patches for DPDK stable branches
 help / color / mirror / Atom feed
* [dpdk-stable] [PATCH] net/bnxt: fix packet type
@ 2018-02-06 17:07 Olivier Matz
  2018-02-06 23:23 ` Ajit Khaparde
  2018-02-08  8:24 ` [dpdk-stable] [PATCH v2] " Olivier Matz
  0 siblings, 2 replies; 5+ messages in thread
From: Olivier Matz @ 2018-02-06 17:07 UTC (permalink / raw)
  To: dev, Ajit Khaparde, Somnath Kotur; +Cc: stable

The hw flags are not read correctly: the defines
RX_PKT_CMPL_FLAGS_ITYPE_* are not bits but values, so the should not be
tested with if (value & X) but with if ((value & MASK) == X).
This was resulting in a wrong packet type.

For instance, an IPv4/ICMP packet was returning a value of 7 for
the layer 4, which is undefined.

This patch rework the way packet types are processed, to ensure
that only valid packet types will be advertised.

Fixes: 3d2a6644eb05 ("net/bnxt: support getting ptypes")
Cc: stable@dpdk.org

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---
 drivers/net/bnxt/bnxt_rxr.c | 75 ++++++++++++++++++++++++++++-----------------
 1 file changed, 47 insertions(+), 28 deletions(-)

diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
index 9b88a64bf..2b4044a83 100644
--- a/drivers/net/bnxt/bnxt_rxr.c
+++ b/drivers/net/bnxt/bnxt_rxr.c
@@ -338,41 +338,60 @@ static inline struct rte_mbuf *bnxt_tpa_end(
 static uint32_t
 bnxt_parse_pkt_type(struct rx_pkt_cmpl *rxcmp, struct rx_pkt_cmpl_hi *rxcmp1)
 {
-	uint32_t pkt_type = 0;
-	uint32_t t_ipcs = 0, ip = 0, ip6 = 0;
-	uint32_t tcp = 0, udp = 0, icmp = 0;
-	uint32_t vlan = 0;
+	uint32_t l3, pkt_type = 0;
+	uint32_t t_ipcs = 0, ip6 = 0, vlan = 0;
+	uint32_t flags_type;
 
 	vlan = !!(rxcmp1->flags2 &
 		rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN));
+	pkt_type |= vlan ? RTE_PTYPE_L2_ETHER_VLAN : RTE_PTYPE_L2_ETHER;
+
 	t_ipcs = !!(rxcmp1->flags2 &
 		rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_T_IP_CS_CALC));
 	ip6 = !!(rxcmp1->flags2 &
 		 rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_IP_TYPE));
-	icmp = !!(rxcmp->flags_type &
-		  rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_ICMP));
-	tcp = !!(rxcmp->flags_type &
-		 rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_TCP));
-	udp = !!(rxcmp->flags_type &
-		 rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_UDP));
-	ip = !!(rxcmp->flags_type &
-		rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_IP));
-
-	pkt_type |= ((ip || tcp || udp || icmp) && !t_ipcs && !ip6) ?
-		RTE_PTYPE_L3_IPV4_EXT_UNKNOWN : 0;
-	pkt_type |= ((ip || tcp || udp || icmp) && !t_ipcs && ip6) ?
-		RTE_PTYPE_L3_IPV6_EXT_UNKNOWN : 0;
-	pkt_type |= (!t_ipcs &&  icmp) ? RTE_PTYPE_L4_ICMP : 0;
-	pkt_type |= (!t_ipcs &&  udp) ? RTE_PTYPE_L4_UDP : 0;
-	pkt_type |= (!t_ipcs &&  tcp) ? RTE_PTYPE_L4_TCP : 0;
-	pkt_type |= ((ip || tcp || udp || icmp) && t_ipcs && !ip6) ?
-		RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN : 0;
-	pkt_type |= ((ip || tcp || udp || icmp) && t_ipcs && ip6) ?
-		RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN : 0;
-	pkt_type |= (t_ipcs &&  icmp) ? RTE_PTYPE_INNER_L4_ICMP : 0;
-	pkt_type |= (t_ipcs &&  udp) ? RTE_PTYPE_INNER_L4_UDP : 0;
-	pkt_type |= (t_ipcs &&  tcp) ? RTE_PTYPE_INNER_L4_TCP : 0;
-	pkt_type |= vlan ? RTE_PTYPE_L2_ETHER_VLAN : 0;
+
+	flags_type = rxcmp->flags_type &
+		rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS_ITYPE_MASK);
+
+	if (!t_ipcs && !ip6)
+		l3 = RTE_PTYPE_L3_IPV4_EXT_UNKNOWN;
+	else if (!t_ipcs && ip6)
+		l3 = RTE_PTYPE_L3_IPV6_EXT_UNKNOWN;
+	else if (t_ipcs && !ip6)
+		l3 = RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN;
+	else
+		l3 = RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN;
+
+	switch (flags_type) {
+	case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_ICMP):
+		if (!t_ipcs)
+			pkt_type |= l3 | RTE_PTYPE_L4_ICMP;
+		else
+			pkt_type |= l3 | RTE_PTYPE_INNER_L4_ICMP;
+		break;
+
+	case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_TCP):
+		if (!t_ipcs)
+			pkt_type |= l3 | RTE_PTYPE_L4_TCP;
+		else
+			pkt_type |= l3 | RTE_PTYPE_INNER_L4_TCP;
+		break;
+
+	case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_UDP):
+		if (!t_ipcs)
+			pkt_type |= l3 | RTE_PTYPE_L4_UDP;
+		else
+			pkt_type |= l3 | RTE_PTYPE_INNER_L4_UDP;
+		break;
+
+	case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_IP):
+		if (!t_ipcs)
+			pkt_type |= l3 | RTE_PTYPE_L4_ICMP;
+		else
+			pkt_type |= l3 | RTE_PTYPE_INNER_L4_ICMP;
+		break;
+	}
 
 	return pkt_type;
 }
-- 
2.11.0

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-stable] [PATCH] net/bnxt: fix packet type
  2018-02-06 17:07 [dpdk-stable] [PATCH] net/bnxt: fix packet type Olivier Matz
@ 2018-02-06 23:23 ` Ajit Khaparde
  2018-02-07 21:56   ` Olivier Matz
  2018-02-08  8:24 ` [dpdk-stable] [PATCH v2] " Olivier Matz
  1 sibling, 1 reply; 5+ messages in thread
From: Ajit Khaparde @ 2018-02-06 23:23 UTC (permalink / raw)
  To: Olivier Matz; +Cc: dev, Somnath Kotur, dpdk stable

On Tue, Feb 6, 2018 at 9:07 AM, Olivier Matz <olivier.matz@6wind.com> wrote:

> The hw flags are not read correctly: the defines
> RX_PKT_CMPL_FLAGS_ITYPE_* are not bits but values, so the should not be
> tested with if (value & X) but with if ((value & MASK) == X).
> This was resulting in a wrong packet type.
>
> For instance, an IPv4/ICMP packet was returning a value of 7 for
> the layer 4, which is undefined.
>
> This patch rework the way packet types are processed, to ensure
> that only valid packet types will be advertised.
>
> Fixes: 3d2a6644eb05 ("net/bnxt: support getting ptypes")
> Cc: stable@dpdk.org
>
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
>
​Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
​


> ---
>  drivers/net/bnxt/bnxt_rxr.c | 75 ++++++++++++++++++++++++++++--
> ---------------
>  1 file changed, 47 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
> index 9b88a64bf..2b4044a83 100644
> --- a/drivers/net/bnxt/bnxt_rxr.c
> +++ b/drivers/net/bnxt/bnxt_rxr.c
> @@ -338,41 +338,60 @@ static inline struct rte_mbuf *bnxt_tpa_end(
>  static uint32_t
>  bnxt_parse_pkt_type(struct rx_pkt_cmpl *rxcmp, struct rx_pkt_cmpl_hi
> *rxcmp1)
>  {
> -       uint32_t pkt_type = 0;
> -       uint32_t t_ipcs = 0, ip = 0, ip6 = 0;
> -       uint32_t tcp = 0, udp = 0, icmp = 0;
> -       uint32_t vlan = 0;
> +       uint32_t l3, pkt_type = 0;
> +       uint32_t t_ipcs = 0, ip6 = 0, vlan = 0;
> +       uint32_t flags_type;
>
>         vlan = !!(rxcmp1->flags2 &
>                 rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN));
> +       pkt_type |= vlan ? RTE_PTYPE_L2_ETHER_VLAN : RTE_PTYPE_L2_ETHER;
> +
>         t_ipcs = !!(rxcmp1->flags2 &
>                 rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_T_IP_CS_CALC));
>         ip6 = !!(rxcmp1->flags2 &
>                  rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_IP_TYPE));
> -       icmp = !!(rxcmp->flags_type &
> -                 rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_ICMP));
> -       tcp = !!(rxcmp->flags_type &
> -                rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_TCP));
> -       udp = !!(rxcmp->flags_type &
> -                rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_UDP));
> -       ip = !!(rxcmp->flags_type &
> -               rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_IP));
> -
> -       pkt_type |= ((ip || tcp || udp || icmp) && !t_ipcs && !ip6) ?
> -               RTE_PTYPE_L3_IPV4_EXT_UNKNOWN : 0;
> -       pkt_type |= ((ip || tcp || udp || icmp) && !t_ipcs && ip6) ?
> -               RTE_PTYPE_L3_IPV6_EXT_UNKNOWN : 0;
> -       pkt_type |= (!t_ipcs &&  icmp) ? RTE_PTYPE_L4_ICMP : 0;
> -       pkt_type |= (!t_ipcs &&  udp) ? RTE_PTYPE_L4_UDP : 0;
> -       pkt_type |= (!t_ipcs &&  tcp) ? RTE_PTYPE_L4_TCP : 0;
> -       pkt_type |= ((ip || tcp || udp || icmp) && t_ipcs && !ip6) ?
> -               RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN : 0;
> -       pkt_type |= ((ip || tcp || udp || icmp) && t_ipcs && ip6) ?
> -               RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN : 0;
> -       pkt_type |= (t_ipcs &&  icmp) ? RTE_PTYPE_INNER_L4_ICMP : 0;
> -       pkt_type |= (t_ipcs &&  udp) ? RTE_PTYPE_INNER_L4_UDP : 0;
> -       pkt_type |= (t_ipcs &&  tcp) ? RTE_PTYPE_INNER_L4_TCP : 0;
> -       pkt_type |= vlan ? RTE_PTYPE_L2_ETHER_VLAN : 0;
> +
> +       flags_type = rxcmp->flags_type &
> +               rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS_ITYPE_MASK);
> +
> +       if (!t_ipcs && !ip6)
> +               l3 = RTE_PTYPE_L3_IPV4_EXT_UNKNOWN;
> +       else if (!t_ipcs && ip6)
> +               l3 = RTE_PTYPE_L3_IPV6_EXT_UNKNOWN;
> +       else if (t_ipcs && !ip6)
> +               l3 = RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN;
> +       else
> +               l3 = RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN;
> +
> +       switch (flags_type) {
> +       case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_ICMP):
> +               if (!t_ipcs)
> +                       pkt_type |= l3 | RTE_PTYPE_L4_ICMP;
> +               else
> +                       pkt_type |= l3 | RTE_PTYPE_INNER_L4_ICMP;
> +               break;
> +
> +       case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_TCP):
> +               if (!t_ipcs)
> +                       pkt_type |= l3 | RTE_PTYPE_L4_TCP;
> +               else
> +                       pkt_type |= l3 | RTE_PTYPE_INNER_L4_TCP;
> +               break;
> +
> +       case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_UDP):
> +               if (!t_ipcs)
> +                       pkt_type |= l3 | RTE_PTYPE_L4_UDP;
> +               else
> +                       pkt_type |= l3 | RTE_PTYPE_INNER_L4_UDP;
> +               break;
> +
> +       case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_IP):
> +               if (!t_ipcs)
> +                       pkt_type |= l3 | RTE_PTYPE_L4_ICMP;
> +               else
> +                       pkt_type |= l3 | RTE_PTYPE_INNER_L4_ICMP;
> +               break;
> +       }
>
>         return pkt_type;
>  }
> --
> 2.11.0
>
>

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-stable] [PATCH] net/bnxt: fix packet type
  2018-02-06 23:23 ` Ajit Khaparde
@ 2018-02-07 21:56   ` Olivier Matz
  0 siblings, 0 replies; 5+ messages in thread
From: Olivier Matz @ 2018-02-07 21:56 UTC (permalink / raw)
  To: Ajit Khaparde; +Cc: dev, Somnath Kotur, dpdk stable

Hi,

On Tue, Feb 06, 2018 at 03:23:34PM -0800, Ajit Khaparde wrote:
> On Tue, Feb 6, 2018 at 9:07 AM, Olivier Matz <olivier.matz@6wind.com> wrote:
> 
> > The hw flags are not read correctly: the defines
> > RX_PKT_CMPL_FLAGS_ITYPE_* are not bits but values, so the should not be
> > tested with if (value & X) but with if ((value & MASK) == X).
> > This was resulting in a wrong packet type.
> >
> > For instance, an IPv4/ICMP packet was returning a value of 7 for
> > the layer 4, which is undefined.
> >
> > This patch rework the way packet types are processed, to ensure
> > that only valid packet types will be advertised.
> >
> > Fixes: 3d2a6644eb05 ("net/bnxt: support getting ptypes")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> >
> ​Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
> ​

[...]

> > +       case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_UDP):
> > +               if (!t_ipcs)
> > +                       pkt_type |= l3 | RTE_PTYPE_L4_UDP;
> > +               else
> > +                       pkt_type |= l3 | RTE_PTYPE_INNER_L4_UDP;
> > +               break;
> > +
> > +       case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_IP):
> > +               if (!t_ipcs)
> > +                       pkt_type |= l3 | RTE_PTYPE_L4_ICMP;
> > +               else
> > +                       pkt_type |= l3 | RTE_PTYPE_INNER_L4_ICMP;
> > +               break;
> > +       }

Sorry, it looks there is a typo here: it should be pkt_type |= l3
(not ICMP). I'll send a new version.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [dpdk-stable] [PATCH v2] net/bnxt: fix packet type
  2018-02-06 17:07 [dpdk-stable] [PATCH] net/bnxt: fix packet type Olivier Matz
  2018-02-06 23:23 ` Ajit Khaparde
@ 2018-02-08  8:24 ` Olivier Matz
  2018-02-08 13:30   ` Ferruh Yigit
  1 sibling, 1 reply; 5+ messages in thread
From: Olivier Matz @ 2018-02-08  8:24 UTC (permalink / raw)
  To: dev, Ajit Khaparde, Somnath Kotur; +Cc: stable

The hw flags are not read correctly: the defines
RX_PKT_CMPL_FLAGS_ITYPE_* are not bits but values, so the should not be
tested with if (value & X) but with if ((value & MASK) == X).
This was resulting in a wrong packet type.

For instance, an IPv4/ICMP packet was returning a value of 7 for
the layer 4, which is undefined.

This patch rework the way packet types are processed, to ensure
that only valid packet types will be advertised.

Fixes: 3d2a6644eb05 ("net/bnxt: support getting ptypes")
Cc: stable@dpdk.org

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
 drivers/net/bnxt/bnxt_rxr.c | 72 +++++++++++++++++++++++++++------------------
 1 file changed, 44 insertions(+), 28 deletions(-)

diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
index 9b88a64bf..df7c8178a 100644
--- a/drivers/net/bnxt/bnxt_rxr.c
+++ b/drivers/net/bnxt/bnxt_rxr.c
@@ -338,41 +338,57 @@ static inline struct rte_mbuf *bnxt_tpa_end(
 static uint32_t
 bnxt_parse_pkt_type(struct rx_pkt_cmpl *rxcmp, struct rx_pkt_cmpl_hi *rxcmp1)
 {
-	uint32_t pkt_type = 0;
-	uint32_t t_ipcs = 0, ip = 0, ip6 = 0;
-	uint32_t tcp = 0, udp = 0, icmp = 0;
-	uint32_t vlan = 0;
+	uint32_t l3, pkt_type = 0;
+	uint32_t t_ipcs = 0, ip6 = 0, vlan = 0;
+	uint32_t flags_type;
 
 	vlan = !!(rxcmp1->flags2 &
 		rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN));
+	pkt_type |= vlan ? RTE_PTYPE_L2_ETHER_VLAN : RTE_PTYPE_L2_ETHER;
+
 	t_ipcs = !!(rxcmp1->flags2 &
 		rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_T_IP_CS_CALC));
 	ip6 = !!(rxcmp1->flags2 &
 		 rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS2_IP_TYPE));
-	icmp = !!(rxcmp->flags_type &
-		  rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_ICMP));
-	tcp = !!(rxcmp->flags_type &
-		 rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_TCP));
-	udp = !!(rxcmp->flags_type &
-		 rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_UDP));
-	ip = !!(rxcmp->flags_type &
-		rte_cpu_to_le_16(RX_PKT_CMPL_FLAGS_ITYPE_IP));
-
-	pkt_type |= ((ip || tcp || udp || icmp) && !t_ipcs && !ip6) ?
-		RTE_PTYPE_L3_IPV4_EXT_UNKNOWN : 0;
-	pkt_type |= ((ip || tcp || udp || icmp) && !t_ipcs && ip6) ?
-		RTE_PTYPE_L3_IPV6_EXT_UNKNOWN : 0;
-	pkt_type |= (!t_ipcs &&  icmp) ? RTE_PTYPE_L4_ICMP : 0;
-	pkt_type |= (!t_ipcs &&  udp) ? RTE_PTYPE_L4_UDP : 0;
-	pkt_type |= (!t_ipcs &&  tcp) ? RTE_PTYPE_L4_TCP : 0;
-	pkt_type |= ((ip || tcp || udp || icmp) && t_ipcs && !ip6) ?
-		RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN : 0;
-	pkt_type |= ((ip || tcp || udp || icmp) && t_ipcs && ip6) ?
-		RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN : 0;
-	pkt_type |= (t_ipcs &&  icmp) ? RTE_PTYPE_INNER_L4_ICMP : 0;
-	pkt_type |= (t_ipcs &&  udp) ? RTE_PTYPE_INNER_L4_UDP : 0;
-	pkt_type |= (t_ipcs &&  tcp) ? RTE_PTYPE_INNER_L4_TCP : 0;
-	pkt_type |= vlan ? RTE_PTYPE_L2_ETHER_VLAN : 0;
+
+	flags_type = rxcmp->flags_type &
+		rte_cpu_to_le_32(RX_PKT_CMPL_FLAGS_ITYPE_MASK);
+
+	if (!t_ipcs && !ip6)
+		l3 = RTE_PTYPE_L3_IPV4_EXT_UNKNOWN;
+	else if (!t_ipcs && ip6)
+		l3 = RTE_PTYPE_L3_IPV6_EXT_UNKNOWN;
+	else if (t_ipcs && !ip6)
+		l3 = RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN;
+	else
+		l3 = RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN;
+
+	switch (flags_type) {
+	case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_ICMP):
+		if (!t_ipcs)
+			pkt_type |= l3 | RTE_PTYPE_L4_ICMP;
+		else
+			pkt_type |= l3 | RTE_PTYPE_INNER_L4_ICMP;
+		break;
+
+	case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_TCP):
+		if (!t_ipcs)
+			pkt_type |= l3 | RTE_PTYPE_L4_TCP;
+		else
+			pkt_type |= l3 | RTE_PTYPE_INNER_L4_TCP;
+		break;
+
+	case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_UDP):
+		if (!t_ipcs)
+			pkt_type |= l3 | RTE_PTYPE_L4_UDP;
+		else
+			pkt_type |= l3 | RTE_PTYPE_INNER_L4_UDP;
+		break;
+
+	case RTE_LE32(RX_PKT_CMPL_FLAGS_ITYPE_IP):
+		pkt_type |= l3;
+		break;
+	}
 
 	return pkt_type;
 }
-- 
2.11.0

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-stable] [PATCH v2] net/bnxt: fix packet type
  2018-02-08  8:24 ` [dpdk-stable] [PATCH v2] " Olivier Matz
@ 2018-02-08 13:30   ` Ferruh Yigit
  0 siblings, 0 replies; 5+ messages in thread
From: Ferruh Yigit @ 2018-02-08 13:30 UTC (permalink / raw)
  To: Olivier Matz, dev, Ajit Khaparde, Somnath Kotur; +Cc: stable

On 2/8/2018 8:24 AM, Olivier Matz wrote:
> The hw flags are not read correctly: the defines
> RX_PKT_CMPL_FLAGS_ITYPE_* are not bits but values, so the should not be
> tested with if (value & X) but with if ((value & MASK) == X).
> This was resulting in a wrong packet type.
> 
> For instance, an IPv4/ICMP packet was returning a value of 7 for
> the layer 4, which is undefined.
> 
> This patch rework the way packet types are processed, to ensure
> that only valid packet types will be advertised.
> 
> Fixes: 3d2a6644eb05 ("net/bnxt: support getting ptypes")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

Applied to dpdk-next-net/master, thanks.

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2018-02-08 13:30 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-02-06 17:07 [dpdk-stable] [PATCH] net/bnxt: fix packet type Olivier Matz
2018-02-06 23:23 ` Ajit Khaparde
2018-02-07 21:56   ` Olivier Matz
2018-02-08  8:24 ` [dpdk-stable] [PATCH v2] " Olivier Matz
2018-02-08 13:30   ` Ferruh Yigit

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).