automatic DPDK test reports
 help / color / mirror / Atom feed
From: qemudev@loongson.cn
To: test-report@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>, zhoumin@loongson.cn
Subject: |FAILURE| pw138812-138826 [PATCH v14 15/15] log: colorize log output
Date: Wed, 27 Mar 2024 01:35:54 +0800	[thread overview]
Message-ID: <202403261735.42QHZsL73035641@localhost.localdomain> (raw)
In-Reply-To: <20240326173552.97249-16-stephen@networkplumber.org>

Test-Label: loongarch-unit-testing
Test-Status: FAILURE
http://dpdk.org/patch/138826

_Unit Testing FAIL_

Submitter: Stephen Hemminger <stephen@networkplumber.org>
Date: Tue, 26 Mar 2024 10:34:21 -0700
DPDK git baseline: Repo:dpdk
  Branch: main
  CommitID: ded4d4765171b88470e59307f10625e942f22fca

138812-138826 --> testing fail

Test environment and result as below:

+---------------------+----------------+
|     Environment     | dpdk_unit_test |
+---------------------+----------------+
| Loongnix-Server 8.3 | FAIL           |
+---------------------+----------------+

Loongnix-Server 8.3
    Kernel: 4.19.190+
    Compiler: gcc 8.3


Test result details:
  1/112 DPDK:fast-tests / acl_autotest                            OK              3.28s
  2/112 DPDK:fast-tests / argparse_autotest                       OK              0.52s
  3/112 DPDK:fast-tests / atomic_autotest                         OK              8.43s
  4/112 DPDK:fast-tests / bitcount_autotest                       OK              0.22s
  5/112 DPDK:fast-tests / bitmap_autotest                         OK              0.22s
  6/112 DPDK:fast-tests / bitops_autotest                         OK              0.22s
  7/112 DPDK:fast-tests / bitratestats_autotest                   OK              0.22s
  8/112 DPDK:fast-tests / bpf_autotest                            OK              0.22s
  9/112 DPDK:fast-tests / bpf_convert_autotest                    OK              0.22s
 10/112 DPDK:fast-tests / byteorder_autotest                      OK              0.22s
 11/112 DPDK:fast-tests / cksum_autotest                          OK              0.22s
 12/112 DPDK:fast-tests / cmdline_autotest                        OK              0.22s
 13/112 DPDK:fast-tests / common_autotest                         OK              1.17s
 14/112 DPDK:fast-tests / compressdev_autotest                    SKIP            0.07s   exit status 77
 15/112 DPDK:fast-tests / cpuflags_autotest                       OK              0.22s
 16/112 DPDK:fast-tests / crc_autotest                            OK              0.22s
 17/112 DPDK:fast-tests / user_delay_us                           OK              0.22s
 18/112 DPDK:fast-tests / debug_autotest                          OK             19.22s
 19/112 DPDK:fast-tests / devargs_autotest                        OK              0.37s
 20/112 DPDK:fast-tests / dispatcher_autotest                     OK              2.47s
 21/112 DPDK:fast-tests / distributor_autotest                    OK              1.22s
 22/112 DPDK:fast-tests / eal_flags_c_opt_autotest                OK              1.22s
 23/112 DPDK:fast-tests / eal_flags_main_opt_autotest             OK              0.32s
 24/112 DPDK:fast-tests / eal_flags_n_opt_autotest                OK              0.27s
 25/112 DPDK:fast-tests / eal_flags_hpet_autotest                 OK              0.17s
 26/112 DPDK:fast-tests / eal_flags_no_huge_autotest              OK              0.32s
 27/112 DPDK:fast-tests / eal_flags_a_opt_autotest                OK              0.42s
 28/112 DPDK:fast-tests / eal_flags_b_opt_autotest                OK              0.37s
 29/112 DPDK:fast-tests / eal_flags_vdev_opt_autotest             OK              0.27s
 30/112 DPDK:fast-tests / eal_flags_r_opt_autotest                OK              0.27s
 31/112 DPDK:fast-tests / eal_flags_mem_autotest                  OK              0.77s
 32/112 DPDK:fast-tests / eal_flags_file_prefix_autotest          OK             22.36s
 33/112 DPDK:fast-tests / eal_flags_misc_autotest                 FAIL            1.32s   exit status 255
 34/112 DPDK:fast-tests / eal_fs_autotest                         OK              0.32s
 35/112 DPDK:fast-tests / errno_autotest                          OK              0.32s
 36/112 DPDK:fast-tests / ethdev_link_status                      OK              0.32s
 37/112 DPDK:fast-tests / event_eth_tx_adapter_autotest           OK              1.72s
 38/112 DPDK:fast-tests / event_ring_autotest                     OK              0.32s
 39/112 DPDK:fast-tests / eventdev_common_autotest                OK              0.32s
 40/112 DPDK:fast-tests / eventdev_selftest_sw                    OK              7.33s
 41/112 DPDK:fast-tests / fbarray_autotest                        OK              0.32s
 42/112 DPDK:fast-tests / fib_autotest                            OK              1.02s
 43/112 DPDK:fast-tests / fib6_autotest                           OK              1.07s
 44/112 DPDK:fast-tests / func_reentrancy_autotest                OK              2.23s
 45/112 DPDK:fast-tests / graph_autotest                          OK              0.32s
 46/112 DPDK:fast-tests / node_list_dump                          OK              0.32s
 47/112 DPDK:fast-tests / hash_autotest                           OK              1.07s
 48/112 DPDK:fast-tests / hash_readwrite_func_autotest            OK              6.43s
 49/112 DPDK:fast-tests / interrupt_autotest                      OK              1.62s
 50/112 DPDK:fast-tests / ipfrag_autotest                         OK              0.12s
 51/112 DPDK:fast-tests / ipsec_autotest                          SKIP            0.32s   exit status 77
 52/112 DPDK:fast-tests / kvargs_autotest                         OK              0.32s
 53/112 DPDK:fast-tests / latencystats_autotest                   OK              0.32s
 54/112 DPDK:fast-tests / lcores_autotest                         OK              5.13s
 55/112 DPDK:fast-tests / logs_autotest                           OK              0.32s
 56/112 DPDK:fast-tests / lpm_autotest                            OK              2.43s
 57/112 DPDK:fast-tests / lpm6_autotest                           OK              5.54s
 58/112 DPDK:fast-tests / malloc_autotest                         OK             61.09s
 59/112 DPDK:fast-tests / mbuf_autotest                           OK              4.93s
 60/112 DPDK:fast-tests / mcslock_autotest                        OK              2.72s
 61/112 DPDK:fast-tests / member_autotest                         OK              1.52s
 62/112 DPDK:fast-tests / memcpy_autotest                         OK              6.98s
 63/112 DPDK:fast-tests / memory_autotest                         OK              0.12s
 64/112 DPDK:fast-tests / mempool_autotest                        OK              0.47s
 65/112 DPDK:fast-tests / memzone_autotest                        OK              0.17s
 66/112 DPDK:fast-tests / meter_autotest                          OK              0.32s
 67/112 DPDK:fast-tests / metrics_autotest                        OK              0.32s
 68/112 DPDK:fast-tests / multiprocess_autotest                   OK              0.27s
 69/112 DPDK:fast-tests / net_ether_autotest                      OK              1.02s
 70/112 DPDK:fast-tests / pcapng_autotest                         OK              7.98s
 71/112 DPDK:fast-tests / pdcp_autotest                           SKIP            0.07s   exit status 77
 72/112 DPDK:fast-tests / pdump_autotest                          OK              0.47s
 73/112 DPDK:fast-tests / per_lcore_autotest                      OK              0.42s
 74/112 DPDK:fast-tests / pflock_autotest                         OK              1.17s
 75/112 DPDK:fast-tests / pie_autotest                            OK              0.37s
 76/112 DPDK:fast-tests / ring_pmd_autotest                       OK              0.32s
 77/112 DPDK:fast-tests / power_autotest                          OK              0.32s
 78/112 DPDK:fast-tests / power_cpufreq_autotest                  SKIP            0.07s   exit status 77
 79/112 DPDK:fast-tests / power_intel_uncore_autotest             SKIP            0.32s   exit status 77
 80/112 DPDK:fast-tests / power_kvm_vm_autotest                   SKIP            0.07s   exit status 77
 81/112 DPDK:fast-tests / prefetch_autotest                       OK              0.32s
 82/112 DPDK:fast-tests / rawdev_autotest                         OK              0.32s
 83/112 DPDK:fast-tests / rcu_qsbr_autotest                       OK              0.87s
 84/112 DPDK:fast-tests / reorder_autotest                        OK              0.42s
 85/112 DPDK:fast-tests / rib_autotest                            OK              8.99s
 86/112 DPDK:fast-tests / rib6_autotest                           OK              9.00s
 87/112 DPDK:fast-tests / ring_autotest                           OK              0.38s
 88/112 DPDK:fast-tests / rwlock_test1_autotest                   OK              1.07s
 89/112 DPDK:fast-tests / rwlock_rda_autotest                     OK              5.33s
 90/112 DPDK:fast-tests / rwlock_rds_wrm_autotest                 OK              5.43s
 91/112 DPDK:fast-tests / rwlock_rde_wro_autotest                 OK              5.33s
 92/112 DPDK:fast-tests / sched_autotest                          OK              0.32s
 93/112 DPDK:fast-tests / security_autotest                       OK              0.12s
 94/112 DPDK:fast-tests / seqlock_autotest                        OK              2.32s
 95/112 DPDK:fast-tests / service_autotest                        OK              3.07s
 96/112 DPDK:fast-tests / spinlock_autotest                       OK              0.42s
 97/112 DPDK:fast-tests / stack_autotest                          OK              0.87s
 98/112 DPDK:fast-tests / stack_lf_autotest                       SKIP            0.07s   exit status 77
 99/112 DPDK:fast-tests / string_autotest                         OK              0.32s
100/112 DPDK:fast-tests / table_autotest                          OK              7.54s
101/112 DPDK:fast-tests / tailq_autotest                          OK              0.32s
102/112 DPDK:fast-tests / telemetry_data_autotest                 OK              0.32s
103/112 DPDK:fast-tests / telemetry_json_autotest                 OK              0.42s
104/112 DPDK:fast-tests / thash_autotest                          OK              0.32s
105/112 DPDK:fast-tests / threads_autotest                        OK              0.52s
106/112 DPDK:fast-tests / ticketlock_autotest                     OK              0.47s
107/112 DPDK:fast-tests / timer_autotest                          OK              3.93s
108/112 DPDK:fast-tests / trace_autotest                          OK              0.32s
109/112 DPDK:fast-tests / trace_autotest_with_traces              OK              0.32s
110/112 DPDK:fast-tests / vdev_autotest                           OK              0.32s
111/112 DPDK:fast-tests / version_autotest                        OK              0.32s
112/112 DPDK:fast-tests / telemetry_all                           OK              1.27s


Ok:                 104
Expected Fail:      0
Fail:               1
Unexpected Pass:    0
Skipped:            7
Timeout:            0



Test logs for failed test cases:
================================================================================
DPDK:fast-tests / eal_flags_misc_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_misc_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--invalid-opt' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog[=<when>]   Enable use of syslog
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --log-timestamp[=<format>]  Timestamp log output
  --log-color[=<when>] Colorize log messages
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--no-pci' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-v' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-m' '18' '--no-shconf' '--file-prefix=noshconf' '--no-huge' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--syslog' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--syslog=both' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--syslog=invalid' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-m' '18' '--file-prefix=hugedir' '--huge-dir' '/dev/hugepages' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-m' '18' '--file-prefix=hugedir' '--huge-dir' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog[=<when>]   Enable use of syslog
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --log-timestamp[=<format>]  Timestamp log output
  --log-color[=<when>] Colorize log messages
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-m' '18' '--file-prefix=hugedir' '--huge-dir' 'invalid' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-m' '18' '--file-prefix=hugedir' '--huge-dir' '/dev/hugepages/dpdk.missing' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-m' '18' '--file-prefix=hugedir' '--huge-dir' '/dev/hugepages/dpdk.dir' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--huge-dir' 'invalid' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=virtaddr' '--base-virtaddr=0x23456789' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=intr' '--vfio-intr=legacy' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=intr' '--vfio-intr=msi' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=intr' '--vfio-intr=msix' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=intr' '--vfio-intr=invalid' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog[=<when>]   Enable use of syslog
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --log-timestamp[=<format>]  Timestamp log output
  --log-color[=<when>] Colorize log messages
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=auto' '--proc-type=auto' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--proc-type=auto' '--no-shconf' '--file-prefix=noshconf' '--no-huge' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=uiodev' '--create-uio-dev' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--huge-worker-stack' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--huge-worker-stack=512' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--log-timestamp' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--log-timestamp=iso' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--log-timestamp=invalid' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--log-color' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog[=<when>]   Enable use of syslog
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --log-timestamp[=<format>]  Timestamp log output
  --log-color[=<when>] Colorize log messages
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Error - process did not run ok with --log-color parameter
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
/home/zhoumin/gh_dpdk/build/app/dpdk-test: unrecognized option '--invalid-opt'
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034483_2329aad16694b
EAL: Selected IOVA mode 'PA'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: RTE Version: 'DPDK 24.03.0-rc4'
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034486_2329aad569213
EAL: Selected IOVA mode 'PA'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Selected IOVA mode 'VA'
TELEMETRY: No legacy callbacks, legacy socket not created
dpdk-test[3034495]: EAL: Detected CPU lcores: 32
dpdk-test[3034495]: EAL: Detected NUMA nodes: 8
dpdk-test[3034495]: EAL: Detected static linkage of DPDK
dpdk-test[3034495]: EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034495_2329aae27bbbf
dpdk-test[3034495]: EAL: Selected IOVA mode 'PA'
EAL: invalid parameters for --syslog
EAL: invalid log arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/hugedir/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
/home/zhoumin/gh_dpdk/build/app/dpdk-test: option '--huge-dir' requires an argument
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/hugedir/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 511 hugepages of size 33554432 reserved, but no mounted hugetlbfs found for that size
EAL: Cannot get hugepage information.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/hugedir/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 511 hugepages of size 33554432 reserved, but no mounted hugetlbfs found for that size
EAL: Cannot get hugepage information.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/hugedir/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034514_2329aaffc21ad
EAL: Selected IOVA mode 'PA'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/virtaddr/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: WARNING! Base virtual address hint (0x2e040000 != 0xf7f4000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x3a050000 != 0xeff2000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x46060000 != 0xe7f0000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x52070000 != 0xdfee000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x5e080000 != 0xd7ec000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x6a090000 != 0xcfea000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x760a0000 != 0xc7e8000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x820b0000 != 0xbfe6000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x8e0c0000 != 0xb7e4000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x9a0d0000 != 0xafe2000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0xa60e0000 != 0xa7e0000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0xb20f0000 != 0x9fde000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0xbe100000 != 0x97dc000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0xca110000 != 0x8fda000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0xd6120000 != 0x87d8000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0xe2130000 != 0x7fd6000000) not respected!
EAL:    This may cause issues with mapping memory into secondary processes
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/intr/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/intr/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/intr/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid parameters for --vfio-intr
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Auto-detected process type: PRIMARY
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/auto/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Auto-detected process type: PRIMARY
EAL: Static memory layout is selected, amount of reserved memory can be adjusted with -m or --socket-mem
EAL: Detected static linkage of DPDK
EAL: Selected IOVA mode 'VA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/uiodev/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034545_2329ab2c7809b
EAL: Selected IOVA mode 'PA'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034548_2329ab30d2dae
EAL: Selected IOVA mode 'PA'
[     0.021795] EAL: Detected CPU lcores: 32
[     0.021869] EAL: Detected NUMA nodes: 8
[     0.022300] EAL: Detected static linkage of DPDK
[     0.025361] EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034551_2329ab352e6e2
[     0.030641] EAL: Selected IOVA mode 'PA'
[2024-03-27T01:32:41,183862+08:00] EAL: Detected CPU lcores: 32
[2024-03-27T01:32:41,184057+08:00] EAL: Detected NUMA nodes: 8
[2024-03-27T01:32:41,184462+08:00] EAL: Detected static linkage of DPDK
[2024-03-27T01:32:41,187599+08:00] EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034554_2329ab398c1ec
[2024-03-27T01:32:41,192811+08:00] EAL: Selected IOVA mode 'PA'
EAL: invalid parameters for --log-timestamp
EAL: invalid log arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
/home/zhoumin/gh_dpdk/build/app/dpdk-test: option '--log-color' requires an argument
EAL: Invalid 'command line' arguments.


  parent reply	other threads:[~2024-03-26 18:00 UTC|newest]

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20240326173552.97249-16-stephen@networkplumber.org>
2024-03-26 17:31 ` |SUCCESS| " qemudev
2024-03-26 17:35 ` qemudev [this message]
2024-03-26 17:38 ` |SUCCESS| pw138826 " checkpatch
2024-03-26 18:16 ` |FAILURE| pw138812-138826 [PATCH] [v14,15/15] log: colorize log outp dpdklab
2024-03-26 18:16 ` |SUCCESS| " dpdklab
2024-03-26 18:16 ` dpdklab
2024-03-26 18:17 ` dpdklab
2024-03-26 18:17 ` dpdklab
2024-03-26 18:17 ` |FAILURE| " dpdklab
2024-03-26 18:17 ` dpdklab
2024-03-26 18:17 ` dpdklab
2024-03-26 18:18 ` dpdklab
2024-03-26 18:18 ` |SUCCESS| " dpdklab
2024-03-26 18:18 ` |FAILURE| " dpdklab
2024-03-26 18:19 ` dpdklab
2024-03-26 18:19 ` dpdklab
2024-03-26 18:19 ` |SUCCESS| " dpdklab
2024-03-26 18:19 ` |FAILURE| " dpdklab
2024-03-26 18:19 ` dpdklab
2024-03-26 18:20 ` dpdklab
2024-03-26 18:20 ` |SUCCESS| " dpdklab
2024-03-26 18:20 ` |FAILURE| " dpdklab
2024-03-26 18:20 ` |SUCCESS| " dpdklab
2024-03-26 18:20 ` |FAILURE| " dpdklab
2024-03-26 18:21 ` |SUCCESS| " dpdklab
2024-03-26 18:21 ` |FAILURE| " dpdklab
2024-03-26 18:21 ` dpdklab
2024-03-26 18:21 ` dpdklab
2024-03-26 18:22 ` |SUCCESS| " dpdklab
2024-03-26 18:23 ` dpdklab
2024-03-26 18:24 ` dpdklab
2024-03-26 18:24 ` |FAILURE| pw138826 [PATCH v14 15/15] log: colorize log output 0-day Robot
2024-03-26 18:25 ` |SUCCESS| pw138812-138826 [PATCH] [v14,15/15] log: colorize log outp dpdklab
2024-03-26 18:25 ` dpdklab
2024-03-26 18:26 ` |FAILURE| " dpdklab
2024-03-26 18:27 ` |SUCCESS| " dpdklab
2024-03-26 18:27 ` dpdklab
2024-03-26 18:27 ` dpdklab
2024-03-26 18:27 ` |FAILURE| " dpdklab
2024-03-26 18:27 ` |SUCCESS| " dpdklab
2024-03-26 18:28 ` dpdklab
2024-03-26 18:28 ` dpdklab
2024-03-26 18:28 ` |FAILURE| " dpdklab
2024-03-26 18:29 ` |SUCCESS| " dpdklab
2024-03-26 18:30 ` |FAILURE| " dpdklab
2024-03-26 18:30 ` dpdklab
2024-03-26 18:31 ` dpdklab
2024-03-26 18:32 ` |SUCCESS| " dpdklab
2024-03-26 18:32 ` dpdklab
2024-03-26 18:32 ` dpdklab
2024-03-26 18:32 ` |FAILURE| " dpdklab
2024-03-26 18:32 ` dpdklab
2024-03-26 18:33 ` |SUCCESS| " dpdklab
2024-03-26 18:33 ` |FAILURE| " dpdklab
2024-03-26 18:33 ` dpdklab
2024-03-26 18:34 ` dpdklab
2024-03-26 18:36 ` dpdklab
2024-03-26 18:37 ` dpdklab
2024-03-26 18:37 ` |SUCCESS| " dpdklab
2024-03-26 18:37 ` |FAILURE| " dpdklab
2024-03-26 18:37 ` dpdklab
2024-03-26 18:38 ` dpdklab
2024-03-26 18:39 ` |SUCCESS| " dpdklab
2024-03-26 18:40 ` dpdklab
2024-03-26 18:40 ` dpdklab
2024-03-26 18:40 ` dpdklab
2024-03-26 18:41 ` |FAILURE| " dpdklab
2024-03-26 18:42 ` dpdklab
2024-03-26 18:45 ` dpdklab
2024-03-26 18:47 ` dpdklab
2024-03-26 18:49 ` dpdklab
2024-03-26 18:49 ` |SUCCESS| " dpdklab
2024-03-26 18:51 ` |FAILURE| " dpdklab
2024-03-26 18:53 ` dpdklab
2024-03-26 19:02 ` dpdklab
2024-03-26 19:06 ` dpdklab
2024-03-26 19:13 ` dpdklab
2024-03-26 19:15 ` |SUCCESS| " dpdklab
2024-03-26 19:17 ` dpdklab
2024-03-26 19:54 ` dpdklab
2024-03-26 19:55 ` dpdklab
2024-03-26 19:56 ` dpdklab
2024-04-02  0:53 ` dpdklab
2024-04-02  1:12 ` dpdklab
2024-04-02  1:16 ` dpdklab
2024-04-02  1:20 ` dpdklab
2024-04-02  1:24 ` dpdklab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=202403261735.42QHZsL73035641@localhost.localdomain \
    --to=qemudev@loongson.cn \
    --cc=stephen@networkplumber.org \
    --cc=test-report@dpdk.org \
    --cc=zhoumin@loongson.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).