automatic DPDK test reports
 help / color / mirror / Atom feed
From: sys_stv@intel.com
To: test-report@dpdk.org
Cc: xinfengx.zhao@intel.com, zhaoyan.chen@intel.com, peipeix.lu@intel.com
Subject: [dpdk-test-report]  |FAILURE| pw36380[dpdk-dev, v3, 1/3] net/mlx5: use Netlink to add/remove MAC addresses
Date: 10 May 2018 00:58:54 -0700	[thread overview]
Message-ID: <0590c7$1k588f@orsmga001.jf.intel.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 10865 bytes --]

Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/36380

_apply issues_

Submitter: Nlio Laranjeiro <nelio.laranjeiro@6wind.com>
Date: 2018-03-21 13:40:05
DPDK git baseline:
	Repo:dpdk-master, CommitID: 8ea41438832a360aed2b7ba49fb75e310a2ff1dc
	Repo:dpdk-next-eventdev, CommitID: 640b0d1e510e111694c25145466f37867453837f
	Repo:dpdk-next-net, CommitID: 774c1892c434dba09998ccc76b956feb72224571
	Repo:dpdk-next-crypto, CommitID: 728ca9b0d5abea82cd01dee6645456a9d56215f7
	Repo:dpdk-next-virtio, CommitID: 037c0996bc927342f157426739e0cb63f2db8689

*Repo: dpdk-master
Checking patch drivers/net/mlx5/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_mr.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_flow.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_socket.c

ifeq ($(CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS),y)
INSTALL-$(CONFIG_RTE_LIBRTE_MLX5_PMD)-lib += $(LIB_GLUE)

error: patch failed: drivers/net/mlx5/Makefile:59
error: drivers/net/mlx5/Makefile: patch does not apply
Checking patch drivers/net/mlx5/mlx5.c...
error: while searching for:
#include <errno.h>
#include <net/if.h>
#include <sys/mman.h>

/* Verbs header. */
/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */

error: patch failed: drivers/net/mlx5/mlx5.c:13
error: drivers/net/mlx5/mlx5.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
	unsigned int hw_vlan_strip:1; /* VLAN stripping is supported. */
	unsigned int hw_fcs_strip:1; /* FCS stripping is supported. */
	unsigned int hw_padding:1; /* End alignment padding is supported. */
	unsigned int mps:2; /* Multi-packet send supported mode. */
	unsigned int tunnel_en:1;
	/* Whether tunnel stateless offloads are supported. */

error: patch failed: drivers/net/mlx5/mlx5.h:78
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
Hunk #1 succeeded at 205 (offset 28 lines).
Checking patch drivers/net/mlx5/mlx5_mac.c...
error: while searching for:
void
mlx5_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
{
	assert(index < MLX5_MAX_MAC_ADDRESSES);
	memset(&dev->data->mac_addrs[index], 0, sizeof(struct ether_addr));
	if (!dev->data->promiscuous) {
		int ret = mlx5_traffic_restart(dev);

		if (ret)
			DRV_LOG(ERR, "port %u cannot remove mac address: %s",
				dev->data->port_id, strerror(rte_errno));

error: patch failed: drivers/net/mlx5/mlx5_mac.c:67
error: drivers/net/mlx5/mlx5_mac.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5_nl.c...
error: drivers/net/mlx5/mlx5_nl.c: already exists in working directory
*Repo: dpdk-next-eventdev
Checking patch drivers/net/mlx5/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_mr.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_flow.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_socket.c

ifeq ($(CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS),y)
INSTALL-$(CONFIG_RTE_LIBRTE_MLX5_PMD)-lib += $(LIB_GLUE)

error: patch failed: drivers/net/mlx5/Makefile:59
error: drivers/net/mlx5/Makefile: patch does not apply
Checking patch drivers/net/mlx5/mlx5.c...
error: while searching for:
#include <errno.h>
#include <net/if.h>
#include <sys/mman.h>

/* Verbs header. */
/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */

error: patch failed: drivers/net/mlx5/mlx5.c:13
error: drivers/net/mlx5/mlx5.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
	unsigned int hw_vlan_strip:1; /* VLAN stripping is supported. */
	unsigned int hw_fcs_strip:1; /* FCS stripping is supported. */
	unsigned int hw_padding:1; /* End alignment padding is supported. */
	unsigned int mps:2; /* Multi-packet send supported mode. */
	unsigned int tunnel_en:1;
	/* Whether tunnel stateless offloads are supported. */

error: patch failed: drivers/net/mlx5/mlx5.h:78
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
Hunk #1 succeeded at 205 (offset 28 lines).
Checking patch drivers/net/mlx5/mlx5_mac.c...
error: while searching for:
void
mlx5_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
{
	assert(index < MLX5_MAX_MAC_ADDRESSES);
	memset(&dev->data->mac_addrs[index], 0, sizeof(struct ether_addr));
	if (!dev->data->promiscuous) {
		int ret = mlx5_traffic_restart(dev);

		if (ret)
			DRV_LOG(ERR, "port %u cannot remove mac address: %s",
				dev->data->port_id, strerror(rte_errno));

error: patch failed: drivers/net/mlx5/mlx5_mac.c:67
error: drivers/net/mlx5/mlx5_mac.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5_nl.c...
error: drivers/net/mlx5/mlx5_nl.c: already exists in working directory
*Repo: dpdk-next-net
Checking patch drivers/net/mlx5/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_mr.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_flow.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_socket.c

ifeq ($(CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS),y)
INSTALL-$(CONFIG_RTE_LIBRTE_MLX5_PMD)-lib += $(LIB_GLUE)

error: patch failed: drivers/net/mlx5/Makefile:59
error: drivers/net/mlx5/Makefile: patch does not apply
Checking patch drivers/net/mlx5/mlx5.c...
error: while searching for:
#include <errno.h>
#include <net/if.h>
#include <sys/mman.h>

/* Verbs header. */
/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */

error: patch failed: drivers/net/mlx5/mlx5.c:13
error: drivers/net/mlx5/mlx5.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
	unsigned int hw_vlan_strip:1; /* VLAN stripping is supported. */
	unsigned int hw_fcs_strip:1; /* FCS stripping is supported. */
	unsigned int hw_padding:1; /* End alignment padding is supported. */
	unsigned int mps:2; /* Multi-packet send supported mode. */
	unsigned int tunnel_en:1;
	/* Whether tunnel stateless offloads are supported. */

error: patch failed: drivers/net/mlx5/mlx5.h:78
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
Hunk #1 succeeded at 205 (offset 28 lines).
Checking patch drivers/net/mlx5/mlx5_mac.c...
error: while searching for:
void
mlx5_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
{
	assert(index < MLX5_MAX_MAC_ADDRESSES);
	memset(&dev->data->mac_addrs[index], 0, sizeof(struct ether_addr));
	if (!dev->data->promiscuous) {
		int ret = mlx5_traffic_restart(dev);

		if (ret)
			DRV_LOG(ERR, "port %u cannot remove mac address: %s",
				dev->data->port_id, strerror(rte_errno));

error: patch failed: drivers/net/mlx5/mlx5_mac.c:67
error: drivers/net/mlx5/mlx5_mac.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5_nl.c...
error: drivers/net/mlx5/mlx5_nl.c: already exists in working directory
*Repo: dpdk-next-crypto
Checking patch drivers/net/mlx5/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_mr.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_flow.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_socket.c

ifeq ($(CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS),y)
INSTALL-$(CONFIG_RTE_LIBRTE_MLX5_PMD)-lib += $(LIB_GLUE)

error: patch failed: drivers/net/mlx5/Makefile:59
error: drivers/net/mlx5/Makefile: patch does not apply
Checking patch drivers/net/mlx5/mlx5.c...
error: while searching for:
#include <errno.h>
#include <net/if.h>
#include <sys/mman.h>

/* Verbs header. */
/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */

error: patch failed: drivers/net/mlx5/mlx5.c:13
error: drivers/net/mlx5/mlx5.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
	unsigned int hw_vlan_strip:1; /* VLAN stripping is supported. */
	unsigned int hw_fcs_strip:1; /* FCS stripping is supported. */
	unsigned int hw_padding:1; /* End alignment padding is supported. */
	unsigned int mps:2; /* Multi-packet send supported mode. */
	unsigned int tunnel_en:1;
	/* Whether tunnel stateless offloads are supported. */

error: patch failed: drivers/net/mlx5/mlx5.h:78
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
Hunk #1 succeeded at 205 (offset 28 lines).
Checking patch drivers/net/mlx5/mlx5_mac.c...
error: while searching for:
void
mlx5_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
{
	assert(index < MLX5_MAX_MAC_ADDRESSES);
	memset(&dev->data->mac_addrs[index], 0, sizeof(struct ether_addr));
	if (!dev->data->promiscuous) {
		int ret = mlx5_traffic_restart(dev);

		if (ret)
			DRV_LOG(ERR, "port %u cannot remove mac address: %s",
				dev->data->port_id, strerror(rte_errno));

error: patch failed: drivers/net/mlx5/mlx5_mac.c:67
error: drivers/net/mlx5/mlx5_mac.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5_nl.c...
error: drivers/net/mlx5/mlx5_nl.c: already exists in working directory
*Repo: dpdk-next-virtio
Checking patch drivers/net/mlx5/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_mr.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_flow.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_socket.c

ifeq ($(CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS),y)
INSTALL-$(CONFIG_RTE_LIBRTE_MLX5_PMD)-lib += $(LIB_GLUE)

error: patch failed: drivers/net/mlx5/Makefile:59
error: drivers/net/mlx5/Makefile: patch does not apply
Checking patch drivers/net/mlx5/mlx5.c...
error: while searching for:
#include <errno.h>
#include <net/if.h>
#include <sys/mman.h>

/* Verbs header. */
/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */

error: patch failed: drivers/net/mlx5/mlx5.c:13
error: drivers/net/mlx5/mlx5.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
	unsigned int hw_vlan_strip:1; /* VLAN stripping is supported. */
	unsigned int hw_fcs_strip:1; /* FCS stripping is supported. */
	unsigned int hw_padding:1; /* End alignment padding is supported. */
	unsigned int mps:2; /* Multi-packet send supported mode. */
	unsigned int tunnel_en:1;
	/* Whether tunnel stateless offloads are supported. */

error: patch failed: drivers/net/mlx5/mlx5.h:78
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
Hunk #1 succeeded at 205 (offset 28 lines).
Checking patch drivers/net/mlx5/mlx5_mac.c...
error: while searching for:
void
mlx5_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
{
	assert(index < MLX5_MAX_MAC_ADDRESSES);
	memset(&dev->data->mac_addrs[index], 0, sizeof(struct ether_addr));
	if (!dev->data->promiscuous) {
		int ret = mlx5_traffic_restart(dev);

		if (ret)
			DRV_LOG(ERR, "port %u cannot remove mac address: %s",
				dev->data->port_id, strerror(rte_errno));

error: patch failed: drivers/net/mlx5/mlx5_mac.c:67
error: drivers/net/mlx5/mlx5_mac.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5_nl.c...
error: drivers/net/mlx5/mlx5_nl.c: already exists in working directory

DPDK STV team

                 reply	other threads:[~2018-05-10  7:58 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='0590c7$1k588f@orsmga001.jf.intel.com' \
    --to=sys_stv@intel.com \
    --cc=peipeix.lu@intel.com \
    --cc=test-report@dpdk.org \
    --cc=xinfengx.zhao@intel.com \
    --cc=zhaoyan.chen@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).