Did you try to set DEV_TX_OFFLOAD_MULTI_SEGS in txmode.offloads ?

Regards,

Robert

From: "Lombardo, Ed" <Ed.Lombardo@netscout.com>
Date: Friday, July 26, 2024 at 3:30 PM
To: "users@dpdk.org" <users@dpdk.org>
Subject: prepend mbuf to another mbuf

Hi,

I have an issue with retransmitting a received packet with encapsulation headers prepended to original received packet when using E810 NIC for transmit.

I have received a packet and is stored in one or more mbufs.  To do encapsulation I am acquiring a mbuf from free pool.  The new mbuf is where I add the L2 Header, IPv4 header and GRE header.  I update the mbuf with rte_mbuf_refcnt_set(new_mbuf, 1) and rte_mbuf_refcnt_update(mbuf, 1); and then fill in the new mbuf metadata like (nb_segs, pkt_len, port, mbuf->next, etc) from the original mbuf.

When I test this feature in VMWare with VMXNET3 vnic it works perfectly, the packet is transmitted with the encapsulation headers ahead of the original packet seen at the endpoint.

When I test same on Intel E810 only the first mbuf of data is transmitted, the original packet data from remaining mbufs is not transmitted.

I compared the mbufs just prior to transmit, byte by byte, in the VMXNET3 and E810 NIC cases and they are identical, the code path is the same.

I also tried dpdk 17.11 and dpdk 22.11 versions with same results.

Also same test fails with Intel X710 and X540 NICs similar to way E810 fails.

I modified the code to insert the encapsulation headers in the headroom of the original mbuf and it worked perfectly.

What could be the issue with the Intel NICs when transmitting a chain of mbufs, where the first mbuf has only the L2 header, IPv4 header and GRE header and remaining mbuf(s) contain the original packet data?

Thanks,

Ed