I've submitted just the single patch that fails to compile on i686. 12885
<http://www.dpdk.org/dev/patchwork/patch/12885/> and marked the old one as
superseded.  Not sure if the process works when a single patch in a series
is updated or not.

On Wed, May 18, 2016 at 2:23 AM, <sys_stv@intel.com> wrote:

>
> Test-Label: Intel Niantic on Fedora
> Test-Status: ERROR
>
> Patchwork ID: 12745-12784
> http://www.dpdk.org/dev/patchwork/patch/12784/
> Submitter: Stephen Hurd <stephen.hurd@broadcom.com>
> Date: Fri, 13 May 2016 15:45:50 -0700
> DPDK git baseline: 213af31e0960e5086bce280364b2eb0d9c6cd261
>
> Check patch:Success
>
> Compilation:
> OS: fedora
> Nic: niantic
> GCC: gcc_x86-64, 4.8.3
> ICC:16.0.2
> i686-native-linuxapp-icc: compile pass
> x86_64-native-linuxapp-gcc-combined: compile pass
> i686-native-linuxapp-gcc: compile error
> x86_64-native-linuxapp-gcc: compile pass
> x86_64-native-linuxapp-icc: compile pass
> x86_64-native-linuxapp-gcc-debug: compile pass
> x86_64-native-linuxapp-gcc-shared: compile pass
> x86_64-native-linuxapp-clang: compile pass
>
> i686-native-linuxapp-gcc:
> Configuration done
> == Build lib
> == Build lib/librte_compat
> == Build lib/librte_eal
> == Build lib/librte_net
>   SYMLINK-FILE include/rte_compat.h
>     SYMLINK-FILE include/rte_ip.h
> == Build lib/librte_eal/common
>   SYMLINK-FILE include/rte_tcp.h
>     SYMLINK-FILE include/rte_udp.h
>   SYMLINK-FILE include/rte_sctp.h
>     SYMLINK-FILE include/rte_icmp.h
>   SYMLINK-FILE include/rte_arp.h
>     SYMLINK-FILE include/generic/rte_atomic.h
>   SYMLINK-FILE include/generic/rte_byteorder.h
>     SYMLINK-FILE include/generic/rte_cycles.h
>   SYMLINK-FILE include/generic/rte_prefetch.h
>     SYMLINK-FILE include/generic/rte_spinlock.h
>   SYMLINK-FILE include/generic/rte_memcpy.h
>     SYMLINK-FILE include/generic/rte_cpuflags.h
>   SYMLINK-FILE include/generic/rte_rwlock.h
>     SYMLINK-FILE include/rte_branch_prediction.h
>   SYMLINK-FILE include/rte_common.h
>     SYMLINK-FILE include/rte_debug.h
>   SYMLINK-FILE include/rte_eal.h
>     SYMLINK-FILE include/rte_errno.h
>   SYMLINK-FILE include/rte_launch.h
>     SYMLINK-FILE include/rte_log.h
>   SYMLINK-FILE include/rte_lcore.h
>     SYMLINK-FILE include/rte_memory.h
>   SYMLINK-FILE include/rte_memzone.h
>     SYMLINK-FILE include/rte_pci.h
>   SYMLINK-FILE include/rte_pci_dev_ids.h
>     SYMLINK-FILE include/rte_per_lcore.h
>   SYMLINK-FILE include/rte_random.h
>     SYMLINK-FILE include/rte_tailq.h
>   SYMLINK-FILE include/rte_interrupts.h
>     SYMLINK-FILE include/rte_alarm.h
>   SYMLINK-FILE include/rte_version.h
>     SYMLINK-FILE include/rte_eal_memconfig.h
>   SYMLINK-FILE include/rte_malloc_heap.h
>     SYMLINK-FILE include/rte_hexdump.h
>   SYMLINK-FILE include/rte_devargs.h
>     SYMLINK-FILE include/rte_dev.h
>   SYMLINK-FILE include/rte_pci_dev_feature_defs.h
>     SYMLINK-FILE include/rte_pci_dev_features.h
>   SYMLINK-FILE include/rte_malloc.h
>     SYMLINK-FILE include/rte_keepalive.h
>   SYMLINK-FILE include/rte_time.h
>     SYMLINK-FILE include/rte_rwlock.h
>   SYMLINK-FILE include/rte_memcpy.h
>     SYMLINK-FILE include/rte_cycles.h
>   SYMLINK-FILE include/rte_spinlock.h
>     SYMLINK-FILE include/rte_vect.h
>   SYMLINK-FILE include/rte_atomic_32.h
>     SYMLINK-FILE include/rte_prefetch.h
>   SYMLINK-FILE include/rte_byteorder_32.h
>     SYMLINK-FILE include/rte_atomic_64.h
>   SYMLINK-FILE include/rte_rtm.h
>     SYMLINK-FILE include/rte_cpuflags.h
>   SYMLINK-FILE include/rte_byteorder_64.h
>     SYMLINK-FILE include/rte_atomic.h
>   SYMLINK-FILE include/rte_byteorder.h
>   == Build lib/librte_eal/linuxapp
>   == Build lib/librte_eal/linuxapp/eal
>   == Build lib/librte_eal/linuxapp/igb_uio
>     CC eal.o
>   CC eal_hugepage_info.o
>     CC eal_memory.o
>   CC eal_thread.o
>     CC eal_log.o
>   CC eal_pci.o
>     CC eal_pci_uio.o
>   CC eal_pci_vfio.o
>     CC eal_pci_vfio_mp_sync.o
>   CC eal_debug.o
>     CC eal_lcore.o
>   CC eal_timer.o
>     CC eal_interrupts.o
>   CC eal_alarm.o
>     CC eal_common_lcore.o
>   CC eal_common_timer.o
>     CC eal_common_memzone.o
>   CC eal_common_launch.o
>     CC eal_common_pci.o
>   CC eal_common_log.o
>     CC eal_common_pci_uio.o
>   CC eal_common_memory.o
>     CC eal_common_tailqs.o
>   CC eal_common_errno.o
>     CC eal_common_cpuflags.o
>   CC eal_common_hexdump.o
>     CC eal_common_string_fns.o
>   CC eal_common_dev.o
>     CC eal_common_devargs.o
>   CC eal_common_thread.o
>     CC eal_common_options.o
>   CC eal_common_proc.o
>     CC rte_malloc.o
>   CC malloc_elem.o
>     SYMLINK-FILE include/exec-env/rte_interrupts.h
>   CC malloc_heap.o
>     SYMLINK-FILE include/exec-env/rte_kni_common.h
>   CC rte_keepalive.o
>     CC rte_cpuflags.o
>   SYMLINK-FILE include/exec-env/rte_dom0_common.h
>     AR librte_eal.a
>   INSTALL-LIB librte_eal.a
>   == Build lib/librte_eal/linuxapp/kni
>     LD
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/built-in.o
> (cat /dev/null;   echo
> kernel//home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko;)
> >
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/modules.order
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o
>     Building modules, stage 2.
>   MODPOST 1 modules
>     CC
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.mod.o
>   LD
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/built-in.o
>     CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_main.o
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_api.o
>     CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_common.o
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_ethtool.o
>     CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_82599.o
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_82598.o
>     CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_x540.o
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/ixgbe_phy.o
>     CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/kcompat.o
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/e1000_82575.o
>     CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/e1000_i210.o
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/e1000_api.o
>     CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/e1000_mac.o
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/e1000_manage.o
>     LD [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.ko
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/e1000_mbx.o
>     CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/e1000_nvm.o
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/e1000_phy.o
>   INSTALL-MODULE igb_uio.ko
>     CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/igb_ethtool.o
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/igb_hwmon.o
>     CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/igb_main.o
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/igb_debugfs.o
>     CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/igb_param.o
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/igb_procfs.o
>     CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/kni_misc.o
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/igb_vmdq.o
>   (cat /dev/null;   echo
> kernel//home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/rte_kni.ko;)
> >
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/modules.order
>     CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/kni_ethtool.o
>   CC [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/kni_net.o
>     LD [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/rte_kni.o
>   Building modules, stage 2.
>     MODPOST 1 modules
>   CC
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/rte_kni.mod.o
>     LD [M]
> /home/patchWorkOrg/compilation/i686-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/rte_kni.ko
> INSTALL-MODULE rte_kni.ko
> == Build lib/librte_cmdline
> == Build lib/librte_ring
> == Build lib/librte_timer
> == Build lib/librte_cfgfile
> == Build lib/librte_kvargs
> == Build lib/librte_power
> == Build lib/librte_lpm
> == Build lib/librte_jobstats
> == Build lib/librte_meter
> == Build lib/librte_acl
>   SYMLINK-FILE include/rte_lpm.h
>     CC rte_lpm.o
>   SYMLINK-FILE include/rte_lpm6.h
>     CC rte_lpm6.o
>   SYMLINK-FILE include/rte_lpm_sse.h
>     SYMLINK-FILE include/rte_jobstats.h
>   SYMLINK-FILE include/rte_cfgfile.h
>     CC rte_jobstats.o
>   SYMLINK-FILE include/rte_ring.h
>     CC rte_ring.o
>   CC rte_cfgfile.o
>     SYMLINK-FILE include/rte_meter.h
>   CC rte_meter.o
>     CC rte_timer.o
>   SYMLINK-FILE include/rte_kvargs.h
>     SYMLINK-FILE include/rte_timer.h
>   CC rte_kvargs.o
>     CC rte_power.o
>   CC rte_power_acpi_cpufreq.o
>     CC rte_power_kvm_vm.o
>   SYMLINK-FILE include/rte_power.h
>     CC guest_channel.o
>   CC cmdline.o
>     CC tb_mem.o
>   CC cmdline_cirbuf.o
>     AR librte_kvargs.a
>   CC cmdline_parse.o
>     AR librte_cfgfile.a
>   CC acl_gen.o
>     CC rte_acl.o
>   CC acl_bld.o
>     CC cmdline_parse_etheraddr.o
>   CC acl_run_scalar.o
>     CC acl_run_avx2.o
>   CC acl_run_sse.o
>     SYMLINK-FILE include/rte_acl_osdep.h
>   INSTALL-LIB librte_kvargs.a
>     INSTALL-LIB librte_cfgfile.a
>   SYMLINK-FILE include/rte_acl.h
>     CC cmdline_parse_ipaddr.o
>   CC cmdline_parse_num.o
>     CC cmdline_parse_string.o
>   CC cmdline_rdline.o
>     AR librte_ring.a
>   SYMLINK-FILE include/cmdline.h
>     AR librte_meter.a
>   CC cmdline_vt100.o
>     AR librte_jobstats.a
>   CC cmdline_socket.o
>     CC cmdline_parse_portlist.o
>   SYMLINK-FILE include/cmdline_parse.h
>     AR librte_lpm.a
>   AR librte_timer.a
>     INSTALL-LIB librte_ring.a
>   INSTALL-LIB librte_jobstats.a
>     SYMLINK-FILE include/cmdline_parse_num.h
>   INSTALL-LIB librte_lpm.a
>     INSTALL-LIB librte_timer.a
>   INSTALL-LIB librte_meter.a
>   == Build lib/librte_mempool
>     SYMLINK-FILE include/cmdline_parse_ipaddr.h
>   SYMLINK-FILE include/cmdline_parse_etheraddr.h
>     SYMLINK-FILE include/cmdline_parse_string.h == Build lib/librte_hash
>   SYMLINK-FILE include/cmdline_rdline.h
>     SYMLINK-FILE include/cmdline_vt100.h
>   SYMLINK-FILE include/cmdline_socket.h
>     AR librte_power.a
>   SYMLINK-FILE include/cmdline_cirbuf.h
>     SYMLINK-FILE include/cmdline_parse_portlist.h
>   INSTALL-LIB librte_power.a
>     AR librte_cmdline.a
>   INSTALL-LIB librte_cmdline.a
>     AR librte_acl.a
>   INSTALL-LIB librte_acl.a
>     CC rte_cuckoo_hash.o
>   SYMLINK-FILE include/rte_hash.h
>     SYMLINK-FILE include/rte_hash_crc.h
>   SYMLINK-FILE include/rte_jhash.h
>     CC rte_fbk_hash.o
>   SYMLINK-FILE include/rte_mempool.h
>     SYMLINK-FILE include/rte_thash.h
>   CC rte_mempool.o
>     SYMLINK-FILE include/rte_fbk_hash.h
>   AR librte_hash.a
>     AR librte_mempool.a
>   INSTALL-LIB librte_mempool.a
>     INSTALL-LIB librte_hash.a
> == Build lib/librte_mbuf
>   SYMLINK-FILE include/rte_mbuf.h
>     CC rte_mbuf.o
>   AR librte_mbuf.a
>     INSTALL-LIB librte_mbuf.a
> == Build lib/librte_ether
> == Build lib/librte_cryptodev
> == Build lib/librte_distributor
> == Build lib/librte_reorder
> == Build lib/librte_sched
>   SYMLINK-FILE include/rte_crypto.h
>     SYMLINK-FILE include/rte_reorder.h
>   SYMLINK-FILE include/rte_crypto_sym.h
>     SYMLINK-FILE include/rte_cryptodev.h
>   SYMLINK-FILE include/rte_distributor.h
>     CC rte_cryptodev.o
>   CC rte_reorder.o
>     SYMLINK-FILE include/rte_cryptodev_pmd.h
>   CC rte_distributor.o
>     SYMLINK-FILE include/rte_ether.h
>   SYMLINK-FILE include/rte_ethdev.h
>     SYMLINK-FILE include/rte_dev_info.h
>   SYMLINK-FILE include/rte_eth_ctrl.h
>     CC rte_ethdev.o
>   CC rte_red.o
>     CC rte_sched.o
>   SYMLINK-FILE include/rte_sched.h
>     SYMLINK-FILE include/rte_bitmap.h
>   SYMLINK-FILE include/rte_sched_common.h
>     CC rte_approx.o
>   SYMLINK-FILE include/rte_red.h
>     CC rte_reciprocal.o
>   SYMLINK-FILE include/rte_approx.h
>     SYMLINK-FILE include/rte_reciprocal.h
>   AR librte_reorder.a
>     AR librte_sched.a
>   INSTALL-LIB librte_reorder.a
>     AR librte_distributor.a
>   INSTALL-LIB librte_sched.a
>     INSTALL-LIB librte_distributor.a
>   AR librte_cryptodev.a
>     AR libethdev.a
>   INSTALL-LIB librte_cryptodev.a
>     INSTALL-LIB libethdev.a
> == Build lib/librte_vhost
> == Build lib/librte_ip_frag
>   CC virtio-net.o
>     CC vhost_rxtx.o
>   SYMLINK-FILE include/rte_virtio_net.h
>     CC vhost_user/vhost-net-user.o
>   CC rte_ipv4_fragmentation.o
>     CC vhost_user/virtio-net-user.o
>   CC vhost_user/fd_man.o
>     CC rte_ipv6_fragmentation.o
>   CC rte_ipv6_reassembly.o
>     CC rte_ipv4_reassembly.o
>   SYMLINK-FILE include/rte_ip_frag.h
>     CC rte_ip_frag_common.o
>   CC ip_frag_internal.o
>     AR librte_ip_frag.a
>   INSTALL-LIB librte_ip_frag.a
>     AR librte_vhost.a
>   INSTALL-LIB librte_vhost.a
>   == Build lib/librte_port
>     CC rte_port_ethdev.o
>   CC rte_port_ring.o
>     CC rte_port_frag.o
>   CC rte_port_ras.o
>     CC rte_port_sched.o
>   SYMLINK-FILE include/rte_port.h
>     CC rte_port_source_sink.o
>   SYMLINK-FILE include/rte_port_ring.h
>     SYMLINK-FILE include/rte_port_frag.h
>   SYMLINK-FILE include/rte_port_ras.h
>     SYMLINK-FILE include/rte_port_ethdev.h
>   SYMLINK-FILE include/rte_port_sched.h
>     SYMLINK-FILE include/rte_port_source_sink.h
>   AR librte_port.a
>     INSTALL-LIB librte_port.a
> == Build lib/librte_table
>   CC rte_table_lpm.o
>     CC rte_table_lpm_ipv6.o
>   CC rte_table_hash_key8.o
>     CC rte_table_acl.o
>   CC rte_table_hash_key16.o
>     CC rte_table_hash_ext.o
>   CC rte_table_hash_key32.o
>     CC rte_table_hash_lru.o
>   SYMLINK-FILE include/rte_table_lpm.h
>     SYMLINK-FILE include/rte_table.h
>   CC rte_table_array.o
>     SYMLINK-FILE include/rte_table_lpm_ipv6.h
>   CC rte_table_stub.o
>     SYMLINK-FILE include/rte_table_acl.h
>   SYMLINK-FILE include/rte_table_hash.h
>     SYMLINK-FILE include/rte_lru.h
>   SYMLINK-FILE include/rte_table_array.h
>     SYMLINK-FILE include/rte_table_stub.h
>   AR librte_table.a
>     INSTALL-LIB librte_table.a
> == Build lib/librte_pipeline
>   SYMLINK-FILE include/rte_pipeline.h
>     CC rte_pipeline.o
>   AR librte_pipeline.a
>     INSTALL-LIB librte_pipeline.a
> == Build drivers
> == Build drivers/net
> == Build drivers/crypto
> == Build drivers/net/ena
> == Build drivers/crypto/null
> == Build drivers/net/bonding
> == Build drivers/net/af_packet
> == Build drivers/net/e1000
> == Build drivers/net/cxgbe
> == Build drivers/net/enic
> == Build drivers/net/fm10k
> == Build drivers/net/i40e
> == Build drivers/net/ixgbe
> == Build drivers/net/bnxt
> == Build drivers/net/null
> == Build drivers/net/qede
> == Build drivers/net/ring
> == Build drivers/net/vmxnet3
> == Build drivers/net/virtio
> == Build drivers/net/vhost
>   CC null_crypto_pmd.o
>     CC null_crypto_pmd_ops.o
>   CC e1000_80003es2lan.o
>     CC e1000_82540.o
>   CC e1000_82541.o
>     CC e1000_82542.o
>   CC e1000_82543.o
>     CC e1000_82571.o
>   CC e1000_82575.o
>     CC e1000_i210.o
>   CC e1000_api.o
>     CC e1000_ich8lan.o
>   CC e1000_mac.o
>     CC e1000_manage.o
>   CC e1000_mbx.o
>     CC e1000_nvm.o
>   CC e1000_osdep.o
>     CC e1000_phy.o
>   CC e1000_vf.o
>     CC igb_ethdev.o
>   CC igb_rxtx.o
>     CC igb_pf.o
>   CC em_rxtx.o
>     CC em_ethdev.o
>   CC rte_eth_bond_api.o
>     CC rte_eth_bond_pmd.o
>   CC rte_eth_bond_args.o
>     CC rte_eth_bond_8023ad.o
>   CC rte_eth_bond_alb.o
>     CC bnxt_cpr.o
>   CC bnxt_ethdev.o
>     CC rte_eth_af_packet.o
>   CC bnxt_filter.o
>     CC bnxt_hwrm.o
>   CC bnxt_ring.o
>     CC bnxt_rxq.o
>   SYMLINK-FILE include/rte_eth_null.h
>     CC rte_eth_null.o
>   CC virtqueue.o
>     CC bnxt_rxr.o
>   CC enic_ethdev.o
>     CC enic_main.o
>   CC virtio_pci.o
>     SYMLINK-FILE include/rte_eth_vhost.h
>   CC enic_rx.o
>     CC rte_eth_vhost.o
>   CC enic_clsf.o
>     CC enic_res.o
>   CC fm10k_ethdev.o
>     CC virtio_rxtx.o
>   CC fm10k_pf.o
>     CC fm10k_rxtx.o
>   CC fm10k_tlv.o
>     CC bnxt_stats.o
>   CC bnxt_txq.o
>     CC bnxt_txr.o
>   CC bnxt_vnic.o
>     CC base/vnic_wq.o
>   CC virtio_rxtx_simple.o
>     CC base/vnic_cq.o
>   CC base/vnic_dev.o
>     CC fm10k_common.o
>   CC rte_eth_ring.o
>     CC base/vnic_intr.o
>   CC base/vnic_rq.o
>     CC base/vnic_rss.o
>   CC fm10k_mbx.o
>     CC fm10k_vf.o
>   CC i40e_adminq.o
>     SYMLINK-FILE include/rte_eth_ring.h
>   CC i40e_common.o
>     CC i40e_diag.o
>   CC base/ecore_hw.o
>     CC base/ecore_dev.o
>   CC i40e_hmc.o
>     CC fm10k_api.o
>   CC base/ecore_cxt.o
>     CC fm10k_rxtx_vec.o
>   CC base/ecore_l2.o
>     CC i40e_lan_hmc.o
>   CC i40e_nvm.o
>     CC base/ecore_sp_commands.o
>   CC base/ecore_init_fw_funcs.o
>     CC base/ecore_spq.o
>   CC base/ecore_init_ops.o
>     CC i40e_dcb.o
>   CC i40e_ethdev.o
>     CC i40e_rxtx.o
>   CC i40e_rxtx_vec.o
>     CC base/ecore_int.o
>   CC base/ecore_mcp.o
>     CC i40e_ethdev_vf.o
>   CC base/ecore_dcbx.o
>     CC base/bcm_osal.o
>   CC base/ecore_sriov.o
>     CC base/ecore_vf.o
>   CC qede_ethdev.o
>     CC i40e_pf.o
>   CC qede_eth_if.o
>     CC i40e_fdir.o
>   CC qede_main.o
>     CC qede_rxtx.o
> /home/patchWorkOrg/compilation/drivers/net/bnxt/bnxt_ethdev.c: In function
> .bnxt_dev_init.:
> /home/patchWorkOrg/compilation/drivers/net/bnxt/bnxt_ethdev.c:974:3:
> error: format .%lu. expects argument of type .long unsigned int., but
> argument 4 has type .unsigned int. [-Werror=format=]
>    RTE_LOG(ERR, PMD,
>       ^
>   cc1: all warnings being treated as errors
>     AR librte_pmd_null_crypto.a
>   AR librte_pmd_bond.a
>     INSTALL-LIB librte_pmd_bond.a
>   INSTALL-LIB librte_pmd_null_crypto.a
>     AR librte_pmd_e1000.a
>   AR librte_pmd_af_packet.a
>     AR librte_pmd_null.a
>   INSTALL-LIB librte_pmd_af_packet.a
>     INSTALL-LIB librte_pmd_null.a
>   CC vmxnet3_rxtx.o
>     CC vmxnet3_ethdev.o
>   CC ena_com.o
>     CC ena_ethdev.o
>   INSTALL-LIB librte_pmd_e1000.a
>     CC ena_eth_com.o
>   CC cxgbe_main.o
>     CC cxgbe_ethdev.o
>   CC t4_hw.o
>     CC sge.o
>   AR librte_pmd_ena.a
>     AR librte_pmd_ring.a
>   INSTALL-LIB librte_pmd_ring.a
>     INSTALL-LIB librte_pmd_ena.a
> make[6]: *** [bnxt_ethdev.o] Error 1
> make[6]: *** Waiting for unfinished jobs....
>   AR librte_pmd_vmxnet3_uio.a
>     INSTALL-LIB librte_pmd_vmxnet3_uio.a
>   AR librte_pmd_vhost.a
>     AR librte_pmd_enic.a
>   AR librte_pmd_cxgbe.a
>     INSTALL-LIB librte_pmd_vhost.a
>   INSTALL-LIB librte_pmd_cxgbe.a
>     AR librte_pmd_fm10k.a
>   INSTALL-LIB librte_pmd_fm10k.a
>   make[5]: *** [bnxt] Error 2
>   make[5]: *** Waiting for unfinished jobs....
>     INSTALL-LIB librte_pmd_enic.a
>   AR librte_pmd_qede.a
>     INSTALL-LIB librte_pmd_qede.a
>   CC ixgbe_common.o
>     CC ixgbe_82598.o
>   CC ixgbe_82599.o
>     CC ixgbe_x540.o
>   CC ixgbe_phy.o
>     CC ixgbe_api.o
>   CC ixgbe_x550.o
>     CC ixgbe_vf.o
>   CC ixgbe_dcb.o
>     CC ixgbe_dcb_82599.o
>   CC ixgbe_dcb_82598.o
>     CC ixgbe_mbx.o
>   CC ixgbe_rxtx.o
>     CC ixgbe_ethdev.o
>   CC ixgbe_fdir.o
>     CC ixgbe_pf.o
>   AR librte_pmd_virtio.a
>     INSTALL-LIB librte_pmd_virtio.a
>   AR librte_pmd_ixgbe.a
>     INSTALL-LIB librte_pmd_ixgbe.a
>   AR librte_pmd_i40e.a
>     INSTALL-LIB librte_pmd_i40e.a
> make[4]: *** [net] Error 2
> make[3]: *** [drivers] Error 2
> make[2]: *** [all] Error 2
> make[1]: *** [pre_install] Error 2
> make: *** [install] Error 2
>
>
>
> DPDK STV team
>



-- 
Stephen Hurd
Principal Engineer - Software Development
Broadcom Corporation
949-926-8039
stephen.hurd@broadcom.com