automatic DPDK test reports
 help / color / mirror / Atom feed
* |SUCCESS| pw138466-138470 [PATCH v8 5/5] eal: initialize logging before plugins
       [not found] <20240318183233.142330-6-stephen@networkplumber.org>
@ 2024-03-18 18:10 ` qemudev
  2024-03-18 18:14 ` |FAILURE| " qemudev
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 4+ messages in thread
From: qemudev @ 2024-03-18 18:10 UTC (permalink / raw)
  To: test-report

Test-Label: loongarch-compilation
Test-Status: SUCCESS
http://dpdk.org/patch/138470

_Compilation OK_

Submitter: Stephen Hemminger <stephen@networkplumber.org>
Date: Mon, 18 Mar 2024 11:30:02 -0700
DPDK git baseline: Repo:dpdk
  Branch: main
  CommitID: 80ecef6d1f71fcebc0a51d7cabc51f73ee142ff2

138466-138470 --> meson & ninja build successfully

Test environment and result as below:

+---------------------+----------------+
|     Environment     | compilation    |
+---------------------+----------------+
| Loongnix-Server 8.3 | PASS           |
+---------------------+----------------+

Loongnix-Server 8.3
    Kernel: 4.19.190+
    Compiler: gcc 8.3


^ permalink raw reply	[flat|nested] 4+ messages in thread

* |FAILURE| pw138466-138470 [PATCH v8 5/5] eal: initialize logging before plugins
       [not found] <20240318183233.142330-6-stephen@networkplumber.org>
  2024-03-18 18:10 ` |SUCCESS| pw138466-138470 [PATCH v8 5/5] eal: initialize logging before plugins qemudev
@ 2024-03-18 18:14 ` qemudev
  2024-03-18 18:34 ` |SUCCESS| pw138470 " checkpatch
  2024-03-18 19:23 ` |FAILURE| " 0-day Robot
  3 siblings, 0 replies; 4+ messages in thread
From: qemudev @ 2024-03-18 18:14 UTC (permalink / raw)
  To: test-report; +Cc: Stephen Hemminger, zhoumin

Test-Label: loongarch-unit-testing
Test-Status: FAILURE
http://dpdk.org/patch/138470

_Unit Testing FAIL_

Submitter: Stephen Hemminger <stephen@networkplumber.org>
Date: Mon, 18 Mar 2024 11:30:02 -0700
DPDK git baseline: Repo:dpdk
  Branch: main
  CommitID: 80ecef6d1f71fcebc0a51d7cabc51f73ee142ff2

138466-138470 --> testing fail

Test environment and result as below:

+---------------------+----------------+
|     Environment     | dpdk_unit_test |
+---------------------+----------------+
| Loongnix-Server 8.3 | FAIL           |
+---------------------+----------------+

Loongnix-Server 8.3
    Kernel: 4.19.190+
    Compiler: gcc 8.3


Test result details:
  1/112 DPDK:fast-tests / acl_autotest                            OK              3.17s
  2/112 DPDK:fast-tests / argparse_autotest                       OK              0.42s
  3/112 DPDK:fast-tests / atomic_autotest                         OK              8.63s
  4/112 DPDK:fast-tests / bitcount_autotest                       OK              0.32s
  5/112 DPDK:fast-tests / bitmap_autotest                         OK              0.32s
  6/112 DPDK:fast-tests / bitops_autotest                         OK              0.32s
  7/112 DPDK:fast-tests / bitratestats_autotest                   OK              0.32s
  8/112 DPDK:fast-tests / bpf_autotest                            OK              0.32s
  9/112 DPDK:fast-tests / bpf_convert_autotest                    OK              0.32s
 10/112 DPDK:fast-tests / byteorder_autotest                      OK              0.32s
 11/112 DPDK:fast-tests / cksum_autotest                          OK              0.32s
 12/112 DPDK:fast-tests / cmdline_autotest                        OK              0.32s
 13/112 DPDK:fast-tests / common_autotest                         OK              1.17s
 14/112 DPDK:fast-tests / compressdev_autotest                    SKIP            0.12s   exit status 77
 15/112 DPDK:fast-tests / cpuflags_autotest                       OK              0.32s
 16/112 DPDK:fast-tests / crc_autotest                            OK              0.32s
 17/112 DPDK:fast-tests / user_delay_us                           OK              0.32s
 18/112 DPDK:fast-tests / debug_autotest                          OK             20.86s
 19/112 DPDK:fast-tests / devargs_autotest                        OK              0.42s
 20/112 DPDK:fast-tests / dispatcher_autotest                     OK              2.47s
 21/112 DPDK:fast-tests / distributor_autotest                    OK              1.22s
 22/112 DPDK:fast-tests / eal_flags_c_opt_autotest                FAIL            0.12s   exit status 255
 23/112 DPDK:fast-tests / eal_flags_main_opt_autotest             FAIL            0.27s   exit status 255
 24/112 DPDK:fast-tests / eal_flags_n_opt_autotest                OK              0.27s
 25/112 DPDK:fast-tests / eal_flags_hpet_autotest                 FAIL            0.12s   exit status 255
 26/112 DPDK:fast-tests / eal_flags_no_huge_autotest              OK              0.32s
 27/112 DPDK:fast-tests / eal_flags_a_opt_autotest                FAIL            0.37s   exit status 255
 28/112 DPDK:fast-tests / eal_flags_b_opt_autotest                FAIL            0.37s   exit status 255
 29/112 DPDK:fast-tests / eal_flags_vdev_opt_autotest             OK              0.27s
 30/112 DPDK:fast-tests / eal_flags_r_opt_autotest                FAIL            0.27s   exit status 255
 31/112 DPDK:fast-tests / eal_flags_mem_autotest                  FAIL            0.12s   exit status 255
 32/112 DPDK:fast-tests / eal_flags_file_prefix_autotest          FAIL            0.07s   exit status 255
 33/112 DPDK:fast-tests / eal_flags_misc_autotest                 FAIL            0.17s   exit status 255
 34/112 DPDK:fast-tests / eal_fs_autotest                         OK              0.32s
 35/112 DPDK:fast-tests / errno_autotest                          OK              0.32s
 36/112 DPDK:fast-tests / ethdev_link_status                      OK              0.32s
 37/112 DPDK:fast-tests / event_eth_tx_adapter_autotest           OK              1.72s
 38/112 DPDK:fast-tests / event_ring_autotest                     OK              0.32s
 39/112 DPDK:fast-tests / eventdev_common_autotest                OK              0.32s
 40/112 DPDK:fast-tests / eventdev_selftest_sw                    OK              7.28s
 41/112 DPDK:fast-tests / fbarray_autotest                        OK              0.32s
 42/112 DPDK:fast-tests / fib_autotest                            OK              1.02s
 43/112 DPDK:fast-tests / fib6_autotest                           OK              1.07s
 44/112 DPDK:fast-tests / func_reentrancy_autotest                OK              2.23s
 45/112 DPDK:fast-tests / graph_autotest                          OK              0.32s
 46/112 DPDK:fast-tests / node_list_dump                          OK              0.32s
 47/112 DPDK:fast-tests / hash_autotest                           OK              1.27s
 48/112 DPDK:fast-tests / hash_readwrite_func_autotest            OK              6.43s
 49/112 DPDK:fast-tests / interrupt_autotest                      OK              1.62s
 50/112 DPDK:fast-tests / ipfrag_autotest                         OK              0.12s
 51/112 DPDK:fast-tests / ipsec_autotest                          SKIP            0.32s   exit status 77
 52/112 DPDK:fast-tests / kvargs_autotest                         OK              0.32s
 53/112 DPDK:fast-tests / latencystats_autotest                   OK              0.37s
 54/112 DPDK:fast-tests / lcores_autotest                         OK              5.38s
 55/112 DPDK:fast-tests / logs_autotest                           OK              0.32s
 56/112 DPDK:fast-tests / lpm_autotest                            OK              2.38s
 57/112 DPDK:fast-tests / lpm6_autotest                           OK              5.53s
 58/112 DPDK:fast-tests / malloc_autotest                         OK             60.45s
 59/112 DPDK:fast-tests / mbuf_autotest                           OK              5.33s
 60/112 DPDK:fast-tests / mcslock_autotest                        OK              2.62s
 61/112 DPDK:fast-tests / member_autotest                         OK              1.52s
 62/112 DPDK:fast-tests / memcpy_autotest                         OK              6.93s
 63/112 DPDK:fast-tests / memory_autotest                         OK              0.12s
 64/112 DPDK:fast-tests / mempool_autotest                        OK              0.47s
 65/112 DPDK:fast-tests / memzone_autotest                        OK              0.17s
 66/112 DPDK:fast-tests / meter_autotest                          OK              0.32s
 67/112 DPDK:fast-tests / metrics_autotest                        OK              0.32s
 68/112 DPDK:fast-tests / multiprocess_autotest                   FAIL            0.42s   exit status 255
 69/112 DPDK:fast-tests / net_ether_autotest                      OK              1.02s
 70/112 DPDK:fast-tests / pcapng_autotest                         OK              5.78s
 71/112 DPDK:fast-tests / pdcp_autotest                           SKIP            0.07s   exit status 77
 72/112 DPDK:fast-tests / pdump_autotest                          OK              0.47s
 73/112 DPDK:fast-tests / per_lcore_autotest                      OK              0.42s
 74/112 DPDK:fast-tests / pflock_autotest                         OK              1.17s
 75/112 DPDK:fast-tests / pie_autotest                            OK              0.37s
 76/112 DPDK:fast-tests / ring_pmd_autotest                       OK              0.37s
 77/112 DPDK:fast-tests / power_autotest                          OK              0.32s
 78/112 DPDK:fast-tests / power_cpufreq_autotest                  SKIP            0.07s   exit status 77
 79/112 DPDK:fast-tests / power_intel_uncore_autotest             SKIP            0.32s   exit status 77
 80/112 DPDK:fast-tests / power_kvm_vm_autotest                   SKIP            0.07s   exit status 77
 81/112 DPDK:fast-tests / prefetch_autotest                       OK              0.32s
 82/112 DPDK:fast-tests / rawdev_autotest                         OK              0.32s
 83/112 DPDK:fast-tests / rcu_qsbr_autotest                       OK              0.87s
 84/112 DPDK:fast-tests / reorder_autotest                        OK              0.42s
 85/112 DPDK:fast-tests / rib_autotest                            OK              8.99s
 86/112 DPDK:fast-tests / rib6_autotest                           OK              9.04s
 87/112 DPDK:fast-tests / ring_autotest                           OK              0.37s
 88/112 DPDK:fast-tests / rwlock_test1_autotest                   OK              1.12s
 89/112 DPDK:fast-tests / rwlock_rda_autotest                     OK              5.33s
 90/112 DPDK:fast-tests / rwlock_rds_wrm_autotest                 OK              5.33s
 91/112 DPDK:fast-tests / rwlock_rde_wro_autotest                 OK              5.33s
 92/112 DPDK:fast-tests / sched_autotest                          OK              0.32s
 93/112 DPDK:fast-tests / security_autotest                       OK              0.07s
 94/112 DPDK:fast-tests / seqlock_autotest                        OK              2.32s
 95/112 DPDK:fast-tests / service_autotest                        OK              3.07s
 96/112 DPDK:fast-tests / spinlock_autotest                       OK              0.42s
 97/112 DPDK:fast-tests / stack_autotest                          OK              0.87s
 98/112 DPDK:fast-tests / stack_lf_autotest                       SKIP            0.07s   exit status 77
 99/112 DPDK:fast-tests / string_autotest                         OK              0.32s
100/112 DPDK:fast-tests / table_autotest                          OK              7.69s
101/112 DPDK:fast-tests / tailq_autotest                          OK              0.32s
102/112 DPDK:fast-tests / telemetry_data_autotest                 OK              0.32s
103/112 DPDK:fast-tests / telemetry_json_autotest                 OK              0.32s
104/112 DPDK:fast-tests / thash_autotest                          OK              0.32s
105/112 DPDK:fast-tests / threads_autotest                        OK              0.52s
106/112 DPDK:fast-tests / ticketlock_autotest                     OK              0.47s
107/112 DPDK:fast-tests / timer_autotest                          OK              3.92s
108/112 DPDK:fast-tests / trace_autotest                          OK              0.32s
109/112 DPDK:fast-tests / trace_autotest_with_traces              OK              0.37s
110/112 DPDK:fast-tests / vdev_autotest                           OK              0.32s
111/112 DPDK:fast-tests / version_autotest                        OK              0.32s
112/112 DPDK:fast-tests / telemetry_all                           OK              1.32s


Ok:                 95
Expected Fail:      0
Fail:               10
Unexpected Pass:    0
Skipped:            7
Timeout:            0



Test logs for failed test cases:
================================================================================
DPDK:fast-tests / eal_flags_c_opt_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_c_opt_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' 
Error - process did not run ok when missing -c flag
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config

================================================================================
DPDK:fast-tests / eal_flags_main_opt_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_main_opt_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-timestamp     Timestamp log output
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' '-1' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-timestamp     Timestamp log output
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' 'X' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-timestamp     Timestamp log output
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' '2' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-timestamp     Timestamp log output
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-c' '3' '--main-lcore' '1' 
Error - process did not run ok with valid --main-lcore
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
/home/zhoumin/gh_dpdk/build/app/dpdk-test: option '--main-lcore' requires an argument
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid parameter for --main-lcore
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid parameter for --main-lcore
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Main lcore is not enabled for DPDK
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config

================================================================================
DPDK:fast-tests / eal_flags_hpet_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_hpet_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--no-hpet' 
Error - process did not run ok with --no-hpet flag
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config

================================================================================
DPDK:fast-tests / eal_flags_a_opt_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_a_opt_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' 'error' '' '' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '0:0:0' '' '' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '0:error:0.1' '' '' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '0:0:0.1error' '' '' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' 'error0:0:0.1' '' '' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '0:0:0.1.2' '' '' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--allow' '00FF:09:0B.3' 
Error - process did not run ok with valid allow
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "error"
EAL: Unable to parse device 'error'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:0:0"
EAL: Unable to parse device '0:0:0'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:error:0.1"
EAL: Unable to parse device '0:error:0.1'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:0:0.1error"
EAL: Unable to parse device '0:0:0.1error'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "error0:0:0.1"
EAL: Unable to parse device 'error0:0:0.1'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:0:0.1.2"
EAL: Unable to parse device '0:0:0.1.2'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config

================================================================================
DPDK:fast-tests / eal_flags_b_opt_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_b_opt_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' 'error' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' '0:0:0' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' '0:error:0.1' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' '0:0:0.1error' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' 'error0:0:0.1' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' '0:0:0.1.2' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-b' 'FF:09:0B.3' 
Error - process did not run ok with valid blocklist value
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "error"
EAL: Unable to parse device 'error'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:0:0"
EAL: Unable to parse device '0:0:0'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:error:0.1"
EAL: Unable to parse device '0:error:0.1'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:0:0.1error"
EAL: Unable to parse device '0:0:0.1error'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "error0:0:0.1"
EAL: Unable to parse device 'error0:0:0.1'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: failed to parse device "0:0:0.1.2"
EAL: Unable to parse device '0:0:0.1.2'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config

================================================================================
DPDK:fast-tests / eal_flags_r_opt_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_r_opt_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' 'error' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-timestamp     Timestamp log output
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' '0' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-timestamp     Timestamp log output
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' '-1' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-timestamp     Timestamp log output
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' '17' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-timestamp     Timestamp log output
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-r' '16' 
Error - process did not run ok with valid -r (rank) value
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid rank number
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid rank number
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid rank number
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid rank number
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config

================================================================================
DPDK:fast-tests / eal_flags_mem_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_mem_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '-m' '18' 
Error - secondary process failed with valid -m flag !
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config

================================================================================
DPDK:fast-tests / eal_flags_file_prefix_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_file_prefix_autotest
Error - hugepage files for . were not created!
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer

================================================================================
DPDK:fast-tests / eal_flags_misc_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_misc_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--invalid-opt' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-timestamp     Timestamp log output
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=.' '--proc-type=secondary' '--no-pci' 
Error - process did not run ok with --no-pci flag
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
/home/zhoumin/gh_dpdk/build/app/dpdk-test: unrecognized option '--invalid-opt'
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config

================================================================================
DPDK:fast-tests / multiprocess_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>multiprocess_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=secondary' '--file-prefix=.' 
### Testing rte_mp_disable() reject:
Error: rte_mp_disable() has been accepted
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=auto' '--file-prefix=.' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=secondary' '--file-prefix=.' 
IN SECONDARY PROCESS
### Testing object creation - expect lots of mz reserve errors!
# Checked rte_memzone_reserve() OK
# Checked rte_ring_create() OK
# Checked rte_mempool_create() OK
# Checked rte_hash_create() OK
# Checked rte_fbk_hash_create() OK
# Checked rte_lpm_create() OK
### Testing rte_mp_disable() reject:
# Checked rte_mp_disable() is refused
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=auto' '--file-prefix=.' 
IN SECONDARY PROCESS
### Testing object creation - expect lots of mz reserve errors!
# Checked rte_memzone_reserve() OK
# Checked rte_ring_create() OK
# Checked rte_mempool_create() OK
# Checked rte_hash_create() OK
# Checked rte_fbk_hash_create() OK
# Checked rte_lpm_create() OK
### Testing rte_mp_disable() reject:
# Checked rte_mp_disable() is refused
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=ERROR' '--file-prefix=.' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-timestamp     Timestamp log output
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

### Testing rte_mp_disable() reject:
# Checked rte_mp_disable() is refused
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=secondary' '--file-prefix=ERROR' 
### Testing rte_mp_disable() reject:
# Checked rte_mp_disable() is refused
### Testing rte_mp_disable() reject:
Error: rte_mp_disable() has been accepted
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=ERROR' '--file-prefix=.' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-timestamp     Timestamp log output
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

### Testing rte_mp_disable() reject:
Error: rte_mp_disable() has been accepted
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-c' '1' '--proc-type=secondary' '--file-prefix=ERROR' 
### Testing rte_mp_disable() reject:
Error: rte_mp_disable() has been accepted
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/./config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Auto-detected process type: PRIMARY
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/./mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/./mp_socket_2765062_1f3f662740f73
EAL: Selected IOVA mode 'PA'
HASH: rte_hash_create has invalid parameters
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Auto-detected process type: SECONDARY
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/./mp_socket_2765065_1f3f662b98d0d
EAL: Selected IOVA mode 'PA'
RING: Cannot reserve memory
HASH: rte_hash_create has invalid parameters
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Invalid process type specified
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/ERROR/config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Invalid process type specified
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Cannot open '/var/run/dpdk/ERROR/config' for rte_mem_config
EAL: FATAL: Cannot init config
EAL: Cannot init config


^ permalink raw reply	[flat|nested] 4+ messages in thread

* |SUCCESS| pw138470 [PATCH v8 5/5] eal: initialize logging before plugins
       [not found] <20240318183233.142330-6-stephen@networkplumber.org>
  2024-03-18 18:10 ` |SUCCESS| pw138466-138470 [PATCH v8 5/5] eal: initialize logging before plugins qemudev
  2024-03-18 18:14 ` |FAILURE| " qemudev
@ 2024-03-18 18:34 ` checkpatch
  2024-03-18 19:23 ` |FAILURE| " 0-day Robot
  3 siblings, 0 replies; 4+ messages in thread
From: checkpatch @ 2024-03-18 18:34 UTC (permalink / raw)
  To: test-report

Test-Label: checkpatch
Test-Status: SUCCESS
http://dpdk.org/patch/138470

_coding style OK_



^ permalink raw reply	[flat|nested] 4+ messages in thread

* |FAILURE| pw138470 [PATCH v8 5/5] eal: initialize logging before plugins
       [not found] <20240318183233.142330-6-stephen@networkplumber.org>
                   ` (2 preceding siblings ...)
  2024-03-18 18:34 ` |SUCCESS| pw138470 " checkpatch
@ 2024-03-18 19:23 ` 0-day Robot
  3 siblings, 0 replies; 4+ messages in thread
From: 0-day Robot @ 2024-03-18 19:23 UTC (permalink / raw)
  To: test-report; +Cc: stephen, robot

From: robot@bytheb.org

Test-Label: github-robot: build
Test-Status: FAILURE
http://patchwork.dpdk.org/patch/138470/

_github build: failed_
Build URL: https://github.com/ovsrobot/dpdk/actions/runs/8332001745
Build Logs:
-----------------------Summary of failed steps-----------------------
"ubuntu-22.04-gcc-abi+debug+doc+examples+tests" failed at step Build and test
"ubuntu-22.04-gcc-static-mingw" failed at step Build and test
----------------------End summary of failed steps--------------------

-------------------------------BEGIN LOGS----------------------------
####################################################################################
#### [Begin job log] "ubuntu-22.04-gcc-abi+debug+doc+examples+tests" at step Build and test
####################################################################################
102/111 DPDK:fast-tests / telemetry_json_autotest  OK       0.27 s 
103/111 DPDK:fast-tests / thash_autotest        OK       0.27 s 
104/111 DPDK:fast-tests / threads_autotest      OK       0.37 s 
105/111 DPDK:fast-tests / ticketlock_autotest   OK       0.27 s 
106/111 DPDK:fast-tests / timer_autotest        OK       2.82 s 
107/111 DPDK:fast-tests / trace_autotest        OK       0.27 s 
108/111 DPDK:fast-tests / trace_autotest_with_traces  OK       0.27 s 
109/111 DPDK:fast-tests / vdev_autotest         OK       0.27 s 
110/111 DPDK:fast-tests / version_autotest      OK       0.27 s 
111/111 DPDK:fast-tests / telemetry_all         OK       1.07 s 

Ok:                   95
Expected Fail:         0
Fail:                 10
Unexpected Pass:       0
Skipped:               6
Timeout:               0

Full log written to /home/runner/work/dpdk/dpdk/build/meson-logs/testlog.txt
+ failed=true
+ catch_coredump
+ ls /tmp/dpdk-core.*.*
+ return 0
+ [ true != true ]
##[error]Process completed with exit code 1.
####################################################################################
#### [End job log] "ubuntu-22.04-gcc-abi+debug+doc+examples+tests" at step Build and test
####################################################################################




####################################################################################
#### [Begin job log] "ubuntu-22.04-gcc-static-mingw" at step Build and test
####################################################################################
   38 | #define optarg usual_optarg
      |                ^~~~~~~~~~~~
../lib/eal/common/eal_common_options.c:1653:21: note: in expansion of macro ‘optarg’
 1653 |  char *old_optarg = optarg;
      |                     ^~~~~~
../lib/eal/common/eal_common_options.c:1662:34: error: passing argument 2 of ‘usual_getopt_long’ discards ‘const’ qualifier from pointer target type [-Werror=discarded-qualifiers]
 1662 |  while ((opt = getopt_long(argc, argv, eal_short_options,
      |                                  ^~~~
../lib/eal/windows/include/getopt.h:43:57: note: in definition of macro ‘getopt_long’
   43 | #define getopt_long(a, b, c, d, e) usual_getopt_long(a, b, c, d, e)
      |                                                         ^
../lib/eal/windows/include/getopt.h:86:33: note: expected ‘char **’ but argument is of type ‘char * const*’
   86 | int getopt_long(int argc, char *argv[], const char *options,
      |                           ~~~~~~^~~~~~
../lib/eal/windows/include/getopt.h:43:57: note: in definition of macro ‘getopt_long’
   43 | #define getopt_long(a, b, c, d, e) usual_getopt_long(a, b, c, d, e)
      |                                                         ^
cc1: all warnings being treated as errors
[38/1454] Compiling C object 'lib/76b5a35@@rte_eal@sta/eal_common_eal_common_tailqs.c.obj'.
[39/1454] Linking static target lib/librte_telemetry.a.
[40/1454] Linking static target lib/librte_log.a.
[41/1454] Linking static target lib/librte_argparse.a.
[42/1454] Linking static target lib/librte_kvargs.a.
ninja: build stopped: subcommand failed.
##[error]Process completed with exit code 1.
####################################################################################
#### [End job log] "ubuntu-22.04-gcc-static-mingw" at step Build and test
####################################################################################
--------------------------------END LOGS-----------------------------

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2024-03-18 19:23 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20240318183233.142330-6-stephen@networkplumber.org>
2024-03-18 18:10 ` |SUCCESS| pw138466-138470 [PATCH v8 5/5] eal: initialize logging before plugins qemudev
2024-03-18 18:14 ` |FAILURE| " qemudev
2024-03-18 18:34 ` |SUCCESS| pw138470 " checkpatch
2024-03-18 19:23 ` |FAILURE| " 0-day Robot

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).