* [dpdk-test-report] |FAILURE| pw39857[dpdk-dev, 2/5] crypto/qat: move to dynamic logging for non-dp trace
@ 2018-05-14 2:03 sys_stv
0 siblings, 0 replies; only message in thread
From: sys_stv @ 2018-05-14 2:03 UTC (permalink / raw)
To: test-report; +Cc: xinfengx.zhao, zhaoyan.chen, peipeix.lu
[-- Attachment #1: Type: text/plain, Size: 9181 bytes --]
Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/39857
_apply issues_
Submitter: Fiona Trahe <fiona.trahe@intel.com>
Date: 2018-05-11 11:31:45
DPDK git baseline:
Repo:dpdk-master, CommitID: b8b8b344cb44bea46ac1d2037e8e5f1e742319f6
Repo:dpdk-next-eventdev, CommitID: 3c955492b601d65402c02ac81dfdc7eeb62f23c9
Repo:dpdk-next-net, CommitID: dc33238da4be9cf69e44049cd44950fb4fe74e3b
Repo:dpdk-next-crypto, CommitID: e0d88a394e91f446234aa04d0f9e01c150b0d347
Repo:dpdk-next-virtio, CommitID: 037c0996bc927342f157426739e0cb63f2db8689
*Repo: dpdk-master
Checking patch config/common_base...
error: while searching for:
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
error: patch failed: config/common_base:484
error: config/common_base: patch does not apply
Checking patch drivers/crypto/qat/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_qp.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_session.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_common.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_asym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_comp_pmd.c
error: patch failed: drivers/crypto/qat/Makefile:26
error: drivers/crypto/qat/Makefile: patch does not apply
Checking patch drivers/crypto/qat/meson.build...
error: while searching for:
sources = files('qat_common.c',
'qat_qp.c',
'qat_device.c',
'qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c',
'qat_asym_pmd.c',
'qat_comp_pmd.c')
error: patch failed: drivers/crypto/qat/meson.build:8
error: drivers/crypto/qat/meson.build: patch does not apply
Checking patch drivers/crypto/qat/qat_logs.c...
Checking patch drivers/crypto/qat/qat_logs.h...
error: while searching for:
#ifndef _QAT_LOGS_H_
#define _QAT_LOGS_H_
#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER
#define PMD_DRV_LOG_RAW(level, fmt, args...) \
--
#define PMD_DRV_LOG(level, fmt, args...) \
PMD_DRV_LOG_RAW(level, fmt "\n", ## args)
#endif /* _QAT_LOGS_H_ */
error: patch failed: drivers/crypto/qat/qat_logs.h:5
error: drivers/crypto/qat/qat_logs.h: patch does not apply
*Repo: dpdk-next-eventdev
Checking patch config/common_base...
error: while searching for:
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
error: patch failed: config/common_base:484
error: config/common_base: patch does not apply
Checking patch drivers/crypto/qat/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_qp.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_session.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_common.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_asym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_comp_pmd.c
error: patch failed: drivers/crypto/qat/Makefile:26
error: drivers/crypto/qat/Makefile: patch does not apply
Checking patch drivers/crypto/qat/meson.build...
error: while searching for:
sources = files('qat_common.c',
'qat_qp.c',
'qat_device.c',
'qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c',
'qat_asym_pmd.c',
'qat_comp_pmd.c')
error: patch failed: drivers/crypto/qat/meson.build:8
error: drivers/crypto/qat/meson.build: patch does not apply
Checking patch drivers/crypto/qat/qat_logs.c...
Checking patch drivers/crypto/qat/qat_logs.h...
error: while searching for:
#ifndef _QAT_LOGS_H_
#define _QAT_LOGS_H_
#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER
#define PMD_DRV_LOG_RAW(level, fmt, args...) \
--
#define PMD_DRV_LOG(level, fmt, args...) \
PMD_DRV_LOG_RAW(level, fmt "\n", ## args)
#endif /* _QAT_LOGS_H_ */
error: patch failed: drivers/crypto/qat/qat_logs.h:5
error: drivers/crypto/qat/qat_logs.h: patch does not apply
*Repo: dpdk-next-net
Checking patch config/common_base...
error: while searching for:
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
error: patch failed: config/common_base:484
error: config/common_base: patch does not apply
Checking patch drivers/crypto/qat/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_qp.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_session.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_common.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_asym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_comp_pmd.c
error: patch failed: drivers/crypto/qat/Makefile:26
error: drivers/crypto/qat/Makefile: patch does not apply
Checking patch drivers/crypto/qat/meson.build...
error: while searching for:
sources = files('qat_common.c',
'qat_qp.c',
'qat_device.c',
'qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c',
'qat_asym_pmd.c',
'qat_comp_pmd.c')
error: patch failed: drivers/crypto/qat/meson.build:8
error: drivers/crypto/qat/meson.build: patch does not apply
Checking patch drivers/crypto/qat/qat_logs.c...
Checking patch drivers/crypto/qat/qat_logs.h...
error: while searching for:
#ifndef _QAT_LOGS_H_
#define _QAT_LOGS_H_
#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER
#define PMD_DRV_LOG_RAW(level, fmt, args...) \
--
#define PMD_DRV_LOG(level, fmt, args...) \
PMD_DRV_LOG_RAW(level, fmt "\n", ## args)
#endif /* _QAT_LOGS_H_ */
error: patch failed: drivers/crypto/qat/qat_logs.h:5
error: drivers/crypto/qat/qat_logs.h: patch does not apply
*Repo: dpdk-next-crypto
Checking patch config/common_base...
error: while searching for:
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
error: patch failed: config/common_base:484
error: config/common_base: patch does not apply
Checking patch drivers/crypto/qat/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_qp.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_session.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_common.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_asym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_comp_pmd.c
error: patch failed: drivers/crypto/qat/Makefile:26
error: drivers/crypto/qat/Makefile: patch does not apply
Checking patch drivers/crypto/qat/meson.build...
error: while searching for:
sources = files('qat_common.c',
'qat_qp.c',
'qat_device.c',
'qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c',
'qat_asym_pmd.c',
'qat_comp_pmd.c')
error: patch failed: drivers/crypto/qat/meson.build:8
error: drivers/crypto/qat/meson.build: patch does not apply
Checking patch drivers/crypto/qat/qat_logs.c...
Checking patch drivers/crypto/qat/qat_logs.h...
error: while searching for:
#ifndef _QAT_LOGS_H_
#define _QAT_LOGS_H_
#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER
#define PMD_DRV_LOG_RAW(level, fmt, args...) \
--
#define PMD_DRV_LOG(level, fmt, args...) \
PMD_DRV_LOG_RAW(level, fmt "\n", ## args)
#endif /* _QAT_LOGS_H_ */
error: patch failed: drivers/crypto/qat/qat_logs.h:5
error: drivers/crypto/qat/qat_logs.h: patch does not apply
*Repo: dpdk-next-virtio
Checking patch config/common_base...
error: while searching for:
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
error: patch failed: config/common_base:484
error: config/common_base: patch does not apply
Checking patch drivers/crypto/qat/Makefile...
error: while searching for:
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_qp.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_session.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_common.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_sym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_asym_pmd.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat_comp_pmd.c
error: patch failed: drivers/crypto/qat/Makefile:26
error: drivers/crypto/qat/Makefile: patch does not apply
Checking patch drivers/crypto/qat/meson.build...
error: while searching for:
sources = files('qat_common.c',
'qat_qp.c',
'qat_device.c',
'qat_sym_pmd.c', 'qat_sym.c', 'qat_sym_session.c',
'qat_asym_pmd.c',
'qat_comp_pmd.c')
error: patch failed: drivers/crypto/qat/meson.build:8
error: drivers/crypto/qat/meson.build: patch does not apply
Checking patch drivers/crypto/qat/qat_logs.c...
Checking patch drivers/crypto/qat/qat_logs.h...
error: while searching for:
#ifndef _QAT_LOGS_H_
#define _QAT_LOGS_H_
#ifdef RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER
#define PMD_DRV_LOG_RAW(level, fmt, args...) \
--
#define PMD_DRV_LOG(level, fmt, args...) \
PMD_DRV_LOG_RAW(level, fmt "\n", ## args)
#endif /* _QAT_LOGS_H_ */
error: patch failed: drivers/crypto/qat/qat_logs.h:5
error: drivers/crypto/qat/qat_logs.h: patch does not apply
DPDK STV team
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-05-14 2:03 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-14 2:03 [dpdk-test-report] |FAILURE| pw39857[dpdk-dev, 2/5] crypto/qat: move to dynamic logging for non-dp trace sys_stv
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).