From: qemudev@loongson.cn
To: test-report@dpdk.org
Cc: mb@smartsharesystems.com, zhoumin@loongson.cn
Subject: |FAILURE| pw147214 [PATCH v8] ethdev: TEST support single queue per port
Date: Fri, 25 Oct 2024 16:03:00 +0800 [thread overview]
Message-ID: <202410250803.49P830PB3607021@localhost.localdomain> (raw)
In-Reply-To: <20241025082338.1165360-1-mb@smartsharesystems.com>
Test-Label: loongarch-unit-testing
Test-Status: FAILURE
http://dpdk.org/patch/147214
_Unit Testing FAIL_
Submitter: Morten Brørup <mb@smartsharesystems.com>
Date: Fri, 25 Oct 2024 08:23:38 +0000
DPDK git baseline: Repo:dpdk
Branch: main
CommitID: 90cb8ff8196f9b9c1c2bcee1c94ea583789bb63f
147214 --> testing fail
Test environment and result as below:
+---------------------+----------------+
| Environment | dpdk_unit_test |
+---------------------+----------------+
| Loongnix-Server 8.3 | FAIL |
+---------------------+----------------+
Loongnix-Server 8.3
Kernel: 4.19.190+
Compiler: gcc 8.3
Test result details:
1/116 DPDK:fast-tests / acl_autotest OK 3.25s
2/116 DPDK:fast-tests / alarm_autotest OK 1.62s
3/116 DPDK:fast-tests / argparse_autotest OK 0.51s
4/116 DPDK:fast-tests / atomic_autotest OK 7.27s
5/116 DPDK:fast-tests / bitcount_autotest OK 0.32s
6/116 DPDK:fast-tests / bitmap_autotest OK 0.32s
7/116 DPDK:fast-tests / bitops_autotest OK 1.82s
8/116 DPDK:fast-tests / bitratestats_autotest OK 0.32s
9/116 DPDK:fast-tests / bitset_autotest OK 2.95s
10/116 DPDK:fast-tests / bpf_autotest OK 0.32s
11/116 DPDK:fast-tests / bpf_convert_autotest OK 0.32s
12/116 DPDK:fast-tests / byteorder_autotest OK 0.31s
13/116 DPDK:fast-tests / cksum_autotest OK 0.31s
14/116 DPDK:fast-tests / cmdline_autotest OK 0.32s
15/116 DPDK:fast-tests / common_autotest OK 1.15s
16/116 DPDK:fast-tests / compressdev_autotest SKIP 0.07s exit status 77
17/116 DPDK:fast-tests / cpuflags_autotest OK 0.31s
18/116 DPDK:fast-tests / crc_autotest OK 0.32s
19/116 DPDK:fast-tests / user_delay_us OK 0.32s
20/116 DPDK:fast-tests / debug_autotest OK 18.47s
21/116 DPDK:fast-tests / devargs_autotest OK 0.31s
22/116 DPDK:fast-tests / dispatcher_autotest OK 2.53s
23/116 DPDK:fast-tests / distributor_autotest OK 1.22s
24/116 DPDK:fast-tests / eal_flags_c_opt_autotest OK 1.17s
25/116 DPDK:fast-tests / eal_flags_main_opt_autotest OK 0.30s
26/116 DPDK:fast-tests / eal_flags_n_opt_autotest OK 0.26s
27/116 DPDK:fast-tests / eal_flags_hpet_autotest OK 0.16s
28/116 DPDK:fast-tests / eal_flags_no_huge_autotest OK 0.30s
29/116 DPDK:fast-tests / eal_flags_a_opt_autotest OK 0.41s
30/116 DPDK:fast-tests / eal_flags_b_opt_autotest OK 0.34s
31/116 DPDK:fast-tests / eal_flags_vdev_opt_autotest OK 0.25s
32/116 DPDK:fast-tests / eal_flags_r_opt_autotest OK 0.25s
33/116 DPDK:fast-tests / eal_flags_mem_autotest OK 0.73s
34/116 DPDK:fast-tests / eal_flags_file_prefix_autotest OK 22.35s
35/116 DPDK:fast-tests / eal_flags_misc_autotest OK 1.14s
36/116 DPDK:fast-tests / eal_fs_autotest OK 0.31s
37/116 DPDK:fast-tests / errno_autotest OK 0.31s
38/116 DPDK:fast-tests / ethdev_link_status OK 0.32s
39/116 DPDK:fast-tests / event_eth_tx_adapter_autotest FAIL 0.07s exit status 255
40/116 DPDK:fast-tests / event_ring_autotest OK 0.32s
41/116 DPDK:fast-tests / eventdev_common_autotest OK 0.32s
42/116 DPDK:fast-tests / eventdev_selftest_sw OK 7.39s
43/116 DPDK:fast-tests / fbarray_autotest OK 0.32s
44/116 DPDK:fast-tests / fib_autotest OK 1.22s
45/116 DPDK:fast-tests / fib6_autotest OK 1.00s
46/116 DPDK:fast-tests / func_reentrancy_autotest OK 2.34s
47/116 DPDK:fast-tests / graph_autotest OK 0.32s
48/116 DPDK:fast-tests / node_list_dump OK 0.32s
49/116 DPDK:fast-tests / hash_autotest OK 1.08s
50/116 DPDK:fast-tests / hash_readwrite_func_autotest OK 6.50s
51/116 DPDK:fast-tests / interrupt_autotest OK 1.62s
52/116 DPDK:fast-tests / ipfrag_autotest OK 0.08s
53/116 DPDK:fast-tests / ipsec_autotest SKIP 0.32s exit status 77
54/116 DPDK:fast-tests / kvargs_autotest OK 0.32s
55/116 DPDK:fast-tests / latencystats_autotest OK 0.32s
56/116 DPDK:fast-tests / lcores_autotest OK 5.13s
57/116 DPDK:fast-tests / logs_autotest OK 0.31s
58/116 DPDK:fast-tests / lpm_autotest OK 2.34s
59/116 DPDK:fast-tests / lpm6_autotest OK 5.58s
60/116 DPDK:fast-tests / malloc_autotest OK 62.60s
61/116 DPDK:fast-tests / mbuf_autotest OK 4.40s
62/116 DPDK:fast-tests / mcslock_autotest OK 2.87s
63/116 DPDK:fast-tests / member_autotest OK 1.56s
64/116 DPDK:fast-tests / memcpy_autotest OK 6.94s
65/116 DPDK:fast-tests / memory_autotest OK 0.09s
66/116 DPDK:fast-tests / mempool_autotest OK 0.44s
67/116 DPDK:fast-tests / memzone_autotest OK 0.15s
68/116 DPDK:fast-tests / meter_autotest OK 0.32s
69/116 DPDK:fast-tests / metrics_autotest OK 0.32s
70/116 DPDK:fast-tests / multiprocess_autotest OK 0.23s
71/116 DPDK:fast-tests / net_ether_autotest OK 0.98s
72/116 DPDK:fast-tests / net_ipv6_autotest OK 0.32s
73/116 DPDK:fast-tests / pcapng_autotest OK 6.72s
74/116 DPDK:fast-tests / pdcp_autotest SKIP 0.07s exit status 77
75/116 DPDK:fast-tests / pdump_autotest OK 0.44s
76/116 DPDK:fast-tests / per_lcore_autotest OK 0.42s
77/116 DPDK:fast-tests / pflock_autotest OK 1.13s
78/116 DPDK:fast-tests / pie_autotest OK 0.32s
79/116 DPDK:fast-tests / ring_pmd_autotest FAIL 0.32s exit status 255
80/116 DPDK:fast-tests / power_autotest OK 0.31s
81/116 DPDK:fast-tests / power_cpufreq_autotest SKIP 0.07s exit status 77
82/116 DPDK:fast-tests / power_intel_uncore_autotest SKIP 0.31s exit status 77
83/116 DPDK:fast-tests / power_kvm_vm_autotest SKIP 0.07s exit status 77
84/116 DPDK:fast-tests / prefetch_autotest OK 0.31s
85/116 DPDK:fast-tests / ptr_compress_autotest OK 0.31s
86/116 DPDK:fast-tests / rawdev_autotest OK 0.31s
87/116 DPDK:fast-tests / rcu_qsbr_autotest OK 0.84s
88/116 DPDK:fast-tests / reorder_autotest OK 0.37s
89/116 DPDK:fast-tests / rib_autotest OK 9.02s
90/116 DPDK:fast-tests / rib6_autotest OK 8.92s
91/116 DPDK:fast-tests / ring_autotest OK 0.35s
92/116 DPDK:fast-tests / rwlock_test1_autotest OK 1.09s
93/116 DPDK:fast-tests / rwlock_rda_autotest OK 5.32s
94/116 DPDK:fast-tests / rwlock_rds_wrm_autotest OK 5.32s
95/116 DPDK:fast-tests / rwlock_rde_wro_autotest OK 5.32s
96/116 DPDK:fast-tests / sched_autotest OK 0.32s
97/116 DPDK:fast-tests / security_autotest OK 0.07s
98/116 DPDK:fast-tests / seqlock_autotest OK 2.32s
99/116 DPDK:fast-tests / service_autotest OK 3.04s
100/116 DPDK:fast-tests / spinlock_autotest OK 0.39s
101/116 DPDK:fast-tests / stack_autotest OK 0.87s
102/116 DPDK:fast-tests / stack_lf_autotest SKIP 0.06s exit status 77
103/116 DPDK:fast-tests / string_autotest OK 0.31s
104/116 DPDK:fast-tests / table_autotest OK 7.66s
105/116 DPDK:fast-tests / tailq_autotest OK 0.31s
106/116 DPDK:fast-tests / telemetry_data_autotest OK 0.32s
107/116 DPDK:fast-tests / telemetry_json_autotest OK 0.31s
108/116 DPDK:fast-tests / thash_autotest OK 0.32s
109/116 DPDK:fast-tests / threads_autotest OK 0.49s
110/116 DPDK:fast-tests / ticketlock_autotest OK 0.46s
111/116 DPDK:fast-tests / timer_autotest OK 3.90s
112/116 DPDK:fast-tests / trace_autotest OK 0.32s
113/116 DPDK:fast-tests / trace_autotest_with_traces OK 0.32s
114/116 DPDK:fast-tests / vdev_autotest OK 0.31s
115/116 DPDK:fast-tests / version_autotest OK 0.31s
116/116 DPDK:fast-tests / telemetry_all OK 1.28s
Ok: 107
Expected Fail: 0
Fail: 2
Unexpected Pass: 0
Skipped: 7
Timeout: 0
Test logs for failed test cases:
================================================================================
DPDK:fast-tests / event_eth_tx_adapter_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>event_eth_tx_adapter_autotest
+ ------------------------------------------------------- +
+ Test Suite : tx event eth adapter test suite
+ ------------------------------------------------------- +
+ Test Suite Summary : tx event eth adapter test suite
+ ------------------------------------------------------- +
+ Tests Total : 8
+ Tests Skipped : 0
+ Tests Executed : 0
+ Tests Unsupported: 0
+ Tests Passed : 0
+ Tests Failed : 8
+ ------------------------------------------------------- +
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
APP: HPET is not enabled, using TSC as default timer
ETHDEV: Number of Rx queues requested (16) is greater than max supported(1)
EAL: Test assert init_ports line 172 failed: Port init failed 0-1
EAL: Test assert testsuite_setup line 208 failed: Port initialization failed err -1
================================================================================
DPDK:fast-tests / ring_pmd_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>ring_pmd_autotest
+ ------------------------------------------------------- +
+ Test Suite : Test Pmd Ring Unit Test Suite
nb_ports=0
tx_porta=0 rx_portb=1 rxtx_portc=2 rxtx_portd=3 rxtx_porte=4
+ ------------------------------------------------------- +
Configure failed for port 0
+ TestCase [ 0] : test_ethdev_configure_ports failed
Testing send and receive RING_SIZE/2 packets (tx_porta -> rx_portb)
Failed to transmit packet burst port 0
+ TestCase [ 1] : test_send_basic_packets failed
Testing ring PMD stats_get port 2
Error sending packet to port 2
+ TestCase [ 2] : test_get_stats_for_port failed
Testing ring PMD stats_reset port 2
Error sending packet to port 2
+ TestCase [ 3] : test_stats_reset_for_port failed
Testing send and receive 1 packet (rxtx_portd -> rxtx_porte)
Testing send and receive 1 packet (rxtx_porte -> rxtx_portd)
Testing send and receive 1 packet (rxtx_portd -> rxtx_portd)
Testing send and receive 1 packet (rxtx_porte -> rxtx_porte)
+ TestCase [ 4] : test_pmd_ring_pair_create_attach succeeded
+ TestCase [ 5] : test_command_line_ring_port succeeded
+ ------------------------------------------------------- +
+ Test Suite Summary : Test Pmd Ring Unit Test Suite
+ ------------------------------------------------------- +
+ Tests Total : 6
+ Tests Skipped : 0
+ Tests Executed : 6
+ Tests Unsupported: 0
+ Tests Passed : 2
+ Tests Failed : 4
+ ------------------------------------------------------- +
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'VA'
APP: HPET is not enabled, using TSC as default timer
ETHDEV: Number of Tx queues requested (2) is greater than max supported(1)
EAL: Test assert test_ethdev_configure_ports line 550 failed: test ethdev configure ports tx_porta is failed
ETHDEV: lcore 0 called tx_pkt_burst for not ready port 0
0: /home/zhoumin/gh_dpdk/build/app/dpdk-test (rte_dump_stack+0x40) [1205d3d54]
1: /home/zhoumin/gh_dpdk/build/app/dpdk-test (120000000+0x56c73c) [12056c73c]
2: /home/zhoumin/gh_dpdk/build/app/dpdk-test (120000000+0x324dbc) [120324dbc]
3: /home/zhoumin/gh_dpdk/build/app/dpdk-test (unit_test_suite_runner+0x2a8) [1201fc690]
4: /home/zhoumin/gh_dpdk/build/app/dpdk-test (120000000+0x1fbbbc) [1201fbbbc]
5: /home/zhoumin/gh_dpdk/build/app/dpdk-test (120000000+0x56788c) [12056788c]
6: /home/zhoumin/gh_dpdk/build/app/dpdk-test (120000000+0x566308) [120566308]
7: /home/zhoumin/gh_dpdk/build/app/dpdk-test (rdline_char_in+0x728) [12056a2c4]
8: /home/zhoumin/gh_dpdk/build/app/dpdk-test (cmdline_in+0x8c) [1205663e8]
9: /home/zhoumin/gh_dpdk/build/app/dpdk-test (main+0x5a8) [1201da260]
10: /lib64/libc.so.6 (__libc_start_main+0xe4) [fff5d40774]
11: /home/zhoumin/gh_dpdk/build/app/dpdk-test (_start+0x6c) [1201fba64]
ETHDEV: lcore 0 called tx_pkt_burst for not ready port 2
0: /home/zhoumin/gh_dpdk/build/app/dpdk-test (rte_dump_stack+0x40) [1205d3d54]
1: /home/zhoumin/gh_dpdk/build/app/dpdk-test (120000000+0x56c73c) [12056c73c]
2: /home/zhoumin/gh_dpdk/build/app/dpdk-test (120000000+0x324fd8) [120324fd8]
3: /home/zhoumin/gh_dpdk/build/app/dpdk-test (120000000+0x325120) [120325120]
4: /home/zhoumin/gh_dpdk/build/app/dpdk-test (unit_test_suite_runner+0x2a8) [1201fc690]
5: /home/zhoumin/gh_dpdk/build/app/dpdk-test (120000000+0x1fbbbc) [1201fbbbc]
6: /home/zhoumin/gh_dpdk/build/app/dpdk-test (120000000+0x56788c) [12056788c]
7: /home/zhoumin/gh_dpdk/build/app/dpdk-test (120000000+0x566308) [120566308]
8: /home/zhoumin/gh_dpdk/build/app/dpdk-test (rdline_char_in+0x728) [12056a2c4]
9: /home/zhoumin/gh_dpdk/build/app/dpdk-test (cmdline_in+0x8c) [1205663e8]
10: /home/zhoumin/gh_dpdk/build/app/dpdk-test (main+0x5a8) [1201da260]
11: /lib64/libc.so.6 (__libc_start_main+0xe4) [fff5d40774]
12: /home/zhoumin/gh_dpdk/build/app/dpdk-test (_start+0x6c) [1201fba64]
EAL: Test assert test_get_stats_for_port line 563 failed: test get stats failed
EAL: Test assert test_stats_reset_for_port line 570 failed: test stats reset failed
ETHDEV: Device with port_id=0 already stopped
ETHDEV: Device with port_id=1 already stopped
ETHDEV: Device with port_id=2 already stopped
next prev parent reply other threads:[~2024-10-25 8:36 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20241025082338.1165360-1-mb@smartsharesystems.com>
2024-10-25 7:58 ` |SUCCESS| " qemudev
2024-10-25 8:03 ` qemudev [this message]
2024-10-25 8:24 ` |WARNING| " checkpatch
2024-10-25 9:27 ` |FAILURE| " 0-day Robot
2024-10-25 11:37 ` |SUCCESS| pw147214 [PATCH] [v8] ethdev: TEST support single queue pe dpdklab
2024-10-25 11:48 ` |FAILURE| " dpdklab
2024-10-25 11:52 ` dpdklab
2024-10-25 11:59 ` |SUCCESS| " dpdklab
2024-10-25 12:23 ` dpdklab
2024-10-25 12:33 ` dpdklab
2024-10-25 12:58 ` |FAILURE| " dpdklab
2024-10-25 13:05 ` dpdklab
2024-10-25 13:10 ` |SUCCESS| " dpdklab
2024-10-25 13:15 ` dpdklab
2024-10-25 21:26 ` |PENDING| " dpdklab
2024-10-25 21:35 ` |FAILURE| " dpdklab
2024-10-25 21:48 ` dpdklab
2024-10-25 21:55 ` dpdklab
2024-10-26 3:18 ` dpdklab
2024-10-26 3:37 ` dpdklab
2024-10-26 5:07 ` |SUCCESS| " dpdklab
2024-10-26 5:26 ` |PENDING| " dpdklab
2024-10-26 6:22 ` |SUCCESS| " dpdklab
2024-10-26 14:04 ` dpdklab
2024-10-26 14:37 ` dpdklab
2024-10-26 15:12 ` dpdklab
2024-10-26 17:53 ` dpdklab
2024-10-27 9:46 ` |PENDING| " dpdklab
2024-10-27 11:50 ` dpdklab
2024-10-27 16:06 ` |SUCCESS| " dpdklab
2024-10-27 17:29 ` dpdklab
2024-10-27 21:39 ` dpdklab
2024-10-28 13:37 ` |FAILURE| " dpdklab
2024-10-28 15:57 ` dpdklab
2024-10-28 20:27 ` dpdklab
2024-10-28 21:24 ` dpdklab
2024-10-29 0:14 ` dpdklab
2024-10-29 10:52 ` dpdklab
2024-10-30 23:13 ` dpdklab
2024-11-01 19:08 ` |SUCCESS| " dpdklab
2024-11-01 19:59 ` dpdklab
2024-11-02 3:24 ` dpdklab
2024-11-02 3:52 ` dpdklab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202410250803.49P830PB3607021@localhost.localdomain \
--to=qemudev@loongson.cn \
--cc=mb@smartsharesystems.com \
--cc=test-report@dpdk.org \
--cc=zhoumin@loongson.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).