* [dpdk-test-report] |WARNING| [PATCH 6/8] crypto/dpaa2_sec: add sec procssing functionality
[not found] <20161205125540.6419-7-akhil.goyal@nxp.com>
@ 2016-12-05 7:29 ` checkpatch
0 siblings, 0 replies; only message in thread
From: checkpatch @ 2016-12-05 7:29 UTC (permalink / raw)
To: test-report; +Cc: Akhil Goyal
Test-Label: checkpatch
Test-Status: WARNING
http://dpdk.org/patch/17677
_coding style issues_
WARNING:AVOID_EXTERNS: externs should be avoided in .c files
#194: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:70:
+extern struct dpaa2_bp_info bpid_info[MAX_BPID];
WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines
#235: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:111:
+ /* TODO we are using the first FLE entry to store Mbuf.
+ Currently we donot know which FLE has the mbuf stored.
WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#238: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:114:
+ We can have a better approach to use the inline Mbuf*/
WARNING:LONG_LINE: line over 90 characters
#301: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:177:
+ DPAA2_SET_FD_LEN(fd, (sym_op->auth.data.length + sym_op->cipher.iv.length));
WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines
#365: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:241:
+ /* TODO we are using the first FLE entry to store Mbuf.
+ Currently we donot know which FLE has the mbuf stored.
WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#368: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:244:
+ We can have a better approach to use the inline Mbuf*/
WARNING:LONG_LINE: line over 90 characters
#393: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:269:
+ DPAA2_SET_FLE_OFFSET(fle, sym_op->auth.data.offset + sym_op->m_src->data_off);
WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines
#449: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:325:
+ /* TODO we are using the first FLE entry to store Mbuf.
+ Currently we donot know which FLE has the mbuf stored.
WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#452: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:328:
+ We can have a better approach to use the inline Mbuf*/
WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines
#631: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:507:
+ /* TODO we are using the first FLE entry to store Mbuf.
+ Currently we donot know which FLE has the mbuf stored.
WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#634: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:510:
+ We can have a better approach to use the inline Mbuf*/
WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines
#707: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:583:
+ /* Receive the packets till Last Dequeue entry is found with
+ respect to the above issues PULL command.
WARNING:BLOCK_COMMENT_STYLE: Block comments should align the * on each line
#711: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:587:
+ /*Check if the previous issued command is completed.
+ *Also seems like the SWP is shared between the Ethernet Driver
WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#712: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:588:
+ *and the SEC driver.*/
WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#717: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:593:
+ * new token by QBMAN */
WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines
#721: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:597:
+ /* Check whether Last Pull command is Expired and
+ setting Condition for Loop termination */
WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#721: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:597:
+ setting Condition for Loop termination */
WARNING:LONG_LINE: line over 90 characters
#906: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:782:
+ memcpy(session->cipher_key.data, xform->cipher.key.data, xform->cipher.key.length);
WARNING:UNSPECIFIED_INT: Prefer 'unsigned int *' to bare use of 'unsigned *'
#1247: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:1123:
+ 0, (unsigned *)priv->flc_desc[0].desc,
WARNING:UNSPECIFIED_INT: Prefer 'unsigned int' to bare use of 'unsigned'
#1602: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h:46:
+ unsigned max_nb_queue_pairs;
WARNING:UNSPECIFIED_INT: Prefer 'unsigned int' to bare use of 'unsigned'
#1604: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h:48:
+ unsigned max_nb_sessions;
WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#1712: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h:156:
+ * be 0 if no truncation required */
WARNING:BLOCK_COMMENT_STYLE: Block comments should align the * on each line
#1712: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h:156:
+ uint8_t trunc_len; /*!< Length for output ICV, should
+ * be 0 if no truncation required */
WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#1723: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h:167:
+ * be 0 if no truncation required */
WARNING:BLOCK_COMMENT_STYLE: Block comments should align the * on each line
#1723: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h:167:
+ uint8_t trunc_len; /*!< Length for output ICV, should
+ * be 0 if no truncation required */
WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines
#1746: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h:190:
+/* struct nadk_ipsec_ctxt ipsec_ctxt;
+ struct nadk_pdcp_ctxt pdcp_ctxt;
WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#1747: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h:191:
+ struct nadk_null_sec_ctxt null_sec_ctxt;*/
CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'fd' may be better as '(fd)' to avoid precedence issues
#2081: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:143:
+#define DPAA2_SET_FD_IVP(fd) ((fd->simple.bpid_offset |= 0x00004000))
CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'fd' may be better as '(fd)' to avoid precedence issues
#2084: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:146:
+#define DPAA2_SET_FD_INTERNAL_JD(fd, len) fd->simple.frc = (0x80000000 | (len))
CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'fle' may be better as '(fle)' to avoid precedence issues
#2092: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:154:
+#define DPAA2_SET_FLE_INTERNAL_JD(fle, len) (fle->frc = (0x80000000 | (len)))
CHECK:MACRO_ARG_REUSE: Macro argument reuse 'fle' - possible side-effects?
#2093: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:155:
+#define DPAA2_GET_FLE_ADDR(fle) \
+ (uint64_t)((((uint64_t)(fle->addr_hi)) << 32) + fle->addr_lo)
CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'fle' may be better as '(fle)' to avoid precedence issues
#2093: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:155:
+#define DPAA2_GET_FLE_ADDR(fle) \
+ (uint64_t)((((uint64_t)(fle->addr_hi)) << 32) + fle->addr_lo)
CHECK:MACRO_ARG_REUSE: Macro argument reuse 'fle' - possible side-effects?
#2095: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:157:
+#define DPAA2_SET_FLE_ADDR(fle, addr) do { \
+ fle->addr_lo = lower_32_bits((uint64_t)addr); \
+ fle->addr_hi = upper_32_bits((uint64_t)addr); \
+} while (0)
CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'fle' may be better as '(fle)' to avoid precedence issues
#2095: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:157:
+#define DPAA2_SET_FLE_ADDR(fle, addr) do { \
+ fle->addr_lo = lower_32_bits((uint64_t)addr); \
+ fle->addr_hi = upper_32_bits((uint64_t)addr); \
+} while (0)
CHECK:MACRO_ARG_REUSE: Macro argument reuse 'addr' - possible side-effects?
#2095: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:157:
+#define DPAA2_SET_FLE_ADDR(fle, addr) do { \
+ fle->addr_lo = lower_32_bits((uint64_t)addr); \
+ fle->addr_hi = upper_32_bits((uint64_t)addr); \
+} while (0)
CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'fle' may be better as '(fle)' to avoid precedence issues
#2102: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:164:
+#define DPAA2_GET_FLE_BPID(fle, bpid) (fle->fin_bpid_offset & 0x000000ff)
CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'fle' may be better as '(fle)' to avoid precedence issues
#2103: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:165:
+#define DPAA2_SET_FLE_FIN(fle) (fle->fin_bpid_offset |= (uint64_t)1 << 31)
CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'fd' may be better as '(fd)' to avoid precedence issues
#2105: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:167:
+#define DPAA2_SET_FD_COMPOUND_FMT(fd) \
+ (fd->simple.bpid_offset |= (uint32_t)1 << 28)
CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'fd' may be better as '(fd)' to avoid precedence issues
#2112: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:174:
+#define DPAA2_GET_FD_IVP(fd) ((fd->simple.bpid_offset & 0x00004000) >> 14)
CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'fle' may be better as '(fle)' to avoid precedence issues
#2114: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:176:
+#define DPAA2_SET_FLE_SG_EXT(fle) (fle->fin_bpid_offset |= (uint64_t)1 << 29)
CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'fle' may be better as '(fle)' to avoid precedence issues
#2115: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:177:
+#define DPAA2_IS_SET_FLE_SG_EXT(fle) \
+ ((fle->fin_bpid_offset & ((uint64_t)1 << 29)) ? 1 : 0)
CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'op' may be better as '(op)' to avoid precedence issues
#2125: FILE: drivers/net/dpaa2/base/dpaa2_hw_pvt.h:232:
+#define DPAA2_OP_VADDR_TO_IOVA(op) (op->phys_addr)
total: 0 errors, 27 warnings, 15 checks, 1965 lines checked
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2016-12-05 7:29 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20161205125540.6419-7-akhil.goyal@nxp.com>
2016-12-05 7:29 ` [dpdk-test-report] |WARNING| [PATCH 6/8] crypto/dpaa2_sec: add sec procssing functionality checkpatch
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).