From: checkpatch@dpdk.org
To: test-report@dpdk.org
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Subject: [dpdk-test-report] |WARNING| pw39358 [PATCH 1/4] net/bnxt: update HWRM to version 1.9.2
Date: Thu, 3 May 2018 19:42:30 +0200 (CEST) [thread overview]
Message-ID: <20180503174230.837BB29D6@dpdk.org> (raw)
In-Reply-To: <20180503172358.94990-2-ajit.khaparde@broadcom.com>
Test-Label: checkpatch
Test-Status: WARNING
http://dpdk.org/patch/39358
_coding style issues_
WARNING:SPACING: space prohibited between function name and open parenthesis '('
#174: FILE: drivers/net/bnxt/bnxt_ring.c:86:
+ sizeof (struct hwrm_resp_hdr)) : 0;
WARNING:LONG_LINE_COMMENT: line over 90 characters
#1012: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:438:
+ /* Engine CKV - Get the current allocation status of keys provisioned in the key vault. */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#11070: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:5787:
+ /* This value indicates the type of OS. The values are based on CIM_OperatingSystem.mof file as published by the DMTF. */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#11826: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:6210:
+ /* This value indicates the type of OS. The values are based on CIM_OperatingSystem.mof file as published by the DMTF. */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#15856: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:9772:
+ * This flag should be ignored if FEC autonegotiation is not supported on this port.
WARNING:TYPO_SPELLING: 'correspoding' may be misspelled - perhaps 'corresponding'?
#16455: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:10371:
+ * # If the correspoding CoS mapping is not enabled, then this
WARNING:TYPO_SPELLING: 'correspoding' may be misspelled - perhaps 'corresponding'?
#16504: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:10420:
+ * # If the correspoding CoS mapping is not enabled, then this
WARNING:TYPO_SPELLING: 'correspoding' may be misspelled - perhaps 'corresponding'?
#16518: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:10434:
+ * # If the correspoding CoS mapping is not enabled, then this
WARNING:LONG_LINE: line over 90 characters
#19934: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:13850:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#19981: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:13897:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20056: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:13972:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20103: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:14019:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20178: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:14094:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20225: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:14141:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20300: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:14216:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20347: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:14263:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20422: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:14338:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20469: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:14385:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20544: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:14460:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20591: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:14507:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20666: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:14582:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20713: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:14629:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20788: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:14704:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#20835: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:14751:
+ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
WARNING:LONG_LINE: line over 90 characters
#25090: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:18425:
+ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR_DURING_INT \
WARNING:LONG_LINE_COMMENT: line over 90 characters
#29652: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:20725:
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#29782: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:20817:
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#29923: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:20908:
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#31345: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:21730:
+ /* Number of times, the ROCE cos queue PFC is disabled to avoid pause flood/burst */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#32593: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:22373:
+ /* The Directory Entry Type (valid values are defined in the bnxnvm_directory_type enum defined in the file bnxnvm_defs.h). */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#32603: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:22380:
+ /* The Directory Entry Extension flags (see BNX_DIR_EXT_* in the file bnxnvm_defs.h). */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#32605: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:22382:
+ /* Directory Entry Attribute flags (see BNX_DIR_ATTR_* in the file bnxnvm_defs.h). */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#32610: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:22385:
+ * Length of data to write, in bytes. May be less than or equal to the allocated size for the directory entry.
WARNING:LONG_LINE_COMMENT: line over 90 characters
#32611: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:22386:
+ * The data length stored in the directory entry will be updated to reflect this value once the write is complete.
WARNING:LONG_LINE_COMMENT: line over 90 characters
#32634: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:22399:
+ * The requested length of the allocated NVM for the item, in bytes. This value may be greater than or equal to the specified data length (dir_data_length).
WARNING:LONG_LINE_COMMENT: line over 90 characters
#32636: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:22401:
+ * The response will contain the actual allocated item length, which may be greater than the requested item length.
WARNING:TYPO_SPELLING: 'accomodate' may be misspelled - perhaps 'accommodate'?
#32637: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:22402:
+ * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accomodate
WARNING:LONG_LINE_COMMENT: line over 90 characters
#32637: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:22402:
+ * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accomodate
WARNING:LONG_LINE_COMMENT: line over 90 characters
#32638: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:22403:
+ * the potential future growth of an item (e.g. upgraded firmware with a size increase, log growth, expanded configuration data).
WARNING:LONG_LINE_COMMENT: line over 90 characters
#32685: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:22420:
+ * Length of the allocated NVM for the item, in bytes. The value may be greater than or equal to the specified data length or the requested item length.
WARNING:LONG_LINE_COMMENT: line over 90 characters
#32686: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:22421:
+ * The actual item length used when creating a new directory entry will be a multiple of an NVM block size.
WARNING:LONG_LINE_COMMENT: line over 90 characters
#32978: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:22612:
+ * Only valid if the directory entry is for embedded firmware stored in APE_BIN Format.
ERROR:MISSING_SIGN_OFF: Missing Signed-off-by: line(s)
total: 1 errors, 42 warnings, 0 checks, 33057 lines checked
parent reply other threads:[~2018-05-03 17:42 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <20180503172358.94990-2-ajit.khaparde@broadcom.com>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180503174230.837BB29D6@dpdk.org \
--to=checkpatch@dpdk.org \
--cc=ajit.khaparde@broadcom.com \
--cc=test-report@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).