automatic DPDK test reports
 help / color / mirror / Atom feed
From: sys_stv@intel.com
To: test-report@dpdk.org
Subject: [dpdk-test-report]  |FAILURE| pw35981[dpdk-dev, v2, 3/3] net/mlx5: fix link status to use wait to complete
Date: 10 May 2018 00:53:08 -0700	[thread overview]
Message-ID: <0590c7$1k571h@orsmga001.jf.intel.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 6965 bytes --]

Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/35981

_apply issues_

Submitter: Nlio Laranjeiro <nelio.laranjeiro@6wind.com>
Date: 2018-03-12 13:43:19
DPDK git baseline:
	Repo:dpdk-master, CommitID: 8ea41438832a360aed2b7ba49fb75e310a2ff1dc
	Repo:dpdk-next-eventdev, CommitID: 640b0d1e510e111694c25145466f37867453837f
	Repo:dpdk-next-net, CommitID: 774c1892c434dba09998ccc76b956feb72224571
	Repo:dpdk-next-crypto, CommitID: 728ca9b0d5abea82cd01dee6645456a9d56215f7
	Repo:dpdk-next-virtio, CommitID: 037c0996bc927342f157426739e0cb63f2db8689

*Repo: dpdk-master
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
	/* Device properties. */
	uint16_t mtu; /* Configured MTU. */
	uint8_t port; /* Physical port number. */
	unsigned int pending_alarm:1; /* An alarm is pending. */
	unsigned int isolated:1; /* Whether isolated mode is enabled. */
	/* RX/TX queues. */
	unsigned int rxqs_n; /* RX queues array size. */

error: patch failed: drivers/net/mlx5/mlx5.h:124
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_defs.h...
error: while searching for:
/* Supported RSS */
#define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP))

/* Maximum number of attempts to query link status before giving up. */
#define MLX5_MAX_LINK_QUERY_ATTEMPTS 5

/* Reserved address space for UAR mapping. */
#define MLX5_UAR_SIZE (1ULL << 32)

error: patch failed: drivers/net/mlx5/mlx5_defs.h:82
error: drivers/net/mlx5/mlx5_defs.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
error: while searching for:
#include <fcntl.h>
#include <stdalign.h>
#include <sys/un.h>

#include <rte_atomic.h>
#include <rte_ethdev_driver.h>

error: patch failed: drivers/net/mlx5/mlx5_ethdev.c:24
error: drivers/net/mlx5/mlx5_ethdev.c: patch does not apply
*Repo: dpdk-next-eventdev
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
	/* Device properties. */
	uint16_t mtu; /* Configured MTU. */
	uint8_t port; /* Physical port number. */
	unsigned int pending_alarm:1; /* An alarm is pending. */
	unsigned int isolated:1; /* Whether isolated mode is enabled. */
	/* RX/TX queues. */
	unsigned int rxqs_n; /* RX queues array size. */

error: patch failed: drivers/net/mlx5/mlx5.h:124
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_defs.h...
error: while searching for:
/* Supported RSS */
#define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP))

/* Maximum number of attempts to query link status before giving up. */
#define MLX5_MAX_LINK_QUERY_ATTEMPTS 5

/* Reserved address space for UAR mapping. */
#define MLX5_UAR_SIZE (1ULL << 32)

error: patch failed: drivers/net/mlx5/mlx5_defs.h:82
error: drivers/net/mlx5/mlx5_defs.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
error: while searching for:
#include <fcntl.h>
#include <stdalign.h>
#include <sys/un.h>

#include <rte_atomic.h>
#include <rte_ethdev_driver.h>

error: patch failed: drivers/net/mlx5/mlx5_ethdev.c:24
error: drivers/net/mlx5/mlx5_ethdev.c: patch does not apply
*Repo: dpdk-next-net
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
	/* Device properties. */
	uint16_t mtu; /* Configured MTU. */
	uint8_t port; /* Physical port number. */
	unsigned int pending_alarm:1; /* An alarm is pending. */
	unsigned int isolated:1; /* Whether isolated mode is enabled. */
	/* RX/TX queues. */
	unsigned int rxqs_n; /* RX queues array size. */

error: patch failed: drivers/net/mlx5/mlx5.h:124
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_defs.h...
error: while searching for:
/* Supported RSS */
#define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP))

/* Maximum number of attempts to query link status before giving up. */
#define MLX5_MAX_LINK_QUERY_ATTEMPTS 5

/* Reserved address space for UAR mapping. */
#define MLX5_UAR_SIZE (1ULL << 32)

error: patch failed: drivers/net/mlx5/mlx5_defs.h:82
error: drivers/net/mlx5/mlx5_defs.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
error: while searching for:
#include <fcntl.h>
#include <stdalign.h>
#include <sys/un.h>

#include <rte_atomic.h>
#include <rte_ethdev_driver.h>

error: patch failed: drivers/net/mlx5/mlx5_ethdev.c:24
error: drivers/net/mlx5/mlx5_ethdev.c: patch does not apply
*Repo: dpdk-next-crypto
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
	/* Device properties. */
	uint16_t mtu; /* Configured MTU. */
	uint8_t port; /* Physical port number. */
	unsigned int pending_alarm:1; /* An alarm is pending. */
	unsigned int isolated:1; /* Whether isolated mode is enabled. */
	/* RX/TX queues. */
	unsigned int rxqs_n; /* RX queues array size. */

error: patch failed: drivers/net/mlx5/mlx5.h:124
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_defs.h...
error: while searching for:
/* Supported RSS */
#define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP))

/* Maximum number of attempts to query link status before giving up. */
#define MLX5_MAX_LINK_QUERY_ATTEMPTS 5

/* Reserved address space for UAR mapping. */
#define MLX5_UAR_SIZE (1ULL << 32)

error: patch failed: drivers/net/mlx5/mlx5_defs.h:82
error: drivers/net/mlx5/mlx5_defs.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
error: while searching for:
#include <fcntl.h>
#include <stdalign.h>
#include <sys/un.h>

#include <rte_atomic.h>
#include <rte_ethdev_driver.h>

error: patch failed: drivers/net/mlx5/mlx5_ethdev.c:24
error: drivers/net/mlx5/mlx5_ethdev.c: patch does not apply
*Repo: dpdk-next-virtio
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
	/* Device properties. */
	uint16_t mtu; /* Configured MTU. */
	uint8_t port; /* Physical port number. */
	unsigned int pending_alarm:1; /* An alarm is pending. */
	unsigned int isolated:1; /* Whether isolated mode is enabled. */
	/* RX/TX queues. */
	unsigned int rxqs_n; /* RX queues array size. */

error: patch failed: drivers/net/mlx5/mlx5.h:124
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_defs.h...
error: while searching for:
/* Supported RSS */
#define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP))

/* Maximum number of attempts to query link status before giving up. */
#define MLX5_MAX_LINK_QUERY_ATTEMPTS 5

/* Reserved address space for UAR mapping. */
#define MLX5_UAR_SIZE (1ULL << 32)

error: patch failed: drivers/net/mlx5/mlx5_defs.h:82
error: drivers/net/mlx5/mlx5_defs.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
error: while searching for:
#include <fcntl.h>
#include <stdalign.h>
#include <sys/un.h>

#include <rte_atomic.h>
#include <rte_ethdev_driver.h>

error: patch failed: drivers/net/mlx5/mlx5_ethdev.c:24
error: drivers/net/mlx5/mlx5_ethdev.c: patch does not apply

DPDK STV team

                 reply	other threads:[~2018-05-10  7:53 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='0590c7$1k571h@orsmga001.jf.intel.com' \
    --to=sys_stv@intel.com \
    --cc=test-report@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).