* DPDK bond can not start in SR-IOV
@ 2022-01-19 3:49 zhanggongqin
0 siblings, 0 replies; only message in thread
From: zhanggongqin @ 2022-01-19 3:49 UTC (permalink / raw)
To: users
[-- Attachment #1: Type: text/plain, Size: 5020 bytes --]
Hi:
I have a question about the dpdk bond. My Openstack vm use 4 vfs support by SR-IOV. And i can not start dpdk-testpmd with dpdk bond mode 1. The error is "i40evf_dev_tx_queue_start(): Failed to switch TX queue 0 on".
My host environment is:
Two Intel x710 NIC, and slicing each NIC to 16 vfs. My VM use 4 vfs like this:
[root@overcloud-computelowconfig-0 ~]# ip link show ens2f0
8: ens2f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 6c:fe:54:01:12:30 brd ff:ff:ff:ff:ff:ff
vf 0 link/ether fa:16:3e:04:1d:fd brd ff:ff:ff:ff:ff:ff, vlan 362, spoof checking off, link-state enable, trust off
……
vf 14 link/ether fa:16:3e:96:9f:4a brd ff:ff:ff:ff:ff:ff, vlan 361, spoof checking off, link-state enable, trust off
[root@overcloud-computelowconfig-0 ~]# ip link show ens2f1
9: ens2f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
vf 12 link/ether fa:16:3e:bc:9a:2f brd ff:ff:ff:ff:ff:ff, vlan 362, spoof checking off, link-state enable, trust off
……
vf 14 link/ether fa:16:3e:63:4b:e9 brd ff:ff:ff:ff:ff:ff, vlan 361, spoof checking off, link-state enable, trust off
My vm environment is:
DPDK version dpdk-21.02.
[root@sriovtest-upf-42-gsu-0 app]# dpdk_nic_bind.py --status
Network devices using DPDK-compatible driver
============================================
0000:00:09.0 'XL710/X710 Virtual Function' drv=igb_uio unused=i40evf
0000:00:0a.0 'XL710/X710 Virtual Function' drv=igb_uio unused=i40evf
0000:00:0b.0 'XL710/X710 Virtual Function' drv=igb_uio unused=i40evf
0000:00:0c.0 'XL710/X710 Virtual Function' drv=igb_uio unused=i40evf
My error is:
[root@sriovtest-upf-42-gsu-0 app]# ./dpdk-testpmd -l 1-4 -n 4 --vdev 'net_bonding0,mode=1,slave=0000:00:0a.0,slave=0000:00:0c.0,primary=0000:00:0a.0' -- --port-topology=chained
EAL: Detected 16 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: No available 1048576 kB hugepages reported
EAL: Probing VFIO support...
EAL: Invalid NUMA socket, default to 0
EAL: Probe PCI driver: net_virtio (1af4:1000) device: 0000:00:03.0 (socket 0)
eth_virtio_pci_init(): Failed to init PCI device
EAL: Requested device 0000:00:03.0 cannot be used
EAL: Invalid NUMA socket, default to 0
EAL: Probe PCI driver: net_virtio (1af4:1000) device: 0000:00:04.0 (socket 0)
eth_virtio_pci_init(): Failed to init PCI device
EAL: Requested device 0000:00:04.0 cannot be used
EAL: Invalid NUMA socket, default to 0
EAL: Probe PCI driver: net_virtio (1af4:1000) device: 0000:00:05.0 (socket 0)
eth_virtio_pci_init(): Failed to init PCI device
EAL: Requested device 0000:00:05.0 cannot be used
EAL: Invalid NUMA socket, default to 0
EAL: Probe PCI driver: net_virtio (1af4:1000) device: 0000:00:06.0 (socket 0)
eth_virtio_pci_init(): Failed to init PCI device
EAL: Requested device 0000:00:06.0 cannot be used
EAL: Invalid NUMA socket, default to 0
EAL: Probe PCI driver: net_i40e_vf (8086:154c) device: 0000:00:09.0 (socket 0)
EAL: Invalid NUMA socket, default to 0
EAL: Probe PCI driver: net_i40e_vf (8086:154c) device: 0000:00:0a.0 (socket 0)
EAL: Invalid NUMA socket, default to 0
EAL: Probe PCI driver: net_i40e_vf (8086:154c) device: 0000:00:0b.0 (socket 0)
EAL: Invalid NUMA socket, default to 0
EAL: Probe PCI driver: net_i40e_vf (8086:154c) device: 0000:00:0c.0 (socket 0)
EAL: No legacy callbacks, legacy socket not created
testpmd: create a new mbuf pool <mb_pool_0>: n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Port 3: link state change event
Configuring Port 0 (socket 0)
Port 0: link state change event
Port 0: link state change event
Port 0: FA:16:3E:96:9F:4A
Configuring Port 1 (socket 0)
Port 1: link state change event
Port 1: link state change event
Port 1: FA:16:3E:04:1D:FD
Configuring Port 2 (socket 0)
Port 2: link state change event
Port 2: link state change event
Port 2: FA:16:3E:63:4B:E9
Configuring Port 3 (socket 0)
Port 3: link state change event
Port 3: link state change event
Port 3: FA:16:3E:BC:9A:2F
Configuring Port 4 (socket 0)
Port 1: link state change event
_i40evf_execute_vf_cmd(): No response for 8
i40evf_switch_queue(): Fail to switch TX 0 on
i40evf_dev_tx_queue_start(): Failed to switch TX queue 0 on
i40evf_start_queues(): Fail to start queue 0
i40evf_dev_start(): enable queues failed
_i40evf_execute_vf_cmd(): No response for 11
i40evf_add_del_all_mac_addr(): fail to execute command OP_DEL_ETHER_ADDRESS
slave_configure(1829) - rte_eth_dev_start: port=1, err (-1)
bond_ethdev_start(2002) - bonded port (4) failed to reconfigure slave device (1)
Fail to start port 4
So, how can i fix this error?
I look forward to hearing from you soon.
zhanggongqin@bjcktech.com
[-- Attachment #2: Type: text/html, Size: 7125 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2022-01-19 9:02 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-19 3:49 DPDK bond can not start in SR-IOV zhanggongqin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).