Re: I need DPDK MLX5 Probe error support

[Thomas Monjalon <thomas@monjalon.net>]

Hi,

I think you need to read the documentation.
For DPDK install on Linux:
https://doc.dpdk.org/guides/linux_gsg/build_dpdk.html#compiling-and-installing-dpdk-system-wide
For mlx5 specific dependencies, install rdma-core package:
https://doc.dpdk.org/guides/nics/mlx5.html#linux-prerequisites


02/10/2021 12:57, Jaeeun Ham:
> Hi,
> 
> Could you teach me how to install dpdk-testpmd?
> I have to run the application on the host server, not a development server.
> So, I don't know how to get dpdk-testpmd.
> 
> By the way, testpmd run result is as below.
> root@seroics05590:~/ejaeham# testpmd
> EAL: Detected 64 lcore(s)
> EAL: libmlx4.so.1: cannot open shared object file: No such file or directory
> EAL: FATAL: Cannot init plugins
> 
> EAL: Cannot init plugins
> 
> PANIC in main():
> Cannot init EAL
> 5: [testpmd(_start+0x2a) [0x55d301d98e1a]]
> 4: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe7) [0x7f5e044a4bf7]]
> 3: [testpmd(main+0x907) [0x55d301d98d07]]
> 2: [/usr/lib/x86_64-linux-gnu/librte_eal.so.17.11(__rte_panic+0xbd) [0x7f5e04ca3cfd]]
> 1: [/usr/lib/x86_64-linux-gnu/librte_eal.so.17.11(rte_dump_stack+0x2e) [0x7f5e04cac19e]]
> Aborted
> 
> 
> I added option below when the process is starting in the docker.
>  dv_flow_en=0 \
>  --log-level=pmd,8 \
> < MLX5 log >
> 415a695ba348:/tmp/logs # cat epp.log 
> MIDHAUL_PCI_ADDR:0000:12:01.0, BACKHAUL_PCI_ADDR:0000:12:01.1
> MIDHAUL_IP_ADDR:10.255.21.177, BACKHAUL_IP_ADDR:10.255.21.178
> mlx5_pci: unable to recognize master/representors on the multiple IB devices
> common_mlx5: Failed to load driver = mlx5_pci.
> 
> EAL: Requested device 0000:12:01.0 cannot be used
> mlx5_pci: unable to recognize master/representors on the multiple IB devices
> common_mlx5: Failed to load driver = mlx5_pci.
> 
> EAL: Requested device 0000:12:01.1 cannot be used
> EAL: Bus (pci) probe failed.
> EAL: Trying to obtain current memory policy.
> EAL: Setting policy MPOL_PREFERRED for socket 1
> Caught signal 15
> EAL: Restoring previous memory policy: 0
> EAL: Calling mem event callback 'MLX5_MEM_EVENT_CB:(nil)'
> EAL: request: mp_malloc_sync
> EAL: Heap on socket 1 was expanded by 5120MB
> FATAL: epp_init.c::copy_mac_addr:130: Call to rte_eth_dev_get_port_by_name(src_dpdk_dev_name, &port_id) failed: -19 (Unknown error -19), rte_errno=0 (not set)
> 
> Caught signal 6
> Obtained 7 stack frames, tid=713.
> tid=713, /usr/local/bin/ericsson-packet-processor() [0x40a4a4]
> tid=713, /lib64/libpthread.so.0(+0x13f80) [0x7f7e1eae8f80]
> tid=713, /lib64/libc.so.6(gsignal+0x10b) [0x7f7e1c5f818b]
> tid=713, /lib64/libc.so.6(abort+0x175) [0x7f7e1c5f9585]
> tid=713, /usr/local/bin/ericsson-packet-processor(main+0x458) [0x406818]
> tid=713, /lib64/libc.so.6(__libc_start_main+0xed) [0x7f7e1c5e334d]
> tid=713, /usr/local/bin/ericsson-packet-processor(_start+0x2a) [0x4091ca]
> 
> < i40e log >
> cat epp.log 
> MIDHAUL_PCI_ADDR:0000:3b:0d.5, BACKHAUL_PCI_ADDR:0000:3b:0d.4
> MIDHAUL_IP_ADDR:10.51.21.112, BACKHAUL_IP_ADDR:10.51.21.113
> EAL: Trying to obtain current memory policy.
> EAL: Setting policy MPOL_PREFERRED for socket 1
> EAL: Restoring previous memory policy: 0
> EAL: Calling mem event callback 'vfio_mem_event_clb:(nil)'
> EAL: request: mp_malloc_sync
> EAL: Heap on socket 1 was expanded by 5120MB
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 28
> i40e_dev_rx_queue_setup(): Rx Burst Bulk Alloc Preconditions are satisfied. Rx Burst Bulk Alloc function will be used on port=0, queue=0.
> i40e_set_tx_function_flag(): Neither simple nor vector Tx enabled on Tx queue 0
> 
> i40evf_dev_start(): >>
> i40evf_config_rss(): No hash flag is set
> i40e_set_rx_function(): Vector Rx path will be used on port=0.
> i40e_set_tx_function(): Xmit tx finally be used.
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 6
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 7
> i40evf_add_del_all_mac_addr(): add/rm mac:62:64:21:84:83:b0
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 10
> i40evf_dev_rx_queue_start(): >>
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 8
> i40evf_handle_pf_event(): VIRTCHNL_EVENT_LINK_CHANGE event
> i40evf_dev_tx_queue_start(): >>
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 8
> i40evf_handle_pf_event(): VIRTCHNL_EVENT_LINK_CHANGE event
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 14
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 14
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 14
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 28
> i40e_dev_rx_queue_setup(): Rx Burst Bulk Alloc Preconditions are satisfied. Rx Burst Bulk Alloc function will be used on port=1, queue=0.
> i40e_set_tx_function_flag(): Neither simple nor vector Tx enabled on Tx queue 0
> 
> i40evf_dev_start(): >>
> i40evf_config_rss(): No hash flag is set
> i40e_set_rx_function(): Vector Rx path will be used on port=1.
> i40e_set_tx_function(): Xmit tx finally be used.
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 6
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 7
> i40evf_add_del_all_mac_addr(): add/rm mac:c2:88:5c:a9:a2:ef
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 10
> i40evf_dev_rx_queue_start(): >>
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 8
> i40evf_handle_pf_event(): VIRTCHNL_EVENT_LINK_CHANGE event
> i40evf_dev_tx_queue_start(): >>
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 8
> i40evf_handle_pf_event(): VIRTCHNL_EVENT_LINK_CHANGE event
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 14
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 14
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 14
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at socket -1
> i40evf_dev_mtu_set(): port 1 must be stopped before configuration
> i40evf_dev_mtu_set(): port 0 must be stopped before configuration
> Caught signal 10
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 15
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 15
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 15
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 15
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 15
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 15
> Caught signal 10
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 15
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 15
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 15
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 15
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 15
> i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported
> i40evf_handle_aq_msg(): adminq response is received, opcode = 15
> 
> 
> process start option which is triggered by shell script is as below.
> 
> < start-epp.sh >
> exec /usr/local/bin/ericsson-packet-processor \
>   $(get_dpdk_core_list_parameter) \
>   $(get_dpdk_mem_parameter) \
>   $(get_dpdk_hugepage_parameters) \
>  -d /usr/local/lib/librte_mempool_ring.so \
>  -d /usr/local/lib/librte_mempool_stack.so \
>  -d /usr/local/lib/librte_net_pcap.so \
>  -d /usr/local/lib/librte_net_i40e.so \
>  -d /usr/local/lib/librte_net_mlx5.so \
>  -d /usr/local/lib/librte_event_dsw.so \
>  $DPDK_PCI_OPTIONS \
>  --vdev=event_dsw0 \
>  --vdev=eth_pcap0,iface=midhaul_edk \
>  --vdev=eth_pcap1,iface=backhaul_edk \
>  --file-prefix=container \
>  --log-level lib.eal:debug \
>  dv_flow_en=0 \
>  --log-level=pmd,8 \
>  -- \
>   $(get_epp_mempool_parameter) \
>  "--neighbor-discovery-interface=midhaul_ker,${MIDHAUL_IP_ADDR},mac_addr_dev=${MIDHAUL_MAC_ADDR_DEV},vr_id=0" \
>  "--neighbor-discovery-interface=backhaul_ker,${BACKHAUL_IP_ADDR},mac_addr_dev=${BACKHAUL_MAC_ADDR_DEV},vr_id=1"
> 
> BR/Jaeeun
> 
> -----Original Message-----
> From: Thomas Monjalon <thomas@monjalon.net> 
> Sent: Wednesday, September 29, 2021 8:16 PM
> To: Jaeeun Ham <jaeeun.ham@ericsson.com>
> Cc: users@dpdk.org; alialnu@nvidia.com; rasland@nvidia.com; asafp@nvidia.com
> Subject: Re: I need DPDK MLX5 Probe error support
> 
> 27/09/2021 02:18, Jaeeun Ham:
> > Hi,
> > 
> > I hope you are well.
> > My name is Jaeeun Ham and I have been working for the Ericsson.
> > 
> > I am suffering from enabling MLX5 NIC, so could you take a look at how to run it?
> > There are two pci address for the SRIOV(vfio) mlx5 nic support but it 
> > doesn't run correctly. (12:01.0, 12:01.1)
> > 
> > I started one process which is running inside the docker process that is on the MLX5 NIC support host server.
> > The process started to run with following option.
> >     -d /usr/local/lib/librte_net_mlx5.so And the docker process has 
> > mlx5 libraries as below.
> 
> Did you try on the host outside of any container?
> 
> Please could you try following commands (variables to be replaced)?
> 
>     dpdk-hugepages.py --reserve 1G
>     ip link set $netdev netns $container
>     docker run --cap-add SYS_NICE --cap-add IPC_LOCK --cap-add NET_ADMIN \
>                --device /dev/infiniband/ $image
>     echo show port summary all | dpdk-testpmd --in-memory -- -i
> 
> 
> 
> > 706a37a35d29:/usr/local/lib # ls -1 | grep mlx librte_common_mlx5.so
> > librte_common_mlx5.so.21
> > librte_common_mlx5.so.21.0
> > librte_net_mlx5.so
> > librte_net_mlx5.so.21
> > librte_net_mlx5.so.21.0
> > 
> > But I failed to run the process with following error. 
> > (MIDHAUL_PCI_ADDR:0000:12:01.0, BACKHAUL_PCI_ADDR:0000:12:01.1)
> > 
> > ---
> > 
> > mlx5_pci: unable to recognize master/representors on the multiple IB 
> > devices
> > common_mlx5: Failed to load driver = mlx5_pci.
> > EAL: Requested device 0000:12:01.0 cannot be used
> > mlx5_pci: unable to recognize master/representors on the multiple IB 
> > devices
> > common_mlx5: Failed to load driver = mlx5_pci.
> > EAL: Requested device 0000:12:01.1 cannot be used
> > EAL: Bus (pci) probe failed.
> > 
> > ---
> > 
> > For the success case of pci address 12:01.2, it showed following messages.
> > 
> > ---
> > 
> > EAL: Detected 64 lcore(s)
> > EAL: Detected 2 NUMA nodes
> > EAL: Multi-process socket /var/run/dpdk/nah2/mp_socket
> > EAL: Probing VFIO support...
> > EAL: VFIO support initialized
> > EAL: PCI device 0000:12:01.2 on NUMA socket 0
> > EAL:   probe driver: 15b3:1016 net_mlx5
> > net_mlx5: MPLS over GRE/UDP tunnel offloading disabled due to old 
> > OFED/rdma-core version or firmware configuration
> > net_mlx5: port 0 the requested maximum Rx packet size (2056) is larger 
> > than a single mbuf (2048) and scattered mode has not been requested
> > USER1: rte_ip_frag_table_create: allocated of 6291584 bytes at socket 
> > 0
> > 
> > ---
> > 
> > BR/Jaeeun
>