From: dpdklab@iol.unh.edu
To: test-report@dpdk.org
Cc: dpdk-test-reports@iol.unh.edu
Subject: [dpdk-test-report] |FAILURE| pw58893 [PATCH] net/ixgbe: add security statistics
Date: Fri, 6 Sep 2019 14:05:09 -0400 (EDT) [thread overview]
Message-ID: <20190906180509.2A3FA6D55A@noxus.dpdklab.iol.unh.edu> (raw)
[-- Attachment #1: Type: text/plain, Size: 10573 bytes --]
Test-Label: Performance-Testing
Test-Status: FAILURE
http://dpdk.org/patch/58893
_build patch failure_
Submitter: Radu Nicolau <radu.nicolau@intel.com>
Date: Friday, September 06 2019 16:41:56
Applied on: CommitID:1f0bc65bc0dbd722fee9a7233a7ec2e1d49da97d
Apply patch set 58893 failed:
Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
== Build lib/librte_eal
== Build lib/librte_eal/common
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_mempool
== Build lib/librte_mbuf
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_net
== Build lib/librte_cmdline
== Build lib/librte_meter
== Build lib/librte_ethdev
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_security
== Build lib/librte_compressdev
== Build lib/librte_hash
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_efd
== Build lib/librte_lpm
== Build lib/librte_acl
== Build lib/librte_member
== Build lib/librte_ip_frag
== Build lib/librte_gro
== Build lib/librte_jobstats
== Build lib/librte_metrics
== Build lib/librte_bitratestats
== Build lib/librte_latencystats
== Build lib/librte_power
== Build lib/librte_sched
== Build lib/librte_kni
== Build lib/librte_port
== Build lib/librte_table
== Build lib/librte_flow_classify
== Build lib/librte_distributor
== Build lib/librte_pipeline
== Build lib/librte_reorder
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
== Build lib/librte_ipsec
== Build lib/librte_rcu
== Build buildtools
== Build buildtools/pmdinfogen
== Build kernel
== Build kernel/linux
== Build kernel/linux/igb_uio
Building modules, stage 2.
MODPOST 1 modules
== Build kernel/linux/kni
Building modules, stage 2.
MODPOST 1 modules
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
== Build drivers/bus
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
== Build drivers/net
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/net/atlantic
== Build drivers/net/avp
== Build drivers/net/axgbe
== Build drivers/net/bonding
== Build drivers/net/cxgbe
== Build drivers/net/dpaa
== Build drivers/net/dpaa2
== Build drivers/net/e1000
== Build drivers/net/ena
== Build drivers/net/enetc
== Build drivers/net/enic
== Build drivers/net/failsafe
== Build drivers/net/fm10k
== Build drivers/net/hinic
== Build drivers/net/i40e
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
== Build drivers/net/ixgbe
CC ixgbe_ipsec.o
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c: In function ‘ixgbe_crypto_create_session’:
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:450:25: error: ‘struct rte_security_ipsec_sa_options’ has no member named ‘stats’
if (conf->ipsec.options.stats) {
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c: In function ‘ixgbe_crypto_stats_get’:
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:477:14: error: ‘struct rte_security_ipsec_stats’ has no member named ‘ipackets’
stats->ipsec.ipackets = ixgbe_stats->ipackets;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:477:37: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘ipackets’
stats->ipsec.ipackets = ixgbe_stats->ipackets;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:478:14: error: ‘struct rte_security_ipsec_stats’ has no member named ‘opackets’
stats->ipsec.opackets = ixgbe_stats->opackets;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:478:37: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘opackets’
stats->ipsec.opackets = ixgbe_stats->opackets;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:479:14: error: ‘struct rte_security_ipsec_stats’ has no member named ‘ibytes’
stats->ipsec.ibytes = ixgbe_stats->ibytes;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:479:35: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘ibytes’
stats->ipsec.ibytes = ixgbe_stats->ibytes;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:480:14: error: ‘struct rte_security_ipsec_stats’ has no member named ‘obytes’
stats->ipsec.obytes = ixgbe_stats->obytes;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:480:35: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘obytes’
stats->ipsec.obytes = ixgbe_stats->obytes;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:481:14: error: ‘struct rte_security_ipsec_stats’ has no member named ‘ierrors’
stats->ipsec.ierrors = ixgbe_stats->ierrors;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:481:36: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘ierrors’
stats->ipsec.ierrors = ixgbe_stats->ierrors;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:482:14: error: ‘struct rte_security_ipsec_stats’ has no member named ‘oerrors’
stats->ipsec.oerrors = ixgbe_stats->oerrors;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:482:36: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘oerrors’
stats->ipsec.oerrors = ixgbe_stats->oerrors;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c: In function ‘ixgbe_crypto_update_session’:
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:541:55: error: ‘struct rte_security_ipsec_sa_options’ has no member named ‘stats’
if (ic_session->stats_enabled && !conf->ipsec.options.stats) {
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:545:62: error: ‘struct rte_security_ipsec_sa_options’ has no member named ‘stats’
} else if (!ic_session->stats_enabled && conf->ipsec.options.stats) {
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c: In function ‘ixgbe_crypto_update_rx_stats’:
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:861:17: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘ierrors’
sess->stats.ierrors++;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:865:17: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘ipackets’
sess->stats.ipackets++;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:866:17: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘ibytes’
sess->stats.ibytes +=
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:888:20: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘ipackets’
ixgbe_ipsec->stats.ipackets += ipackets;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:889:20: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘ibytes’
ixgbe_ipsec->stats.ibytes += ibytes;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:890:20: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘ierrors’
ixgbe_ipsec->stats.ierrors += ierrors;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c: In function ‘ixgbe_crypto_update_tx_stats’:
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:929:16: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘opackets’
sess->stats.opackets++;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:930:16: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘obytes’
sess->stats.obytes +=
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:946:20: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘opackets’
ixgbe_ipsec->stats.opackets += opackets;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c:947:20: error: ‘volatile struct rte_security_ipsec_stats’ has no member named ‘obytes’
ixgbe_ipsec->stats.obytes += obytes;
^
/var/lib/jenkins/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/ixgbe/ixgbe_ipsec.c: At top level:
cc1: error: unrecognized command line option "-Wno-address-of-packed-member" [-Werror]
cc1: all warnings being treated as errors
make[6]: *** [ixgbe_ipsec.o] Error 1
make[5]: *** [ixgbe] Error 2
make[4]: *** [net] Error 2
make[3]: *** [drivers] Error 2
make[2]: *** [all] Error 2
make[1]: *** [pre_install] Error 2
make: *** [install] Error 2
https://lab.dpdk.org/results/dashboard/patchsets/7410/
UNH-IOL DPDK Performance Test Lab
reply other threads:[~2019-09-06 18:05 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190906180509.2A3FA6D55A@noxus.dpdklab.iol.unh.edu \
--to=dpdklab@iol.unh.edu \
--cc=dpdk-test-reports@iol.unh.edu \
--cc=test-report@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).