|WARNING| pw105747 [PATCH 1/1] fix spelling in code

|WARNING| pw105747 [PATCH 1/1] fix spelling in code

[checkpatch]

Test-Label: checkpatch
Test-Status: WARNING
http://dpdk.org/patch/105747

_coding style issues_


WARNING:TYPO_SPELLING: 'slave' may be misspelled - perhaps 'secondary'?
#294: FILE: app/test/test_link_bonding.c:2029:
+test_roundrobin_verify_polling_slave_link_status_change(void)

WARNING:TYPO_SPELLING: 'slave' may be misspelled - perhaps 'secondary'?
#303: FILE: app/test/test_link_bonding.c:5121:
+		TEST_CASE(test_roundrobin_verify_polling_slave_link_status_change),

WARNING:TYPO_SPELLING: 'slave' may be misspelled - perhaps 'secondary'?
#339: FILE: app/test/test_link_bonding_mode4.c:261:
+	RTE_VERIFY(slave->lacp_partner_state == 0);

WARNING:TYPO_SPELLING: 'slave' may be misspelled - perhaps 'secondary'?
#348: FILE: app/test/test_link_bonding_mode4.c:291:
+	slave->lacp_partner_state = 0;

WARNING:TYPO_SPELLING: 'slave' may be misspelled - perhaps 'secondary'?
#364: FILE: app/test/test_link_bonding_mode4.c:510:
+	slave->lacp_partner_state = lacp->actor.state;

WARNING:TYPO_SPELLING: 'slave' may be misspelled - perhaps 'secondary'?
#381: FILE: app/test/test_link_bonding_mode4.c:583:
+	return slave->lacp_partner_state == expected_state;

WARNING:TYPO_SPELLING: 'slave' may be misspelled - perhaps 'secondary'?
#390: FILE: app/test/test_link_bonding_mode4.c:1137:
+				"slave %u unexpectedly transmitted %u packets",

WARNING:TYPO_SPELLING: 'slave' may be misspelled - perhaps 'secondary'?
#408: FILE: app/test/test_link_bonding_mode4.c:1356:
+			TEST_ASSERT(slave->lacp_partner_state & STATE_EXPIRED,

WARNING:TYPO_SPELLING: 'TIM' may be misspelled - perhaps 'TIME'?
#576: FILE: drivers/common/cnxk/roc_mbox.h:1742:
+	TIM_AF_ENA_DONTFREE_NSET_PERIODIC = -816,

WARNING:TYPO_SPELLING: 'TIM' may be misspelled - perhaps 'TIME'?
#589: FILE: drivers/common/cnxk/roc_tim.c:76:
+	case TIM_AF_ENA_DONTFREE_NSET_PERIODIC:

WARNING:TYPO_SPELLING: 'TIM' may be misspelled - perhaps 'TIME'?
#782: FILE: drivers/common/octeontx2/otx2_mbox.h:1628:
+	TIM_AF_ENA_DONTFREE_NSET_PERIODIC	= -816,

ERROR:CODE_INDENT: code indent should use tabs where possible
#795: FILE: drivers/common/sfc_efx/base/ef10_signed_image_layout.h:38:
+                                         * including the certificates and signature */$

WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#795: FILE: drivers/common/sfc_efx/base/ef10_signed_image_layout.h:38:
+                                         * including the certificates and signature */

WARNING:TYPO_SPELLING: 'Acknowledgement' may be misspelled - perhaps 'Acknowledgment'?
#834: FILE: drivers/common/sfc_efx/base/efx_types.h:6:
+ * Acknowledgement to Fen Systems Ltd.

WARNING:TYPO_SPELLING: 'FLE' may be misspelled - perhaps 'FILE'?
#1047: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:451:
+	 * So while retrieving we can go back 1 FLE from the FD -ADDR

WARNING:TYPO_SPELLING: 'FLE' may be misspelled - perhaps 'FILE'?
#1074: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:743:
+	 * So while retrieving we can go back 1 FLE from the FD -ADDR

WARNING:TYPO_SPELLING: 'FLE' may be misspelled - perhaps 'FILE'?
#1083: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:1012:
+	 * So while retrieving we can go back 1 FLE from the FD -ADDR

WARNING:TYPO_SPELLING: 'FLE' may be misspelled - perhaps 'FILE'?
#1092: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:1265:
+	 * So while retrieving we can go back 1 FLE from the FD -ADDR

WARNING:TYPO_SPELLING: 'FLE' may be misspelled - perhaps 'FILE'?
#1127: FILE: drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:1571:
+	 * So while retrieving we can go back 1 FLE from the FD -ADDR

WARNING:TYPO_SPELLING: 'TIM' may be misspelled - perhaps 'TIME'?
#1269: FILE: drivers/event/octeontx2/otx2_tim_evdev.c:148:
+		otx2_err("Unable to allocate new TIM ring.");

WARNING:TYPO_SPELLING: 'TIM' may be misspelled - perhaps 'TIME'?
#1278: FILE: drivers/event/octeontx2/otx2_tim_evdev.c:192:
+	case TIM_AF_ENA_DONTFREE_NSET_PERIODIC:

CHECK:SPACING: No space is necessary after a cast
#1356: FILE: drivers/net/bnx2x/bnx2x.c:4044:
+			    (uint32_t) (attn & HW_INTERRUPT_ASSERT_SET_2));

CHECK:SPACING: No space is necessary after a cast
#1377: FILE: drivers/net/bnx2x/bnx2x.c:4074:
+			    (uint32_t) (attn & HW_INTERRUPT_ASSERT_SET_1));

ERROR:COMPLEX_MACRO: Macros with complex values should be enclosed in parentheses
#1407: FILE: drivers/net/bnx2x/bnx2x.h:1712:
+#define HW_INTERRUPT_ASSERT_SET_0 \
 				(AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT | \
 				 AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT | \
 				 AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT | \

ERROR:COMPLEX_MACRO: Macros with complex values should be enclosed in parentheses
#1416: FILE: drivers/net/bnx2x/bnx2x.h:1725:
+#define HW_INTERRUPT_ASSERT_SET_1 \
 				(AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT | \
 				 AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT | \
 				 AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT | \

ERROR:COMPLEX_MACRO: Macros with complex values should be enclosed in parentheses
#1425: FILE: drivers/net/bnx2x/bnx2x.h:1753:
+#define HW_INTERRUPT_ASSERT_SET_2 \
 				(AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT | \
 				 AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT | \
 				 AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT | \

WARNING:LEADING_SPACE: please, no spaces at the start of a line
#1456: FILE: drivers/net/bnx2x/bnx2x_stats.c:649:
+    ADD_STAT64(stats_rx.rx_grxpf, rx_stat_xoffsetateentered);$

WARNING:LEADING_SPACE: please, no spaces at the start of a line
#1465: FILE: drivers/net/bnx2x/bnx2x_stats.c:732:
+    UPDATE_EXTEND_STAT(rx_stat_xoffsetateentered);$

WARNING:LEADING_SPACE: please, no spaces at the start of a line
#1479: FILE: drivers/net/bnx2x/bnx2x_stats.h:108:
+    uint32_t rx_stat_xoffsetateentered_hi;$

WARNING:LEADING_SPACE: please, no spaces at the start of a line
#1480: FILE: drivers/net/bnx2x/bnx2x_stats.h:109:
+    uint32_t rx_stat_xoffsetateentered_lo;$

WARNING:LONG_LINE_COMMENT: line length of 135 exceeds 100 columns
#1557: FILE: drivers/net/bnx2x/ecore_hsi.h:2757:
+	#define PF_ALLOCATION_MSIX_VECTORS_MASK    0x000000ff /* real value, as PCI config space can show only maximum of 64 vectors */

CHECK:OPEN_ENDED_LINE: Lines should not end with a '('
#2037: FILE: drivers/net/dpaa2/dpaa2_flow.c:1344:
+dpaa2_configure_flow_ip_discrimination(

WARNING:TYPO_SPELLING: 'consective' may be misspelled - perhaps 'consecutive'?
#2175: FILE: drivers/net/enic/base/vnic_devcmd.h:594:
+	 * Set cq array base and size in a list of consective wqs and

WARNING:TYPO_SPELLING: 'wqs' may be misspelled - perhaps 'was'?
#2175: FILE: drivers/net/enic/base/vnic_devcmd.h:594:
+	 * Set cq array base and size in a list of consective wqs and

CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'dev' may be better as '(dev)' to avoid precedence issues
#3269: FILE: drivers/net/ixgbe/ixgbe_bypass_defines.h:109:
+#define IXGBE_DEV_TO_ADAPTER(dev) \
 	((struct ixgbe_adapter *)(dev->data->dev_private))

WARNING:TYPO_SPELLING: 'incase' may be misspelled - perhaps 'in case'?
#3974: FILE: drivers/net/qede/base/ecore_sriov.c:1037:
+ *        cleanness and ease of debugging incase a VF attempts to

total: 4 errors, 28 warnings, 3724 lines checked

|SUCCESS| pw105747 [PATCH 1/1] fix spelling in code

[0-day Robot]

From: robot@bytheb.org

Test-Label: github-robot: build
Test-Status: SUCCESS
http://patchwork.dpdk.org/patch/105747/

_github build: passed_
Build URL: https://github.com/ovsrobot/dpdk/actions/runs/1686461984

|SUCCESS| pw105747 [PATCH] [1/1] fix spelling in code

[dpdklab]

[-- Attachment #1: Type: text/plain, Size: 789 bytes --]

Test-Label: iol-broadcom-Functional
Test-Status: SUCCESS
http://dpdk.org/patch/105747

_Functional Testing PASS_

Submitter: Josh Soref <jsoref@gmail.com>
Date: Wednesday, January 12 2022 07:28:08 
DPDK git baseline: Repo:dpdk
  Branch: master
  CommitID:3f993907ee9d530bc595d973a5f764674fcaf509

105747 --> functional testing pass

Test environment and result as below:

Ubuntu 20.04
Kernel: 4.15.0-65-generic
Compiler: gcc gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
NIC: Broadcom Inc. brcm_57414 25000 Mbps
Target: x86_64-native-linuxapp-gcc
Fail/Total: 0/3


To view detailed results, visit:
https://lab.dpdk.org/results/dashboard/patchsets/20643/

UNH-IOL DPDK Community Lab

To manage your email subscriptions, visit: 
https://lab.dpdk.org/results/dashboard/preferences/subscriptions/

|SUCCESS| pw105747 [PATCH] [1/1] fix spelling in code

[dpdklab]

[-- Attachment #1: Type: text/plain, Size: 1793 bytes --]

Test-Label: iol-broadcom-Performance
Test-Status: SUCCESS
http://dpdk.org/patch/105747

_Performance Testing PASS_

Submitter: Josh Soref <jsoref@gmail.com>
Date: Wednesday, January 12 2022 07:28:08 
DPDK git baseline: Repo:dpdk
  Branch: master
  CommitID:3f993907ee9d530bc595d973a5f764674fcaf509

105747 --> performance testing pass

Test environment and result as below:

Ubuntu 20.04
Kernel: 4.15.0-65-generic
Compiler: gcc gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
NIC: Broadcom Inc. brcm_57414 25000 Mbps
Target: x86_64-native-linuxapp-gcc
Fail/Total: 0/4

Detail performance results: 
+----------+-------------+---------+------------+------------------------------+
| num_cpus | num_threads | txd/rxd | frame_size |  throughput difference from  |
|          |             |         |            |           expected           |
+==========+=============+=========+============+==============================+
| 1        | 2           | 512     | 64         | -0.1%                        |
+----------+-------------+---------+------------+------------------------------+
| 1        | 2           | 2048    | 64         | 0.1%                         |
+----------+-------------+---------+------------+------------------------------+
| 1        | 1           | 512     | 64         | -0.2%                        |
+----------+-------------+---------+------------+------------------------------+
| 1        | 1           | 2048    | 64         | 0.1%                         |
+----------+-------------+---------+------------+------------------------------+

To view detailed results, visit:
https://lab.dpdk.org/results/dashboard/patchsets/20643/

UNH-IOL DPDK Community Lab

To manage your email subscriptions, visit: 
https://lab.dpdk.org/results/dashboard/preferences/subscriptions/