* |FAILURE| pw138466-138470 [PATCH v8 5/5] eal: initialize logging before plugins
[not found] <20240318183233.142330-6-stephen@networkplumber.org>
2024-03-18 18:10 ` |SUCCESS| pw138466-138470 [PATCH v8 5/5] eal: initialize logging before plugins qemudev
@ 2024-03-18 18:14 ` qemudev
2024-03-18 18:34 ` |SUCCESS| pw138470 " checkpatch
2024-03-18 19:23 ` |FAILURE| " 0-day Robot
3 siblings, 0 replies; 4+ messages in thread
From: qemudev @ 2024-03-18 18:14 UTC (permalink / raw)
To: test-report; +Cc: Stephen Hemminger, zhoumin
Test-Label: loongarch-unit-testing
Test-Status: FAILURE
http://dpdk.org/patch/138470
_Unit Testing FAIL_
Submitter: Stephen Hemminger <stephen@networkplumber.org>
Date: Mon, 18 Mar 2024 11:30:02 -0700
DPDK git baseline: Repo:dpdk
Branch: main
CommitID: 80ecef6d1f71fcebc0a51d7cabc51f73ee142ff2
138466-138470 --> testing fail
Test environment and result as below:
+---------------------+----------------+
| Environment | dpdk_unit_test |
+---------------------+----------------+
| Loongnix-Server 8.3 | FAIL |
+---------------------+----------------+
Loongnix-Server 8.3
Kernel: 4.19.190+
Compiler: gcc 8.3
Test result details:
1/112 DPDK:fast-tests / acl_autotest OK 3.17s
2/112 DPDK:fast-tests / argparse_autotest OK 0.42s
3/112 DPDK:fast-tests / atomic_autotest OK 8.63s
4/112 DPDK:fast-tests / bitcount_autotest OK 0.32s
5/112 DPDK:fast-tests / bitmap_autotest OK 0.32s
6/112 DPDK:fast-tests / bitops_autotest OK 0.32s
7/112 DPDK:fast-tests / bitratestats_autotest OK 0.32s
8/112 DPDK:fast-tests / bpf_autotest OK 0.32s
9/112 DPDK:fast-tests / bpf_convert_autotest OK 0.32s
10/112 DPDK:fast-tests / byteorder_autotest OK 0.32s
11/112 DPDK:fast-tests / cksum_autotest OK 0.32s
12/112 DPDK:fast-tests / cmdline_autotest OK 0.32s
13/112 DPDK:fast-tests / common_autotest OK 1.17s
14/112 DPDK:fast-tests / compressdev_autotest SKIP 0.12s exit status 77
15/112 DPDK:fast-tests / cpuflags_autotest OK 0.32s
16/112 DPDK:fast-tests / crc_autotest OK 0.32s
17/112 DPDK:fast-tests / user_delay_us OK 0.32s
18/112 DPDK:fast-tests / debug_autotest OK 20.86s
19/112 DPDK:fast-tests / devargs_autotest OK 0.42s
20/112 DPDK:fast-tests / dispatcher_autotest OK 2.47s
21/112 DPDK:fast-tests / distributor_autotest OK 1.22s
22/112 DPDK:fast-tests / eal_flags_c_opt_autotest FAIL 0.12s exit status 255
23/112 DPDK:fast-tests / eal_flags_main_opt_autotest FAIL 0.27s exit status 255
24/112 DPDK:fast-tests / eal_flags_n_opt_autotest OK 0.27s
25/112 DPDK:fast-tests / eal_flags_hpet_autotest FAIL 0.12s exit status 255
26/112 DPDK:fast-tests / eal_flags_no_huge_autotest OK 0.32s
27/112 DPDK:fast-tests / eal_flags_a_opt_autotest FAIL 0.37s exit status 255
28/112 DPDK:fast-tests / eal_flags_b_opt_autotest FAIL 0.37s exit status 255
29/112 DPDK:fast-tests / eal_flags_vdev_opt_autotest OK 0.27s
30/112 DPDK:fast-tests / eal_flags_r_opt_autotest FAIL 0.27s exit status 255
31/112 DPDK:fast-tests / eal_flags_mem_autotest FAIL 0.12s exit status 255
32/112 DPDK:fast-tests / eal_flags_file_prefix_autotest FAIL 0.07s exit status 255
33/112 DPDK:fast-tests / eal_flags_misc_autotest FAIL 0.17s exit status 255
34/112 DPDK:fast-tests / eal_fs_autotest OK 0.32s
35/112 DPDK:fast-tests / errno_autotest OK 0.32s
36/112 DPDK:fast-tests / ethdev_link_status OK 0.32s
37/112 DPDK:fast-tests / event_eth_tx_adapter_autotest OK 1.72s
38/112 DPDK:fast-tests / event_ring_autotest OK 0.32s
39/112 DPDK:fast-tests / eventdev_common_autotest OK 0.32s
40/112 DPDK:fast-tests / eventdev_selftest_sw OK 7.28s
41/112 DPDK:fast-tests / fbarray_autotest OK 0.32s
42/112 DPDK:fast-tests / fib_autotest OK 1.02s
43/112 DPDK:fast-tests / fib6_autotest OK 1.07s
44/112 DPDK:fast-tests / func_reentrancy_autotest OK 2.23s
45/112 DPDK:fast-tests / graph_autotest OK 0.32s
46/112 DPDK:fast-tests / node_list_dump OK 0.32s
47/112 DPDK:fast-tests / hash_autotest OK 1.27s
48/112 DPDK:fast-tests / hash_readwrite_func_autotest OK 6.43s
49/112 DPDK:fast-tests / interrupt_autotest OK 1.62s
50/112 DPDK:fast-tests / ipfrag_autotest OK 0.12s
51/112 DPDK:fast-tests / ipsec_autotest SKIP 0.32s exit status 77
52/112 DPDK:fast-tests / kvargs_autotest OK 0.32s
53/112 DPDK:fast-tests / latencystats_autotest OK 0.37s
54/112 DPDK:fast-tests / lcores_autotest OK 5.38s
55/112 DPDK:fast-tests / logs_autotest OK 0.32s
56/112 DPDK:fast-tests / lpm_autotest OK 2.38s
57/112 DPDK:fast-tests / lpm6_autotest OK 5.53s
58/112 DPDK:fast-tests / malloc_autotest OK 60.45s
59/112 DPDK:fast-tests / mbuf_autotest OK 5.33s
60/112 DPDK:fast-tests / mcslock_autotest OK 2.62s
61/112 DPDK:fast-tests / member_autotest OK 1.52s
62/112 DPDK:fast-tests / memcpy_autotest OK 6.93s
63/112 DPDK:fast-tests / memory_autotest OK 0.12s
64/112 DPDK:fast-tests / mempool_autotest OK 0.47s
65/112 DPDK:fast-tests / memzone_autotest OK 0.17s
66/112 DPDK:fast-tests / meter_autotest OK 0.32s
67/112 DPDK:fast-tests / metrics_autotest OK 0.32s
68/112 DPDK:fast-tests / multiprocess_autotest FAIL 0.42s exit status 255
69/112 DPDK:fast-tests / net_ether_autotest OK 1.02s
70/112 DPDK:fast-tests / pcapng_autotest OK 5.78s
71/112 DPDK:fast-tests / pdcp_autotest SKIP 0.07s exit status 77
72/112 DPDK:fast-tests / pdump_autotest OK 0.47s
73/112 DPDK:fast-tests / per_lcore_autotest OK 0.42s
74/112 DPDK:fast-tests / pflock_autotest OK 1.17s
75/112 DPDK:fast-tests / pie_autotest OK 0.37s
76/112 DPDK:fast-tests / ring_pmd_autotest OK 0.37s
77/112 DPDK:fast-tests / power_autotest OK 0.32s
78/112 DPDK:fast-tests / power_cpufreq_autotest SKIP 0.07s exit status 77
79/112 DPDK:fast-tests / power_intel_uncore_autotest SKIP 0.32s exit status 77
80/112 DPDK:fast-tests / power_kvm_vm_autotest SKIP 0.07s exit status 77
81/112 DPDK:fast-tests / prefetch_autotest OK 0.32s
82/112 DPDK:fast-tests / rawdev_autotest OK 0.32s
83/112 DPDK:fast-tests / rcu_qsbr_autotest OK 0.87s
84/112 DPDK:fast-tests / reorder_autotest OK 0.42s
85/112 DPDK:fast-tests / rib_autotest OK 8.99s
86/112 DPDK:fast-tests / rib6_autotest OK 9.04s
87/112 DPDK:fast-tests / ring_autotest OK 0.37s
88/112 DPDK:fast-tests / rwlock_test1_autotest OK 1.12s
89/112 DPDK:fast-tests / rwlock_rda_autotest OK 5.33s
90/112 DPDK:fast-tests / rwlock_rds_wrm_autotest OK 5.33s
91/112 DPDK:fast-tests / rwlock_rde_wro_autotest OK 5.33s
92/112 DPDK:fast-tests / sched_autotest OK 0.32s
93/112 DPDK:fast-tests / security_autotest OK 0.07s
94/112 DPDK:fast-tests / seqlock_autotest OK 2.32s
95/112 DPDK:fast-tests / service_autotest OK 3.07s
96/112 DPDK:fast-tests / spinlock_autotest OK 0.42s
97/112 DPDK:fast-tests / stack_autotest OK 0.87s
98/112 DPDK:fast-tests / stack_lf_autotest SKIP 0.07s exit status 77
99/112 DPDK:fast-tests / string_autotest OK 0.32s
100/112 DPDK:fast-tests / table_autotest OK 7.69s
101/112 DPDK:fast-tests / tailq_autotest OK 0.32s
102/112 DPDK:fast-tests / telemetry_data_autotest OK 0.32s
103/112 DPDK:fast-tests / telemetry_json_autotest OK 0.32s
104/112 DPDK:fast-tests / thash_autotest OK 0.32s
105/112 DPDK:fast-tests / threads_autotest OK 0.52s
106/112 DPDK:fast-tests / ticketlock_autotest OK 0.47s
107/112 DPDK:fast-tests / timer_autotest OK 3.92s
108/112 DPDK:fast-tests / trace_autotest OK 0.32s
109/112 DPDK:fast-tests / trace_autotest_with_traces OK 0.37s
110/112 DPDK:fast-tests / vdev_autotest OK 0.32s
111/112 DPDK:fast-tests / version_autotest OK 0.32s
112/112 DPDK:fast-tests / telemetry_all OK 1.32s
Ok: 95
Expected Fail: 0
Fail: 10
Unexpected Pass: 0
Skipped: 7
Timeout: 0
Test logs for failed test cases:
================================================================================
DPDK:fast-tests / eal_flags_c_opt_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_c_opt_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary'
Error - process did not run ok when missing -c flag
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config
================================================================================
DPDK:fast-tests / eal_flags_main_opt_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_main_opt_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-timestamp Timestamp log output
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' '-1'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-timestamp Timestamp log output
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' 'X'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-timestamp Timestamp log output
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' '2'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-timestamp Timestamp log output
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' '1'
Error - process did not run ok with valid --main-lcore
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
/home/zhoumin/gh_dpdk/build/app/dpdk-test: option '--main-lcore' requires an argument
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid parameter for --main-lcore
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid parameter for --main-lcore
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Main lcore is not enabled for DPDK
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config
================================================================================
DPDK:fast-tests / eal_flags_hpet_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_hpet_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--no-hpet'
Error - process did not run ok with --no-hpet flag
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config
================================================================================
DPDK:fast-tests / eal_flags_a_opt_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_a_opt_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' 'error' '' ''
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '0:0:0' '' ''
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '0:error:0.1' '' ''
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '0:0:0.1error' '' ''
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' 'error0:0:0.1' '' ''
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '0:0:0.1.2' '' ''
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '00FF:09:0B.3'
Error - process did not run ok with valid allow
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "error"
EAL: Unable to parse device 'error'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:0:0"
EAL: Unable to parse device '0:0:0'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:error:0.1"
EAL: Unable to parse device '0:error:0.1'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:0:0.1error"
EAL: Unable to parse device '0:0:0.1error'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "error0:0:0.1"
EAL: Unable to parse device 'error0:0:0.1'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:0:0.1.2"
EAL: Unable to parse device '0:0:0.1.2'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config
================================================================================
DPDK:fast-tests / eal_flags_b_opt_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_b_opt_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' 'error'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' '0:0:0'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' '0:error:0.1'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' '0:0:0.1error'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' 'error0:0:0.1'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' '0:0:0.1.2'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' 'FF:09:0B.3'
Error - process did not run ok with valid blocklist value
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "error"
EAL: Unable to parse device 'error'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:0:0"
EAL: Unable to parse device '0:0:0'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:error:0.1"
EAL: Unable to parse device '0:error:0.1'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:0:0.1error"
EAL: Unable to parse device '0:0:0.1error'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "error0:0:0.1"
EAL: Unable to parse device 'error0:0:0.1'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:0:0.1.2"
EAL: Unable to parse device '0:0:0.1.2'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config
================================================================================
DPDK:fast-tests / eal_flags_r_opt_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_r_opt_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' 'error'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-timestamp Timestamp log output
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' '0'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-timestamp Timestamp log output
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' '-1'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-timestamp Timestamp log output
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' '17'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-timestamp Timestamp log output
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' '16'
Error - process did not run ok with valid -r (rank) value
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid rank number
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid rank number
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid rank number
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid rank number
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config
================================================================================
DPDK:fast-tests / eal_flags_mem_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_mem_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-m' '18'
Error - secondary process failed with valid -m flag !
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config
================================================================================
DPDK:fast-tests / eal_flags_file_prefix_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_file_prefix_autotest
Error - hugepage files for . were not created!
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
================================================================================
DPDK:fast-tests / eal_flags_misc_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_misc_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--invalid-opt'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-timestamp Timestamp log output
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--no-pci'
Error - process did not run ok with --no-pci flag
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
/home/zhoumin/gh_dpdk/build/app/dpdk-test: unrecognized option '--invalid-opt'
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config
================================================================================
DPDK:fast-tests / multiprocess_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>multiprocess_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=secondary' '--file-prefix=.'
### Testing rte_mp_disable() reject:
Error: rte_mp_disable() has been accepted
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=auto' '--file-prefix=.'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=secondary' '--file-prefix=.'
IN SECONDARY PROCESS
### Testing object creation - expect lots of mz reserve errors!
# Checked rte_memzone_reserve() OK
# Checked rte_ring_create() OK
# Checked rte_mempool_create() OK
# Checked rte_hash_create() OK
# Checked rte_fbk_hash_create() OK
# Checked rte_lpm_create() OK
### Testing rte_mp_disable() reject:
# Checked rte_mp_disable() is refused
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=auto' '--file-prefix=.'
IN SECONDARY PROCESS
### Testing object creation - expect lots of mz reserve errors!
# Checked rte_memzone_reserve() OK
# Checked rte_ring_create() OK
# Checked rte_mempool_create() OK
# Checked rte_hash_create() OK
# Checked rte_fbk_hash_create() OK
# Checked rte_lpm_create() OK
### Testing rte_mp_disable() reject:
# Checked rte_mp_disable() is refused
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=ERROR' '--file-prefix=.'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-timestamp Timestamp log output
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
### Testing rte_mp_disable() reject:
# Checked rte_mp_disable() is refused
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=secondary' '--file-prefix=ERROR'
### Testing rte_mp_disable() reject:
# Checked rte_mp_disable() is refused
### Testing rte_mp_disable() reject:
Error: rte_mp_disable() has been accepted
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=ERROR' '--file-prefix=.'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-timestamp Timestamp log output
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
### Testing rte_mp_disable() reject:
Error: rte_mp_disable() has been accepted
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=secondary' '--file-prefix=ERROR'
### Testing rte_mp_disable() reject:
Error: rte_mp_disable() has been accepted
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Auto-detected process type: PRIMARY
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/./mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/./mp_socket_2765062_1f3f662740f73
EAL: Selected IOVA mode 'PA'
HASH: rte_hash_create has invalid parameters
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Auto-detected process type: SECONDARY
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/./mp_socket_2765065_1f3f662b98d0d
EAL: Selected IOVA mode 'PA'
RING: Cannot reserve memory
HASH: rte_hash_create has invalid parameters
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Invalid process type specified
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/ERROR/config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Invalid process type specified
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/ERROR/config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config
^ permalink raw reply [flat|nested] 4+ messages in thread