Test-Label: Intel-compilation Test-Status: FAILURE http://dpdk.org/patch/36042 _apply issues_ Submitter: Shreyansh Jain Date: 2018-03-13 05:44:31 DPDK git baseline: Repo:dpdk-master, CommitID: 8ea41438832a360aed2b7ba49fb75e310a2ff1dc Repo:dpdk-next-eventdev, CommitID: 640b0d1e510e111694c25145466f37867453837f Repo:dpdk-next-net, CommitID: 774c1892c434dba09998ccc76b956feb72224571 Repo:dpdk-next-crypto, CommitID: 728ca9b0d5abea82cd01dee6645456a9d56215f7 Repo:dpdk-next-virtio, CommitID: 037c0996bc927342f157426739e0cb63f2db8689 *Repo: dpdk-master Checking patch config/common_base... error: while searching for: # Compile NXP DPAA2 crypto sec driver for CAAM HW # CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n # # NXP DPAA caam - crypto driver error: patch failed: config/common_base:450 error: config/common_base: patch does not apply Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc... error: while searching for: # Compile Support Libraries for DPAA2 # CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n # -- # CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:26 error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply Checking patch doc/guides/cryptodevs/dpaa2_sec.rst... error: while searching for: By default it is only enabled in defconfig_arm64-dpaa2-* config. Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver. * ``CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT`` (default ``n``) Toggle display of initialization related driver messages -- * ``CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS`` By default it is set as 2048 in defconfig_arm64-dpaa2-* config. It indicates Number of sessions to create in the session memory pool error: patch failed: doc/guides/cryptodevs/dpaa2_sec.rst:189 error: doc/guides/cryptodevs/dpaa2_sec.rst: patch does not apply Checking patch drivers/crypto/dpaa2_sec/Makefile... error: while searching for: # build flags CFLAGS += -DALLOW_EXPERIMENTAL_API ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT),y) CFLAGS += -O0 -g CFLAGS += "-Wno-error" else CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) endif CFLAGS += -D _GNU_SOURCE ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) error: patch failed: drivers/crypto/dpaa2_sec/Makefile:18 error: drivers/crypto/dpaa2_sec/Makefile: patch does not apply Checking patch drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c... error: while searching for: static uint8_t cryptodev_driver_id; static inline int build_proto_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op, error: patch failed: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:56 error: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c: patch does not apply Checking patch drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h... error: while searching for: #ifndef _DPAA2_SEC_LOGS_H_ #define _DPAA2_SEC_LOGS_H_ #define PMD_INIT_LOG(level, fmt, args...) \ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args) -- #define PMD_DRV_LOG(level, fmt, args...) \ PMD_DRV_LOG_RAW(level, fmt "\n", ## args) #endif /* _DPAA2_SEC_LOGS_H_ */ error: patch failed: drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h:8 error: drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h: patch does not apply *Repo: dpdk-next-eventdev Checking patch config/common_base... error: while searching for: # Compile NXP DPAA2 crypto sec driver for CAAM HW # CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n # # NXP DPAA caam - crypto driver error: patch failed: config/common_base:450 error: config/common_base: patch does not apply Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc... error: while searching for: # Compile Support Libraries for DPAA2 # CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n # -- # CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:26 error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply Checking patch doc/guides/cryptodevs/dpaa2_sec.rst... error: while searching for: By default it is only enabled in defconfig_arm64-dpaa2-* config. Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver. * ``CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT`` (default ``n``) Toggle display of initialization related driver messages -- * ``CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS`` By default it is set as 2048 in defconfig_arm64-dpaa2-* config. It indicates Number of sessions to create in the session memory pool error: patch failed: doc/guides/cryptodevs/dpaa2_sec.rst:189 error: doc/guides/cryptodevs/dpaa2_sec.rst: patch does not apply Checking patch drivers/crypto/dpaa2_sec/Makefile... error: while searching for: # build flags CFLAGS += -DALLOW_EXPERIMENTAL_API ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT),y) CFLAGS += -O0 -g CFLAGS += "-Wno-error" else CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) endif CFLAGS += -D _GNU_SOURCE ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) error: patch failed: drivers/crypto/dpaa2_sec/Makefile:18 error: drivers/crypto/dpaa2_sec/Makefile: patch does not apply Checking patch drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c... error: while searching for: static uint8_t cryptodev_driver_id; static inline int build_proto_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op, error: patch failed: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:56 error: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c: patch does not apply Checking patch drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h... error: while searching for: #ifndef _DPAA2_SEC_LOGS_H_ #define _DPAA2_SEC_LOGS_H_ #define PMD_INIT_LOG(level, fmt, args...) \ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args) -- #define PMD_DRV_LOG(level, fmt, args...) \ PMD_DRV_LOG_RAW(level, fmt "\n", ## args) #endif /* _DPAA2_SEC_LOGS_H_ */ error: patch failed: drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h:8 error: drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h: patch does not apply *Repo: dpdk-next-net Checking patch config/common_base... error: while searching for: # Compile NXP DPAA2 crypto sec driver for CAAM HW # CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n # # NXP DPAA caam - crypto driver error: patch failed: config/common_base:450 error: config/common_base: patch does not apply Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc... error: while searching for: # Compile Support Libraries for DPAA2 # CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n # -- # CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:26 error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply Checking patch doc/guides/cryptodevs/dpaa2_sec.rst... error: while searching for: By default it is only enabled in defconfig_arm64-dpaa2-* config. Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver. * ``CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT`` (default ``n``) Toggle display of initialization related driver messages -- * ``CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS`` By default it is set as 2048 in defconfig_arm64-dpaa2-* config. It indicates Number of sessions to create in the session memory pool error: patch failed: doc/guides/cryptodevs/dpaa2_sec.rst:189 error: doc/guides/cryptodevs/dpaa2_sec.rst: patch does not apply Checking patch drivers/crypto/dpaa2_sec/Makefile... error: while searching for: # build flags CFLAGS += -DALLOW_EXPERIMENTAL_API ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT),y) CFLAGS += -O0 -g CFLAGS += "-Wno-error" else CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) endif CFLAGS += -D _GNU_SOURCE ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) error: patch failed: drivers/crypto/dpaa2_sec/Makefile:18 error: drivers/crypto/dpaa2_sec/Makefile: patch does not apply Checking patch drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c... error: while searching for: static uint8_t cryptodev_driver_id; static inline int build_proto_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op, error: patch failed: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:56 error: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c: patch does not apply Checking patch drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h... error: while searching for: #ifndef _DPAA2_SEC_LOGS_H_ #define _DPAA2_SEC_LOGS_H_ #define PMD_INIT_LOG(level, fmt, args...) \ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args) -- #define PMD_DRV_LOG(level, fmt, args...) \ PMD_DRV_LOG_RAW(level, fmt "\n", ## args) #endif /* _DPAA2_SEC_LOGS_H_ */ error: patch failed: drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h:8 error: drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h: patch does not apply *Repo: dpdk-next-crypto Checking patch config/common_base... error: while searching for: # Compile NXP DPAA2 crypto sec driver for CAAM HW # CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n # # NXP DPAA caam - crypto driver error: patch failed: config/common_base:450 error: config/common_base: patch does not apply Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc... error: while searching for: # Compile Support Libraries for DPAA2 # CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n # -- # CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:26 error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply Checking patch doc/guides/cryptodevs/dpaa2_sec.rst... error: while searching for: By default it is only enabled in defconfig_arm64-dpaa2-* config. Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver. * ``CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT`` (default ``n``) Toggle display of initialization related driver messages -- * ``CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS`` By default it is set as 2048 in defconfig_arm64-dpaa2-* config. It indicates Number of sessions to create in the session memory pool error: patch failed: doc/guides/cryptodevs/dpaa2_sec.rst:189 error: doc/guides/cryptodevs/dpaa2_sec.rst: patch does not apply Checking patch drivers/crypto/dpaa2_sec/Makefile... error: while searching for: # build flags CFLAGS += -DALLOW_EXPERIMENTAL_API ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT),y) CFLAGS += -O0 -g CFLAGS += "-Wno-error" else CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) endif CFLAGS += -D _GNU_SOURCE ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) error: patch failed: drivers/crypto/dpaa2_sec/Makefile:18 error: drivers/crypto/dpaa2_sec/Makefile: patch does not apply Checking patch drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c... error: while searching for: static uint8_t cryptodev_driver_id; static inline int build_proto_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op, error: patch failed: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:56 error: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c: patch does not apply Checking patch drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h... error: while searching for: #ifndef _DPAA2_SEC_LOGS_H_ #define _DPAA2_SEC_LOGS_H_ #define PMD_INIT_LOG(level, fmt, args...) \ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args) -- #define PMD_DRV_LOG(level, fmt, args...) \ PMD_DRV_LOG_RAW(level, fmt "\n", ## args) #endif /* _DPAA2_SEC_LOGS_H_ */ error: patch failed: drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h:8 error: drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h: patch does not apply *Repo: dpdk-next-virtio Checking patch config/common_base... error: while searching for: # Compile NXP DPAA2 crypto sec driver for CAAM HW # CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n # # NXP DPAA caam - crypto driver error: patch failed: config/common_base:450 error: config/common_base: patch does not apply Checking patch config/defconfig_arm64-dpaa2-linuxapp-gcc... error: while searching for: # Compile Support Libraries for DPAA2 # CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=n # -- # CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n error: patch failed: config/defconfig_arm64-dpaa2-linuxapp-gcc:26 error: config/defconfig_arm64-dpaa2-linuxapp-gcc: patch does not apply Checking patch doc/guides/cryptodevs/dpaa2_sec.rst... error: while searching for: By default it is only enabled in defconfig_arm64-dpaa2-* config. Toggle compilation of the ``librte_pmd_dpaa2_sec`` driver. * ``CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT`` (default ``n``) Toggle display of initialization related driver messages -- * ``CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS`` By default it is set as 2048 in defconfig_arm64-dpaa2-* config. It indicates Number of sessions to create in the session memory pool error: patch failed: doc/guides/cryptodevs/dpaa2_sec.rst:189 error: doc/guides/cryptodevs/dpaa2_sec.rst: patch does not apply Checking patch drivers/crypto/dpaa2_sec/Makefile... error: while searching for: # build flags CFLAGS += -DALLOW_EXPERIMENTAL_API ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT),y) CFLAGS += -O0 -g CFLAGS += "-Wno-error" else CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) endif CFLAGS += -D _GNU_SOURCE ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) error: patch failed: drivers/crypto/dpaa2_sec/Makefile:18 error: drivers/crypto/dpaa2_sec/Makefile: patch does not apply Checking patch drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c... error: while searching for: static uint8_t cryptodev_driver_id; static inline int build_proto_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op, error: patch failed: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:56 error: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c: patch does not apply Checking patch drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h... error: while searching for: #ifndef _DPAA2_SEC_LOGS_H_ #define _DPAA2_SEC_LOGS_H_ #define PMD_INIT_LOG(level, fmt, args...) \ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args) -- #define PMD_DRV_LOG(level, fmt, args...) \ PMD_DRV_LOG_RAW(level, fmt "\n", ## args) #endif /* _DPAA2_SEC_LOGS_H_ */ error: patch failed: drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h:8 error: drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h: patch does not apply DPDK STV team