Test Case 1: Working Fine

port stop all
flow configure 0 queues_number 9 queues_size 256 conn_tracks_number 4

flow pattern_template 0 create pattern_template_id 2 relaxed true ingress template tcp / end

flow pattern_template 0 create pattern_template_id 4 relaxed true ingress template eth / ipv4 / tcp  / conntrack  spec 1 / end

flow actions_template 0 create actions_template_id 1 template jump group 1 / end mask jump group 1 / end
flow actions_template 0 create actions_template_id 2 template jump group 5 / end mask jump group 5 / end
flow actions_template 0 create actions_template_id 4 template queue index 4 / end mask queue index 4 / end

flow template_table 0 create table_id 1 group 0 ingress rules_number 10 pattern_template 2 actions_template 1
flow template_table 0 create table_id 2 group 1 ingress rules_number 10 pattern_template 2 actions_template 2
flow template_table 0 create table_id 4 group 5 ingress rules_number 10 pattern_template 4 actions_template 4

port start all

set conntrack com peer 0 is_orig 1 enable 1 live 1 sack 1 cack 0 last_dir 1 liberal 0 state 1 max_ack_win 7 r_lim 5 last_win 510 last_seq 2 last_ack 1 last_end 2 last_index 0x2

set conntrack orig scale 7 fin 0 acked 1 unack_data 0 sent_end 2 reply_end 1 max_win 8192  max_ack 2
set conntrack rply scale 7 fin 0 acked 1 unack_data 0 sent_end 2 reply_end 1 max_win 8192 max_ack 1

flow queue 0 indirect_action 0 create action_id 9 ingress postpone no action conntrack / end
flow push 0 queue 0
flow pull 0 queue 0

flow queue 0 create 0 template_table 1 pattern_template 0 actions_template 0 postpone 0 pattern tcp / end actions jump group 1 / end
flow push 0 queue 0
flow pull 0 queue 0

flow queue 0 create 0 template_table 2 pattern_template 0 actions_template 0 postpone 0 pattern tcp  /  end actions indirect 9 / jump group 5 / end
flow push 0 queue 0
flow pull 0 queue 0

flow queue 0 create 0 template_table 4 pattern_template 0 actions_template 0 postpone 0 pattern eth / ipv4 / tcp / conntrack spec 1 / end actions queue index 4 / end
flow push 0 queue 0
flow pull 0 queue 0

Result:
It was observed that the packet was sent to the right queue when the correct packet was sent

Scapy Packet:
sendp( Ether(dst="B8:CE:F6:D2:CD:22",src="aa:bb:cc:dd:ee:ff")/IP()/TCP(dport=5555), iface="enp134s0f0",count=1) --->> redirect the packet to queue 4 for Flow rule 3

sendp( Ether(dst="B8:CE:F6:D2:CD:22",src="aa:bb:cc:dd:ee:ff")/IP()/TCP(dport=1234), iface="enp134s0f0",count=1)  --->> redirect the packet to queue 6  for Flow rule 2

Test Case 2:
This test case has shown strange behavior when we keep everything similar to the above test case and just make changes in the pattern template and rule involving ct the match is not found and the packets are drop

Note: I have Tested this test on the same packets.

The changes We  did our to find an exact match on tcp dst port

flow pattern_template 0 create pattern_template_id 4 relaxed true ingress template eth / ipv4 / tcp  / conntrack  spec 1 / end


flow pattern_template 0 create pattern_template_id 4 relaxed true ingress template eth / ipv4 / tcp  dst is 5555  / conntrack  spec 1 / end

For Flow Rule
flow queue 0 create 0 template_table 4 pattern_template 0 actions_template 0 postpone 0 pattern eth / ipv4 / tcp / conntrack spec 1 / end actions queue index 4 / end

flow queue 0 create 0 template_table 4 pattern_template 0 actions_template 0 postpone 0 pattern eth / ipv4 / tcp dst is 5555 / conntrack spec 1 / end actions queue index 4 / end

Result:
The packets were sent to queue 6 but not to queue for

Scapy Packet:
sendp( Ether(dst="B8:CE:F6:D2:CD:22",src="aa:bb:cc:dd:ee:ff")/IP()/TCP(dport=5555), iface="enp134s0f0",count=1) -- were not redirected  to queue 4 for flow rule

sendp( Ether(dst="B8:CE:F6:D2:CD:22",src="aa:bb:cc:dd:ee:ff")/IP()/TCP(dport=1234), iface="enp134s0f0",count=1)  --were redirected to queue 6  for Flow rule 2.



Test Case 3:
kept the same configuration for this test similar to test 1 except for some minor changes

flow pattern_template 0 create pattern_template_id 4 relaxed true ingress template eth / ipv4 / tcp  / conntrack  spec 1 / end

flow pattern_template 0 create pattern_template_id 4 relaxed true ingress template eth / ipv4 / tcp  / conntrack  is 1 / end

For Flow Rule:
flow queue 0 create 0 template_table 4 pattern_template 0 actions_template 0 postpone 0 pattern eth / ipv4 / tcp / conntrack spec 1 / end actions queue index 4 / end
      

flow queue 0 create 0 template_table 4 pattern_template 0 actions_template 0 postpone 0 pattern eth / ipv4 / tcp dst is 5555 / conntrack is 1 / end actions queue index 4 / end



Result:
The packets were sent to queue 6 but not to queue for

Scapy Packet:
sendp( Ether(dst="B8:CE:F6:D2:CD:22",src="aa:bb:cc:dd:ee:ff")/IP()/TCP(dport=5555), iface="enp134s0f0",count=1) -- were not redirected  to queue 4 for flow rule

sendp( Ether(dst="B8:CE:F6:D2:CD:22",src="aa:bb:cc:dd:ee:ff")/IP()/TCP(dport=1234), iface="enp134s0f0",count=1)  --were redirected to queue 6  for Flow rule 2.


Test Case 4:

In this test case, I have removed the ct object, The indirect action and configuration related to ct

NOTE: Please observe there are no ct object ,indirect action or connection tracking numbers in the following test

port stop all
flow configure 0 queues_number 9 queues_size 256

flow indirect_action 0 destroy action_id 0

flow indirect_action 0 destroy action_id 9


flow pattern_template 0 create pattern_template_id 2 relaxed true ingress template tcp / end
flow pattern_template 0 create pattern_template_id 3 relaxed true ingress template eth / ipv4 / tcp dst is 1234 / end
flow pattern_template 0 create pattern_template_id 4 relaxed true ingress template eth / ipv4 / tcp / conntrack spec 65535 / end



flow actions_template 0 create actions_template_id 1 template jump group 1 / end mask jump group 1 / end
flow actions_template 0 create actions_template_id 2 template jump group 5 / end mask jump group 5 / end
flow actions_template 0 create actions_template_id 3 template queue index 6 / end mask queue index 6 / end
flow actions_template 0 create actions_template_id 4 template queue index 4 / end mask queue index 4 / end


flow template_table 0 create table_id 1 group 0 ingress rules_number 10 pattern_template 2 actions_template 1
flow template_table 0 create table_id 2 group 1 ingress rules_number 10 pattern_template 2 actions_template 2
flow template_table 0 create table_id 3 group 5 ingress rules_number 10 pattern_template 3 actions_template 3
flow template_table 0 create table_id 4 group 5 ingress rules_number 10 pattern_template 4 actions_template 4

port start all



flow queue 0 create 0 template_table 1 pattern_template 0 actions_template 0 postpone 0 pattern tcp / end actions jump group 1 / end
flow push 0 queue 0
flow pull 0 queue 0

flow queue 0 create 0 template_table 2 pattern_template 0 actions_template 0 postpone 0 pattern tcp  /  end actions jump group 5 / end
flow push 0 queue 0
flow pull 0 queue 0

flow queue 0 create 0 template_table 3 pattern_template 0 actions_template 0 postpone 0 pattern eth / ipv4 / tcp dst is 1234 / end actions queue index 6 / end
flow push 0 queue 0
flow pull 0 queue 0

flow queue 0 create 0 template_table 4 pattern_template 0 actions_template 0 postpone 0 pattern eth / ipv4 / tcp  / conntrack spec 65535 / end actions queue index 4 / end
flow push 0 queue 0
flow pull 0 queue 0


set verbose 3
start


Result:
The packets were sent to Queue 6 and Queue 4.
This shouldn't be the case since no ct object was created in the rule and their was no indirect action.

Scapy Packet:
sendp( Ether(dst="B8:CE:F6:D2:CD:22",src="aa:bb:cc:dd:ee:ff")/IP()/TCP(dport=5555), iface="enp134s0f0",count=1) -- were  redirected  to queue 4 for flow rule

sendp( Ether(dst="B8:CE:F6:D2:CD:22",src="aa:bb:cc:dd:ee:ff")/IP()/TCP(dport=1234), iface="enp134s0f0",count=1)  --were redirected to queue 6  for Flow rule 2.


Summary:


  *
Test case 1 worked as it  was intended and packets were redirected to the desired queues
  *
Test Cases 2 and 3 did not work as it was intended when matching on the exact tcp dst port and when the connection tracking keyword is was used.
  *
Test case 4 sent the packet to their desired queues but they shouldn't have because no ct context was created and no indirection action was created

Regards,
Taha




flow pattern_template 0 create pattern_template_id 4 relaxed true ingress template eth / ipv4 / tcp  / conntrack  spec 1 / end





Test Case 1: