* [dpdk-test-report] |FAILURE| pw37618[dpdk-dev, v2, 04/14] net/qede/base: upgrade FW to 8.33.12.0
@ 2018-07-05 8:39 sys_stv
0 siblings, 0 replies; only message in thread
From: sys_stv @ 2018-07-05 8:39 UTC (permalink / raw)
To: test-report
[-- Attachment #1: Type: text/plain, Size: 38137 bytes --]
Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/37618
_apply issues_
Submitter: Rasesh Mody <rasesh.mody@cavium.com>
Date: 2018-04-09 04:48:00
DPDK git baseline:
Repo:dpdk-master, CommitID: 05e0eee0001cb19671eb7e8d3dd68680a695fea2
Repo:dpdk-next-eventdev, CommitID: aa9cbfc8cd1cae3e91e4741edc2aaf3d08056a39
Repo:dpdk-next-net, CommitID: 0b8b92e38cd55c68e4dc49dd597f62327798ec74
Repo:dpdk-next-crypto, CommitID: a5203e08a5e9b6ee9ffbbf4c150b7776de833b08
Repo:dpdk-next-virtio, CommitID: 9b954f9c455a76304601deb88e2df1549dc9e09a
*Repo: dpdk-master
Checking patch drivers/net/qede/base/common_hsi.h...
error: while searching for:
/****************************************************************************/
#define FW_MAJOR_VERSION 8
#define FW_MINOR_VERSION 30
--
#define FW_ENGINEERING_VERSION 0
/***********************/
/* COMMON HW CONSTANTS */
error: patch failed: drivers/net/qede/base/common_hsi.h:96
error: drivers/net/qede/base/common_hsi.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_cxt.c...
error: while searching for:
}
}
void ecore_qm_init_pf(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt)
{
struct ecore_qm_info *qm_info = &p_hwfn->qm_info;
struct ecore_mcp_link_state *p_link;
error: patch failed: drivers/net/qede/base/ecore_cxt.c:1427
error: drivers/net/qede/base/ecore_cxt.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_cxt.h...
error: while searching for:
*
* @param p_hwfn
* @param p_ptt
*/
void ecore_qm_init_pf(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt);
/**
* @brief Reconfigures QM pf on the fly
error: patch failed: drivers/net/qede/base/ecore_cxt.h:107
error: drivers/net/qede/base/ecore_cxt.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_dev.c...
error: while searching for:
"pq overflow! pq %d, max pq %d\n", pq_idx, max_pq);
/* init pq params */
qm_info->qm_pq_params[pq_idx].vport_id = qm_info->start_vport +
qm_info->num_vports;
qm_info->qm_pq_params[pq_idx].tc_id = tc;
error: patch failed: drivers/net/qede/base/ecore_dev.c:721
error: drivers/net/qede/base/ecore_dev.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_common.h...
error: while searching for:
__le16 reserved16 /* physical_q2 */;
__le16 tx_bd_cons /* word3 */;
__le16 tx_bd_or_spq_prod /* word4 */;
__le16 word5 /* word5 */;
__le16 conn_dpi /* conn_dpi */;
u8 byte3 /* byte3 */;
u8 byte4 /* byte4 */;
error: patch failed: drivers/net/qede/base/ecore_hsi_common.h:381
error: drivers/net/qede/base/ecore_hsi_common.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_debug_tools.h...
error: while searching for:
DBG_GRC_PARAM_DUMP_CAU /* dump CAU memories (0/1) */,
DBG_GRC_PARAM_DUMP_QM /* dump QM memories (0/1) */,
DBG_GRC_PARAM_DUMP_MCP /* dump MCP memories (0/1) */,
DBG_GRC_PARAM_RESERVED /* reserved */,
DBG_GRC_PARAM_DUMP_CFC /* dump CFC memories (0/1) */,
DBG_GRC_PARAM_DUMP_IGU /* dump IGU memories (0/1) */,
DBG_GRC_PARAM_DUMP_BRB /* dump BRB memories (0/1) */,
error: patch failed: drivers/net/qede/base/ecore_hsi_debug_tools.h:960
error: drivers/net/qede/base/ecore_hsi_debug_tools.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_eth.h...
error: while searching for:
__le16 edpm_num_bds /* physical_q2 */;
__le16 tx_bd_cons /* word3 */;
__le16 tx_bd_prod /* word4 */;
__le16 tx_class /* word5 */;
__le16 conn_dpi /* conn_dpi */;
u8 byte3 /* byte3 */;
u8 byte4 /* byte4 */;
error: patch failed: drivers/net/qede/base/ecore_hsi_eth.h:346
error: drivers/net/qede/base/ecore_hsi_eth.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_init_func.h...
error: while searching for:
u8 wrr_group /* WRR group */;
/* Indicates if a rate limiter should be allocated for the PQ (0/1) */
u8 rl_valid;
};
error: patch failed: drivers/net/qede/base/ecore_hsi_init_func.h:114
error: drivers/net/qede/base/ecore_hsi_init_func.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_init_fw_funcs.c...
error: while searching for:
#define QM_RL_PERIOD_CLK_25M (25 * QM_RL_PERIOD)
/* RL increment value - rate is specified in mbps. the factor of 1.01 was
* added after seeing only 99% factor reached in a 25Gbps port with DPDK RFC
* 2544 test. In this scenario the PF RL was reducing the line rate to 99%
--
*/
#define QM_RL_INC_VAL(rate) \
OSAL_MAX_T(u32, (u32)(((rate ? rate : 100000) * QM_RL_PERIOD * 101) / \
(8 * 100)), 1)
error: patch failed: drivers/net/qede/base/ecore_init_fw_funcs.c:76
error: drivers/net/qede/base/ecore_init_fw_funcs.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_init_fw_funcs.h...
error: while searching for:
*
* @param p_hwfn
* @param p_ptt - ptt window used for writing the registers
* @param port_id - port ID
* @param pf_id - PF ID
* @param max_phys_tcs_per_port - max number of physical TCs per port in HW
* @param num_pf_cids - number of connections used by this PF
* @param num_vf_cids - number of connections used by VFs of this PF
* @param num_tids - number of tasks used by this PF
error: patch failed: drivers/net/qede/base/ecore_init_fw_funcs.h:61
error: drivers/net/qede/base/ecore_init_fw_funcs.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_iro_values.h...
error: while searching for:
/* YSTORM_FLOW_CONTROL_MODE_OFFSET */
{ 0x0, 0x0, 0x0, 0x0, 0x8},
/* TSTORM_PORT_STAT_OFFSET(port_id) */
{ 0x4cb0, 0x80, 0x0, 0x0, 0x80},
/* TSTORM_LL2_PORT_STAT_OFFSET(port_id) */
{ 0x6508, 0x20, 0x0, 0x0, 0x20},
/* USTORM_VF_PF_CHANNEL_READY_OFFSET(vf_id) */
{ 0xb00, 0x8, 0x0, 0x0, 0x4},
/* USTORM_FLR_FINAL_ACK_OFFSET(pf_id) */
error: patch failed: drivers/net/qede/base/ecore_iro_values.h:13
error: drivers/net/qede/base/ecore_iro_values.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_l2.c...
error: while searching for:
p_ramrod->flow_id_valid = 0;
p_ramrod->flow_id = 0;
p_ramrod->vport_id = abs_vport_id;
p_ramrod->filter_action = b_is_add ? GFT_ADD_FILTER
: GFT_DELETE_FILTER;
error: patch failed: drivers/net/qede/base/ecore_l2.c:2150
error: drivers/net/qede/base/ecore_l2.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_rt_defs.h...
error: while searching for:
#define QM_REG_MAXPQSIZETXSEL_63_RT_OFFSET 34082
#define QM_REG_BASEADDROTHERPQ_RT_OFFSET 34083
#define QM_REG_BASEADDROTHERPQ_RT_SIZE 128
#define QM_REG_AFULLQMBYPTHRPFWFQ_RT_OFFSET 34211
#define QM_REG_AFULLQMBYPTHRVPWFQ_RT_OFFSET 34212
--
#define RUNTIME_ARRAY_SIZE 41743
/* Init Callbacks */
#define DMAE_READY_CB 0
error: patch failed: drivers/net/qede/base/ecore_rt_defs.h:205
error: drivers/net/qede/base/ecore_rt_defs.h: patch does not apply
Checking patch drivers/net/qede/base/eth_common.h...
error: while searching for:
/* Number of etherType values configured by driver for control frame check */
#define ETH_CTL_FRAME_ETH_TYPE_NUM 4
/*
error: patch failed: drivers/net/qede/base/eth_common.h:119
error: drivers/net/qede/base/eth_common.h: patch does not apply
Checking patch drivers/net/qede/base/reg_addr.h...
error: while searching for:
#define MCP_REG_CPU_STATE_SOFT_HALTED (0x1 << 10)
#define PRS_REG_SEARCH_TENANT_ID 0x1f044cUL
#define PGLUE_B_REG_VF_BAR1_SIZE 0x2aae68UL
error: patch failed: drivers/net/qede/base/reg_addr.h:1222
error: drivers/net/qede/base/reg_addr.h: patch does not apply
Checking patch drivers/net/qede/qede_main.c...
error: while searching for:
char fw_file[PATH_MAX];
const char *QEDE_DEFAULT_FIRMWARE =
"/lib/firmware/qed/qed_init_values-8.30.12.0.bin";
static void
qed_update_pf_params(struct ecore_dev *edev, struct ecore_pf_params *params)
error: patch failed: drivers/net/qede/qede_main.c:19
error: drivers/net/qede/qede_main.c: patch does not apply
*Repo: dpdk-next-eventdev
Checking patch drivers/net/qede/base/common_hsi.h...
error: while searching for:
/****************************************************************************/
#define FW_MAJOR_VERSION 8
#define FW_MINOR_VERSION 30
--
#define FW_ENGINEERING_VERSION 0
/***********************/
/* COMMON HW CONSTANTS */
error: patch failed: drivers/net/qede/base/common_hsi.h:96
error: drivers/net/qede/base/common_hsi.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_cxt.c...
error: while searching for:
}
}
void ecore_qm_init_pf(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt)
{
struct ecore_qm_info *qm_info = &p_hwfn->qm_info;
struct ecore_mcp_link_state *p_link;
error: patch failed: drivers/net/qede/base/ecore_cxt.c:1427
error: drivers/net/qede/base/ecore_cxt.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_cxt.h...
error: while searching for:
*
* @param p_hwfn
* @param p_ptt
*/
void ecore_qm_init_pf(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt);
/**
* @brief Reconfigures QM pf on the fly
error: patch failed: drivers/net/qede/base/ecore_cxt.h:107
error: drivers/net/qede/base/ecore_cxt.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_dev.c...
error: while searching for:
"pq overflow! pq %d, max pq %d\n", pq_idx, max_pq);
/* init pq params */
qm_info->qm_pq_params[pq_idx].vport_id = qm_info->start_vport +
qm_info->num_vports;
qm_info->qm_pq_params[pq_idx].tc_id = tc;
error: patch failed: drivers/net/qede/base/ecore_dev.c:721
error: drivers/net/qede/base/ecore_dev.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_common.h...
error: while searching for:
__le16 reserved16 /* physical_q2 */;
__le16 tx_bd_cons /* word3 */;
__le16 tx_bd_or_spq_prod /* word4 */;
__le16 word5 /* word5 */;
__le16 conn_dpi /* conn_dpi */;
u8 byte3 /* byte3 */;
u8 byte4 /* byte4 */;
error: patch failed: drivers/net/qede/base/ecore_hsi_common.h:381
error: drivers/net/qede/base/ecore_hsi_common.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_debug_tools.h...
error: while searching for:
DBG_GRC_PARAM_DUMP_CAU /* dump CAU memories (0/1) */,
DBG_GRC_PARAM_DUMP_QM /* dump QM memories (0/1) */,
DBG_GRC_PARAM_DUMP_MCP /* dump MCP memories (0/1) */,
DBG_GRC_PARAM_RESERVED /* reserved */,
DBG_GRC_PARAM_DUMP_CFC /* dump CFC memories (0/1) */,
DBG_GRC_PARAM_DUMP_IGU /* dump IGU memories (0/1) */,
DBG_GRC_PARAM_DUMP_BRB /* dump BRB memories (0/1) */,
error: patch failed: drivers/net/qede/base/ecore_hsi_debug_tools.h:960
error: drivers/net/qede/base/ecore_hsi_debug_tools.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_eth.h...
error: while searching for:
__le16 edpm_num_bds /* physical_q2 */;
__le16 tx_bd_cons /* word3 */;
__le16 tx_bd_prod /* word4 */;
__le16 tx_class /* word5 */;
__le16 conn_dpi /* conn_dpi */;
u8 byte3 /* byte3 */;
u8 byte4 /* byte4 */;
error: patch failed: drivers/net/qede/base/ecore_hsi_eth.h:346
error: drivers/net/qede/base/ecore_hsi_eth.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_init_func.h...
error: while searching for:
u8 wrr_group /* WRR group */;
/* Indicates if a rate limiter should be allocated for the PQ (0/1) */
u8 rl_valid;
};
error: patch failed: drivers/net/qede/base/ecore_hsi_init_func.h:114
error: drivers/net/qede/base/ecore_hsi_init_func.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_init_fw_funcs.c...
error: while searching for:
#define QM_RL_PERIOD_CLK_25M (25 * QM_RL_PERIOD)
/* RL increment value - rate is specified in mbps. the factor of 1.01 was
* added after seeing only 99% factor reached in a 25Gbps port with DPDK RFC
* 2544 test. In this scenario the PF RL was reducing the line rate to 99%
--
*/
#define QM_RL_INC_VAL(rate) \
OSAL_MAX_T(u32, (u32)(((rate ? rate : 100000) * QM_RL_PERIOD * 101) / \
(8 * 100)), 1)
error: patch failed: drivers/net/qede/base/ecore_init_fw_funcs.c:76
error: drivers/net/qede/base/ecore_init_fw_funcs.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_init_fw_funcs.h...
error: while searching for:
*
* @param p_hwfn
* @param p_ptt - ptt window used for writing the registers
* @param port_id - port ID
* @param pf_id - PF ID
* @param max_phys_tcs_per_port - max number of physical TCs per port in HW
* @param num_pf_cids - number of connections used by this PF
* @param num_vf_cids - number of connections used by VFs of this PF
* @param num_tids - number of tasks used by this PF
error: patch failed: drivers/net/qede/base/ecore_init_fw_funcs.h:61
error: drivers/net/qede/base/ecore_init_fw_funcs.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_iro_values.h...
error: while searching for:
/* YSTORM_FLOW_CONTROL_MODE_OFFSET */
{ 0x0, 0x0, 0x0, 0x0, 0x8},
/* TSTORM_PORT_STAT_OFFSET(port_id) */
{ 0x4cb0, 0x80, 0x0, 0x0, 0x80},
/* TSTORM_LL2_PORT_STAT_OFFSET(port_id) */
{ 0x6508, 0x20, 0x0, 0x0, 0x20},
/* USTORM_VF_PF_CHANNEL_READY_OFFSET(vf_id) */
{ 0xb00, 0x8, 0x0, 0x0, 0x4},
/* USTORM_FLR_FINAL_ACK_OFFSET(pf_id) */
error: patch failed: drivers/net/qede/base/ecore_iro_values.h:13
error: drivers/net/qede/base/ecore_iro_values.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_l2.c...
error: while searching for:
p_ramrod->flow_id_valid = 0;
p_ramrod->flow_id = 0;
p_ramrod->vport_id = abs_vport_id;
p_ramrod->filter_action = b_is_add ? GFT_ADD_FILTER
: GFT_DELETE_FILTER;
error: patch failed: drivers/net/qede/base/ecore_l2.c:2150
error: drivers/net/qede/base/ecore_l2.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_rt_defs.h...
error: while searching for:
#define QM_REG_MAXPQSIZETXSEL_63_RT_OFFSET 34082
#define QM_REG_BASEADDROTHERPQ_RT_OFFSET 34083
#define QM_REG_BASEADDROTHERPQ_RT_SIZE 128
#define QM_REG_AFULLQMBYPTHRPFWFQ_RT_OFFSET 34211
#define QM_REG_AFULLQMBYPTHRVPWFQ_RT_OFFSET 34212
--
#define RUNTIME_ARRAY_SIZE 41743
/* Init Callbacks */
#define DMAE_READY_CB 0
error: patch failed: drivers/net/qede/base/ecore_rt_defs.h:205
error: drivers/net/qede/base/ecore_rt_defs.h: patch does not apply
Checking patch drivers/net/qede/base/eth_common.h...
error: while searching for:
/* Number of etherType values configured by driver for control frame check */
#define ETH_CTL_FRAME_ETH_TYPE_NUM 4
/*
error: patch failed: drivers/net/qede/base/eth_common.h:119
error: drivers/net/qede/base/eth_common.h: patch does not apply
Checking patch drivers/net/qede/base/reg_addr.h...
error: while searching for:
#define MCP_REG_CPU_STATE_SOFT_HALTED (0x1 << 10)
#define PRS_REG_SEARCH_TENANT_ID 0x1f044cUL
#define PGLUE_B_REG_VF_BAR1_SIZE 0x2aae68UL
error: patch failed: drivers/net/qede/base/reg_addr.h:1222
error: drivers/net/qede/base/reg_addr.h: patch does not apply
Checking patch drivers/net/qede/qede_main.c...
error: while searching for:
char fw_file[PATH_MAX];
const char *QEDE_DEFAULT_FIRMWARE =
"/lib/firmware/qed/qed_init_values-8.30.12.0.bin";
static void
qed_update_pf_params(struct ecore_dev *edev, struct ecore_pf_params *params)
error: patch failed: drivers/net/qede/qede_main.c:19
error: drivers/net/qede/qede_main.c: patch does not apply
*Repo: dpdk-next-net
Checking patch drivers/net/qede/base/common_hsi.h...
error: while searching for:
/****************************************************************************/
#define FW_MAJOR_VERSION 8
#define FW_MINOR_VERSION 30
--
#define FW_ENGINEERING_VERSION 0
/***********************/
/* COMMON HW CONSTANTS */
error: patch failed: drivers/net/qede/base/common_hsi.h:96
error: drivers/net/qede/base/common_hsi.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_cxt.c...
error: while searching for:
}
}
void ecore_qm_init_pf(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt)
{
struct ecore_qm_info *qm_info = &p_hwfn->qm_info;
struct ecore_mcp_link_state *p_link;
error: patch failed: drivers/net/qede/base/ecore_cxt.c:1427
error: drivers/net/qede/base/ecore_cxt.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_cxt.h...
error: while searching for:
*
* @param p_hwfn
* @param p_ptt
*/
void ecore_qm_init_pf(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt);
/**
* @brief Reconfigures QM pf on the fly
error: patch failed: drivers/net/qede/base/ecore_cxt.h:107
error: drivers/net/qede/base/ecore_cxt.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_dev.c...
error: while searching for:
"pq overflow! pq %d, max pq %d\n", pq_idx, max_pq);
/* init pq params */
qm_info->qm_pq_params[pq_idx].vport_id = qm_info->start_vport +
qm_info->num_vports;
qm_info->qm_pq_params[pq_idx].tc_id = tc;
error: patch failed: drivers/net/qede/base/ecore_dev.c:721
error: drivers/net/qede/base/ecore_dev.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_common.h...
error: while searching for:
__le16 reserved16 /* physical_q2 */;
__le16 tx_bd_cons /* word3 */;
__le16 tx_bd_or_spq_prod /* word4 */;
__le16 word5 /* word5 */;
__le16 conn_dpi /* conn_dpi */;
u8 byte3 /* byte3 */;
u8 byte4 /* byte4 */;
error: patch failed: drivers/net/qede/base/ecore_hsi_common.h:381
error: drivers/net/qede/base/ecore_hsi_common.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_debug_tools.h...
error: while searching for:
DBG_GRC_PARAM_DUMP_CAU /* dump CAU memories (0/1) */,
DBG_GRC_PARAM_DUMP_QM /* dump QM memories (0/1) */,
DBG_GRC_PARAM_DUMP_MCP /* dump MCP memories (0/1) */,
DBG_GRC_PARAM_RESERVED /* reserved */,
DBG_GRC_PARAM_DUMP_CFC /* dump CFC memories (0/1) */,
DBG_GRC_PARAM_DUMP_IGU /* dump IGU memories (0/1) */,
DBG_GRC_PARAM_DUMP_BRB /* dump BRB memories (0/1) */,
error: patch failed: drivers/net/qede/base/ecore_hsi_debug_tools.h:960
error: drivers/net/qede/base/ecore_hsi_debug_tools.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_eth.h...
error: while searching for:
__le16 edpm_num_bds /* physical_q2 */;
__le16 tx_bd_cons /* word3 */;
__le16 tx_bd_prod /* word4 */;
__le16 tx_class /* word5 */;
__le16 conn_dpi /* conn_dpi */;
u8 byte3 /* byte3 */;
u8 byte4 /* byte4 */;
error: patch failed: drivers/net/qede/base/ecore_hsi_eth.h:346
error: drivers/net/qede/base/ecore_hsi_eth.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_init_func.h...
error: while searching for:
u8 wrr_group /* WRR group */;
/* Indicates if a rate limiter should be allocated for the PQ (0/1) */
u8 rl_valid;
};
error: patch failed: drivers/net/qede/base/ecore_hsi_init_func.h:114
error: drivers/net/qede/base/ecore_hsi_init_func.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_init_fw_funcs.c...
error: while searching for:
#define QM_RL_PERIOD_CLK_25M (25 * QM_RL_PERIOD)
/* RL increment value - rate is specified in mbps. the factor of 1.01 was
* added after seeing only 99% factor reached in a 25Gbps port with DPDK RFC
* 2544 test. In this scenario the PF RL was reducing the line rate to 99%
--
*/
#define QM_RL_INC_VAL(rate) \
OSAL_MAX_T(u32, (u32)(((rate ? rate : 100000) * QM_RL_PERIOD * 101) / \
(8 * 100)), 1)
error: patch failed: drivers/net/qede/base/ecore_init_fw_funcs.c:76
error: drivers/net/qede/base/ecore_init_fw_funcs.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_init_fw_funcs.h...
error: while searching for:
*
* @param p_hwfn
* @param p_ptt - ptt window used for writing the registers
* @param port_id - port ID
* @param pf_id - PF ID
* @param max_phys_tcs_per_port - max number of physical TCs per port in HW
* @param num_pf_cids - number of connections used by this PF
* @param num_vf_cids - number of connections used by VFs of this PF
* @param num_tids - number of tasks used by this PF
error: patch failed: drivers/net/qede/base/ecore_init_fw_funcs.h:61
error: drivers/net/qede/base/ecore_init_fw_funcs.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_iro_values.h...
error: while searching for:
/* YSTORM_FLOW_CONTROL_MODE_OFFSET */
{ 0x0, 0x0, 0x0, 0x0, 0x8},
/* TSTORM_PORT_STAT_OFFSET(port_id) */
{ 0x4cb0, 0x80, 0x0, 0x0, 0x80},
/* TSTORM_LL2_PORT_STAT_OFFSET(port_id) */
{ 0x6508, 0x20, 0x0, 0x0, 0x20},
/* USTORM_VF_PF_CHANNEL_READY_OFFSET(vf_id) */
{ 0xb00, 0x8, 0x0, 0x0, 0x4},
/* USTORM_FLR_FINAL_ACK_OFFSET(pf_id) */
error: patch failed: drivers/net/qede/base/ecore_iro_values.h:13
error: drivers/net/qede/base/ecore_iro_values.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_l2.c...
error: while searching for:
p_ramrod->flow_id_valid = 0;
p_ramrod->flow_id = 0;
p_ramrod->vport_id = abs_vport_id;
p_ramrod->filter_action = b_is_add ? GFT_ADD_FILTER
: GFT_DELETE_FILTER;
error: patch failed: drivers/net/qede/base/ecore_l2.c:2150
error: drivers/net/qede/base/ecore_l2.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_rt_defs.h...
error: while searching for:
#define QM_REG_MAXPQSIZETXSEL_63_RT_OFFSET 34082
#define QM_REG_BASEADDROTHERPQ_RT_OFFSET 34083
#define QM_REG_BASEADDROTHERPQ_RT_SIZE 128
#define QM_REG_AFULLQMBYPTHRPFWFQ_RT_OFFSET 34211
#define QM_REG_AFULLQMBYPTHRVPWFQ_RT_OFFSET 34212
--
#define RUNTIME_ARRAY_SIZE 41743
/* Init Callbacks */
#define DMAE_READY_CB 0
error: patch failed: drivers/net/qede/base/ecore_rt_defs.h:205
error: drivers/net/qede/base/ecore_rt_defs.h: patch does not apply
Checking patch drivers/net/qede/base/eth_common.h...
error: while searching for:
/* Number of etherType values configured by driver for control frame check */
#define ETH_CTL_FRAME_ETH_TYPE_NUM 4
/*
error: patch failed: drivers/net/qede/base/eth_common.h:119
error: drivers/net/qede/base/eth_common.h: patch does not apply
Checking patch drivers/net/qede/base/reg_addr.h...
error: while searching for:
#define MCP_REG_CPU_STATE_SOFT_HALTED (0x1 << 10)
#define PRS_REG_SEARCH_TENANT_ID 0x1f044cUL
#define PGLUE_B_REG_VF_BAR1_SIZE 0x2aae68UL
error: patch failed: drivers/net/qede/base/reg_addr.h:1222
error: drivers/net/qede/base/reg_addr.h: patch does not apply
Checking patch drivers/net/qede/qede_main.c...
error: while searching for:
char fw_file[PATH_MAX];
const char *QEDE_DEFAULT_FIRMWARE =
"/lib/firmware/qed/qed_init_values-8.30.12.0.bin";
static void
qed_update_pf_params(struct ecore_dev *edev, struct ecore_pf_params *params)
error: patch failed: drivers/net/qede/qede_main.c:19
error: drivers/net/qede/qede_main.c: patch does not apply
*Repo: dpdk-next-crypto
Checking patch drivers/net/qede/base/common_hsi.h...
error: while searching for:
/****************************************************************************/
#define FW_MAJOR_VERSION 8
#define FW_MINOR_VERSION 30
--
#define FW_ENGINEERING_VERSION 0
/***********************/
/* COMMON HW CONSTANTS */
error: patch failed: drivers/net/qede/base/common_hsi.h:96
error: drivers/net/qede/base/common_hsi.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_cxt.c...
error: while searching for:
}
}
void ecore_qm_init_pf(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt)
{
struct ecore_qm_info *qm_info = &p_hwfn->qm_info;
struct ecore_mcp_link_state *p_link;
error: patch failed: drivers/net/qede/base/ecore_cxt.c:1427
error: drivers/net/qede/base/ecore_cxt.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_cxt.h...
error: while searching for:
*
* @param p_hwfn
* @param p_ptt
*/
void ecore_qm_init_pf(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt);
/**
* @brief Reconfigures QM pf on the fly
error: patch failed: drivers/net/qede/base/ecore_cxt.h:107
error: drivers/net/qede/base/ecore_cxt.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_dev.c...
error: while searching for:
"pq overflow! pq %d, max pq %d\n", pq_idx, max_pq);
/* init pq params */
qm_info->qm_pq_params[pq_idx].vport_id = qm_info->start_vport +
qm_info->num_vports;
qm_info->qm_pq_params[pq_idx].tc_id = tc;
error: patch failed: drivers/net/qede/base/ecore_dev.c:721
error: drivers/net/qede/base/ecore_dev.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_common.h...
error: while searching for:
__le16 reserved16 /* physical_q2 */;
__le16 tx_bd_cons /* word3 */;
__le16 tx_bd_or_spq_prod /* word4 */;
__le16 word5 /* word5 */;
__le16 conn_dpi /* conn_dpi */;
u8 byte3 /* byte3 */;
u8 byte4 /* byte4 */;
error: patch failed: drivers/net/qede/base/ecore_hsi_common.h:381
error: drivers/net/qede/base/ecore_hsi_common.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_debug_tools.h...
error: while searching for:
DBG_GRC_PARAM_DUMP_CAU /* dump CAU memories (0/1) */,
DBG_GRC_PARAM_DUMP_QM /* dump QM memories (0/1) */,
DBG_GRC_PARAM_DUMP_MCP /* dump MCP memories (0/1) */,
DBG_GRC_PARAM_RESERVED /* reserved */,
DBG_GRC_PARAM_DUMP_CFC /* dump CFC memories (0/1) */,
DBG_GRC_PARAM_DUMP_IGU /* dump IGU memories (0/1) */,
DBG_GRC_PARAM_DUMP_BRB /* dump BRB memories (0/1) */,
error: patch failed: drivers/net/qede/base/ecore_hsi_debug_tools.h:960
error: drivers/net/qede/base/ecore_hsi_debug_tools.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_eth.h...
error: while searching for:
__le16 edpm_num_bds /* physical_q2 */;
__le16 tx_bd_cons /* word3 */;
__le16 tx_bd_prod /* word4 */;
__le16 tx_class /* word5 */;
__le16 conn_dpi /* conn_dpi */;
u8 byte3 /* byte3 */;
u8 byte4 /* byte4 */;
error: patch failed: drivers/net/qede/base/ecore_hsi_eth.h:346
error: drivers/net/qede/base/ecore_hsi_eth.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_init_func.h...
error: while searching for:
u8 wrr_group /* WRR group */;
/* Indicates if a rate limiter should be allocated for the PQ (0/1) */
u8 rl_valid;
};
error: patch failed: drivers/net/qede/base/ecore_hsi_init_func.h:114
error: drivers/net/qede/base/ecore_hsi_init_func.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_init_fw_funcs.c...
error: while searching for:
#define QM_RL_PERIOD_CLK_25M (25 * QM_RL_PERIOD)
/* RL increment value - rate is specified in mbps. the factor of 1.01 was
* added after seeing only 99% factor reached in a 25Gbps port with DPDK RFC
* 2544 test. In this scenario the PF RL was reducing the line rate to 99%
--
*/
#define QM_RL_INC_VAL(rate) \
OSAL_MAX_T(u32, (u32)(((rate ? rate : 100000) * QM_RL_PERIOD * 101) / \
(8 * 100)), 1)
error: patch failed: drivers/net/qede/base/ecore_init_fw_funcs.c:76
error: drivers/net/qede/base/ecore_init_fw_funcs.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_init_fw_funcs.h...
error: while searching for:
*
* @param p_hwfn
* @param p_ptt - ptt window used for writing the registers
* @param port_id - port ID
* @param pf_id - PF ID
* @param max_phys_tcs_per_port - max number of physical TCs per port in HW
* @param num_pf_cids - number of connections used by this PF
* @param num_vf_cids - number of connections used by VFs of this PF
* @param num_tids - number of tasks used by this PF
error: patch failed: drivers/net/qede/base/ecore_init_fw_funcs.h:61
error: drivers/net/qede/base/ecore_init_fw_funcs.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_iro_values.h...
error: while searching for:
/* YSTORM_FLOW_CONTROL_MODE_OFFSET */
{ 0x0, 0x0, 0x0, 0x0, 0x8},
/* TSTORM_PORT_STAT_OFFSET(port_id) */
{ 0x4cb0, 0x80, 0x0, 0x0, 0x80},
/* TSTORM_LL2_PORT_STAT_OFFSET(port_id) */
{ 0x6508, 0x20, 0x0, 0x0, 0x20},
/* USTORM_VF_PF_CHANNEL_READY_OFFSET(vf_id) */
{ 0xb00, 0x8, 0x0, 0x0, 0x4},
/* USTORM_FLR_FINAL_ACK_OFFSET(pf_id) */
error: patch failed: drivers/net/qede/base/ecore_iro_values.h:13
error: drivers/net/qede/base/ecore_iro_values.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_l2.c...
error: while searching for:
p_ramrod->flow_id_valid = 0;
p_ramrod->flow_id = 0;
p_ramrod->vport_id = abs_vport_id;
p_ramrod->filter_action = b_is_add ? GFT_ADD_FILTER
: GFT_DELETE_FILTER;
error: patch failed: drivers/net/qede/base/ecore_l2.c:2150
error: drivers/net/qede/base/ecore_l2.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_rt_defs.h...
error: while searching for:
#define QM_REG_MAXPQSIZETXSEL_63_RT_OFFSET 34082
#define QM_REG_BASEADDROTHERPQ_RT_OFFSET 34083
#define QM_REG_BASEADDROTHERPQ_RT_SIZE 128
#define QM_REG_AFULLQMBYPTHRPFWFQ_RT_OFFSET 34211
#define QM_REG_AFULLQMBYPTHRVPWFQ_RT_OFFSET 34212
--
#define RUNTIME_ARRAY_SIZE 41743
/* Init Callbacks */
#define DMAE_READY_CB 0
error: patch failed: drivers/net/qede/base/ecore_rt_defs.h:205
error: drivers/net/qede/base/ecore_rt_defs.h: patch does not apply
Checking patch drivers/net/qede/base/eth_common.h...
error: while searching for:
/* Number of etherType values configured by driver for control frame check */
#define ETH_CTL_FRAME_ETH_TYPE_NUM 4
/*
error: patch failed: drivers/net/qede/base/eth_common.h:119
error: drivers/net/qede/base/eth_common.h: patch does not apply
Checking patch drivers/net/qede/base/reg_addr.h...
error: while searching for:
#define MCP_REG_CPU_STATE_SOFT_HALTED (0x1 << 10)
#define PRS_REG_SEARCH_TENANT_ID 0x1f044cUL
#define PGLUE_B_REG_VF_BAR1_SIZE 0x2aae68UL
error: patch failed: drivers/net/qede/base/reg_addr.h:1222
error: drivers/net/qede/base/reg_addr.h: patch does not apply
Checking patch drivers/net/qede/qede_main.c...
error: while searching for:
char fw_file[PATH_MAX];
const char *QEDE_DEFAULT_FIRMWARE =
"/lib/firmware/qed/qed_init_values-8.30.12.0.bin";
static void
qed_update_pf_params(struct ecore_dev *edev, struct ecore_pf_params *params)
error: patch failed: drivers/net/qede/qede_main.c:19
error: drivers/net/qede/qede_main.c: patch does not apply
*Repo: dpdk-next-virtio
Checking patch drivers/net/qede/base/common_hsi.h...
error: while searching for:
/****************************************************************************/
#define FW_MAJOR_VERSION 8
#define FW_MINOR_VERSION 30
--
#define FW_ENGINEERING_VERSION 0
/***********************/
/* COMMON HW CONSTANTS */
error: patch failed: drivers/net/qede/base/common_hsi.h:96
error: drivers/net/qede/base/common_hsi.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_cxt.c...
error: while searching for:
}
}
void ecore_qm_init_pf(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt)
{
struct ecore_qm_info *qm_info = &p_hwfn->qm_info;
struct ecore_mcp_link_state *p_link;
error: patch failed: drivers/net/qede/base/ecore_cxt.c:1427
error: drivers/net/qede/base/ecore_cxt.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_cxt.h...
error: while searching for:
*
* @param p_hwfn
* @param p_ptt
*/
void ecore_qm_init_pf(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt);
/**
* @brief Reconfigures QM pf on the fly
error: patch failed: drivers/net/qede/base/ecore_cxt.h:107
error: drivers/net/qede/base/ecore_cxt.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_dev.c...
error: while searching for:
"pq overflow! pq %d, max pq %d\n", pq_idx, max_pq);
/* init pq params */
qm_info->qm_pq_params[pq_idx].vport_id = qm_info->start_vport +
qm_info->num_vports;
qm_info->qm_pq_params[pq_idx].tc_id = tc;
error: patch failed: drivers/net/qede/base/ecore_dev.c:721
error: drivers/net/qede/base/ecore_dev.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_common.h...
error: while searching for:
__le16 reserved16 /* physical_q2 */;
__le16 tx_bd_cons /* word3 */;
__le16 tx_bd_or_spq_prod /* word4 */;
__le16 word5 /* word5 */;
__le16 conn_dpi /* conn_dpi */;
u8 byte3 /* byte3 */;
u8 byte4 /* byte4 */;
error: patch failed: drivers/net/qede/base/ecore_hsi_common.h:381
error: drivers/net/qede/base/ecore_hsi_common.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_debug_tools.h...
error: while searching for:
DBG_GRC_PARAM_DUMP_CAU /* dump CAU memories (0/1) */,
DBG_GRC_PARAM_DUMP_QM /* dump QM memories (0/1) */,
DBG_GRC_PARAM_DUMP_MCP /* dump MCP memories (0/1) */,
DBG_GRC_PARAM_RESERVED /* reserved */,
DBG_GRC_PARAM_DUMP_CFC /* dump CFC memories (0/1) */,
DBG_GRC_PARAM_DUMP_IGU /* dump IGU memories (0/1) */,
DBG_GRC_PARAM_DUMP_BRB /* dump BRB memories (0/1) */,
error: patch failed: drivers/net/qede/base/ecore_hsi_debug_tools.h:960
error: drivers/net/qede/base/ecore_hsi_debug_tools.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_eth.h...
error: while searching for:
__le16 edpm_num_bds /* physical_q2 */;
__le16 tx_bd_cons /* word3 */;
__le16 tx_bd_prod /* word4 */;
__le16 tx_class /* word5 */;
__le16 conn_dpi /* conn_dpi */;
u8 byte3 /* byte3 */;
u8 byte4 /* byte4 */;
error: patch failed: drivers/net/qede/base/ecore_hsi_eth.h:346
error: drivers/net/qede/base/ecore_hsi_eth.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_hsi_init_func.h...
error: while searching for:
u8 wrr_group /* WRR group */;
/* Indicates if a rate limiter should be allocated for the PQ (0/1) */
u8 rl_valid;
};
error: patch failed: drivers/net/qede/base/ecore_hsi_init_func.h:114
error: drivers/net/qede/base/ecore_hsi_init_func.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_init_fw_funcs.c...
error: while searching for:
#define QM_RL_PERIOD_CLK_25M (25 * QM_RL_PERIOD)
/* RL increment value - rate is specified in mbps. the factor of 1.01 was
* added after seeing only 99% factor reached in a 25Gbps port with DPDK RFC
* 2544 test. In this scenario the PF RL was reducing the line rate to 99%
--
*/
#define QM_RL_INC_VAL(rate) \
OSAL_MAX_T(u32, (u32)(((rate ? rate : 100000) * QM_RL_PERIOD * 101) / \
(8 * 100)), 1)
error: patch failed: drivers/net/qede/base/ecore_init_fw_funcs.c:76
error: drivers/net/qede/base/ecore_init_fw_funcs.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_init_fw_funcs.h...
error: while searching for:
*
* @param p_hwfn
* @param p_ptt - ptt window used for writing the registers
* @param port_id - port ID
* @param pf_id - PF ID
* @param max_phys_tcs_per_port - max number of physical TCs per port in HW
* @param num_pf_cids - number of connections used by this PF
* @param num_vf_cids - number of connections used by VFs of this PF
* @param num_tids - number of tasks used by this PF
error: patch failed: drivers/net/qede/base/ecore_init_fw_funcs.h:61
error: drivers/net/qede/base/ecore_init_fw_funcs.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_iro_values.h...
error: while searching for:
/* YSTORM_FLOW_CONTROL_MODE_OFFSET */
{ 0x0, 0x0, 0x0, 0x0, 0x8},
/* TSTORM_PORT_STAT_OFFSET(port_id) */
{ 0x4cb0, 0x80, 0x0, 0x0, 0x80},
/* TSTORM_LL2_PORT_STAT_OFFSET(port_id) */
{ 0x6508, 0x20, 0x0, 0x0, 0x20},
/* USTORM_VF_PF_CHANNEL_READY_OFFSET(vf_id) */
{ 0xb00, 0x8, 0x0, 0x0, 0x4},
/* USTORM_FLR_FINAL_ACK_OFFSET(pf_id) */
error: patch failed: drivers/net/qede/base/ecore_iro_values.h:13
error: drivers/net/qede/base/ecore_iro_values.h: patch does not apply
Checking patch drivers/net/qede/base/ecore_l2.c...
error: while searching for:
p_ramrod->flow_id_valid = 0;
p_ramrod->flow_id = 0;
p_ramrod->vport_id = abs_vport_id;
p_ramrod->filter_action = b_is_add ? GFT_ADD_FILTER
: GFT_DELETE_FILTER;
error: patch failed: drivers/net/qede/base/ecore_l2.c:2150
error: drivers/net/qede/base/ecore_l2.c: patch does not apply
Checking patch drivers/net/qede/base/ecore_rt_defs.h...
error: while searching for:
#define QM_REG_MAXPQSIZETXSEL_63_RT_OFFSET 34082
#define QM_REG_BASEADDROTHERPQ_RT_OFFSET 34083
#define QM_REG_BASEADDROTHERPQ_RT_SIZE 128
#define QM_REG_AFULLQMBYPTHRPFWFQ_RT_OFFSET 34211
#define QM_REG_AFULLQMBYPTHRVPWFQ_RT_OFFSET 34212
--
#define RUNTIME_ARRAY_SIZE 41743
/* Init Callbacks */
#define DMAE_READY_CB 0
error: patch failed: drivers/net/qede/base/ecore_rt_defs.h:205
error: drivers/net/qede/base/ecore_rt_defs.h: patch does not apply
Checking patch drivers/net/qede/base/eth_common.h...
error: while searching for:
/* Number of etherType values configured by driver for control frame check */
#define ETH_CTL_FRAME_ETH_TYPE_NUM 4
/*
error: patch failed: drivers/net/qede/base/eth_common.h:119
error: drivers/net/qede/base/eth_common.h: patch does not apply
Checking patch drivers/net/qede/base/reg_addr.h...
error: while searching for:
#define MCP_REG_CPU_STATE_SOFT_HALTED (0x1 << 10)
#define PRS_REG_SEARCH_TENANT_ID 0x1f044cUL
#define PGLUE_B_REG_VF_BAR1_SIZE 0x2aae68UL
error: patch failed: drivers/net/qede/base/reg_addr.h:1222
error: drivers/net/qede/base/reg_addr.h: patch does not apply
Checking patch drivers/net/qede/qede_main.c...
error: while searching for:
char fw_file[PATH_MAX];
const char *QEDE_DEFAULT_FIRMWARE =
"/lib/firmware/qed/qed_init_values-8.30.12.0.bin";
static void
qed_update_pf_params(struct ecore_dev *edev, struct ecore_pf_params *params)
error: patch failed: drivers/net/qede/qede_main.c:19
error: drivers/net/qede/qede_main.c: patch does not apply
DPDK STV team
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-07-05 8:39 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-05 8:39 [dpdk-test-report] |FAILURE| pw37618[dpdk-dev, v2, 04/14] net/qede/base: upgrade FW to 8.33.12.0 sys_stv
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).