From: Verghis Koshi <vkoshi@gmail.com>
To: Igor de Paula <igordptx@gmail.com>
Cc: users@dpdk.org
Subject: Re: Issue with rte_eth_dev_start
Date: Fri, 21 Apr 2023 10:39:41 -0700 [thread overview]
Message-ID: <CAANwsYPVpQ4mBkE4mmPowoivXoc10W3uRQkz=u5e8zZmz_iO6Q@mail.gmail.com> (raw)
In-Reply-To: <CALDr01QVG=TgOYbnT36zdPoREis+bGhBCy+VoZjtxDGmp7eRGA@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4375 bytes --]
Hi Igor,
Just curious, what's your setup? Server or laptop?
Verghis
On Fri, Apr 21, 2023 at 5:37 AM Igor de Paula <igordptx@gmail.com> wrote:
> From what I can tell, dpdk calles the function vfio_disable_msix in the
> stop and start function. The reason it does not happen in start up is that
> I don't call stop before.
> Calling stop and then start calls the function twice. Which maybe
> shouldn't happen... Is it a bug?
>
> On Thu, Apr 20, 2023 at 12:33 PM Igor de Paula <igordptx@gmail.com> wrote:
>
>> Hi,
>> I am having trouble with restarting a HW port allocated to DPDK.
>> I am running the DPDK version: 21.08.0 and Ubuntu 20.04.3 LTS.
>> The driver is : net_e100igb
>> After I start the port with no issues I try to call rte_eth_dev_stop to
>> stop it.
>> When I am ready I call rte_eth_dev_start to start it again an I get the
>> following message:
>> EAL: Error disabling MSI-X interrupts for fd 46.
>> I am not sure what this error is coming from and what it causes.
>> I found little information online. If someone could explain, I would
>> really appreciate it.
>> This is a copy print on setup with no issues:
>> 2023-04-20 11:09:51.703542: Driver: net_e1000_igb
>> 2023-04-20 11:09:51.703546: Bus Id: 0000:01:00.0
>> 2023-04-20 11:09:51.703551: rx offload cap: 280e (92e0f)
>> 2023-04-20 11:09:51.703555: tx offload cap: 8002 (803f)
>> 2023-04-20 11:09:51.703559: NUMA Socket: 0
>> 2023-04-20 11:09:51.703563: MAC Address: b4:96:91:63:62:40
>> 2023-04-20 11:09:51.703568: Max Rx Queue: 8
>> 2023-04-20 11:09:51.703572: Max Tx Queue: 8
>> 2023-04-20 11:09:51.703577: Max Rx Descriptors: 4096
>> 2023-04-20 11:09:51.703581: Max Tx Descriptors: 4096
>> 2023-04-20 11:09:51.703585: Max Rx Packet Length: 16383
>> 2023-04-20 11:09:51.703589: Available Link Speeds: 10Mb/s 100Mb/s
>> 1Gb/s
>> 2023-04-20 11:09:51.703608: Fixed Link Speed: Auto
>> 2023-04-20 11:09:51.703616: Fixed Duplex: Auto
>> 2023-04-20 11:09:51.703623: MTU Set to: 16383
>> 2023-04-20 11:09:51.703632: Actual Rx Descriptors: 4096
>> 2023-04-20 11:09:51.703636: Actual Tx Descriptors: 4096
>> 2023-04-20 11:09:51.703695: Set up 1 send queues
>> 2023-04-20 11:09:51.703700: Actual MTU: 16383
>> 2023-04-20 11:09:51.703704: Actual Linkspeed: 0
>> 2023-04-20 11:09:51.703708: Actual duplex: 0
>> 2023-04-20 11:09:51.703713: Successfully set port interrupt event
>> 2023-04-20 11:09:51.818085: Flow control turned off for Port 0
>> 2023-04-20 11:09:51.844179: Port 0 up and running
>> 2023-04-20 11:09:51.844303: Event type: LSC interrupt
>> 2023-04-20 11:09:51.844382: Port 0 Link Down
>>
>> And after I stop and start:
>> 2023-04-20 11:11:00.492428: Driver: net_e1000_igb
>> 2023-04-20 11:11:00.492476: Bus Id: 0000:01:00.0
>> 2023-04-20 11:11:00.492526: rx offload cap: 280e (92e0f)
>> 2023-04-20 11:11:00.492576: tx offload cap: 8002 (803f)
>> 2023-04-20 11:11:00.492624: NUMA Socket: 0
>> 2023-04-20 11:11:00.492672: MAC Address: b4:96:91:63:62:40
>> 2023-04-20 11:11:00.492721: Max Rx Queue: 8
>> 2023-04-20 11:11:00.492770: Max Tx Queue: 8
>> 2023-04-20 11:11:00.492813: Max Rx Descriptors: 4096
>> 2023-04-20 11:11:00.492851: Max Tx Descriptors: 4096
>> 2023-04-20 11:11:00.492889: Max Rx Packet Length: 16383
>> 2023-04-20 11:11:00.492958: Available Link Speeds: 10Mb/s 100Mb/s
>> 1Gb/s
>> 2023-04-20 11:11:00.493207: Fixed Link Speed: Auto
>> 2023-04-20 11:11:00.493301: Fixed Duplex: Full
>> 2023-04-20 11:11:00.493822: MTU Set to: 16383
>> 2023-04-20 11:11:00.493889: Actual Rx Descriptors: 4096
>> 2023-04-20 11:11:00.493936: Actual Tx Descriptors: 4096
>> 2023-04-20 11:11:00.494190: Actual MTU: 16383
>> 2023-04-20 11:11:00.494229: Actual Linkspeed: 0
>> 2023-04-20 11:11:00.494266: Actual duplex: 1
>> 2023-04-20 11:11:00.494305: Successfully set port interrupt event
>> *EAL: Error disabling MSI-X interrupts for fd 46*
>> 2023-04-20 11:11:00.603181: Flow control turned off for Port 0
>> 2023-04-20 11:11:00.629151: Port 0 up and running
>> 2023-04-20 11:11:00.629222: Event type: LSC interrupt
>> 2023-04-20 11:11:00.629273: Port 0 Link Down
>>
>>
>> Thanks,
>> Igor
>>
>>
>>
[-- Attachment #2: Type: text/html, Size: 5424 bytes --]
next prev parent reply other threads:[~2023-04-21 17:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-20 11:33 Igor de Paula
2023-04-21 12:39 ` Igor de Paula
2023-04-21 17:39 ` Verghis Koshi [this message]
2023-04-21 17:42 ` Igor de Paula
2023-04-21 21:06 ` Stephen Hemminger
2023-04-21 21:12 ` Igor de Paula
2023-04-22 1:16 ` Verghis Koshi
2023-04-24 8:37 ` Igor de Paula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAANwsYPVpQ4mBkE4mmPowoivXoc10W3uRQkz=u5e8zZmz_iO6Q@mail.gmail.com' \
--to=vkoshi@gmail.com \
--cc=igordptx@gmail.com \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).