Re: [dpdk-users] Request an example config for DPDK IP PIPELINE

["Singh, Jasvinder" <jasvinder.singh@intel.com>]

Hi Royce,
 
> 
> On 25/01/2016 17:21, Royce Niu wrote:
> > $ sudo build/ip_pipeline -f config/l3fwd.cfg -p 0x3 [APP] Initializing
> > CPU core map ...
> > PANIC in app_init_core_mask():
> > Cannot create CPU core mask
> > 6: [build/ip_pipeline() [0x431b43]]
> > 5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5)
> > [0x7f6417199ec5]]
> > 4: [build/ip_pipeline(main+0x5f) [0x4306ff]]
> > 3: [build/ip_pipeline(app_init+0x1bff) [0x43feaf]]
> > 2: [build/ip_pipeline(__rte_panic+0xc9) [0x42b11a]]
> > 1: [build/ip_pipeline(rte_dump_stack+0x1a) [0x4c9fca]]
> >
> > Cfg:
> >
> > [PIPELINE0]
> > type = MASTER
> > core = 0
> >
> > [PIPELINE1]
> > type = PASS-THROUGH
> > core = 1
> > pktq_in = RXQ0.0 RXQ1.0
> > pktq_out = TXQ1.0 TXQ0.0
> >

In the above configuration, you are using two cores. In case, if you are running IP_Pipeline application in VM,  you have to bind right number of cores. To do so, you need to set -smp parameter used in qemu as below- 

–smp sockets=1,cores=2 (in case pipeline app requires more cores to be used, then assign more cores). 

Hope, it will fix the above error.
 
Thanks, 
Jasvinder