Re: help

[Thomas Monjalon <thomas@monjalon.net>]

20/07/2023 11:35, Igor de Paula:
> The weird thing is that it only happens when I am using a host with an AMD
> processor. It doesn't happen when I use a host with an Intel processor.

So it's probably a matter of BIOS settings for the IOMMU?


> On Thu, Jul 20, 2023 at 10:32 AM Thomas Monjalon <thomas@monjalon.net>
> wrote:
> 
> > +Cc the vmxnet3 maintainer.
> >
> > Please Jochen, do you have an idea what's wrong below?
> >
> >
> > 20/07/2023 11:25, Igor de Paula:
> > > This is because it can't negotiate the IOMMU type with any port.
> > >
> > > On Thu, Jul 20, 2023 at 5:08 AM Thomas Monjalon <thomas@monjalon.net>
> > wrote:
> > >
> > > > Hello,
> > > >
> > > > The first error is "Cause: Error: number of ports must be even"
> > > >
> > > >
> > > > 03/05/2023 18:13, Igor de Paula:
> > > > > I am running a VM inside a VMWARE server (vSphere).
> > > > > My goal it to set up DPDK with two HW ports, and set up a
> > virtio_user to
> > > > > interact with the kernel stack.
> > > > > In another app I have it working but instead of virtio_user I am
> > running
> > > > > KNI, it works in IOVA-PA mode.
> > > > > I am looking to replace the KNI.
> > > > >
> > > > > When I try to set up virtio_user port as in the doc:
> > > > >
> > > >
> > https://doc.dpdk.org/guides/howto/virtio_user_as_exception_path.html#virtio-user-as-exception-path
> > > > > I get a error it can't run in PA mode.
> > > > >
> > > > >
> > > > > When I try to run as VA mode from a parameter, I get the following
> > > > errors:
> > > > > EAL: lib.eal log level changed from info to debug
> > > > > EAL: Detected lcore 0 as core 0 on socket 0
> > > > > EAL: Detected lcore 1 as core 0 on socket 0
> > > > > EAL: Support maximum 128 logical core(s) by configuration.
> > > > > EAL: Detected 2 lcore(s)
> > > > > EAL: Detected 1 NUMA nodes
> > > > > EAL: Checking presence of .so 'librte_eal.so.21.3'
> > > > > EAL: Checking presence of .so 'librte_eal.so.21'
> > > > > EAL: Checking presence of .so 'librte_eal.so'
> > > > > EAL: Detected static linkage of DPDK
> > > > > EAL: Ask a virtual area of 0x7000 bytes
> > > > > EAL: Virtual area found at 0x100000000 (size = 0x7000)
> > > > > EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
> > > > > EAL: DPAA Bus not present. Skipping.
> > > > > EAL: VFIO PCI modules not loaded
> > > > > EAL: Selected IOVA mode 'VA'
> > > > > EAL: Probing VFIO support...
> > > > > EAL: IOMMU type 1 (Type 1) is supported
> > > > > EAL: IOMMU type 7 (sPAPR) is not supported
> > > > > EAL: IOMMU type 8 (No-IOMMU) is supported
> > > > > EAL: VFIO support initialized
> > > > > EAL: Ask a virtual area of 0x5b000 bytes
> > > > > EAL: Virtual area found at 0x100007000 (size = 0x5b000)
> > > > > EAL: Setting up physically contiguous memory...
> > > > > EAL: Setting maximum number of open files to 1048576
> > > > > EAL: Detected memory type: socket_id:0 hugepage_sz:1073741824
> > > > > EAL: Creating 2 segment lists: n_segs:128 socket_id:0
> > > > hugepage_sz:1073741824
> > > > > EAL: Ask a virtual area of 0x2000 bytes
> > > > > EAL: Virtual area found at 0x100062000 (size = 0x2000)
> > > > > EAL: Memseg list allocated at socket 0, page size 0x100000kB
> > > > > EAL: Ask a virtual area of 0x2000000000 bytes
> > > > > EAL: Virtual area found at 0x140000000 (size = 0x2000000000)
> > > > > EAL: VA reserved for memseg list at 0x140000000, size 2000000000
> > > > > EAL: Ask a virtual area of 0x2000 bytes
> > > > > EAL: Virtual area found at 0x2140000000 (size = 0x2000)
> > > > > EAL: Memseg list allocated at socket 0, page size 0x100000kB
> > > > > EAL: Ask a virtual area of 0x2000000000 bytes
> > > > > EAL: Virtual area found at 0x2180000000 (size = 0x2000000000)
> > > > > EAL: VA reserved for memseg list at 0x2180000000, size 2000000000
> > > > > EAL: TSC frequency is ~2350000 KHz
> > > > > EAL: Main lcore 0 is ready (tid=7f8ad790ec00;cpuset=[0])
> > > > > EAL: lcore 1 is ready (tid=7f8ad6907400;cpuset=[1])
> > > > > EAL: Trying to obtain current memory policy.
> > > > > EAL: Setting policy MPOL_PREFERRED for socket 0
> > > > > EAL: Restoring previous memory policy: 0
> > > > > EAL: request: mp_malloc_sync
> > > > > EAL: Heap on socket 0 was expanded by 1024MB
> > > > > EAL: PCI device 0000:0b:00.0 on NUMA socket -1
> > > > > EAL:   probe driver: 15ad:7b0 net_vmxnet3
> > > > > EAL:   Expecting 'PA' IOVA mode but current mode is 'VA', not
> > > > initializing
> > > > > EAL: Requested device 0000:0b:00.0 cannot be used
> > > > > EAL: PCI device 0000:13:00.0 on NUMA socket -1
> > > > > EAL:   probe driver: 15ad:7b0 net_vmxnet3
> > > > > EAL:   Expecting 'PA' IOVA mode but current mode is 'VA', not
> > > > initializing
> > > > > EAL: Requested device 0000:13:00.0 cannot be used
> > > > > EAL: Bus (pci) probe failed.
> > > > > EAL: lib.telemetry log level changed from disabled to warning
> > > > > EAL: Error - exiting with code: 1
> > > > >   Cause: Error: number of ports must be even
> > > > > EAL: request: mp_malloc_sync
> > > > > EAL: Heap on socket 0 was shrunk by 1024MB
> > > > >
> > > > >
> > > > >
> > > > > For some reason the HW ports won't setup. From what I understand
> > > > > net_vmxnet3 should work with VA mode.
> > > > > I enabled I/OMUU for the VM.
> > > > > The weird thing even when enabled, I still have the
> > > > > enable_unsafe_noiommu_mode flag on.
> > > > > And because it's on the this:
> > > > >
> > > > > dev_iova_mode = pci_device_iova_mode(dr, dev);
> > > > >
> > > > > return PA mode, and it fails.
> > > > >
> > > > > When I disable it by modifying
> > > > > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode, I get another
> > > > error.
> > > > > The error is that it doesn't find a suitable IOMMU type:
> > > > > Just putting the relevant message:
> > > > >
> > > > >
> > > > > EAL: Heap on socket 0 was expanded by 1024MB
> > > > > EAL: PCI device 0000:0b:00.0 on NUMA socket -1
> > > > > EAL:   probe driver: 15ad:7b0 net_vmxnet3
> > > > > EAL: Set IOMMU type 1 (Type 1) failed, error 19 (No such device)
> > > > > EAL: Set IOMMU type 7 (sPAPR) failed, error 19 (No such device)
> > > > > EAL: Set IOMMU type 8 (No-IOMMU) failed, error 19 (No such device)
> > > > > EAL: 0000:0b:00.0 failed to select IOMMU type
> > > > > EAL: Requested device 0000:0b:00.0 cannot be used
> > > > > EAL: PCI device 0000:13:00.0 on NUMA socket -1
> > > > > EAL:   probe driver: 15ad:7b0 net_vmxnet3
> > > > > EAL: Set IOMMU type 1 (Type 1) failed, error 19 (No such device)
> > > > > EAL: Set IOMMU type 7 (sPAPR) failed, error 19 (No such device)
> > > > > EAL: Set IOMMU type 8 (No-IOMMU) failed, error 19 (No such device)
> > > > > EAL: 0000:13:00.0 failed to select IOMMU type
> > > > > EAL: Requested device 0000:13:00.0 cannot be used
> > > > >
> > > > >
> > > > > I can see where it fails:
> > > > >
> > > > >
> > > > > const struct vfio_iommu_type *
> > > > > vfio_set_iommu_type(int vfio_container_fd)
> > > > > {
> > > > > unsigned idx;
> > > > > for (idx = 0; idx < RTE_DIM(iommu_types); idx++) {
> > > > > const struct vfio_iommu_type *t = &iommu_types[idx];
> > > > >
> > > > > int ret = ioctl(vfio_container_fd, VFIO_SET_IOMMU,
> > > > > t->type_id);
> > > > > if (!ret) {
> > > > > RTE_LOG(INFO, EAL, "Using IOMMU type %d (%s)\n",
> > > > > t->type_id, t->name);
> > > > > return t;
> > > > > }
> > > > > /* not an error, there may be more supported IOMMU types */
> > > > > RTE_LOG(DEBUG, EAL, "Set IOMMU type %d (%s) failed, error "
> > > > > "%i (%s)\n", t->type_id, t->name, errno,
> > > > > strerror(errno));
> > > > > }
> > > > > /* if we didn't find a suitable IOMMU type, fail */
> > > > > return NULL;
> > > > > }
> > > > >
> > > > >
> > > > > The ioctl returns -1.
> > > > >
> > > > >
> > > > >
> > > > > I tried many things.
> > > > > Enabling/disabling IOMMU.
> > > > > Modifying the enable_unsafe_noiommu_mode flag.
> > > > > Running in PA mode.
> > > > > Any help will be much appreciated.