DPDK usage discussions
 help / color / mirror / Atom feed
* [dpdk-users] Can't start DPDK applications on Mellanox ConnectX-4 card
@ 2020-01-03 10:40 Sebastian Bernauer
  2020-01-03 15:08 ` Sebastian Bernauer
  0 siblings, 1 reply; 5+ messages in thread
From: Sebastian Bernauer @ 2020-01-03 10:40 UTC (permalink / raw)
  To: users

Hello DPDK team,

I have 2 Mellanox ConnectX-4 MCX415A-CCAT cards connected with DAC (firmware 12.26.4012). Im using debian stretch and DPDK 19.11.
If i try to start DPDK-applications i get the following error:

sbernauer@he37:~$ lspci | grep Mellanox
04:00.0 Ethernet controller: Mellanox Technologies MT27700 Family [ConnectX-4]
42:00.0 Network controller: Mellanox Technologies MT27500 Family [ConnectX-3]

sbernauer@he37:~$ sudo dpdk-19.11/examples/l2fwd/build/app/l2fwd -w 04:00.0 -- -p 0x1
EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: No available hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: PCI device 0000:04:00.0 on NUMA socket 0
EAL:   probe driver: 15b3:1013 net_mlx5
MAC updating enabled
Notice: odd number of ports in portmask.
Lcore 0: RX port 0
Initializing port 0... EAL: Error - exiting with code: 1
  Cause: rte_eth_dev_start:err=-12, port=0

I can't find a description of the error code -12, can you please give my a hint whats my problem?

Thanks a lot!
Sebastian

^ permalink raw reply	[flat|nested] 5+ messages in thread
* [dpdk-users] Can't start DPDK applications on Mellanox ConnectX-4 card
@ 2020-01-03 10:40 Sebastian Bernauer
  0 siblings, 0 replies; 5+ messages in thread
From: Sebastian Bernauer @ 2020-01-03 10:40 UTC (permalink / raw)
  To: users

Hello DPDK team,

I have 2 Mellanox ConnectX-4 MCX415A-CCAT cards connected with DAC 
(firmware 12.26.4012). Im using debian stretch and DPDK 19.11.
If i try to start DPDK-applications i get the following error:

sbernauer@he37:~$ lspci | grep Mellanox
04:00.0 Ethernet controller: Mellanox Technologies MT27700 Family 
[ConnectX-4]
42:00.0 Network controller: Mellanox Technologies MT27500 Family 
[ConnectX-3]
sbernauer@he37:~$ sudo dpdk-19.11/examples/l2fwd/build/app/l2fwd -w 
04:00.0 -- -p 0x1
EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: No available hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: PCI device 0000:04:00.0 on NUMA socket 0
EAL:   probe driver: 15b3:1013 net_mlx5
MAC updating enabled
Notice: odd number of ports in portmask.
Lcore 0: RX port 0
Initializing port 0... EAL: Error - exiting with code: 1
   Cause: rte_eth_dev_start:err=-12, port=0

I can't find a description of the error code -12, can you please give my 
a hint whats my problem?

Thanks a lot!
Sebastian


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2020-01-07 15:20 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-03 10:40 [dpdk-users] Can't start DPDK applications on Mellanox ConnectX-4 card Sebastian Bernauer
2020-01-03 15:08 ` Sebastian Bernauer
2020-01-05  7:09   ` Ori Kam
2020-01-07 15:20     ` Sebastian Bernauer
  -- strict thread matches above, loose matches on Subject: below --
2020-01-03 10:40 Sebastian Bernauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).