DPDK usage discussions
 help / color / mirror / Atom feed
From: Erfan Mozaffariahrar <erfan.mozaffariahrar@uni-tuebingen.de>
To: Nishant Verma <vnish11@gmail.com>
Cc: USERS <users@dpdk.org>
Subject: Re: [dpdk-users] PCI device 0000:01:00.0 on NUMA socket -1 && !PANIC!: *** Did not find any ports to use ***
Date: Mon, 06 Jul 2020 16:21:12 +0200	[thread overview]
Message-ID: <20200706162112.Horde.BhZRgM2aZTU0_bELaJfpzgm@webmail.uni-tuebingen.de> (raw)
In-Reply-To: <CAHhCjUFaSz-N4T8gxRxDZxo4RoDcUiyLA+M7Sz8gG1gLiyx2Hw@mail.gmail.com>

Quoting Nishant Verma <vnish11@gmail.com>:

> Ok. In that. case your hello world program is good. The output that you are
> seeing is correct.

So what is the meaning of these messages? "PCI device 0000:01:00.0 on  
NUMA socket -1"

> Coming to pktgen, share your default.cfg and output of `lspci | grep Ether"

DEFAULT.CFG:

setup = {
    'exec': (
        'sudo', '-E'
        ),

    'devices': (
           '01:00.0',
           '01:00.1',
           '01:00.2',
           '01:00.3'
            ),
    # UIO module type, igb_uio, vfio-pci or uio_pci_generic
    'uio': 'vfio-pci'
    }

run = {
        .
        .
        .

        'cores': '0-3',
        'nrank': '4',
        'proc': 'auto',
        'log': '7',
        'prefix': 'pg',

        'blacklist': (
                #'03:00.0', '05:00.0',
                #'81:00.0', '84:00.0'
                ),
        'whitelist': (
                '05:00.0,safe-mode-support=1',
                '84:00.0,safe-mode-support=1',
                '03:00.0', '81:00.0'
                ),

        'opts': (
                '-v',
                '-T',
                '-P',
                '-j',
                ),
        'map': (
                '[1].1',
                '[2].2',
                '[3].3'
                ),

        'theme': 'themes/black-yellow.theme'
        }

LSPCI | GREP ETHER:

00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network  
Connection (Lewisville) (rev 04)
01:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network  
Connection (rev 01)
01:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network  
Connection (rev 01)
01:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network  
Connection (rev 01)
01:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network  
Connection (rev 01)

I couldn't find a manual for default.cfg. So I don't know the details. :(

Thanks,
Erfan

>
> On Mon, Jul 6, 2020 at 9:51 AM Erfan Mozaffariahrar <
> erfan.mozaffariahrar@uni-tuebingen.de> wrote:
>
>> Dear Nishant,
>>
>>
>> Quoting Nishant Verma <vnish11@gmail.com>:
>>
>> > Hi Erfan,
>> >
>> > It would be great if you let us know how you are planning to execute
>> > helloworld and pktgen.
>> > Because HelloWorld is a demo app just to show core functionality nothing
>> > else, while pktgen can be used for all sorts of packet related
>> operations.
>> >
>>
>> I used this documentation
>> https://doc.dpdk.org/guides/linux_gsg/index.html for Linux.
>> I also tried to run pktgen using the following guide:
>> https://pktgen-dpdk.readthedocs.io/en/latest/
>> I just wanted to get familiar with the DPDK.
>> My goal is to have a DPDK platform to evaluate different algorithms
>> and also for vSwitches.
>>
>> > One more thing, if you have allocated ports to one DPDK application then
>> > you can't allocate those ports to any application. For example, if one
>> > application is using one PCI then for another application that will be
>> > blacklisted.
>>
>> I didn't run them simultaneously. I first ran the helloworld and tried
>> pktgen but failed in both of them.
>>
>>
>> Thanks,
>> Erfan
>> >
>> > Thanks.
>> >
>> > On Mon, Jul 6, 2020 at 6:18 AM Erfan Mozaffariahrar <
>> > erfan.mozaffariahrar@uni-tuebingen.de> wrote:
>> >
>> >> Hey guys,
>> >>
>> >> I'm new at DPDK and want to run helloworld and pktgen applications.
>> >> I have a quad port Intel I350 NIC.
>> >> I binded VFIO-PCI drivers using dpdk-devbind.py
>> >>
>> >>
>> >> ./usertools/dpdk-devbind.py --status
>> >>
>> >> Network devices using DPDK-compatible driver
>> >> ============================================
>> >> 0000:01:00.0 'I350 Gigabit Network Connection 1521' drv=vfio-pci
>> >> unused=igb,uio_pci_generic
>> >> 0000:01:00.1 'I350 Gigabit Network Connection 1521' drv=vfio-pci
>> >> unused=igb,uio_pci_generic
>> >> 0000:01:00.2 'I350 Gigabit Network Connection 1521' drv=vfio-pci
>> >> unused=igb,uio_pci_generic
>> >> 0000:01:00.3 'I350 Gigabit Network Connection 1521' drv=vfio-pci
>> >> unused=igb,uio_pci_generic
>> >>
>> >>
>> >> When I run the helloworld application:
>> >>
>> >> sudo ./build/helloworld -l 0-3 -n 1
>> >> EAL: Detected 4 lcore(s)
>> >> EAL: Detected 1 NUMA nodes
>> >> EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>> >> EAL: Selected IOVA mode 'PA'
>> >> EAL: Probing VFIO support...
>> >> EAL: VFIO support initialized
>> >> EAL: PCI device 0000:00:19.0 on NUMA socket -1
>> >> EAL:   Invalid NUMA socket, default to 0
>> >> EAL:   probe driver: 8086:1502 net_e1000_em
>> >> EAL: PCI device 0000:01:00.0 on NUMA socket -1
>> >> EAL:   Invalid NUMA socket, default to 0
>> >> EAL:   probe driver: 8086:1521 net_e1000_igb
>> >> EAL:   using IOMMU type 8 (No-IOMMU)
>> >> EAL: PCI device 0000:01:00.1 on NUMA socket -1
>> >> EAL:   Invalid NUMA socket, default to 0
>> >> EAL:   probe driver: 8086:1521 net_e1000_igb
>> >> EAL: PCI device 0000:01:00.2 on NUMA socket -1
>> >> EAL:   Invalid NUMA socket, default to 0
>> >> EAL:   probe driver: 8086:1521 net_e1000_igb
>> >> EAL: PCI device 0000:01:00.3 on NUMA socket -1
>> >> EAL:   Invalid NUMA socket, default to 0
>> >> EAL:   probe driver: 8086:1521 net_e1000_igb
>> >> hello from core 1
>> >> hello from core 2
>> >> hello from core 3
>> >> hello from core 0
>> >>
>> >> ****
>> >>
>> >> Running pktgen:
>> >>
>> >> >>> sdk '/home/mozaffari/dpdk-20.02', target 'x86_64-native-linux-gcc'
>> >> Setup DPDK to run 'pktgen' application from cfg/default.cfg file
>> >> mozaffari@mozaffari-2:~/pktgen-dpdk$ ./tools/run.py default
>> >> >>> sdk '/home/mozaffari/dpdk-20.02', target 'x86_64-native-linux-gcc'
>> >>     Trying ./app/x86_64-native-linux-gcc/pktgen
>> >> sudo -E
>> >>
>> LD_LIBRARY_PATH=/home/mozaffari/dpdk-20.02/x86_64-native-linux-gcc/lib/x86_64-linux-gnu
>> >> ./app/x86_64-native-linux-gcc/pktgen -l 0-3 -n 4 --proc-type auto
>> >> --log-level 7 --file-prefix pg -w 05:00.0,safe-mode-support=1 -w
>> >> 84:00.0,safe-mode-support=1 -w 03:00.0 -w 81:00.0 -- -v -T -P -j -m
>> [3:4].0
>> >> -m [5:6].1 -m [16:17].2 -m [18:19].3 -f
>> >> themes/black-yellow.theme
>> >>
>> >> Copyright (c) <2010-2019>, Intel Corporation. All rights reserved.
>> >> Powered by DPDK
>> >> EAL: Detected 4 lcore(s)
>> >> EAL: Detected 1 NUMA nodes
>> >> EAL: Auto-detected process type: PRIMARY
>> >> EAL: Multi-process socket /var/run/dpdk/pg/mp_socket
>> >> EAL: Selected IOVA mode 'VA'
>> >> EAL: Probing VFIO support...
>> >> EAL: VFIO support initialized
>> >> Lua 5.3.3  Copyright (C) 1994-2016 Lua.org, PUC-Rio
>> >> **** Jumbo Frames of 9618 enabled.
>> >>
>> >> *** Copyright (c) <2010-2019>, Intel Corporation. All rights reserved.
>> >> *** Pktgen created by: Keith Wiles -- >>> Powered by DPDK <<<
>> >>
>> >> >>> Packet Burst 64, RX Desc 1024, TX Desc 2048, mbufs/port 16384,
>> >> >>> mbuf cache 2048
>> >>   Port: Name         IfIndex Alias        NUMA  PCI
>> >>
>> >> !PANIC!: *** Did not find any ports to use ***
>> >> PANIC in pktgen_config_ports():
>> >> *** Did not find any ports to use ***
>> >> 6: [./app/x86_64-native-linux-gcc/pktgen(_start+0x2a) [0x560ab1edd76a]]
>> >> 5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe7)
>> >> [0x7f9e0d7beb97]]
>> >> 4: [./app/x86_64-native-linux-gcc/pktgen(main+0x9d4) [0x560ab1d054a4]]
>> >> 3: [./app/x86_64-native-linux-gcc/pktgen(pktgen_config_ports+0x2471)
>> >> [0x560ab1f12f51]]
>> >> 2: [./app/x86_64-native-linux-gcc/pktgen(__rte_panic+0xc5)
>> >> [0x560ab1cf3da1]]
>> >> 1: [./app/x86_64-native-linux-gcc/pktgen(rte_dump_stack+0x2e)
>> >> [0x560ab20f105e]]
>> >>
>> >>
>> >>
>> >> I searched previous emails but couldn't figure out the problems.
>> >>
>> >> I would be thankful if you could help me to resolve it.
>> >>
>> >>
>> >> Best regards,
>> >> Erfan
>> >>
>> >>
>> >>
>> >> --
>> >> Erfan Mozaffariahrar, M.Sc.
>> >> University of Tuebingen
>> >> Faculty of Science
>> >> Department of Computer Science
>> >> Chair of Communication Networks
>> >> Room B309, Sand 13, 72076 Tuebingen, Germany
>> >> phone:  (+49)-7071/29-70512
>> >> mailto: erfan.mozaffariahrar@uni-tuebingen.de
>> >> http://kn.inf.uni-tuebingen.de
>> >>
>> >>
>> >
>> > --
>> > Rgds,
>> > Nishant
>>
>>
>>
>> --
>> Erfan Mozaffariahrar, M.Sc.
>> University of Tuebingen
>> Faculty of Science
>> Department of Computer Science
>> Chair of Communication Networks
>> Room B309, Sand 13, 72076 Tuebingen, Germany
>> phone:  (+49)-7071/29-70512
>> mailto: erfan.mozaffariahrar@uni-tuebingen.de
>> http://kn.inf.uni-tuebingen.de
>>
>>
>
> --
> Rgds,
> Nishant
  Erfan Mozaffariahrar, M.Sc.
University of Tuebingen
Faculty of Science
Department of Computer Science
Chair of Communication Networks
Room B309, Sand 13, 72076 Tuebingen, Germany
phone:  (+49)-7071/29-70512
mailto: erfan.mozaffariahrar@uni-tuebingen.de
http://kn.inf.uni-tuebingen.de

      reply	other threads:[~2020-07-06 14:21 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-06 10:18 Erfan Mozaffariahrar
2020-07-06 10:44 ` Nishant Verma
2020-07-06 13:51   ` Erfan Mozaffariahrar
2020-07-06 14:03     ` Nishant Verma
2020-07-06 14:21       ` Erfan Mozaffariahrar [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200706162112.Horde.BhZRgM2aZTU0_bELaJfpzgm@webmail.uni-tuebingen.de \
    --to=erfan.mozaffariahrar@uni-tuebingen.de \
    --cc=users@dpdk.org \
    --cc=vnish11@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).