Test-Label: iol-testing
Test-Status: WARNING
http://dpdk.org/patch/117239

_apply patch failure_

Submitter: Nicolas Chautru <nicolas.chautru@intel.com>
Date: Saturday, October 01 2022 01:15:47 
Applied on: CommitID:8ae946970ed36f6f8795ea056350a500007c91d8
Apply patch set 117239 failed:

Checking patch doc/guides/prog_guide/bbdev.rst...
error: while searching for:
The API allows more generally for flexibility in what the PMD may support (capability flags) and
flexibility to adjust some of the parameters of the processing.

The operation/capability flags that can be set for each FFT operation are given below.

  **NOTE:** The actual operation flags that may be used with a specific
  BBDEV PMD are dependent on the driver capabilities as reported via
  ``rte_bbdev_info_get()``, and may be a subset of those below.

+--------------------------------------------------------------------+
|Description of FFT capability flags                                 |
+====================================================================+

error: patch failed: doc/guides/prog_guide/bbdev.rst:1135
Checking patch lib/bbdev/rte_bbdev_op.h...
Hunk #1 succeeded at 374 (offset -28 lines).
Hunk #2 succeeded at 419 (offset -28 lines).
Hunk #3 succeeded at 450 (offset -28 lines).
Hunk #4 succeeded at 512 (offset -28 lines).
Hunk #5 succeeded at 621 (offset -28 lines).
Hunk #6 succeeded at 642 (offset -28 lines).
Hunk #7 succeeded at 657 (offset -28 lines).
error: while searching for:
		struct rte_bbdev_op_enc_ldpc_tb_params tb_params;
	};
};

/** Operation structure for FFT processing.
 *

error: patch failed: lib/bbdev/rte_bbdev_op.h:716
error: while searching for:
 * The output mbuf data structure is expected to be allocated by the
 * application with enough room for the output data.
 */
struct rte_bbdev_op_fft {
	/** Input data starting from first antenna */
	struct rte_bbdev_op_data base_input;

error: patch failed: lib/bbdev/rte_bbdev_op.h:725
error: while searching for:
	/** Adjust the FP6 exponent for INT<->FP16 conversion */
	uint16_t fp16_exp_adjust;
};

/** List of the capabilities for the Turbo Decoder */
struct rte_bbdev_op_cap_turbo_dec {

error: patch failed: lib/bbdev/rte_bbdev_op.h:765
Applying patch doc/guides/prog_guide/bbdev.rst with 1 reject...
Hunk #1 applied cleanly.
Hunk #2 applied cleanly.
Hunk #3 applied cleanly.
Hunk #4 applied cleanly.
Rejected hunk #5.
Applying patch lib/bbdev/rte_bbdev_op.h with 3 rejects...
Hunk #1 applied cleanly.
Hunk #2 applied cleanly.
Hunk #3 applied cleanly.
Hunk #4 applied cleanly.
Hunk #5 applied cleanly.
Hunk #6 applied cleanly.
Hunk #7 applied cleanly.
Rejected hunk #8.
Rejected hunk #9.
Rejected hunk #10.
diff a/doc/guides/prog_guide/bbdev.rst b/doc/guides/prog_guide/bbdev.rst	(rejected hunks)
@@ -1135,12 +1070,18 @@ A flexible number of Rx antennas are being processed in parallel with the same c
 The API allows more generally for flexibility in what the PMD may support (capability flags) and
 flexibility to adjust some of the parameters of the processing.
 
-The operation/capability flags that can be set for each FFT operation are given below.
+The structure passed for each FFT operation is given below,
+with the operation flags forming a bitmask in the ``op_flags`` field.
 
   **NOTE:** The actual operation flags that may be used with a specific
   BBDEV PMD are dependent on the driver capabilities as reported via
   ``rte_bbdev_info_get()``, and may be a subset of those below.
 
+.. literalinclude:: ../../../lib/bbdev/rte_bbdev_op.h
+   :language: c
+   :start-after: Structure rte_bbdev_op_fft 8<
+   :end-before: >8 End of structure rte_bbdev_op_fft.
+
 +--------------------------------------------------------------------+
 |Description of FFT capability flags                                 |
 +====================================================================+
diff a/lib/bbdev/rte_bbdev_op.h b/lib/bbdev/rte_bbdev_op.h	(rejected hunks)
@@ -716,6 +727,7 @@ struct rte_bbdev_op_ldpc_enc {
 		struct rte_bbdev_op_enc_ldpc_tb_params tb_params;
 	};
 };
+/* >8 End of structure rte_bbdev_op_ldpc_enc. */
 
 /** Operation structure for FFT processing.
  *
@@ -725,6 +737,8 @@ struct rte_bbdev_op_ldpc_enc {
  * The output mbuf data structure is expected to be allocated by the
  * application with enough room for the output data.
  */
+
+/* Structure rte_bbdev_op_fft 8< */
 struct rte_bbdev_op_fft {
 	/** Input data starting from first antenna */
 	struct rte_bbdev_op_data base_input;
@@ -765,6 +779,7 @@ struct rte_bbdev_op_fft {
 	/** Adjust the FP6 exponent for INT<->FP16 conversion */
 	uint16_t fp16_exp_adjust;
 };
+/* >8 End of structure rte_bbdev_op_fft. */
 
 /** List of the capabilities for the Turbo Decoder */
 struct rte_bbdev_op_cap_turbo_dec {

https://lab.dpdk.org/results/dashboard/patchsets/23735/

UNH-IOL DPDK Community Lab