From: 0-day Robot <robot@bytheb.org>
To: test-report@dpdk.org
Cc: hemant.agrawal@nxp.com, robot@bytheb.org
Subject: |FAILURE| pw130674 [PATCH 12/12] crypto/dpaa2_sec: add support to set df and diffserv
Date: Wed, 23 Aug 2023 03:59:18 -0400 [thread overview]
Message-ID: <20230823075918.144570-1-robot@bytheb.org> (raw)
In-Reply-To: <20230823070855.27532-13-hemant.agrawal@nxp.com>
From: robot@bytheb.org
Test-Label: github-robot: build
Test-Status: FAILURE
http://patchwork.dpdk.org/patch/130674/
_github build: failed_
Build URL: https://github.com/ovsrobot/dpdk/actions/runs/5948263026
Build Logs:
-----------------------Summary of failed steps-----------------------
"ubuntu-20.04-gcc-static-i386" failed at step Build and test
"ubuntu-20.04-gcc-shared-aarch64" failed at step Build and test
"ubuntu-20.04-gcc-ppc64le" failed at step Build and test
"ubuntu-20.04-gcc-riscv64" failed at step Build and test
"fedora:37-gcc" failed at step Build
----------------------End summary of failed steps--------------------
-------------------------------BEGIN LOGS----------------------------
####################################################################################
#### [Begin job log] "ubuntu-20.04-gcc-static-i386" at step Build and test
####################################################################################
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3241:18: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3241 | uh->dst_port = rte_cpu_to_be_16(dport);
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3242:19: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3242 | uh->dgram_len = 0;
| ~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3243:21: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3243 | uh->dgram_cksum = 0;
| ~~~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
cc1: all warnings being treated as errors
[1685/3071] Linking target drivers/librte_event_opdl.so.24.0.
[1686/3071] Linking target drivers/librte_event_skeleton.so.24.0.
ninja: build stopped: subcommand failed.
##[error]Process completed with exit code 1.
####################################################################################
#### [End job log] "ubuntu-20.04-gcc-static-i386" at step Build and test
####################################################################################
####################################################################################
#### [Begin job log] "ubuntu-20.04-gcc-shared-aarch64" at step Build and test
####################################################################################
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3241:18: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3241 | uh->dst_port = rte_cpu_to_be_16(dport);
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3242:19: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3242 | uh->dgram_len = 0;
| ~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3243:21: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3243 | uh->dgram_cksum = 0;
| ~~~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
cc1: all warnings being treated as errors
[2132/3986] Generating symbol file 'drivers/a715181@@rte_crypto_dpaa_sec@sha/librte_crypto_dpaa_sec.so.24.0.symbols'.
[2133/3986] Generating rte_crypto_scheduler.pmd.c with a custom command.
ninja: build stopped: subcommand failed.
##[error]Process completed with exit code 1.
####################################################################################
#### [End job log] "ubuntu-20.04-gcc-shared-aarch64" at step Build and test
####################################################################################
####################################################################################
#### [Begin job log] "ubuntu-20.04-gcc-ppc64le" at step Build and test
####################################################################################
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3241:18: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3241 | uh->dst_port = rte_cpu_to_be_16(dport);
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3242:19: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3242 | uh->dgram_len = 0;
| ~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3243:21: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3243 | uh->dgram_cksum = 0;
| ~~~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
cc1: all warnings being treated as errors
[1933/3288] Generating rte_event_skeleton.pmd.c with a custom command.
[1934/3288] Generating rte_event_opdl.pmd.c with a custom command.
ninja: build stopped: subcommand failed.
##[error]Process completed with exit code 1.
####################################################################################
#### [End job log] "ubuntu-20.04-gcc-ppc64le" at step Build and test
####################################################################################
####################################################################################
#### [Begin job log] "ubuntu-20.04-gcc-riscv64" at step Build and test
####################################################################################
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3241:18: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3241 | uh->dst_port = rte_cpu_to_be_16(dport);
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3242:19: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3242 | uh->dgram_len = 0;
| ~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3243:21: error: array subscript 50 is outside array bounds of ‘uint8_t[48]’ {aka ‘unsigned char[48]’} [-Werror=array-bounds]
3243 | uh->dgram_cksum = 0;
| ~~~~~~~~~~~~~~~~^~~
../drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c:3166:11: note: while referencing ‘hdr’
3166 | uint8_t hdr[48] = {};
| ^~~
cc1: all warnings being treated as errors
[1768/3260] Linking static target drivers/libtmp_rte_crypto_nitrox.a.
[1769/3260] Generating rte_crypto_dpaa_sec.pmd.c with a custom command.
ninja: build stopped: subcommand failed.
##[error]Process completed with exit code 1.
####################################################################################
#### [End job log] "ubuntu-20.04-gcc-riscv64" at step Build and test
####################################################################################
####################################################################################
#### [Begin job log] "fedora:37-gcc" at step Build
####################################################################################
####################################################################################
#### [End job log] "fedora:37-gcc" at step Build
####################################################################################
--------------------------------END LOGS-----------------------------
prev parent reply other threads:[~2023-08-23 7:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20230823070855.27532-13-hemant.agrawal@nxp.com>
2023-08-23 6:58 ` |SUCCESS| pw130663-130674 " qemudev
2023-08-23 7:02 ` qemudev
2023-08-23 7:12 ` |SUCCESS| pw130674 " checkpatch
2023-08-23 7:59 ` 0-day Robot [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230823075918.144570-1-robot@bytheb.org \
--to=robot@bytheb.org \
--cc=hemant.agrawal@nxp.com \
--cc=test-report@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).