RE: why rte_power_ethdev_pmgmt_queue_enable need to check if other queues are stopped

["Xiaoping Yan (NSB)" <xiaoping.yan@nokia-sbell.com>]

[-- Attachment #1: Type: text/plain, Size: 2772 bytes --]

Hi,

Thank you for the information.
I see from rte_eth_add_rx_callback, the callback is added to per queue data: rte_eth_devices[port_id].post_rx_burst_cbs[queue_id];
So it should not affect polling on other queues?


Br, Xiaoping

From: Burakov, Anatoly <anatoly.burakov@intel.com>
Sent: 2023年2月20日 18:28
To: Xiaoping Yan (NSB) <xiaoping.yan@nokia-sbell.com>; users@dpdk.org
Subject: RE: why rte_power_ethdev_pmgmt_queue_enable need to check if other queues are stopped

Hi,

It is mainly because we’re install callbacks, which is not thread-safe unless the PMD is stopped. Our PMD’s internal config structures are not thread-safe. You should only start these ports after you configure everything.

From: Xiaoping Yan (NSB) <xiaoping.yan@nokia-sbell.com<mailto:xiaoping.yan@nokia-sbell.com>>
Sent: Monday, February 20, 2023 6:12 AM
To: users@dpdk.org<mailto:users@dpdk.org>; Burakov, Anatoly <anatoly.burakov@intel.com<mailto:anatoly.burakov@intel.com>>
Subject: RE: why rte_power_ethdev_pmgmt_queue_enable need to check if other queues are stopped

Hi Anatoly

I see this multiple queue support is added by you.
Could you kindly help me to understand why rte_power_ethdev_pmgmt_queue_enable need other queues to be in stopped state?

commit 5dff9a72b0efeab02a2b71e52c4871805b7e64cb
Author: Anatoly Burakov anatoly.burakov@intel.com<mailto:anatoly.burakov@intel.com>
Date:   Fri Jul 9 16:08:15 2021 +0000

power: support callbacks for multiple Rx queues


Thank you.

Br, Xiaoping

From: Xiaoping Yan (NSB)
Sent: 2023年2月16日 21:00
To: users@dpdk.org<mailto:users@dpdk.org>
Subject: why rte_power_ethdev_pmgmt_queue_enable need to check if other queues are stopped

Hi experts,

I’m trying to use dpdk power pmd management APIs in my dpdk application.
My application uses several ports, each have one rx queue, and it goes like this

1.     Init first port, setup rx queue, call rte_power_ethdev_pmgmt_queue_enable, and start the first port

2.     Init second port, setup rx queue, call rte_power_ethdev_pmgmt_queue_enable, and start the second port

3.     …
Now for the first port & queue, rte_power_ethdev_pmgmt_queue_enable return success, but for the second port & queue, it returns -16
From rte_power_ethdev_pmgmt_queue_enable code, I think it fails when checking if other queues are stopped as well.
    /* check if other queues are stopped as well */
    ret = cfg_queues_stopped(lcore_cfg);
    if (ret != 1) {
        /* error means invalid queue, 0 means queue wasn't stopped */
        ret = ret < 0 ? -EINVAL : -EBUSY;
        goto end;
    }
This seems quite strange for me, why other queues have to be in stopped state?
Can anyone help to explain?

Thank you.


Br, Xiaoping


[-- Attachment #2: Type: text/html, Size: 16914 bytes --]