From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id 9D79C43CE8 for ; Mon, 18 Mar 2024 19:39:46 +0100 (CET) Received: from mails.dpdk.org (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 97C0040289; Mon, 18 Mar 2024 19:39:46 +0100 (CET) Received: from mail.loongson.cn (mail.loongson.cn [114.242.206.163]) by mails.dpdk.org (Postfix) with ESMTP id 029274027F for ; Mon, 18 Mar 2024 19:39:43 +0100 (CET) Received: from loongson.cn (unknown [192.168.100.1]) by gateway (Coremail) with SMTP id _____8BxefBsivhloXcaAA--.64726S3; Tue, 19 Mar 2024 02:39:40 +0800 (CST) Received: from localhost.localdomain (unknown [192.168.100.1]) by localhost.localdomain (Coremail) with SMTP id AQAAf8DxDc9qivhlC81cAA--.47547S3; Tue, 19 Mar 2024 02:39:38 +0800 (CST) Received: from localhost.localdomain (localhost.localdomain [127.0.0.1]) by localhost.localdomain (8.15.2/8.15.2) with ESMTPS id 42IIEmTZ2765686 (version=TLSv1.3 cipher=TLS_AES_256_GCM_SHA384 bits=256 verify=NOT); Tue, 19 Mar 2024 02:14:49 +0800 Received: (from root@localhost) by localhost.localdomain (8.15.2/8.15.2/Submit) id 42IIElnO2765685; Tue, 19 Mar 2024 02:14:47 +0800 Date: Tue, 19 Mar 2024 02:14:47 +0800 From: qemudev@loongson.cn Message-Id: <202403181814.42IIElnO2765685@localhost.localdomain> Content-Type: text/plain; charset="utf-8" Subject: |FAILURE| pw138466-138470 [PATCH v8 5/5] eal: initialize logging before plugins In-Reply-To: <20240318183233.142330-6-stephen@networkplumber.org> References: <20240318183233.142330-6-stephen@networkplumber.org> To: test-report@dpdk.org Cc: Stephen Hemminger , zhoumin@loongson.cn X-CM-TRANSID: AQAAf8DxDc9qivhlC81cAA--.47547S3 Authentication-Results: localhost.localdomain; spf=neutral smtp.mail=q emudev@loongson.cn; X-CM-SenderInfo: pthp3vthy6z05rqj20fqof0/1tbiAQAQD2XytWcEWwBNsJ X-Coremail-Antispam: 1Uk129KBj9fXoWDZr45GryxZw4kKrW3Kry5ZFc_yoW3WF1DAo WI9r4Fkw18Gr43GF1vkrn7Gr15WFyqqF95AryrGFn8Gr42gF4UGrW7C347Wry5JF45Xa43 AFyxJr17Jr12vFZ3l-sFpf9Il3svdjkaLaAFLSUrUUUUUb8apTn2vfkv8UJUUUU8wcxFpf 9Il3svdxBIdaVrn0xqx4xG64xvF2IEw4CE5I8CrVC2j2Jv73VFW2AGmfu7bjvjm3AaLaJ3 UjIYCTnIWjp_UUU5i7kC6x804xWl14x267AKxVWUJVW8JwAFc2x0x2IEx4CE42xK8VAvwI 8IcIk0rVWrJVCq3wAFIxvE14AKwVWUJVWUGwA2ocxC64kIII0Yj41l84x0c7CEw4AK67xG Y2AK021l84ACjcxK6xIIjxv20xvE14v26r1j6r1xM28EF7xvwVC0I7IYx2IY6xkF7I0E14 v26r1j6r4UM28EF7xvwVC2z280aVAFwI0_Gr0_Cr1l84ACjcxK6I8E87Iv6xkF7I0E14v2 6r4j6r4UJwAS0I0E0xvYzxvE52x082IY62kv0487Mc804VCY07AIYIkI8VC2zVCFFI0UMc 02F40EFcxC0VAKzVAqx4xG6I80ewAv7VC0I7IYx2IY67AKxVWUGVWUXwAv7VC2z280aVAF wI0_Gr0_Cr1lOx8S6xCaFVCjc4AY6r1j6r4UM4kE6xkIj40Ew7xC0wCF04k20xvY0x0EwI xGrwCFx2IqxVCFs4IE7xkEbVWUJVW8JwC20s026c02F40E14v26r1j6r18MI8I3I0E7480 Y4vE14v26r106r1rMI8E67AF67kF1VAFwI0_Jrv_JF1lIxkGc2Ij64vIr41lIxAIcVC0I7 IYx2IY67AKxVWUJVWUCwCI42IY6xIIjxv20xvEc7CjxVAFwI0_Jr0_Gr1lIxAIcVCF04k2 6cxKx2IYs7xG6r1j6r1xMIIF0xvEx4A2jsIE14v26r1j6r4UMIIF0xvEx4A2jsIEc7CjxV AFwI0_Jr0_GrUvcSsGvfC2KfnxnUUI43ZEXa7IU88pnPUUUUU== X-BeenThere: test-report@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: automatic DPDK test reports List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: test-report-bounces@dpdk.org Test-Label: loongarch-unit-testing Test-Status: FAILURE http://dpdk.org/patch/138470 _Unit Testing FAIL_ Submitter: Stephen Hemminger Date: Mon, 18 Mar 2024 11:30:02 -0700 DPDK git baseline: Repo:dpdk Branch: main CommitID: 80ecef6d1f71fcebc0a51d7cabc51f73ee142ff2 138466-138470 --> testing fail Test environment and result as below: +---------------------+----------------+ | Environment | dpdk_unit_test | +---------------------+----------------+ | Loongnix-Server 8.3 | FAIL | +---------------------+----------------+ Loongnix-Server 8.3 Kernel: 4.19.190+ Compiler: gcc 8.3 Test result details: 1/112 DPDK:fast-tests / acl_autotest OK 3.17s 2/112 DPDK:fast-tests / argparse_autotest OK 0.42s 3/112 DPDK:fast-tests / atomic_autotest OK 8.63s 4/112 DPDK:fast-tests / bitcount_autotest OK 0.32s 5/112 DPDK:fast-tests / bitmap_autotest OK 0.32s 6/112 DPDK:fast-tests / bitops_autotest OK 0.32s 7/112 DPDK:fast-tests / bitratestats_autotest OK 0.32s 8/112 DPDK:fast-tests / bpf_autotest OK 0.32s 9/112 DPDK:fast-tests / bpf_convert_autotest OK 0.32s 10/112 DPDK:fast-tests / byteorder_autotest OK 0.32s 11/112 DPDK:fast-tests / cksum_autotest OK 0.32s 12/112 DPDK:fast-tests / cmdline_autotest OK 0.32s 13/112 DPDK:fast-tests / common_autotest OK 1.17s 14/112 DPDK:fast-tests / compressdev_autotest SKIP 0.12s exit status 77 15/112 DPDK:fast-tests / cpuflags_autotest OK 0.32s 16/112 DPDK:fast-tests / crc_autotest OK 0.32s 17/112 DPDK:fast-tests / user_delay_us OK 0.32s 18/112 DPDK:fast-tests / debug_autotest OK 20.86s 19/112 DPDK:fast-tests / devargs_autotest OK 0.42s 20/112 DPDK:fast-tests / dispatcher_autotest OK 2.47s 21/112 DPDK:fast-tests / distributor_autotest OK 1.22s 22/112 DPDK:fast-tests / eal_flags_c_opt_autotest FAIL 0.12s exit status 255 23/112 DPDK:fast-tests / eal_flags_main_opt_autotest FAIL 0.27s exit status 255 24/112 DPDK:fast-tests / eal_flags_n_opt_autotest OK 0.27s 25/112 DPDK:fast-tests / eal_flags_hpet_autotest FAIL 0.12s exit status 255 26/112 DPDK:fast-tests / eal_flags_no_huge_autotest OK 0.32s 27/112 DPDK:fast-tests / eal_flags_a_opt_autotest FAIL 0.37s exit status 255 28/112 DPDK:fast-tests / eal_flags_b_opt_autotest FAIL 0.37s exit status 255 29/112 DPDK:fast-tests / eal_flags_vdev_opt_autotest OK 0.27s 30/112 DPDK:fast-tests / eal_flags_r_opt_autotest FAIL 0.27s exit status 255 31/112 DPDK:fast-tests / eal_flags_mem_autotest FAIL 0.12s exit status 255 32/112 DPDK:fast-tests / eal_flags_file_prefix_autotest FAIL 0.07s exit status 255 33/112 DPDK:fast-tests / eal_flags_misc_autotest FAIL 0.17s exit status 255 34/112 DPDK:fast-tests / eal_fs_autotest OK 0.32s 35/112 DPDK:fast-tests / errno_autotest OK 0.32s 36/112 DPDK:fast-tests / ethdev_link_status OK 0.32s 37/112 DPDK:fast-tests / event_eth_tx_adapter_autotest OK 1.72s 38/112 DPDK:fast-tests / event_ring_autotest OK 0.32s 39/112 DPDK:fast-tests / eventdev_common_autotest OK 0.32s 40/112 DPDK:fast-tests / eventdev_selftest_sw OK 7.28s 41/112 DPDK:fast-tests / fbarray_autotest OK 0.32s 42/112 DPDK:fast-tests / fib_autotest OK 1.02s 43/112 DPDK:fast-tests / fib6_autotest OK 1.07s 44/112 DPDK:fast-tests / func_reentrancy_autotest OK 2.23s 45/112 DPDK:fast-tests / graph_autotest OK 0.32s 46/112 DPDK:fast-tests / node_list_dump OK 0.32s 47/112 DPDK:fast-tests / hash_autotest OK 1.27s 48/112 DPDK:fast-tests / hash_readwrite_func_autotest OK 6.43s 49/112 DPDK:fast-tests / interrupt_autotest OK 1.62s 50/112 DPDK:fast-tests / ipfrag_autotest OK 0.12s 51/112 DPDK:fast-tests / ipsec_autotest SKIP 0.32s exit status 77 52/112 DPDK:fast-tests / kvargs_autotest OK 0.32s 53/112 DPDK:fast-tests / latencystats_autotest OK 0.37s 54/112 DPDK:fast-tests / lcores_autotest OK 5.38s 55/112 DPDK:fast-tests / logs_autotest OK 0.32s 56/112 DPDK:fast-tests / lpm_autotest OK 2.38s 57/112 DPDK:fast-tests / lpm6_autotest OK 5.53s 58/112 DPDK:fast-tests / malloc_autotest OK 60.45s 59/112 DPDK:fast-tests / mbuf_autotest OK 5.33s 60/112 DPDK:fast-tests / mcslock_autotest OK 2.62s 61/112 DPDK:fast-tests / member_autotest OK 1.52s 62/112 DPDK:fast-tests / memcpy_autotest OK 6.93s 63/112 DPDK:fast-tests / memory_autotest OK 0.12s 64/112 DPDK:fast-tests / mempool_autotest OK 0.47s 65/112 DPDK:fast-tests / memzone_autotest OK 0.17s 66/112 DPDK:fast-tests / meter_autotest OK 0.32s 67/112 DPDK:fast-tests / metrics_autotest OK 0.32s 68/112 DPDK:fast-tests / multiprocess_autotest FAIL 0.42s exit status 255 69/112 DPDK:fast-tests / net_ether_autotest OK 1.02s 70/112 DPDK:fast-tests / pcapng_autotest OK 5.78s 71/112 DPDK:fast-tests / pdcp_autotest SKIP 0.07s exit status 77 72/112 DPDK:fast-tests / pdump_autotest OK 0.47s 73/112 DPDK:fast-tests / per_lcore_autotest OK 0.42s 74/112 DPDK:fast-tests / pflock_autotest OK 1.17s 75/112 DPDK:fast-tests / pie_autotest OK 0.37s 76/112 DPDK:fast-tests / ring_pmd_autotest OK 0.37s 77/112 DPDK:fast-tests / power_autotest OK 0.32s 78/112 DPDK:fast-tests / power_cpufreq_autotest SKIP 0.07s exit status 77 79/112 DPDK:fast-tests / power_intel_uncore_autotest SKIP 0.32s exit status 77 80/112 DPDK:fast-tests / power_kvm_vm_autotest SKIP 0.07s exit status 77 81/112 DPDK:fast-tests / prefetch_autotest OK 0.32s 82/112 DPDK:fast-tests / rawdev_autotest OK 0.32s 83/112 DPDK:fast-tests / rcu_qsbr_autotest OK 0.87s 84/112 DPDK:fast-tests / reorder_autotest OK 0.42s 85/112 DPDK:fast-tests / rib_autotest OK 8.99s 86/112 DPDK:fast-tests / rib6_autotest OK 9.04s 87/112 DPDK:fast-tests / ring_autotest OK 0.37s 88/112 DPDK:fast-tests / rwlock_test1_autotest OK 1.12s 89/112 DPDK:fast-tests / rwlock_rda_autotest OK 5.33s 90/112 DPDK:fast-tests / rwlock_rds_wrm_autotest OK 5.33s 91/112 DPDK:fast-tests / rwlock_rde_wro_autotest OK 5.33s 92/112 DPDK:fast-tests / sched_autotest OK 0.32s 93/112 DPDK:fast-tests / security_autotest OK 0.07s 94/112 DPDK:fast-tests / seqlock_autotest OK 2.32s 95/112 DPDK:fast-tests / service_autotest OK 3.07s 96/112 DPDK:fast-tests / spinlock_autotest OK 0.42s 97/112 DPDK:fast-tests / stack_autotest OK 0.87s 98/112 DPDK:fast-tests / stack_lf_autotest SKIP 0.07s exit status 77 99/112 DPDK:fast-tests / string_autotest OK 0.32s 100/112 DPDK:fast-tests / table_autotest OK 7.69s 101/112 DPDK:fast-tests / tailq_autotest OK 0.32s 102/112 DPDK:fast-tests / telemetry_data_autotest OK 0.32s 103/112 DPDK:fast-tests / telemetry_json_autotest OK 0.32s 104/112 DPDK:fast-tests / thash_autotest OK 0.32s 105/112 DPDK:fast-tests / threads_autotest OK 0.52s 106/112 DPDK:fast-tests / ticketlock_autotest OK 0.47s 107/112 DPDK:fast-tests / timer_autotest OK 3.92s 108/112 DPDK:fast-tests / trace_autotest OK 0.32s 109/112 DPDK:fast-tests / trace_autotest_with_traces OK 0.37s 110/112 DPDK:fast-tests / vdev_autotest OK 0.32s 111/112 DPDK:fast-tests / version_autotest OK 0.32s 112/112 DPDK:fast-tests / telemetry_all OK 1.32s Ok: 95 Expected Fail: 0 Fail: 10 Unexpected Pass: 0 Skipped: 7 Timeout: 0 Test logs for failed test cases: ================================================================================ DPDK:fast-tests / eal_flags_c_opt_autotest: FAIL ================================================================================ -------------------------------------stdout------------------------------------- RTE>>eal_flags_c_opt_autotest Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' Error - process did not run ok when missing -c flag Test Failed RTE>> -------------------------------------stderr------------------------------------- EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'PA' TELEMETRY: No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config EAL: FATAL: Cannot init config EAL: Cannot init config ================================================================================ DPDK:fast-tests / eal_flags_main_opt_autotest: FAIL ================================================================================ -------------------------------------stdout------------------------------------- RTE>>eal_flags_main_opt_autotest Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options] EAL common options: -c COREMASK Hexadecimal bitmask of cores to run on -l CORELIST List of cores to run on The argument format is [-c2][,c3[-c4],...] where c1, c2, etc are core indexes between 0 and 64 --lcores COREMAP Map lcore set to physical cpu set The argument format is '[<,lcores[@cpus]>...]' lcores and cpus list are grouped by '(' and ')' Within the group, '-' is used for range separator, ',' is used for single number separator. '( )' can be omitted for single element group, '@' can be omitted if cpus and lcores have the same value -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores --main-lcore ID Core ID that is used as main --mbuf-pool-ops-name Pool ops name for mbuf to use -n CHANNELS Number of memory channels -m MB Memory to allocate (see also --socket-mem) -r RANKS Force number of memory ranks (don't detect) -b, --block Add a device to the blocked list. Prevent EAL from using this device. The argument format for PCI devices is . -a, --allow Add a device to the allow list. Only use the specified devices. The argument format for PCI devices is <[domain:]bus:devid.func>. This option can be present several times. [NOTE: allow cannot be used with block option] --vdev Add a virtual device. The argument format is [,key=val,...] (ex: --vdev=net_pcap0,iface=eth2). --iova-mode Set IOVA mode. 'pa' for IOVA_PA 'va' for IOVA_VA -d LIB.so|DIR Add a driver or driver directory (can be used multiple times) --vmware-tsc-map Use VMware TSC map instead of native RDTSC --proc-type Type of this process (primary|secondary|auto) --syslog Set syslog facility --log-timestamp Timestamp log output --log-level= Set global log level --log-level=: Set specific log level --log-level=help Show log types and levels --trace= Enable trace based on regular expression trace name. By default, the trace is disabled. User must specify this option to enable trace. --trace-dir= Specify trace directory for trace output. By default, trace output will created at $HOME directory and parameter must be specified once only. --trace-bufsz= Specify maximum size of allocated memory for trace output for each thread. Valid unit can be either 'B|K|M' for 'Bytes', 'KBytes' and 'MBytes' respectively. Default is 1MB and parameter must be specified once only. --trace-mode= Specify the mode of update of trace output file. Either update on a file can be wrapped or discarded when file size reaches its maximum limit. Default mode is 'overwrite' and parameter must be specified once only. -v Display version information on startup -h, --help This help --in-memory Operate entirely in memory. This will disable secondary process support --base-virtaddr Base virtual address --telemetry Enable telemetry support (on by default) --no-telemetry Disable telemetry support --force-max-simd-bitwidth Force the max SIMD bitwidth EAL options for DEBUG use only: --huge-unlink[=existing|always|never] When to unlink files in hugetlbfs ('existing' by default, no value means 'always') --no-huge Use malloc instead of hugetlbfs --no-pci Disable PCI --no-hpet Disable HPET --no-shconf No shared config (mmap'd files) EAL Linux options: --socket-mem Memory to allocate on sockets (comma separated values) --socket-limit Limit memory allocation on sockets (comma separated values) --huge-dir Directory where hugetlbfs is mounted --file-prefix Prefix for hugepage filenames --create-uio-dev Create /dev/uioX (usually done by hotplug) --vfio-intr Interrupt mode for VFIO (legacy|msi|msix) --vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs --legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments) --single-file-segments Put all hugepage memory in single files --match-allocations Free hugepages exactly as allocated --huge-worker-stack[=size] Allocate worker thread stacks from hugepage memory. Size is in units of kbytes and defaults to system thread stack size if not specified. Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' '-1' Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options] EAL common options: -c COREMASK Hexadecimal bitmask of cores to run on -l CORELIST List of cores to run on The argument format is [-c2][,c3[-c4],...] where c1, c2, etc are core indexes between 0 and 64 --lcores COREMAP Map lcore set to physical cpu set The argument format is '[<,lcores[@cpus]>...]' lcores and cpus list are grouped by '(' and ')' Within the group, '-' is used for range separator, ',' is used for single number separator. '( )' can be omitted for single element group, '@' can be omitted if cpus and lcores have the same value -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores --main-lcore ID Core ID that is used as main --mbuf-pool-ops-name Pool ops name for mbuf to use -n CHANNELS Number of memory channels -m MB Memory to allocate (see also --socket-mem) -r RANKS Force number of memory ranks (don't detect) -b, --block Add a device to the blocked list. Prevent EAL from using this device. The argument format for PCI devices is . -a, --allow Add a device to the allow list. Only use the specified devices. The argument format for PCI devices is <[domain:]bus:devid.func>. This option can be present several times. [NOTE: allow cannot be used with block option] --vdev Add a virtual device. The argument format is [,key=val,...] (ex: --vdev=net_pcap0,iface=eth2). --iova-mode Set IOVA mode. 'pa' for IOVA_PA 'va' for IOVA_VA -d LIB.so|DIR Add a driver or driver directory (can be used multiple times) --vmware-tsc-map Use VMware TSC map instead of native RDTSC --proc-type Type of this process (primary|secondary|auto) --syslog Set syslog facility --log-timestamp Timestamp log output --log-level= Set global log level --log-level=: Set specific log level --log-level=help Show log types and levels --trace= Enable trace based on regular expression trace name. By default, the trace is disabled. User must specify this option to enable trace. --trace-dir= Specify trace directory for trace output. By default, trace output will created at $HOME directory and parameter must be specified once only. --trace-bufsz= Specify maximum size of allocated memory for trace output for each thread. Valid unit can be either 'B|K|M' for 'Bytes', 'KBytes' and 'MBytes' respectively. Default is 1MB and parameter must be specified once only. --trace-mode= Specify the mode of update of trace output file. Either update on a file can be wrapped or discarded when file size reaches its maximum limit. Default mode is 'overwrite' and parameter must be specified once only. -v Display version information on startup -h, --help This help --in-memory Operate entirely in memory. This will disable secondary process support --base-virtaddr Base virtual address --telemetry Enable telemetry support (on by default) --no-telemetry Disable telemetry support --force-max-simd-bitwidth Force the max SIMD bitwidth EAL options for DEBUG use only: --huge-unlink[=existing|always|never] When to unlink files in hugetlbfs ('existing' by default, no value means 'always') --no-huge Use malloc instead of hugetlbfs --no-pci Disable PCI --no-hpet Disable HPET --no-shconf No shared config (mmap'd files) EAL Linux options: --socket-mem Memory to allocate on sockets (comma separated values) --socket-limit Limit memory allocation on sockets (comma separated values) --huge-dir Directory where hugetlbfs is mounted --file-prefix Prefix for hugepage filenames --create-uio-dev Create /dev/uioX (usually done by hotplug) --vfio-intr Interrupt mode for VFIO (legacy|msi|msix) --vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs --legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments) --single-file-segments Put all hugepage memory in single files --match-allocations Free hugepages exactly as allocated --huge-worker-stack[=size] Allocate worker thread stacks from hugepage memory. Size is in units of kbytes and defaults to system thread stack size if not specified. Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' 'X' Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options] EAL common options: -c COREMASK Hexadecimal bitmask of cores to run on -l CORELIST List of cores to run on The argument format is [-c2][,c3[-c4],...] where c1, c2, etc are core indexes between 0 and 64 --lcores COREMAP Map lcore set to physical cpu set The argument format is '[<,lcores[@cpus]>...]' lcores and cpus list are grouped by '(' and ')' Within the group, '-' is used for range separator, ',' is used for single number separator. '( )' can be omitted for single element group, '@' can be omitted if cpus and lcores have the same value -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores --main-lcore ID Core ID that is used as main --mbuf-pool-ops-name Pool ops name for mbuf to use -n CHANNELS Number of memory channels -m MB Memory to allocate (see also --socket-mem) -r RANKS Force number of memory ranks (don't detect) -b, --block Add a device to the blocked list. Prevent EAL from using this device. The argument format for PCI devices is . -a, --allow Add a device to the allow list. Only use the specified devices. The argument format for PCI devices is <[domain:]bus:devid.func>. This option can be present several times. [NOTE: allow cannot be used with block option] --vdev Add a virtual device. The argument format is [,key=val,...] (ex: --vdev=net_pcap0,iface=eth2). --iova-mode Set IOVA mode. 'pa' for IOVA_PA 'va' for IOVA_VA -d LIB.so|DIR Add a driver or driver directory (can be used multiple times) --vmware-tsc-map Use VMware TSC map instead of native RDTSC --proc-type Type of this process (primary|secondary|auto) --syslog Set syslog facility --log-timestamp Timestamp log output --log-level= Set global log level --log-level=: Set specific log level --log-level=help Show log types and levels --trace= Enable trace based on regular expression trace name. By default, the trace is disabled. User must specify this option to enable trace. --trace-dir= Specify trace directory for trace output. By default, trace output will created at $HOME directory and parameter must be specified once only. --trace-bufsz= Specify maximum size of allocated memory for trace output for each thread. Valid unit can be either 'B|K|M' for 'Bytes', 'KBytes' and 'MBytes' respectively. Default is 1MB and parameter must be specified once only. --trace-mode= Specify the mode of update of trace output file. Either update on a file can be wrapped or discarded when file size reaches its maximum limit. Default mode is 'overwrite' and parameter must be specified once only. -v Display version information on startup -h, --help This help --in-memory Operate entirely in memory. This will disable secondary process support --base-virtaddr Base virtual address --telemetry Enable telemetry support (on by default) --no-telemetry Disable telemetry support --force-max-simd-bitwidth Force the max SIMD bitwidth EAL options for DEBUG use only: --huge-unlink[=existing|always|never] When to unlink files in hugetlbfs ('existing' by default, no value means 'always') --no-huge Use malloc instead of hugetlbfs --no-pci Disable PCI --no-hpet Disable HPET --no-shconf No shared config (mmap'd files) EAL Linux options: --socket-mem Memory to allocate on sockets (comma separated values) --socket-limit Limit memory allocation on sockets (comma separated values) --huge-dir Directory where hugetlbfs is mounted --file-prefix Prefix for hugepage filenames --create-uio-dev Create /dev/uioX (usually done by hotplug) --vfio-intr Interrupt mode for VFIO (legacy|msi|msix) --vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs --legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments) --single-file-segments Put all hugepage memory in single files --match-allocations Free hugepages exactly as allocated --huge-worker-stack[=size] Allocate worker thread stacks from hugepage memory. Size is in units of kbytes and defaults to system thread stack size if not specified. Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' '2' Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options] EAL common options: -c COREMASK Hexadecimal bitmask of cores to run on -l CORELIST List of cores to run on The argument format is [-c2][,c3[-c4],...] where c1, c2, etc are core indexes between 0 and 64 --lcores COREMAP Map lcore set to physical cpu set The argument format is '[<,lcores[@cpus]>...]' lcores and cpus list are grouped by '(' and ')' Within the group, '-' is used for range separator, ',' is used for single number separator. '( )' can be omitted for single element group, '@' can be omitted if cpus and lcores have the same value -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores --main-lcore ID Core ID that is used as main --mbuf-pool-ops-name Pool ops name for mbuf to use -n CHANNELS Number of memory channels -m MB Memory to allocate (see also --socket-mem) -r RANKS Force number of memory ranks (don't detect) -b, --block Add a device to the blocked list. Prevent EAL from using this device. The argument format for PCI devices is . -a, --allow Add a device to the allow list. Only use the specified devices. The argument format for PCI devices is <[domain:]bus:devid.func>. This option can be present several times. [NOTE: allow cannot be used with block option] --vdev Add a virtual device. The argument format is [,key=val,...] (ex: --vdev=net_pcap0,iface=eth2). --iova-mode Set IOVA mode. 'pa' for IOVA_PA 'va' for IOVA_VA -d LIB.so|DIR Add a driver or driver directory (can be used multiple times) --vmware-tsc-map Use VMware TSC map instead of native RDTSC --proc-type Type of this process (primary|secondary|auto) --syslog Set syslog facility --log-timestamp Timestamp log output --log-level= Set global log level --log-level=: Set specific log level --log-level=help Show log types and levels --trace= Enable trace based on regular expression trace name. By default, the trace is disabled. User must specify this option to enable trace. --trace-dir= Specify trace directory for trace output. By default, trace output will created at $HOME directory and parameter must be specified once only. --trace-bufsz= Specify maximum size of allocated memory for trace output for each thread. Valid unit can be either 'B|K|M' for 'Bytes', 'KBytes' and 'MBytes' respectively. Default is 1MB and parameter must be specified once only. --trace-mode= Specify the mode of update of trace output file. Either update on a file can be wrapped or discarded when file size reaches its maximum limit. Default mode is 'overwrite' and parameter must be specified once only. -v Display version information on startup -h, --help This help --in-memory Operate entirely in memory. This will disable secondary process support --base-virtaddr Base virtual address --telemetry Enable telemetry support (on by default) --no-telemetry Disable telemetry support --force-max-simd-bitwidth Force the max SIMD bitwidth EAL options for DEBUG use only: --huge-unlink[=existing|always|never] When to unlink files in hugetlbfs ('existing' by default, no value means 'always') --no-huge Use malloc instead of hugetlbfs --no-pci Disable PCI --no-hpet Disable HPET --no-shconf No shared config (mmap'd files) EAL Linux options: --socket-mem Memory to allocate on sockets (comma separated values) --socket-limit Limit memory allocation on sockets (comma separated values) --huge-dir Directory where hugetlbfs is mounted --file-prefix Prefix for hugepage filenames --create-uio-dev Create /dev/uioX (usually done by hotplug) --vfio-intr Interrupt mode for VFIO (legacy|msi|msix) --vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs --legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments) --single-file-segments Put all hugepage memory in single files --match-allocations Free hugepages exactly as allocated --huge-worker-stack[=size] Allocate worker thread stacks from hugepage memory. Size is in units of kbytes and defaults to system thread stack size if not specified. Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' '1' Error - process did not run ok with valid --main-lcore Test Failed RTE>> -------------------------------------stderr------------------------------------- EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'PA' TELEMETRY: No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 /home/zhoumin/gh_dpdk/build/app/dpdk-test: option '--main-lcore' requires an argument EAL: FATAL: Invalid 'command line' arguments. EAL: Invalid 'command line' arguments. EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: invalid parameter for --main-lcore EAL: FATAL: Invalid 'command line' arguments. EAL: Invalid 'command line' arguments. EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: invalid parameter for --main-lcore EAL: FATAL: Invalid 'command line' arguments. EAL: Invalid 'command line' arguments. EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Main lcore is not enabled for DPDK EAL: FATAL: Invalid 'command line' arguments. EAL: Invalid 'command line' arguments. EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config EAL: FATAL: Cannot init config EAL: Cannot init config ================================================================================ DPDK:fast-tests / eal_flags_hpet_autotest: FAIL ================================================================================ -------------------------------------stdout------------------------------------- RTE>>eal_flags_hpet_autotest Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--no-hpet' Error - process did not run ok with --no-hpet flag Test Failed RTE>> -------------------------------------stderr------------------------------------- EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'PA' TELEMETRY: No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config EAL: FATAL: Cannot init config EAL: Cannot init config ================================================================================ DPDK:fast-tests / eal_flags_a_opt_autotest: FAIL ================================================================================ -------------------------------------stdout------------------------------------- RTE>>eal_flags_a_opt_autotest Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' 'error' '' '' Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '0:0:0' '' '' Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '0:error:0.1' '' '' Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '0:0:0.1error' '' '' Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' 'error0:0:0.1' '' '' Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '0:0:0.1.2' '' '' Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '00FF:09:0B.3' Error - process did not run ok with valid allow Test Failed RTE>> -------------------------------------stderr------------------------------------- EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'PA' TELEMETRY: No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: failed to parse device "error" EAL: Unable to parse device 'error' EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: failed to parse device "0:0:0" EAL: Unable to parse device '0:0:0' EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: failed to parse device "0:error:0.1" EAL: Unable to parse device '0:error:0.1' EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: failed to parse device "0:0:0.1error" EAL: Unable to parse device '0:0:0.1error' EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: failed to parse device "error0:0:0.1" EAL: Unable to parse device 'error0:0:0.1' EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: failed to parse device "0:0:0.1.2" EAL: Unable to parse device '0:0:0.1.2' EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config EAL: FATAL: Cannot init config EAL: Cannot init config ================================================================================ DPDK:fast-tests / eal_flags_b_opt_autotest: FAIL ================================================================================ -------------------------------------stdout------------------------------------- RTE>>eal_flags_b_opt_autotest Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' 'error' Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' '0:0:0' Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' '0:error:0.1' Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' '0:0:0.1error' Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' 'error0:0:0.1' Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' '0:0:0.1.2' Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' 'FF:09:0B.3' Error - process did not run ok with valid blocklist value Test Failed RTE>> -------------------------------------stderr------------------------------------- EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'PA' TELEMETRY: No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: failed to parse device "error" EAL: Unable to parse device 'error' EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: failed to parse device "0:0:0" EAL: Unable to parse device '0:0:0' EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: failed to parse device "0:error:0.1" EAL: Unable to parse device '0:error:0.1' EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: failed to parse device "0:0:0.1error" EAL: Unable to parse device '0:0:0.1error' EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: failed to parse device "error0:0:0.1" EAL: Unable to parse device 'error0:0:0.1' EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: failed to parse device "0:0:0.1.2" EAL: Unable to parse device '0:0:0.1.2' EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config EAL: FATAL: Cannot init config EAL: Cannot init config ================================================================================ DPDK:fast-tests / eal_flags_r_opt_autotest: FAIL ================================================================================ -------------------------------------stdout------------------------------------- RTE>>eal_flags_r_opt_autotest Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' 'error' Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options] EAL common options: -c COREMASK Hexadecimal bitmask of cores to run on -l CORELIST List of cores to run on The argument format is [-c2][,c3[-c4],...] where c1, c2, etc are core indexes between 0 and 64 --lcores COREMAP Map lcore set to physical cpu set The argument format is '[<,lcores[@cpus]>...]' lcores and cpus list are grouped by '(' and ')' Within the group, '-' is used for range separator, ',' is used for single number separator. '( )' can be omitted for single element group, '@' can be omitted if cpus and lcores have the same value -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores --main-lcore ID Core ID that is used as main --mbuf-pool-ops-name Pool ops name for mbuf to use -n CHANNELS Number of memory channels -m MB Memory to allocate (see also --socket-mem) -r RANKS Force number of memory ranks (don't detect) -b, --block Add a device to the blocked list. Prevent EAL from using this device. The argument format for PCI devices is . -a, --allow Add a device to the allow list. Only use the specified devices. The argument format for PCI devices is <[domain:]bus:devid.func>. This option can be present several times. [NOTE: allow cannot be used with block option] --vdev Add a virtual device. The argument format is [,key=val,...] (ex: --vdev=net_pcap0,iface=eth2). --iova-mode Set IOVA mode. 'pa' for IOVA_PA 'va' for IOVA_VA -d LIB.so|DIR Add a driver or driver directory (can be used multiple times) --vmware-tsc-map Use VMware TSC map instead of native RDTSC --proc-type Type of this process (primary|secondary|auto) --syslog Set syslog facility --log-timestamp Timestamp log output --log-level= Set global log level --log-level=: Set specific log level --log-level=help Show log types and levels --trace= Enable trace based on regular expression trace name. By default, the trace is disabled. User must specify this option to enable trace. --trace-dir= Specify trace directory for trace output. By default, trace output will created at $HOME directory and parameter must be specified once only. --trace-bufsz= Specify maximum size of allocated memory for trace output for each thread. Valid unit can be either 'B|K|M' for 'Bytes', 'KBytes' and 'MBytes' respectively. Default is 1MB and parameter must be specified once only. --trace-mode= Specify the mode of update of trace output file. Either update on a file can be wrapped or discarded when file size reaches its maximum limit. Default mode is 'overwrite' and parameter must be specified once only. -v Display version information on startup -h, --help This help --in-memory Operate entirely in memory. This will disable secondary process support --base-virtaddr Base virtual address --telemetry Enable telemetry support (on by default) --no-telemetry Disable telemetry support --force-max-simd-bitwidth Force the max SIMD bitwidth EAL options for DEBUG use only: --huge-unlink[=existing|always|never] When to unlink files in hugetlbfs ('existing' by default, no value means 'always') --no-huge Use malloc instead of hugetlbfs --no-pci Disable PCI --no-hpet Disable HPET --no-shconf No shared config (mmap'd files) EAL Linux options: --socket-mem Memory to allocate on sockets (comma separated values) --socket-limit Limit memory allocation on sockets (comma separated values) --huge-dir Directory where hugetlbfs is mounted --file-prefix Prefix for hugepage filenames --create-uio-dev Create /dev/uioX (usually done by hotplug) --vfio-intr Interrupt mode for VFIO (legacy|msi|msix) --vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs --legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments) --single-file-segments Put all hugepage memory in single files --match-allocations Free hugepages exactly as allocated --huge-worker-stack[=size] Allocate worker thread stacks from hugepage memory. Size is in units of kbytes and defaults to system thread stack size if not specified. Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' '0' Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options] EAL common options: -c COREMASK Hexadecimal bitmask of cores to run on -l CORELIST List of cores to run on The argument format is [-c2][,c3[-c4],...] where c1, c2, etc are core indexes between 0 and 64 --lcores COREMAP Map lcore set to physical cpu set The argument format is '[<,lcores[@cpus]>...]' lcores and cpus list are grouped by '(' and ')' Within the group, '-' is used for range separator, ',' is used for single number separator. '( )' can be omitted for single element group, '@' can be omitted if cpus and lcores have the same value -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores --main-lcore ID Core ID that is used as main --mbuf-pool-ops-name Pool ops name for mbuf to use -n CHANNELS Number of memory channels -m MB Memory to allocate (see also --socket-mem) -r RANKS Force number of memory ranks (don't detect) -b, --block Add a device to the blocked list. Prevent EAL from using this device. The argument format for PCI devices is . -a, --allow Add a device to the allow list. Only use the specified devices. The argument format for PCI devices is <[domain:]bus:devid.func>. This option can be present several times. [NOTE: allow cannot be used with block option] --vdev Add a virtual device. The argument format is [,key=val,...] (ex: --vdev=net_pcap0,iface=eth2). --iova-mode Set IOVA mode. 'pa' for IOVA_PA 'va' for IOVA_VA -d LIB.so|DIR Add a driver or driver directory (can be used multiple times) --vmware-tsc-map Use VMware TSC map instead of native RDTSC --proc-type Type of this process (primary|secondary|auto) --syslog Set syslog facility --log-timestamp Timestamp log output --log-level= Set global log level --log-level=: Set specific log level --log-level=help Show log types and levels --trace= Enable trace based on regular expression trace name. By default, the trace is disabled. User must specify this option to enable trace. --trace-dir= Specify trace directory for trace output. By default, trace output will created at $HOME directory and parameter must be specified once only. --trace-bufsz= Specify maximum size of allocated memory for trace output for each thread. Valid unit can be either 'B|K|M' for 'Bytes', 'KBytes' and 'MBytes' respectively. Default is 1MB and parameter must be specified once only. --trace-mode= Specify the mode of update of trace output file. Either update on a file can be wrapped or discarded when file size reaches its maximum limit. Default mode is 'overwrite' and parameter must be specified once only. -v Display version information on startup -h, --help This help --in-memory Operate entirely in memory. This will disable secondary process support --base-virtaddr Base virtual address --telemetry Enable telemetry support (on by default) --no-telemetry Disable telemetry support --force-max-simd-bitwidth Force the max SIMD bitwidth EAL options for DEBUG use only: --huge-unlink[=existing|always|never] When to unlink files in hugetlbfs ('existing' by default, no value means 'always') --no-huge Use malloc instead of hugetlbfs --no-pci Disable PCI --no-hpet Disable HPET --no-shconf No shared config (mmap'd files) EAL Linux options: --socket-mem Memory to allocate on sockets (comma separated values) --socket-limit Limit memory allocation on sockets (comma separated values) --huge-dir Directory where hugetlbfs is mounted --file-prefix Prefix for hugepage filenames --create-uio-dev Create /dev/uioX (usually done by hotplug) --vfio-intr Interrupt mode for VFIO (legacy|msi|msix) --vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs --legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments) --single-file-segments Put all hugepage memory in single files --match-allocations Free hugepages exactly as allocated --huge-worker-stack[=size] Allocate worker thread stacks from hugepage memory. Size is in units of kbytes and defaults to system thread stack size if not specified. Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' '-1' Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options] EAL common options: -c COREMASK Hexadecimal bitmask of cores to run on -l CORELIST List of cores to run on The argument format is [-c2][,c3[-c4],...] where c1, c2, etc are core indexes between 0 and 64 --lcores COREMAP Map lcore set to physical cpu set The argument format is '[<,lcores[@cpus]>...]' lcores and cpus list are grouped by '(' and ')' Within the group, '-' is used for range separator, ',' is used for single number separator. '( )' can be omitted for single element group, '@' can be omitted if cpus and lcores have the same value -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores --main-lcore ID Core ID that is used as main --mbuf-pool-ops-name Pool ops name for mbuf to use -n CHANNELS Number of memory channels -m MB Memory to allocate (see also --socket-mem) -r RANKS Force number of memory ranks (don't detect) -b, --block Add a device to the blocked list. Prevent EAL from using this device. The argument format for PCI devices is . -a, --allow Add a device to the allow list. Only use the specified devices. The argument format for PCI devices is <[domain:]bus:devid.func>. This option can be present several times. [NOTE: allow cannot be used with block option] --vdev Add a virtual device. The argument format is [,key=val,...] (ex: --vdev=net_pcap0,iface=eth2). --iova-mode Set IOVA mode. 'pa' for IOVA_PA 'va' for IOVA_VA -d LIB.so|DIR Add a driver or driver directory (can be used multiple times) --vmware-tsc-map Use VMware TSC map instead of native RDTSC --proc-type Type of this process (primary|secondary|auto) --syslog Set syslog facility --log-timestamp Timestamp log output --log-level= Set global log level --log-level=: Set specific log level --log-level=help Show log types and levels --trace= Enable trace based on regular expression trace name. By default, the trace is disabled. User must specify this option to enable trace. --trace-dir= Specify trace directory for trace output. By default, trace output will created at $HOME directory and parameter must be specified once only. --trace-bufsz= Specify maximum size of allocated memory for trace output for each thread. Valid unit can be either 'B|K|M' for 'Bytes', 'KBytes' and 'MBytes' respectively. Default is 1MB and parameter must be specified once only. --trace-mode= Specify the mode of update of trace output file. Either update on a file can be wrapped or discarded when file size reaches its maximum limit. Default mode is 'overwrite' and parameter must be specified once only. -v Display version information on startup -h, --help This help --in-memory Operate entirely in memory. This will disable secondary process support --base-virtaddr Base virtual address --telemetry Enable telemetry support (on by default) --no-telemetry Disable telemetry support --force-max-simd-bitwidth Force the max SIMD bitwidth EAL options for DEBUG use only: --huge-unlink[=existing|always|never] When to unlink files in hugetlbfs ('existing' by default, no value means 'always') --no-huge Use malloc instead of hugetlbfs --no-pci Disable PCI --no-hpet Disable HPET --no-shconf No shared config (mmap'd files) EAL Linux options: --socket-mem Memory to allocate on sockets (comma separated values) --socket-limit Limit memory allocation on sockets (comma separated values) --huge-dir Directory where hugetlbfs is mounted --file-prefix Prefix for hugepage filenames --create-uio-dev Create /dev/uioX (usually done by hotplug) --vfio-intr Interrupt mode for VFIO (legacy|msi|msix) --vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs --legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments) --single-file-segments Put all hugepage memory in single files --match-allocations Free hugepages exactly as allocated --huge-worker-stack[=size] Allocate worker thread stacks from hugepage memory. Size is in units of kbytes and defaults to system thread stack size if not specified. Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' '17' Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options] EAL common options: -c COREMASK Hexadecimal bitmask of cores to run on -l CORELIST List of cores to run on The argument format is [-c2][,c3[-c4],...] where c1, c2, etc are core indexes between 0 and 64 --lcores COREMAP Map lcore set to physical cpu set The argument format is '[<,lcores[@cpus]>...]' lcores and cpus list are grouped by '(' and ')' Within the group, '-' is used for range separator, ',' is used for single number separator. '( )' can be omitted for single element group, '@' can be omitted if cpus and lcores have the same value -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores --main-lcore ID Core ID that is used as main --mbuf-pool-ops-name Pool ops name for mbuf to use -n CHANNELS Number of memory channels -m MB Memory to allocate (see also --socket-mem) -r RANKS Force number of memory ranks (don't detect) -b, --block Add a device to the blocked list. Prevent EAL from using this device. The argument format for PCI devices is . -a, --allow Add a device to the allow list. Only use the specified devices. The argument format for PCI devices is <[domain:]bus:devid.func>. This option can be present several times. [NOTE: allow cannot be used with block option] --vdev Add a virtual device. The argument format is [,key=val,...] (ex: --vdev=net_pcap0,iface=eth2). --iova-mode Set IOVA mode. 'pa' for IOVA_PA 'va' for IOVA_VA -d LIB.so|DIR Add a driver or driver directory (can be used multiple times) --vmware-tsc-map Use VMware TSC map instead of native RDTSC --proc-type Type of this process (primary|secondary|auto) --syslog Set syslog facility --log-timestamp Timestamp log output --log-level= Set global log level --log-level=: Set specific log level --log-level=help Show log types and levels --trace= Enable trace based on regular expression trace name. By default, the trace is disabled. User must specify this option to enable trace. --trace-dir= Specify trace directory for trace output. By default, trace output will created at $HOME directory and parameter must be specified once only. --trace-bufsz= Specify maximum size of allocated memory for trace output for each thread. Valid unit can be either 'B|K|M' for 'Bytes', 'KBytes' and 'MBytes' respectively. Default is 1MB and parameter must be specified once only. --trace-mode= Specify the mode of update of trace output file. Either update on a file can be wrapped or discarded when file size reaches its maximum limit. Default mode is 'overwrite' and parameter must be specified once only. -v Display version information on startup -h, --help This help --in-memory Operate entirely in memory. This will disable secondary process support --base-virtaddr Base virtual address --telemetry Enable telemetry support (on by default) --no-telemetry Disable telemetry support --force-max-simd-bitwidth Force the max SIMD bitwidth EAL options for DEBUG use only: --huge-unlink[=existing|always|never] When to unlink files in hugetlbfs ('existing' by default, no value means 'always') --no-huge Use malloc instead of hugetlbfs --no-pci Disable PCI --no-hpet Disable HPET --no-shconf No shared config (mmap'd files) EAL Linux options: --socket-mem Memory to allocate on sockets (comma separated values) --socket-limit Limit memory allocation on sockets (comma separated values) --huge-dir Directory where hugetlbfs is mounted --file-prefix Prefix for hugepage filenames --create-uio-dev Create /dev/uioX (usually done by hotplug) --vfio-intr Interrupt mode for VFIO (legacy|msi|msix) --vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs --legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments) --single-file-segments Put all hugepage memory in single files --match-allocations Free hugepages exactly as allocated --huge-worker-stack[=size] Allocate worker thread stacks from hugepage memory. Size is in units of kbytes and defaults to system thread stack size if not specified. Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' '16' Error - process did not run ok with valid -r (rank) value Test Failed RTE>> -------------------------------------stderr------------------------------------- EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'PA' TELEMETRY: No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: invalid rank number EAL: FATAL: Invalid 'command line' arguments. EAL: Invalid 'command line' arguments. EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: invalid rank number EAL: FATAL: Invalid 'command line' arguments. EAL: Invalid 'command line' arguments. EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: invalid rank number EAL: FATAL: Invalid 'command line' arguments. EAL: Invalid 'command line' arguments. EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: invalid rank number EAL: FATAL: Invalid 'command line' arguments. EAL: Invalid 'command line' arguments. EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config EAL: FATAL: Cannot init config EAL: Cannot init config ================================================================================ DPDK:fast-tests / eal_flags_mem_autotest: FAIL ================================================================================ -------------------------------------stdout------------------------------------- RTE>>eal_flags_mem_autotest Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-m' '18' Error - secondary process failed with valid -m flag ! Test Failed RTE>> -------------------------------------stderr------------------------------------- EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'PA' TELEMETRY: No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config EAL: FATAL: Cannot init config EAL: Cannot init config ================================================================================ DPDK:fast-tests / eal_flags_file_prefix_autotest: FAIL ================================================================================ -------------------------------------stdout------------------------------------- RTE>>eal_flags_file_prefix_autotest Error - hugepage files for . were not created! Test Failed RTE>> -------------------------------------stderr------------------------------------- EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'PA' TELEMETRY: No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer ================================================================================ DPDK:fast-tests / eal_flags_misc_autotest: FAIL ================================================================================ -------------------------------------stdout------------------------------------- RTE>>eal_flags_misc_autotest Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--invalid-opt' Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options] EAL common options: -c COREMASK Hexadecimal bitmask of cores to run on -l CORELIST List of cores to run on The argument format is [-c2][,c3[-c4],...] where c1, c2, etc are core indexes between 0 and 64 --lcores COREMAP Map lcore set to physical cpu set The argument format is '[<,lcores[@cpus]>...]' lcores and cpus list are grouped by '(' and ')' Within the group, '-' is used for range separator, ',' is used for single number separator. '( )' can be omitted for single element group, '@' can be omitted if cpus and lcores have the same value -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores --main-lcore ID Core ID that is used as main --mbuf-pool-ops-name Pool ops name for mbuf to use -n CHANNELS Number of memory channels -m MB Memory to allocate (see also --socket-mem) -r RANKS Force number of memory ranks (don't detect) -b, --block Add a device to the blocked list. Prevent EAL from using this device. The argument format for PCI devices is . -a, --allow Add a device to the allow list. Only use the specified devices. The argument format for PCI devices is <[domain:]bus:devid.func>. This option can be present several times. [NOTE: allow cannot be used with block option] --vdev Add a virtual device. The argument format is [,key=val,...] (ex: --vdev=net_pcap0,iface=eth2). --iova-mode Set IOVA mode. 'pa' for IOVA_PA 'va' for IOVA_VA -d LIB.so|DIR Add a driver or driver directory (can be used multiple times) --vmware-tsc-map Use VMware TSC map instead of native RDTSC --proc-type Type of this process (primary|secondary|auto) --syslog Set syslog facility --log-timestamp Timestamp log output --log-level= Set global log level --log-level=: Set specific log level --log-level=help Show log types and levels --trace= Enable trace based on regular expression trace name. By default, the trace is disabled. User must specify this option to enable trace. --trace-dir= Specify trace directory for trace output. By default, trace output will created at $HOME directory and parameter must be specified once only. --trace-bufsz= Specify maximum size of allocated memory for trace output for each thread. Valid unit can be either 'B|K|M' for 'Bytes', 'KBytes' and 'MBytes' respectively. Default is 1MB and parameter must be specified once only. --trace-mode= Specify the mode of update of trace output file. Either update on a file can be wrapped or discarded when file size reaches its maximum limit. Default mode is 'overwrite' and parameter must be specified once only. -v Display version information on startup -h, --help This help --in-memory Operate entirely in memory. This will disable secondary process support --base-virtaddr Base virtual address --telemetry Enable telemetry support (on by default) --no-telemetry Disable telemetry support --force-max-simd-bitwidth Force the max SIMD bitwidth EAL options for DEBUG use only: --huge-unlink[=existing|always|never] When to unlink files in hugetlbfs ('existing' by default, no value means 'always') --no-huge Use malloc instead of hugetlbfs --no-pci Disable PCI --no-hpet Disable HPET --no-shconf No shared config (mmap'd files) EAL Linux options: --socket-mem Memory to allocate on sockets (comma separated values) --socket-limit Limit memory allocation on sockets (comma separated values) --huge-dir Directory where hugetlbfs is mounted --file-prefix Prefix for hugepage filenames --create-uio-dev Create /dev/uioX (usually done by hotplug) --vfio-intr Interrupt mode for VFIO (legacy|msi|msix) --vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs --legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments) --single-file-segments Put all hugepage memory in single files --match-allocations Free hugepages exactly as allocated --huge-worker-stack[=size] Allocate worker thread stacks from hugepage memory. Size is in units of kbytes and defaults to system thread stack size if not specified. Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--no-pci' Error - process did not run ok with --no-pci flag Test Failed RTE>> -------------------------------------stderr------------------------------------- EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'PA' TELEMETRY: No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 /home/zhoumin/gh_dpdk/build/app/dpdk-test: unrecognized option '--invalid-opt' EAL: FATAL: Invalid 'command line' arguments. EAL: Invalid 'command line' arguments. EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config EAL: FATAL: Cannot init config EAL: Cannot init config ================================================================================ DPDK:fast-tests / multiprocess_autotest: FAIL ================================================================================ -------------------------------------stdout------------------------------------- RTE>>multiprocess_autotest Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=secondary' '--file-prefix=.' ### Testing rte_mp_disable() reject: Error: rte_mp_disable() has been accepted Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=auto' '--file-prefix=.' Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=secondary' '--file-prefix=.' IN SECONDARY PROCESS ### Testing object creation - expect lots of mz reserve errors! # Checked rte_memzone_reserve() OK # Checked rte_ring_create() OK # Checked rte_mempool_create() OK # Checked rte_hash_create() OK # Checked rte_fbk_hash_create() OK # Checked rte_lpm_create() OK ### Testing rte_mp_disable() reject: # Checked rte_mp_disable() is refused Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=auto' '--file-prefix=.' IN SECONDARY PROCESS ### Testing object creation - expect lots of mz reserve errors! # Checked rte_memzone_reserve() OK # Checked rte_ring_create() OK # Checked rte_mempool_create() OK # Checked rte_hash_create() OK # Checked rte_fbk_hash_create() OK # Checked rte_lpm_create() OK ### Testing rte_mp_disable() reject: # Checked rte_mp_disable() is refused Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=ERROR' '--file-prefix=.' Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options] EAL common options: -c COREMASK Hexadecimal bitmask of cores to run on -l CORELIST List of cores to run on The argument format is [-c2][,c3[-c4],...] where c1, c2, etc are core indexes between 0 and 64 --lcores COREMAP Map lcore set to physical cpu set The argument format is '[<,lcores[@cpus]>...]' lcores and cpus list are grouped by '(' and ')' Within the group, '-' is used for range separator, ',' is used for single number separator. '( )' can be omitted for single element group, '@' can be omitted if cpus and lcores have the same value -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores --main-lcore ID Core ID that is used as main --mbuf-pool-ops-name Pool ops name for mbuf to use -n CHANNELS Number of memory channels -m MB Memory to allocate (see also --socket-mem) -r RANKS Force number of memory ranks (don't detect) -b, --block Add a device to the blocked list. Prevent EAL from using this device. The argument format for PCI devices is . -a, --allow Add a device to the allow list. Only use the specified devices. The argument format for PCI devices is <[domain:]bus:devid.func>. This option can be present several times. [NOTE: allow cannot be used with block option] --vdev Add a virtual device. The argument format is [,key=val,...] (ex: --vdev=net_pcap0,iface=eth2). --iova-mode Set IOVA mode. 'pa' for IOVA_PA 'va' for IOVA_VA -d LIB.so|DIR Add a driver or driver directory (can be used multiple times) --vmware-tsc-map Use VMware TSC map instead of native RDTSC --proc-type Type of this process (primary|secondary|auto) --syslog Set syslog facility --log-timestamp Timestamp log output --log-level= Set global log level --log-level=: Set specific log level --log-level=help Show log types and levels --trace= Enable trace based on regular expression trace name. By default, the trace is disabled. User must specify this option to enable trace. --trace-dir= Specify trace directory for trace output. By default, trace output will created at $HOME directory and parameter must be specified once only. --trace-bufsz= Specify maximum size of allocated memory for trace output for each thread. Valid unit can be either 'B|K|M' for 'Bytes', 'KBytes' and 'MBytes' respectively. Default is 1MB and parameter must be specified once only. --trace-mode= Specify the mode of update of trace output file. Either update on a file can be wrapped or discarded when file size reaches its maximum limit. Default mode is 'overwrite' and parameter must be specified once only. -v Display version information on startup -h, --help This help --in-memory Operate entirely in memory. This will disable secondary process support --base-virtaddr Base virtual address --telemetry Enable telemetry support (on by default) --no-telemetry Disable telemetry support --force-max-simd-bitwidth Force the max SIMD bitwidth EAL options for DEBUG use only: --huge-unlink[=existing|always|never] When to unlink files in hugetlbfs ('existing' by default, no value means 'always') --no-huge Use malloc instead of hugetlbfs --no-pci Disable PCI --no-hpet Disable HPET --no-shconf No shared config (mmap'd files) EAL Linux options: --socket-mem Memory to allocate on sockets (comma separated values) --socket-limit Limit memory allocation on sockets (comma separated values) --huge-dir Directory where hugetlbfs is mounted --file-prefix Prefix for hugepage filenames --create-uio-dev Create /dev/uioX (usually done by hotplug) --vfio-intr Interrupt mode for VFIO (legacy|msi|msix) --vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs --legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments) --single-file-segments Put all hugepage memory in single files --match-allocations Free hugepages exactly as allocated --huge-worker-stack[=size] Allocate worker thread stacks from hugepage memory. Size is in units of kbytes and defaults to system thread stack size if not specified. ### Testing rte_mp_disable() reject: # Checked rte_mp_disable() is refused Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=secondary' '--file-prefix=ERROR' ### Testing rte_mp_disable() reject: # Checked rte_mp_disable() is refused ### Testing rte_mp_disable() reject: Error: rte_mp_disable() has been accepted Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=ERROR' '--file-prefix=.' Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options] EAL common options: -c COREMASK Hexadecimal bitmask of cores to run on -l CORELIST List of cores to run on The argument format is [-c2][,c3[-c4],...] where c1, c2, etc are core indexes between 0 and 64 --lcores COREMAP Map lcore set to physical cpu set The argument format is '[<,lcores[@cpus]>...]' lcores and cpus list are grouped by '(' and ')' Within the group, '-' is used for range separator, ',' is used for single number separator. '( )' can be omitted for single element group, '@' can be omitted if cpus and lcores have the same value -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores --main-lcore ID Core ID that is used as main --mbuf-pool-ops-name Pool ops name for mbuf to use -n CHANNELS Number of memory channels -m MB Memory to allocate (see also --socket-mem) -r RANKS Force number of memory ranks (don't detect) -b, --block Add a device to the blocked list. Prevent EAL from using this device. The argument format for PCI devices is . -a, --allow Add a device to the allow list. Only use the specified devices. The argument format for PCI devices is <[domain:]bus:devid.func>. This option can be present several times. [NOTE: allow cannot be used with block option] --vdev Add a virtual device. The argument format is [,key=val,...] (ex: --vdev=net_pcap0,iface=eth2). --iova-mode Set IOVA mode. 'pa' for IOVA_PA 'va' for IOVA_VA -d LIB.so|DIR Add a driver or driver directory (can be used multiple times) --vmware-tsc-map Use VMware TSC map instead of native RDTSC --proc-type Type of this process (primary|secondary|auto) --syslog Set syslog facility --log-timestamp Timestamp log output --log-level= Set global log level --log-level=: Set specific log level --log-level=help Show log types and levels --trace= Enable trace based on regular expression trace name. By default, the trace is disabled. User must specify this option to enable trace. --trace-dir= Specify trace directory for trace output. By default, trace output will created at $HOME directory and parameter must be specified once only. --trace-bufsz= Specify maximum size of allocated memory for trace output for each thread. Valid unit can be either 'B|K|M' for 'Bytes', 'KBytes' and 'MBytes' respectively. Default is 1MB and parameter must be specified once only. --trace-mode= Specify the mode of update of trace output file. Either update on a file can be wrapped or discarded when file size reaches its maximum limit. Default mode is 'overwrite' and parameter must be specified once only. -v Display version information on startup -h, --help This help --in-memory Operate entirely in memory. This will disable secondary process support --base-virtaddr Base virtual address --telemetry Enable telemetry support (on by default) --no-telemetry Disable telemetry support --force-max-simd-bitwidth Force the max SIMD bitwidth EAL options for DEBUG use only: --huge-unlink[=existing|always|never] When to unlink files in hugetlbfs ('existing' by default, no value means 'always') --no-huge Use malloc instead of hugetlbfs --no-pci Disable PCI --no-hpet Disable HPET --no-shconf No shared config (mmap'd files) EAL Linux options: --socket-mem Memory to allocate on sockets (comma separated values) --socket-limit Limit memory allocation on sockets (comma separated values) --huge-dir Directory where hugetlbfs is mounted --file-prefix Prefix for hugepage filenames --create-uio-dev Create /dev/uioX (usually done by hotplug) --vfio-intr Interrupt mode for VFIO (legacy|msi|msix) --vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs --legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments) --single-file-segments Put all hugepage memory in single files --match-allocations Free hugepages exactly as allocated --huge-worker-stack[=size] Allocate worker thread stacks from hugepage memory. Size is in units of kbytes and defaults to system thread stack size if not specified. ### Testing rte_mp_disable() reject: Error: rte_mp_disable() has been accepted Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=secondary' '--file-prefix=ERROR' ### Testing rte_mp_disable() reject: Error: rte_mp_disable() has been accepted Test Failed RTE>> -------------------------------------stderr------------------------------------- EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/rte/mp_socket EAL: Selected IOVA mode 'PA' TELEMETRY: No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config EAL: FATAL: Cannot init config EAL: Cannot init config EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Auto-detected process type: PRIMARY EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/./mp_socket EAL: Selected IOVA mode 'PA' TELEMETRY: No legacy callbacks, legacy socket not created EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/./mp_socket_2765062_1f3f662740f73 EAL: Selected IOVA mode 'PA' HASH: rte_hash_create has invalid parameters EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Auto-detected process type: SECONDARY EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/./mp_socket_2765065_1f3f662b98d0d EAL: Selected IOVA mode 'PA' RING: Cannot reserve memory HASH: rte_hash_create has invalid parameters EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Invalid process type specified EAL: FATAL: Invalid 'command line' arguments. EAL: Invalid 'command line' arguments. EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Cannot open '/var/run/dpdk/ERROR/config' for rte_mem_config EAL: FATAL: Cannot init config EAL: Cannot init config EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Invalid process type specified EAL: FATAL: Invalid 'command line' arguments. EAL: Invalid 'command line' arguments. EAL: Detected CPU lcores: 32 EAL: Detected NUMA nodes: 8 EAL: Detected static linkage of DPDK EAL: Cannot open '/var/run/dpdk/ERROR/config' for rte_mem_config EAL: FATAL: Cannot init config EAL: Cannot init config