From: sys_stv@intel.com
To: test-report@dpdk.org
Cc: xinfengx.zhao@intel.com, zhaoyan.chen@intel.com
Subject: [dpdk-test-report] |FAILURE| pw38510[dpdk-dev, v5, 10/16] ethdev: refine TPID handling in flow API
Date: 19 Apr 2018 03:27:19 -0700 [thread overview]
Message-ID: <0590c7$1er3l4@orsmga001.jf.intel.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 9505 bytes --]
Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/38510
_apply issues_
Submitter: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Date: 2018-04-19 10:16:45
DPDK git baseline:
Repo:dpdk-master, CommitID: e62f3a8a04768352bc78389d499be50c923bf6aa
Repo:dpdk-next-eventdev, CommitID: fe5abd3150bc1caa8369e743c395c39f53265597
Repo:dpdk-next-net, CommitID: 9f44b612637c29752d1585e8d1af2e299756cd60
Repo:dpdk-next-crypto, CommitID: b1af489e6482a2247ef36418cee803e32bc84b2e
Repo:dpdk-next-virtio, CommitID: 8adbe7e4847060d091c46abcbecd3dfea8362b7a
*Repo: dpdk-master
Checking patch doc/guides/prog_guide/rte_flow.rst...
Checking patch doc/guides/testpmd_app_ug/testpmd_funcs.rst...
Checking patch drivers/net/bnxt/bnxt_filter.c...
Hunk #1 succeeded at 298 (offset -9 lines).
Hunk #2 succeeded at 308 (offset -9 lines).
error: while searching for:
if (eth_mask->type) {
filter->ethertype =
rte_be_to_cpu_16(eth_spec->type);
en |= use_ntuple ?
NTUPLE_FLTR_ALLOC_INPUT_EN_ETHERTYPE :
--
filter->l2_ovlan =
rte_be_to_cpu_16(vlan_spec->tci &
RTE_BE16(0x0fff));
en |= EM_FLOW_ALLOC_INPUT_EN_OVLAN_VID;
} else if (vlan_mask->tci || vlan_mask->tpid) {
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
item,
"VLAN mask is invalid");
return -rte_errno;
}
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
error: patch failed: drivers/net/bnxt/bnxt_filter.c:385
error: drivers/net/bnxt/bnxt_filter.c: patch does not apply
Checking patch drivers/net/enic/enic_flow.c...
Hunk #1 succeeded at 556 (offset -1 lines).
Checking patch drivers/net/i40e/i40e_flow.c...
Checking patch drivers/net/ixgbe/ixgbe_ethdev.c...
Hunk #1 succeeded at 117 (offset 2 lines).
Hunk #2 succeeded at 1482 (offset 2 lines).
Checking patch drivers/net/mlx5/mlx5_flow.c...
error: while searching for:
#endif
#include <rte_common.h>
#include <rte_eth_ctrl.h>
#include <rte_ethdev_driver.h>
#include <rte_flow.h>
error: patch failed: drivers/net/mlx5/mlx5_flow.c:18
error: drivers/net/mlx5/mlx5_flow.c: patch does not apply
Checking patch drivers/net/mvpp2/mrvl_flow.c...
Checking patch drivers/net/sfc/sfc_flow.c...
Checking patch drivers/net/tap/tap_flow.c...
Checking patch lib/librte_ether/rte_flow.h...
Hunk #1 succeeded at 449 (offset -5 lines).
*Repo: dpdk-next-eventdev
Checking patch doc/guides/prog_guide/rte_flow.rst...
Checking patch doc/guides/testpmd_app_ug/testpmd_funcs.rst...
Checking patch drivers/net/bnxt/bnxt_filter.c...
Hunk #1 succeeded at 326 (offset 19 lines).
Hunk #2 succeeded at 336 (offset 19 lines).
error: while searching for:
if (eth_mask->type) {
filter->ethertype =
rte_be_to_cpu_16(eth_spec->type);
en |= use_ntuple ?
NTUPLE_FLTR_ALLOC_INPUT_EN_ETHERTYPE :
--
filter->l2_ovlan =
rte_be_to_cpu_16(vlan_spec->tci &
RTE_BE16(0x0fff));
en |= EM_FLOW_ALLOC_INPUT_EN_OVLAN_VID;
} else if (vlan_mask->tci || vlan_mask->tpid) {
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
item,
"VLAN mask is invalid");
return -rte_errno;
}
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
error: patch failed: drivers/net/bnxt/bnxt_filter.c:385
error: drivers/net/bnxt/bnxt_filter.c: patch does not apply
Checking patch drivers/net/enic/enic_flow.c...
Hunk #1 succeeded at 544 (offset -13 lines).
Checking patch drivers/net/i40e/i40e_flow.c...
Hunk #2 succeeded at 2491 (offset -1 lines).
Hunk #3 succeeded at 2516 (offset -1 lines).
--
Hunk #8 succeeded at 4063 (offset -1 lines).
Checking patch drivers/net/ixgbe/ixgbe_ethdev.c...
Hunk #1 succeeded at 117 (offset 2 lines).
Hunk #2 succeeded at 1482 (offset 2 lines).
Checking patch drivers/net/mlx5/mlx5_flow.c...
error: while searching for:
#endif
#include <rte_common.h>
#include <rte_eth_ctrl.h>
#include <rte_ethdev_driver.h>
#include <rte_flow.h>
error: patch failed: drivers/net/mlx5/mlx5_flow.c:18
error: drivers/net/mlx5/mlx5_flow.c: patch does not apply
Checking patch drivers/net/mvpp2/mrvl_flow.c...
Checking patch drivers/net/sfc/sfc_flow.c...
Checking patch drivers/net/tap/tap_flow.c...
Checking patch lib/librte_ether/rte_flow.h...
Hunk #1 succeeded at 449 (offset -5 lines).
*Repo: dpdk-next-net
Checking patch doc/guides/prog_guide/rte_flow.rst...
Checking patch doc/guides/testpmd_app_ug/testpmd_funcs.rst...
Checking patch drivers/net/bnxt/bnxt_filter.c...
Hunk #1 succeeded at 306 (offset -1 lines).
Hunk #2 succeeded at 316 (offset -1 lines).
error: while searching for:
if (eth_mask->type) {
filter->ethertype =
rte_be_to_cpu_16(eth_spec->type);
en |= use_ntuple ?
NTUPLE_FLTR_ALLOC_INPUT_EN_ETHERTYPE :
--
filter->l2_ovlan =
rte_be_to_cpu_16(vlan_spec->tci &
RTE_BE16(0x0fff));
en |= EM_FLOW_ALLOC_INPUT_EN_OVLAN_VID;
} else if (vlan_mask->tci || vlan_mask->tpid) {
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
item,
"VLAN mask is invalid");
return -rte_errno;
}
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
error: patch failed: drivers/net/bnxt/bnxt_filter.c:385
error: drivers/net/bnxt/bnxt_filter.c: patch does not apply
Checking patch drivers/net/enic/enic_flow.c...
Hunk #1 succeeded at 556 (offset -1 lines).
Checking patch drivers/net/i40e/i40e_flow.c...
Checking patch drivers/net/ixgbe/ixgbe_ethdev.c...
Hunk #1 succeeded at 117 (offset 2 lines).
Hunk #2 succeeded at 1482 (offset 2 lines).
Checking patch drivers/net/mlx5/mlx5_flow.c...
error: while searching for:
#endif
#include <rte_common.h>
#include <rte_eth_ctrl.h>
#include <rte_ethdev_driver.h>
#include <rte_flow.h>
error: patch failed: drivers/net/mlx5/mlx5_flow.c:18
error: drivers/net/mlx5/mlx5_flow.c: patch does not apply
Checking patch drivers/net/mvpp2/mrvl_flow.c...
Checking patch drivers/net/sfc/sfc_flow.c...
Checking patch drivers/net/tap/tap_flow.c...
Checking patch lib/librte_ether/rte_flow.h...
Hunk #1 succeeded at 449 (offset -5 lines).
*Repo: dpdk-next-crypto
Checking patch doc/guides/prog_guide/rte_flow.rst...
Checking patch doc/guides/testpmd_app_ug/testpmd_funcs.rst...
Checking patch drivers/net/bnxt/bnxt_filter.c...
Hunk #1 succeeded at 298 (offset -9 lines).
Hunk #2 succeeded at 308 (offset -9 lines).
error: while searching for:
if (eth_mask->type) {
filter->ethertype =
rte_be_to_cpu_16(eth_spec->type);
en |= use_ntuple ?
NTUPLE_FLTR_ALLOC_INPUT_EN_ETHERTYPE :
--
filter->l2_ovlan =
rte_be_to_cpu_16(vlan_spec->tci &
RTE_BE16(0x0fff));
en |= EM_FLOW_ALLOC_INPUT_EN_OVLAN_VID;
} else if (vlan_mask->tci || vlan_mask->tpid) {
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
item,
"VLAN mask is invalid");
return -rte_errno;
}
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
error: patch failed: drivers/net/bnxt/bnxt_filter.c:385
error: drivers/net/bnxt/bnxt_filter.c: patch does not apply
Checking patch drivers/net/enic/enic_flow.c...
Hunk #1 succeeded at 556 (offset -1 lines).
Checking patch drivers/net/i40e/i40e_flow.c...
Checking patch drivers/net/ixgbe/ixgbe_ethdev.c...
Hunk #1 succeeded at 117 (offset 2 lines).
Hunk #2 succeeded at 1482 (offset 2 lines).
Checking patch drivers/net/mlx5/mlx5_flow.c...
error: while searching for:
#endif
#include <rte_common.h>
#include <rte_eth_ctrl.h>
#include <rte_ethdev_driver.h>
#include <rte_flow.h>
error: patch failed: drivers/net/mlx5/mlx5_flow.c:18
error: drivers/net/mlx5/mlx5_flow.c: patch does not apply
Checking patch drivers/net/mvpp2/mrvl_flow.c...
Checking patch drivers/net/sfc/sfc_flow.c...
Checking patch drivers/net/tap/tap_flow.c...
Checking patch lib/librte_ether/rte_flow.h...
Hunk #1 succeeded at 449 (offset -5 lines).
*Repo: dpdk-next-virtio
Checking patch doc/guides/prog_guide/rte_flow.rst...
Checking patch doc/guides/testpmd_app_ug/testpmd_funcs.rst...
Checking patch drivers/net/bnxt/bnxt_filter.c...
Hunk #1 succeeded at 298 (offset -9 lines).
Hunk #2 succeeded at 308 (offset -9 lines).
error: while searching for:
if (eth_mask->type) {
filter->ethertype =
rte_be_to_cpu_16(eth_spec->type);
en |= use_ntuple ?
NTUPLE_FLTR_ALLOC_INPUT_EN_ETHERTYPE :
--
filter->l2_ovlan =
rte_be_to_cpu_16(vlan_spec->tci &
RTE_BE16(0x0fff));
en |= EM_FLOW_ALLOC_INPUT_EN_OVLAN_VID;
} else if (vlan_mask->tci || vlan_mask->tpid) {
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
item,
"VLAN mask is invalid");
return -rte_errno;
}
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
error: patch failed: drivers/net/bnxt/bnxt_filter.c:385
error: drivers/net/bnxt/bnxt_filter.c: patch does not apply
Checking patch drivers/net/enic/enic_flow.c...
Hunk #1 succeeded at 556 (offset -1 lines).
Checking patch drivers/net/i40e/i40e_flow.c...
Checking patch drivers/net/ixgbe/ixgbe_ethdev.c...
Hunk #1 succeeded at 117 (offset 2 lines).
Hunk #2 succeeded at 1482 (offset 2 lines).
Checking patch drivers/net/mlx5/mlx5_flow.c...
error: while searching for:
#endif
#include <rte_common.h>
#include <rte_eth_ctrl.h>
#include <rte_ethdev_driver.h>
#include <rte_flow.h>
error: patch failed: drivers/net/mlx5/mlx5_flow.c:18
error: drivers/net/mlx5/mlx5_flow.c: patch does not apply
Checking patch drivers/net/mvpp2/mrvl_flow.c...
Checking patch drivers/net/sfc/sfc_flow.c...
Checking patch drivers/net/tap/tap_flow.c...
Checking patch lib/librte_ether/rte_flow.h...
Hunk #1 succeeded at 449 (offset -5 lines).
DPDK STV team
reply other threads:[~2018-04-19 10:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='0590c7$1er3l4@orsmga001.jf.intel.com' \
--to=sys_stv@intel.com \
--cc=test-report@dpdk.org \
--cc=xinfengx.zhao@intel.com \
--cc=zhaoyan.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).