* |SUCCESS| pw130663-130674 [PATCH 12/12] crypto/dpaa2_sec: add support to set df and diffserv
[not found] <20230823070855.27532-13-hemant.agrawal@nxp.com>
@ 2023-08-23 6:58 ` qemudev
2023-08-23 7:02 ` qemudev
` (2 subsequent siblings)
3 siblings, 0 replies; 4+ messages in thread
From: qemudev @ 2023-08-23 6:58 UTC (permalink / raw)
To: test-report
Test-Label: loongarch-compilation
Test-Status: SUCCESS
http://dpdk.org/patch/130674
_Compilation OK_
Submitter: Hemant Agrawal <hemant.agrawal@nxp.com>
Date: Wed, 23 Aug 2023 12:38:44 +0530
DPDK git baseline: Repo:dpdk
Branch: main
CommitID: 971d2b57972919527e27ed683032a71864a2eb56
130663-130674 --> meson & ninja build successfully
Test environment and result as below:
+---------------------+----------------+
| Environment | compilation |
+---------------------+----------------+
| Loongnix-Server 8.3 | PASS |
+---------------------+----------------+
Loongnix-Server 8.3
Kernel: 4.19.190+
Compiler: gcc 8.3
^ permalink raw reply [flat|nested] 4+ messages in thread* |SUCCESS| pw130663-130674 [PATCH 12/12] crypto/dpaa2_sec: add support to set df and diffserv
[not found] <20230823070855.27532-13-hemant.agrawal@nxp.com>
2023-08-23 6:58 ` |SUCCESS| pw130663-130674 [PATCH 12/12] crypto/dpaa2_sec: add support to set df and diffserv qemudev
@ 2023-08-23 7:02 ` qemudev
2023-08-23 7:12 ` |SUCCESS| pw130674 " checkpatch
2023-08-23 7:59 ` |FAILURE| " 0-day Robot
3 siblings, 0 replies; 4+ messages in thread
From: qemudev @ 2023-08-23 7:02 UTC (permalink / raw)
To: test-report
Test-Label: loongarch-unit-testing
Test-Status: SUCCESS
http://dpdk.org/patch/130674
_Unit Testing PASS_
Submitter: Hemant Agrawal <hemant.agrawal@nxp.com>
Date: Wed, 23 Aug 2023 12:38:44 +0530
DPDK git baseline: Repo:dpdk
Branch: main
CommitID: 971d2b57972919527e27ed683032a71864a2eb56
130663-130674 --> testing pass
Test environment and result as below:
+---------------------+----------------+
| Environment | dpdk_unit_test |
+---------------------+----------------+
| Loongnix-Server 8.3 | PASS |
+---------------------+----------------+
Loongnix-Server 8.3
Kernel: 4.19.190+
Compiler: gcc 8.3
Test result details:
1/106 DPDK:fast-tests / acl_autotest OK 2.83s
2/106 DPDK:fast-tests / atomic_autotest OK 7.23s
3/106 DPDK:fast-tests / bitmap_autotest OK 0.07s
4/106 DPDK:fast-tests / bpf_autotest OK 0.07s
5/106 DPDK:fast-tests / bpf_convert_autotest OK 0.12s
6/106 DPDK:fast-tests / bitops_autotest OK 0.07s
7/106 DPDK:fast-tests / byteorder_autotest OK 0.07s
8/106 DPDK:fast-tests / cksum_autotest OK 0.07s
9/106 DPDK:fast-tests / cmdline_autotest OK 0.07s
10/106 DPDK:fast-tests / common_autotest OK 0.92s
11/106 DPDK:fast-tests / cpuflags_autotest OK 0.07s
12/106 DPDK:fast-tests / debug_autotest OK 0.97s
13/106 DPDK:fast-tests / devargs_autotest OK 0.12s
14/106 DPDK:fast-tests / eal_flags_c_opt_autotest OK 1.32s
15/106 DPDK:fast-tests / eal_flags_main_opt_autotest OK 0.32s
16/106 DPDK:fast-tests / eal_flags_n_opt_autotest OK 0.27s
17/106 DPDK:fast-tests / eal_flags_hpet_autotest OK 0.17s
18/106 DPDK:fast-tests / eal_flags_no_huge_autotest OK 0.32s
19/106 DPDK:fast-tests / eal_flags_a_opt_autotest OK 0.42s
20/106 DPDK:fast-tests / eal_flags_b_opt_autotest OK 0.37s
21/106 DPDK:fast-tests / eal_flags_vdev_opt_autotest OK 0.27s
22/106 DPDK:fast-tests / eal_flags_r_opt_autotest OK 0.27s
23/106 DPDK:fast-tests / eal_flags_mem_autotest OK 0.77s
24/106 DPDK:fast-tests / eal_flags_file_prefix_autotest OK 22.47s
25/106 DPDK:fast-tests / eal_flags_misc_autotest OK 1.17s
26/106 DPDK:fast-tests / eal_fs_autotest OK 0.07s
27/106 DPDK:fast-tests / errno_autotest OK 0.07s
28/106 DPDK:fast-tests / ethdev_link_status OK 0.07s
29/106 DPDK:fast-tests / event_ring_autotest OK 0.07s
30/106 DPDK:fast-tests / fib_autotest OK 0.87s
31/106 DPDK:fast-tests / fib6_autotest OK 0.92s
32/106 DPDK:fast-tests / func_reentrancy_autotest OK 2.18s
33/106 DPDK:fast-tests / hash_autotest OK 1.02s
34/106 DPDK:fast-tests / interrupt_autotest OK 1.42s
35/106 DPDK:fast-tests / ipfrag_autotest OK 0.12s
36/106 DPDK:fast-tests / lcores_autotest OK 5.13s
37/106 DPDK:fast-tests / logs_autotest OK 0.07s
38/106 DPDK:fast-tests / lpm_autotest OK 5.96s
39/106 DPDK:fast-tests / lpm6_autotest OK 8.92s
40/106 DPDK:fast-tests / malloc_autotest OK 63.06s
41/106 DPDK:fast-tests / mbuf_autotest OK 5.93s
42/106 DPDK:fast-tests / mcslock_autotest OK 3.27s
43/106 DPDK:fast-tests / memcpy_autotest OK 6.68s
44/106 DPDK:fast-tests / memory_autotest OK 0.12s
45/106 DPDK:fast-tests / mempool_autotest OK 0.47s
46/106 DPDK:fast-tests / memzone_autotest OK 0.17s
47/106 DPDK:fast-tests / meter_autotest OK 0.07s
48/106 DPDK:fast-tests / multiprocess_autotest OK 0.27s
49/106 DPDK:fast-tests / per_lcore_autotest OK 0.17s
50/106 DPDK:fast-tests / pflock_autotest OK 0.92s
51/106 DPDK:fast-tests / prefetch_autotest OK 0.07s
52/106 DPDK:fast-tests / rcu_qsbr_autotest OK 0.62s
53/106 DPDK:fast-tests / pie_autotest OK 0.07s
54/106 DPDK:fast-tests / rib_autotest OK 10.35s
55/106 DPDK:fast-tests / rib6_autotest OK 10.35s
56/106 DPDK:fast-tests / ring_autotest OK 0.12s
57/106 DPDK:fast-tests / rwlock_test1_autotest OK 0.87s
58/106 DPDK:fast-tests / rwlock_rda_autotest OK 5.12s
59/106 DPDK:fast-tests / rwlock_rds_wrm_autotest OK 5.12s
60/106 DPDK:fast-tests / rwlock_rde_wro_autotest OK 5.12s
61/106 DPDK:fast-tests / sched_autotest OK 0.07s
62/106 DPDK:fast-tests / security_autotest OK 0.07s
63/106 DPDK:fast-tests / seqlock_autotest OK 2.07s
64/106 DPDK:fast-tests / spinlock_autotest OK 0.17s
65/106 DPDK:fast-tests / stack_autotest OK 0.87s
66/106 DPDK:fast-tests / stack_lf_autotest SKIP 0.07s exit status 77
67/106 DPDK:fast-tests / string_autotest OK 0.07s
68/106 DPDK:fast-tests / tailq_autotest OK 0.07s
69/106 DPDK:fast-tests / ticketlock_autotest OK 0.27s
70/106 DPDK:fast-tests / timer_autotest OK 4.02s
71/106 DPDK:fast-tests / user_delay_us OK 0.07s
72/106 DPDK:fast-tests / version_autotest OK 0.07s
73/106 DPDK:fast-tests / crc_autotest OK 0.07s
74/106 DPDK:fast-tests / distributor_autotest OK 1.27s
75/106 DPDK:fast-tests / eventdev_common_autotest OK 0.07s
76/106 DPDK:fast-tests / fbarray_autotest OK 0.12s
77/106 DPDK:fast-tests / hash_readwrite_func_autotest OK 6.49s
78/106 DPDK:fast-tests / ipsec_autotest SKIP 0.12s exit status 77
79/106 DPDK:fast-tests / kvargs_autotest OK 0.12s
80/106 DPDK:fast-tests / member_autotest OK 1.27s
81/106 DPDK:fast-tests / power_cpufreq_autotest SKIP 0.07s exit status 77
82/106 DPDK:fast-tests / power_autotest OK 0.07s
83/106 DPDK:fast-tests / power_kvm_vm_autotest SKIP 0.07s exit status 77
84/106 DPDK:fast-tests / power_intel_uncore_autotest SKIP 0.07s exit status 77
85/106 DPDK:fast-tests / reorder_autotest OK 0.12s
86/106 DPDK:fast-tests / service_autotest OK 2.82s
87/106 DPDK:fast-tests / thash_autotest OK 0.07s
88/106 DPDK:fast-tests / threads_autotest OK 0.27s
89/106 DPDK:fast-tests / trace_autotest OK 0.07s
90/106 DPDK:fast-tests / trace_autotest_with_traces OK 0.12s
91/106 DPDK:fast-tests / graph_autotest OK 0.07s
92/106 DPDK:fast-tests / node_list_dump OK 0.07s
93/106 DPDK:fast-tests / metrics_autotest OK 0.07s
94/106 DPDK:fast-tests / telemetry_json_autotest OK 0.07s
95/106 DPDK:fast-tests / telemetry_data_autotest OK 0.12s
96/106 DPDK:fast-tests / table_autotest OK 10.21s
97/106 DPDK:fast-tests / ring_pmd_autotest OK 0.07s
98/106 DPDK:fast-tests / event_eth_tx_adapter_autotest OK 1.72s
99/106 DPDK:fast-tests / bitratestats_autotest OK 0.07s
100/106 DPDK:fast-tests / latencystats_autotest OK 0.07s
101/106 DPDK:fast-tests / pdump_autotest OK 5.23s
102/106 DPDK:fast-tests / vdev_autotest OK 0.07s
103/106 DPDK:fast-tests / rawdev_autotest OK 0.07s
104/106 DPDK:fast-tests / pdcp_autotest SKIP 0.07s exit status 77
105/106 DPDK:fast-tests / compressdev_autotest SKIP 0.07s exit status 77
106/106 DPDK:fast-tests / telemetry_all OK 17.35s
Ok: 99
Expected Fail: 0
Fail: 0
Unexpected Pass: 0
Skipped: 7
Timeout: 0
^ permalink raw reply [flat|nested] 4+ messages in thread* |SUCCESS| pw130674 [PATCH 12/12] crypto/dpaa2_sec: add support to set df and diffserv
[not found] <20230823070855.27532-13-hemant.agrawal@nxp.com>
2023-08-23 6:58 ` |SUCCESS| pw130663-130674 [PATCH 12/12] crypto/dpaa2_sec: add support to set df and diffserv qemudev
2023-08-23 7:02 ` qemudev
@ 2023-08-23 7:12 ` checkpatch
2023-08-23 7:59 ` |FAILURE| " 0-day Robot
3 siblings, 0 replies; 4+ messages in thread
From: checkpatch @ 2023-08-23 7:12 UTC (permalink / raw)
To: test-report
Test-Label: checkpatch
Test-Status: SUCCESS
http://dpdk.org/patch/130674
_coding style OK_
^ permalink raw reply [flat|nested] 4+ messages in thread* |FAILURE| pw130674 [PATCH 12/12] crypto/dpaa2_sec: add support to set df and diffserv
[not found] <20230823070855.27532-13-hemant.agrawal@nxp.com>
` (2 preceding siblings ...)
2023-08-23 7:12 ` |SUCCESS| pw130674 " checkpatch
@ 2023-08-23 7:59 ` 0-day Robot
3 siblings, 0 replies; 4+ messages in thread
From: 0-day Robot @ 2023-08-23 7:59 UTC (permalink / raw)
To: test-report; +Cc: hemant.agrawal, robot
From: robot@bytheb.org
Test-Label: github-robot: build
Test-Status: FAILURE
http://patchwork.dpdk.org/patch/130674/
_github build: failed_
Build URL: https://github.com/ovsrobot/dpdk/actions/runs/5948263026
Build Logs:
-----------------------Summary of failed steps-----------------------
"ubuntu-20.04-gcc-static-i386" failed at step Build and test
"ubuntu-20.04-gcc-shared-aarch64" failed at step Build and test
"ubuntu-20.04-gcc-ppc64le" failed at step Build and test
"ubuntu-20.04-gcc-riscv64" failed at step Build and test
"fedora:37-gcc" failed at step Build
----------------------End summary of failed steps--------------------
-------------------------------BEGIN LOGS----------------------------
####################################################################################
#### [Begin job log] "ubuntu-20.04-gcc-static-i386" at step Build and test
####################################################################################
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3241:18: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3241 | uh->dst_port = rte_cpu_to_be_16(dport);
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3242:19: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3242 | uh->dgram_len = 0;
| ~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3243:21: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3243 | uh->dgram_cksum = 0;
| ~~~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
cc1: all warnings being treated as errors
[1685/3071] Linking target drivers/librte_event_opdl.so.24.0.
[1686/3071] Linking target drivers/librte_event_skeleton.so.24.0.
ninja: build stopped: subcommand failed.
##[error]Process completed with exit code 1.
####################################################################################
#### [End job log] "ubuntu-20.04-gcc-static-i386" at step Build and test
####################################################################################
####################################################################################
#### [Begin job log] "ubuntu-20.04-gcc-shared-aarch64" at step Build and test
####################################################################################
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3241:18: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3241 | uh->dst_port = rte_cpu_to_be_16(dport);
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3242:19: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3242 | uh->dgram_len = 0;
| ~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3243:21: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3243 | uh->dgram_cksum = 0;
| ~~~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
cc1: all warnings being treated as errors
[2132/3986] Generating symbol file 'drivers/a715181@@rte_crypto_dpaa_sec@sha/librte_crypto_dpaa_sec.so.24.0.symbols'.
[2133/3986] Generating rte_crypto_scheduler.pmd.c with a custom command.
ninja: build stopped: subcommand failed.
##[error]Process completed with exit code 1.
####################################################################################
#### [End job log] "ubuntu-20.04-gcc-shared-aarch64" at step Build and test
####################################################################################
####################################################################################
#### [Begin job log] "ubuntu-20.04-gcc-ppc64le" at step Build and test
####################################################################################
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3241:18: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3241 | uh->dst_port = rte_cpu_to_be_16(dport);
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3242:19: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3242 | uh->dgram_len = 0;
| ~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3243:21: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3243 | uh->dgram_cksum = 0;
| ~~~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
cc1: all warnings being treated as errors
[1933/3288] Generating rte_event_skeleton.pmd.c with a custom command.
[1934/3288] Generating rte_event_opdl.pmd.c with a custom command.
ninja: build stopped: subcommand failed.
##[error]Process completed with exit code 1.
####################################################################################
#### [End job log] "ubuntu-20.04-gcc-ppc64le" at step Build and test
####################################################################################
####################################################################################
#### [Begin job log] "ubuntu-20.04-gcc-riscv64" at step Build and test
####################################################################################
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3241:18: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3241 | uh->dst_port = rte_cpu_to_be_16(dport);
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3242:19: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3242 | uh->dgram_len = 0;
| ~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3243:21: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3243 | uh->dgram_cksum = 0;
| ~~~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
cc1: all warnings being treated as errors
[1768/3260] Linking static target drivers/libtmp_rte_crypto_nitrox.a.
[1769/3260] Generating rte_crypto_dpaa_sec.pmd.c with a custom command.
ninja: build stopped: subcommand failed.
##[error]Process completed with exit code 1.
####################################################################################
#### [End job log] "ubuntu-20.04-gcc-riscv64" at step Build and test
####################################################################################
####################################################################################
#### [Begin job log] "fedora:37-gcc" at step Build
####################################################################################
####################################################################################
#### [End job log] "fedora:37-gcc" at step Build
####################################################################################
--------------------------------END LOGS-----------------------------
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-08-23 7:59 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20230823070855.27532-13-hemant.agrawal@nxp.com>
2023-08-23 6:58 ` |SUCCESS| pw130663-130674 [PATCH 12/12] crypto/dpaa2_sec: add support to set df and diffserv qemudev
2023-08-23 7:02 ` qemudev
2023-08-23 7:12 ` |SUCCESS| pw130674 " checkpatch
2023-08-23 7:59 ` |FAILURE| " 0-day Robot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).