* [dpdk-test-report] |FAILURE| pw36038[dpdk-dev, RESEND, v2, 3/7] net/dpaa2: change into dynamic logging
@ 2018-05-10 7:53 sys_stv
0 siblings, 0 replies; only message in thread
From: sys_stv @ 2018-05-10 7:53 UTC (permalink / raw)
To: test-report
[-- Attachment #1: Type: text/plain, Size: 15015 bytes --]
Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/36038
_apply issues_
Submitter: Shreyansh Jain <shreyansh.jain@nxp.com>
Date: 2018-03-13 05:44:27
DPDK git baseline:
Repo:dpdk-master, CommitID: 8ea41438832a360aed2b7ba49fb75e310a2ff1dc
Repo:dpdk-next-eventdev, CommitID: 640b0d1e510e111694c25145466f37867453837f
Repo:dpdk-next-net, CommitID: 774c1892c434dba09998ccc76b956feb72224571
Repo:dpdk-next-crypto, CommitID: 728ca9b0d5abea82cd01dee6645456a9d56215f7
Repo:dpdk-next-virtio, CommitID: 037c0996bc927342f157426739e0cb63f2db8689
*Repo: dpdk-master
Checking patch config/common_base...
error: while searching for:
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
--
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
#
# Compile burst-oriented Amazon ENA PMD driver
error: patch failed: config/common_base:188
error: config/common_base: patch does not apply
Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc...
error: while searching for:
#
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
#
# Compile burst-oriented NXP DPAA2 PMD driver
--
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:27
error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply
Checking patch doc/guides/nics/dpaa2.rst...
error: while searching for:
By default it is enabled only for defconfig_arm64-dpaa2-* config.
Toggle compilation of the ``librte_pmd_dpaa2`` driver.
- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)
--
Driver compilation and testing
------------------------------
error: patch failed: doc/guides/nics/dpaa2.rst:492
error: doc/guides/nics/dpaa2.rst: patch does not apply
Checking patch drivers/net/dpaa2/Makefile...
error: while searching for:
#
LIB = librte_pmd_dpaa2.a
ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
CFLAGS += -O0 -g
CFLAGS += "-Wno-error"
else
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
endif
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc
error: patch failed: drivers/net/dpaa2/Makefile:10
error: drivers/net/dpaa2/Makefile: patch does not apply
Checking patch drivers/net/dpaa2/base/dpaa2_hw_dpni.c...
error: while searching for:
#include <rte_kvargs.h>
#include <rte_dev.h>
#include <fslmc_logs.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>
error: patch failed: drivers/net/dpaa2/base/dpaa2_hw_dpni.c:17
error: drivers/net/dpaa2/base/dpaa2_hw_dpni.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_ethdev.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>
error: patch failed: drivers/net/dpaa2/dpaa2_ethdev.c:18
error: drivers/net/dpaa2/dpaa2_ethdev.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_pmd_logs.h...
error: drivers/net/dpaa2/dpaa2_pmd_logs.h: already exists in working directory
Checking patch drivers/net/dpaa2/dpaa2_rxtx.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
--
#include "dpaa2_ethdev.h"
#include "base/dpaa2_hw_dpni_annot.h"
error: patch failed: drivers/net/dpaa2/dpaa2_rxtx.c:16
error: drivers/net/dpaa2/dpaa2_rxtx.c: patch does not apply
*Repo: dpdk-next-eventdev
Checking patch config/common_base...
error: while searching for:
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
--
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
#
# Compile burst-oriented Amazon ENA PMD driver
error: patch failed: config/common_base:188
error: config/common_base: patch does not apply
Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc...
error: while searching for:
#
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
#
# Compile burst-oriented NXP DPAA2 PMD driver
--
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:27
error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply
Checking patch doc/guides/nics/dpaa2.rst...
error: while searching for:
By default it is enabled only for defconfig_arm64-dpaa2-* config.
Toggle compilation of the ``librte_pmd_dpaa2`` driver.
- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)
--
Driver compilation and testing
------------------------------
error: patch failed: doc/guides/nics/dpaa2.rst:492
error: doc/guides/nics/dpaa2.rst: patch does not apply
Checking patch drivers/net/dpaa2/Makefile...
error: while searching for:
#
LIB = librte_pmd_dpaa2.a
ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
CFLAGS += -O0 -g
CFLAGS += "-Wno-error"
else
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
endif
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc
error: patch failed: drivers/net/dpaa2/Makefile:10
error: drivers/net/dpaa2/Makefile: patch does not apply
Checking patch drivers/net/dpaa2/base/dpaa2_hw_dpni.c...
error: while searching for:
#include <rte_kvargs.h>
#include <rte_dev.h>
#include <fslmc_logs.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>
error: patch failed: drivers/net/dpaa2/base/dpaa2_hw_dpni.c:17
error: drivers/net/dpaa2/base/dpaa2_hw_dpni.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_ethdev.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>
error: patch failed: drivers/net/dpaa2/dpaa2_ethdev.c:18
error: drivers/net/dpaa2/dpaa2_ethdev.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_pmd_logs.h...
error: drivers/net/dpaa2/dpaa2_pmd_logs.h: already exists in working directory
Checking patch drivers/net/dpaa2/dpaa2_rxtx.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
--
#include "dpaa2_ethdev.h"
#include "base/dpaa2_hw_dpni_annot.h"
error: patch failed: drivers/net/dpaa2/dpaa2_rxtx.c:16
error: drivers/net/dpaa2/dpaa2_rxtx.c: patch does not apply
*Repo: dpdk-next-net
Checking patch config/common_base...
error: while searching for:
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
--
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
#
# Compile burst-oriented Amazon ENA PMD driver
error: patch failed: config/common_base:188
error: config/common_base: patch does not apply
Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc...
error: while searching for:
#
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
#
# Compile burst-oriented NXP DPAA2 PMD driver
--
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:27
error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply
Checking patch doc/guides/nics/dpaa2.rst...
error: while searching for:
By default it is enabled only for defconfig_arm64-dpaa2-* config.
Toggle compilation of the ``librte_pmd_dpaa2`` driver.
- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)
--
Driver compilation and testing
------------------------------
error: patch failed: doc/guides/nics/dpaa2.rst:492
error: doc/guides/nics/dpaa2.rst: patch does not apply
Checking patch drivers/net/dpaa2/Makefile...
error: while searching for:
#
LIB = librte_pmd_dpaa2.a
ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
CFLAGS += -O0 -g
CFLAGS += "-Wno-error"
else
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
endif
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc
error: patch failed: drivers/net/dpaa2/Makefile:10
error: drivers/net/dpaa2/Makefile: patch does not apply
Checking patch drivers/net/dpaa2/base/dpaa2_hw_dpni.c...
error: while searching for:
#include <rte_kvargs.h>
#include <rte_dev.h>
#include <fslmc_logs.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>
error: patch failed: drivers/net/dpaa2/base/dpaa2_hw_dpni.c:17
error: drivers/net/dpaa2/base/dpaa2_hw_dpni.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_ethdev.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>
error: patch failed: drivers/net/dpaa2/dpaa2_ethdev.c:18
error: drivers/net/dpaa2/dpaa2_ethdev.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_pmd_logs.h...
error: drivers/net/dpaa2/dpaa2_pmd_logs.h: already exists in working directory
Checking patch drivers/net/dpaa2/dpaa2_rxtx.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
--
#include "dpaa2_ethdev.h"
#include "base/dpaa2_hw_dpni_annot.h"
error: patch failed: drivers/net/dpaa2/dpaa2_rxtx.c:16
error: drivers/net/dpaa2/dpaa2_rxtx.c: patch does not apply
*Repo: dpdk-next-crypto
Checking patch config/common_base...
error: while searching for:
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
--
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
#
# Compile burst-oriented Amazon ENA PMD driver
error: patch failed: config/common_base:188
error: config/common_base: patch does not apply
Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc...
error: while searching for:
#
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
#
# Compile burst-oriented NXP DPAA2 PMD driver
--
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:27
error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply
Checking patch doc/guides/nics/dpaa2.rst...
error: while searching for:
By default it is enabled only for defconfig_arm64-dpaa2-* config.
Toggle compilation of the ``librte_pmd_dpaa2`` driver.
- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)
--
Driver compilation and testing
------------------------------
error: patch failed: doc/guides/nics/dpaa2.rst:492
error: doc/guides/nics/dpaa2.rst: patch does not apply
Checking patch drivers/net/dpaa2/Makefile...
error: while searching for:
#
LIB = librte_pmd_dpaa2.a
ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
CFLAGS += -O0 -g
CFLAGS += "-Wno-error"
else
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
endif
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc
error: patch failed: drivers/net/dpaa2/Makefile:10
error: drivers/net/dpaa2/Makefile: patch does not apply
Checking patch drivers/net/dpaa2/base/dpaa2_hw_dpni.c...
error: while searching for:
#include <rte_kvargs.h>
#include <rte_dev.h>
#include <fslmc_logs.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>
error: patch failed: drivers/net/dpaa2/base/dpaa2_hw_dpni.c:17
error: drivers/net/dpaa2/base/dpaa2_hw_dpni.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_ethdev.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>
error: patch failed: drivers/net/dpaa2/dpaa2_ethdev.c:18
error: drivers/net/dpaa2/dpaa2_ethdev.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_pmd_logs.h...
error: drivers/net/dpaa2/dpaa2_pmd_logs.h: already exists in working directory
Checking patch drivers/net/dpaa2/dpaa2_rxtx.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
--
#include "dpaa2_ethdev.h"
#include "base/dpaa2_hw_dpni_annot.h"
error: patch failed: drivers/net/dpaa2/dpaa2_rxtx.c:16
error: drivers/net/dpaa2/dpaa2_rxtx.c: patch does not apply
*Repo: dpdk-next-virtio
Checking patch config/common_base...
error: while searching for:
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
--
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
#
# Compile burst-oriented Amazon ENA PMD driver
error: patch failed: config/common_base:188
error: config/common_base: patch does not apply
Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc...
error: while searching for:
#
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n
#
# Compile burst-oriented NXP DPAA2 PMD driver
--
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:27
error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply
Checking patch doc/guides/nics/dpaa2.rst...
error: while searching for:
By default it is enabled only for defconfig_arm64-dpaa2-* config.
Toggle compilation of the ``librte_pmd_dpaa2`` driver.
- ``CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER`` (default ``n``)
--
Driver compilation and testing
------------------------------
error: patch failed: doc/guides/nics/dpaa2.rst:492
error: doc/guides/nics/dpaa2.rst: patch does not apply
Checking patch drivers/net/dpaa2/Makefile...
error: while searching for:
#
LIB = librte_pmd_dpaa2.a
ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
CFLAGS += -O0 -g
CFLAGS += "-Wno-error"
else
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
endif
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2
CFLAGS += -I$(RTE_SDK)/drivers/net/dpaa2/mc
CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc
error: patch failed: drivers/net/dpaa2/Makefile:10
error: drivers/net/dpaa2/Makefile: patch does not apply
Checking patch drivers/net/dpaa2/base/dpaa2_hw_dpni.c...
error: while searching for:
#include <rte_kvargs.h>
#include <rte_dev.h>
#include <fslmc_logs.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>
error: patch failed: drivers/net/dpaa2/base/dpaa2_hw_dpni.c:17
error: drivers/net/dpaa2/base/dpaa2_hw_dpni.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_ethdev.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
#include <dpaa2_hw_pvt.h>
#include <dpaa2_hw_mempool.h>
error: patch failed: drivers/net/dpaa2/dpaa2_ethdev.c:18
error: drivers/net/dpaa2/dpaa2_ethdev.c: patch does not apply
Checking patch drivers/net/dpaa2/dpaa2_pmd_logs.h...
error: drivers/net/dpaa2/dpaa2_pmd_logs.h: already exists in working directory
Checking patch drivers/net/dpaa2/dpaa2_rxtx.c...
error: while searching for:
#include <rte_dev.h>
#include <rte_fslmc.h>
#include <fslmc_logs.h>
#include <fslmc_vfio.h>
--
#include "dpaa2_ethdev.h"
#include "base/dpaa2_hw_dpni_annot.h"
error: patch failed: drivers/net/dpaa2/dpaa2_rxtx.c:16
error: drivers/net/dpaa2/dpaa2_rxtx.c: patch does not apply
DPDK STV team
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-05-10 7:53 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-10 7:53 [dpdk-test-report] |FAILURE| pw36038[dpdk-dev, RESEND, v2, 3/7] net/dpaa2: change into dynamic logging sys_stv
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).