From: dpdklab@iol.unh.edu
To: test-report@dpdk.org
Cc: dpdk-test-reports@iol.unh.edu
Subject: |WARNING| pw115600 [PATCH] examples/ipsec-secgw: support for per SA HW reassembly
Date: Mon, 29 Aug 2022 15:50:41 +0000 (UTC) [thread overview]
Message-ID: <20220829155041.D8A9B6008E@dpdk-ubuntu.dpdklab.iol.unh.edu> (raw)
[-- Attachment #1: Type: text/plain, Size: 3444 bytes --]
Test-Label: iol-testing
Test-Status: WARNING
http://dpdk.org/patch/115600
_apply patch failure_
Submitter: Rahul Bhansali <rbhansali@marvell.com>
Date: Monday, August 29 2022 15:12:33
Applied on: CommitID:09521b1cbeffc81c85ef64564719a4b7e1d10e85
Apply patch set 115600 failed:
Checking patch doc/guides/sample_app_ug/ipsec_secgw.rst...
Checking patch examples/ipsec-secgw/ipsec-secgw.c...
Hunk #6 succeeded at 2053 (offset 6 lines).
Hunk #7 succeeded at 2660 (offset 6 lines).
error: while searching for:
uint16_t portid, nb_crypto_qp, nb_ports = 0;
uint64_t req_rx_offloads[RTE_MAX_ETHPORTS];
uint64_t req_tx_offloads[RTE_MAX_ETHPORTS];
struct eh_conf *eh_conf = NULL;
uint32_t ipv4_cksum_port_mask = 0;
size_t sess_sz;
error: patch failed: examples/ipsec-secgw/ipsec-secgw.c:2918
error: while searching for:
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
sa_check_offloads(portid, &req_rx_offloads[portid],
&req_tx_offloads[portid]);
port_init(portid, req_rx_offloads[portid],
req_tx_offloads[portid]);
if ((req_tx_offloads[portid] & RTE_ETH_TX_OFFLOAD_IPV4_CKSUM))
ipv4_cksum_port_mask = 1U << portid;
}
error: patch failed: examples/ipsec-secgw/ipsec-secgw.c:3037
Checking patch examples/ipsec-secgw/ipsec-secgw.h...
Checking patch examples/ipsec-secgw/ipsec.c...
Checking patch examples/ipsec-secgw/ipsec.h...
Hunk #1 succeeded at 129 (offset -2 lines).
Hunk #2 succeeded at 206 (offset -2 lines).
Hunk #3 succeeded at 433 (offset -2 lines).
Checking patch examples/ipsec-secgw/ipsec_worker.c...
Checking patch examples/ipsec-secgw/ipsec_worker.h...
Checking patch examples/ipsec-secgw/sa.c...
Applied patch doc/guides/sample_app_ug/ipsec_secgw.rst cleanly.
Applying patch examples/ipsec-secgw/ipsec-secgw.c with 2 rejects...
Hunk #1 applied cleanly.
Hunk #2 applied cleanly.
Hunk #3 applied cleanly.
Hunk #4 applied cleanly.
Hunk #5 applied cleanly.
Hunk #6 applied cleanly.
Hunk #7 applied cleanly.
Rejected hunk #8.
Rejected hunk #9.
Applied patch examples/ipsec-secgw/ipsec-secgw.h cleanly.
Applied patch examples/ipsec-secgw/ipsec.c cleanly.
Applied patch examples/ipsec-secgw/ipsec.h cleanly.
Applied patch examples/ipsec-secgw/ipsec_worker.c cleanly.
Applied patch examples/ipsec-secgw/ipsec_worker.h cleanly.
Applied patch examples/ipsec-secgw/sa.c cleanly.
diff a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c (rejected hunks)
@@ -2918,6 +2933,7 @@ main(int32_t argc, char **argv)
uint16_t portid, nb_crypto_qp, nb_ports = 0;
uint64_t req_rx_offloads[RTE_MAX_ETHPORTS];
uint64_t req_tx_offloads[RTE_MAX_ETHPORTS];
+ uint8_t req_hw_reassembly[RTE_MAX_ETHPORTS];
struct eh_conf *eh_conf = NULL;
uint32_t ipv4_cksum_port_mask = 0;
size_t sess_sz;
@@ -3037,10 +3053,10 @@ main(int32_t argc, char **argv)
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
- sa_check_offloads(portid, &req_rx_offloads[portid],
- &req_tx_offloads[portid]);
- port_init(portid, req_rx_offloads[portid],
- req_tx_offloads[portid]);
+ sa_check_offloads(portid, &req_rx_offloads[portid], &req_tx_offloads[portid],
+ &req_hw_reassembly[portid]);
+ port_init(portid, req_rx_offloads[portid], req_tx_offloads[portid],
+ req_hw_reassembly[portid]);
if ((req_tx_offloads[portid] & RTE_ETH_TX_OFFLOAD_IPV4_CKSUM))
ipv4_cksum_port_mask = 1U << portid;
}
https://lab.dpdk.org/results/dashboard/patchsets/23338/
UNH-IOL DPDK Community Lab
reply other threads:[~2022-08-29 15:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220829155041.D8A9B6008E@dpdk-ubuntu.dpdklab.iol.unh.edu \
--to=dpdklab@iol.unh.edu \
--cc=dpdk-test-reports@iol.unh.edu \
--cc=test-report@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).