalink / raw)
  To: Jie Wang, dev, Ferruh Yigit
  Cc: andrew.rybchenko, xiaoyun.li, stevex.yang, stable

04/10/2021 13:22, Ferruh Yigit:
> On 9/26/2021 10:20 AM, Jie Wang wrote:
> > This patch adds a new API "rte_eth_dev_conf_info_get()" to help users get
> > device configuration info.
> > 
> > Cc: stable@dpdk.org
> > 
> 
> Since this is a new API, I think we can request it to be backported.

We cannot.

> > Signed-off-by: Jie Wang <jie1x.wang@intel.com>
> 
> <...>
> 
> > @@ -247,6 +247,9 @@ EXPERIMENTAL {
> >  	rte_mtr_meter_policy_delete;
> >  	rte_mtr_meter_policy_update;
> >  	rte_mtr_meter_policy_validate;
> > +
> > +	# added in 21.11
> > +	rte_eth_dev_conf_info_get;
> 
> Not sure about the 'info' part in the API, what about 'rte_eth_dev_conf_get()'?

+1



^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-stable] [PATCH v9 2/3] doc: update release notes for new API
  2021-10-04 11:22     ` Ferruh Yigit
@ 2021-10-04 11:26       ` Thomas Monjalon
  0 siblings, 0 replies; 8+ messages in thread
From: Thomas Monjalon @ 2021-10-04 11:26 UTC (permalink / raw)
  To: Jie Wang, dev, Ferruh Yigit
  Cc: andrew.rybchenko, xiaoyun.li, stevex.yang, stable

04/10/2021 13:22, Ferruh Yigit:
> On 9/26/2021 10:20 AM, Jie Wang wrote:
> > Add information about new ethdev API.
> > 
> > Cc: stable@dpdk.org
> > 
> > Signed-off-by: Jie Wang <jie1x.wang@intel.com>
> > ---
> >  doc/guides/rel_notes/release_21_11.rst | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/doc/guides/rel_notes/release_21_11.rst b/doc/guides/rel_notes/release_21_11.rst
> > index dcff939ae8..95e569f51c 100644
> > --- a/doc/guides/rel_notes/release_21_11.rst
> > +++ b/doc/guides/rel_notes/release_21_11.rst
> > @@ -111,6 +111,10 @@ New Features
> >    Added command-line options to specify total number of processes and
> >    current process ID. Each process owns subset of Rx and Tx queues.
> >  
> > +* **Added support for users get device configuration.**
> > +  Added an API which can help users get device configuration.
> > +  The declarations for the API's can be found in ``rte_ethdev.h``.
> > +
> >  
> 
> No need to have a separate patch for release notes update, can you please merge
> this one with 1/3 patch?

*not* have a separate patch



^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-stable] [PATCH v9 1/3] ethdev: add an API to get device configuration info
  2021-10-04 11:26       ` Thomas Monjalon
@ 2021-10-04 11:35         ` Ferruh Yigit
  0 siblings, 0 replies; 8+ messages in thread
From: Ferruh Yigit @ 2021-10-04 11:35 UTC (permalink / raw)
  To: Thomas Monjalon, Jie Wang, dev
  Cc: andrew.rybchenko, xiaoyun.li, stevex.yang, stable

On 10/4/2021 12:26 PM, Thomas Monjalon wrote:
> 04/10/2021 13:22, Ferruh Yigit:
>> On 9/26/2021 10:20 AM, Jie Wang wrote:
>>> This patch adds a new API "rte_eth_dev_conf_info_get()" to help users get
>>> device configuration info.
>>>
>>> Cc: stable@dpdk.org
>>>
>>
>> Since this is a new API, I think we can request it to be backported.
> 
> We cannot.
> 

Of course, it is a typo in my end, I mean "we can NOT request ..."

>>> Signed-off-by: Jie Wang <jie1x.wang@intel.com>
>>
>> <...>
>>
>>> @@ -247,6 +247,9 @@ EXPERIMENTAL {
>>>  	rte_mtr_meter_policy_delete;
>>>  	rte_mtr_meter_policy_update;
>>>  	rte_mtr_meter_policy_validate;
>>> +
>>> +	# added in 21.11
>>> +	rte_eth_dev_conf_info_get;
>>
>> Not sure about the 'info' part in the API, what about 'rte_eth_dev_conf_get()'?
> 
> +1
> 
> 


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2021-10-04 11:36 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20210827081740.365037-1-jie1x.wang@intel.com>
     [not found] ` <20210926092055.495322-1-jie1x.wang@intel.com>
2021-09-26  9:20   ` [dpdk-stable] [PATCH v9 1/3] ethdev: add an API to get device configuration info Jie Wang
2021-10-04 11:22     ` Ferruh Yigit
2021-10-04 11:26       ` Thomas Monjalon
2021-10-04 11:35         ` Ferruh Yigit
2021-09-26  9:20   ` [dpdk-stable] [PATCH v9 2/3] doc: update release notes for new API Jie Wang
2021-10-04 11:22     ` Ferruh Yigit
2021-10-04 11:26       ` Thomas Monjalon
2021-09-26  9:20   ` [dpdk-stable] [PATCH v9 3/3] app/testpmd: fix testpmd doesn't show RSS hash offload Jie Wang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).