DPDK usage discussions
 help / color / Atom feed
* [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use ***
@ 2019-05-27 14:44 Sara Gittlin
  2019-05-27 14:52 ` Stephen Hemminger
  0 siblings, 1 reply; 10+ messages in thread
From: Sara Gittlin @ 2019-05-27 14:44 UTC (permalink / raw)
  To: users

Hello ,
I'm running pktgen on a ubuntu-16.0p4 VM w 3 CPU's,
I added  2 SRIOV VFs  devices to the VM - and i can see them w lspci or
dpdk-devbind --status
00:08.0 Ethernet controller: Intel Corporation Ethernet Connection X552
Virtual Function
00:09.0 Ethernet controller: Intel Corporation Ethernet Connection X552
Virtual Function

When i run pktgen :
sudo  ./app/x86_64-native-linuxapp-gcc/pktgen  -l 0-2 -n 4 --proc-type auto
--socket-mem 256 -b 00:08.0 -b 00:09.0 \--file-prefix pg \-- -P -m "1.0,
2.1"
i get this error :
!PANIC!: *** Did not find any ports to use ***
PANIC in pktgen_config_ports():
*** Did not find any ports to use ***6:

i see also this msg during startup : EAL: PCI device 0000:00:08.0 on NUMA
socket -1

The      FULL log:

---------------------------Copyright (c) <2010-2019>, Intel Corporation.
All rights reserved. Powered by DPDK
EAL: Detected 3 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Auto-detected process type: PRIMARY
EAL: Multi-process socket /var/run/dpdk/pg/mp_socket
EAL: Probing VFIO support...
EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using unreliable
clock cycles !
EAL: PCI device 0000:00:08.0 on NUMA socket -1
EAL:   Device is blacklisted, not initializing
EAL: PCI device 0000:00:09.0 on NUMA socket -1
EAL:   Device is blacklisted, not initializing
Lua 5.3.1  Copyright (C) 1994-2015 Lua.org, PUC-Rio

*** Copyright (c) <2010-2019>, Intel Corporation. All rights reserved.
*** Pktgen created by: Keith Wiles -- >>> Powered by DPDK <<<

!PANIC!: *** Did not find any ports to use ***
PANIC in pktgen_config_ports():
*** Did not find any ports to use ***6:
[./app/x86_64-native-linuxapp-gcc/pktgen(_start+0x29) [0x483b49]]
5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)
[0x7fadf8d2c830]]
4: [./app/x86_64-native-linuxapp-gcc/pktgen(main+0x659) [0x47ad19]]
3: [./app/x86_64-native-linuxapp-gcc/pktgen(pktgen_config_ports+0x1560)
[0x4ae230]]
2: [./app/x86_64-native-linuxapp-gcc/pktgen(__rte_panic+0xc3) [0x469e8f]]
1: [./app/x86_64-native-linuxapp-gcc/pktgen(rte_dump_stack+0x2b) [0x59084b]]
Aborted (core dumped)
Thank you
-Sara

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use ***
  2019-05-27 14:44 [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use *** Sara Gittlin
@ 2019-05-27 14:52 ` Stephen Hemminger
  2019-05-27 14:56   ` Sara Gittlin
  0 siblings, 1 reply; 10+ messages in thread
From: Stephen Hemminger @ 2019-05-27 14:52 UTC (permalink / raw)
  To: Sara Gittlin; +Cc: users

On Mon, 27 May 2019 17:44:17 +0300
Sara Gittlin <sara.gittlin@gmail.com> wrote:

> Hello ,
> I'm running pktgen on a ubuntu-16.0p4 VM w 3 CPU's,
> I added  2 SRIOV VFs  devices to the VM - and i can see them w lspci or
> dpdk-devbind --status
> 00:08.0 Ethernet controller: Intel Corporation Ethernet Connection X552
> Virtual Function
> 00:09.0 Ethernet controller: Intel Corporation Ethernet Connection X552
> Virtual Function

Most likely these devices are missing/not supported by DPDK driver.
Look at the numeric id's (lspci -n) and compare them with the list
of pci ids in the driver source.

In the past with Intel devices it also helped to look at the Linux
kernel driver. Sometimes the missing id's were there and some small
changes to the MAC code was necessary to get them to work.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use ***
  2019-05-27 14:52 ` Stephen Hemminger
@ 2019-05-27 14:56   ` Sara Gittlin
  2019-05-28  5:33     ` Sara Gittlin
  0 siblings, 1 reply; 10+ messages in thread
From: Sara Gittlin @ 2019-05-27 14:56 UTC (permalink / raw)
  To: Stephen Hemminger; +Cc: users

Thank you Stephen
i can run pktgen on the host  with same 2 VF's
Regards
-Sara


On Mon, May 27, 2019 at 5:52 PM Stephen Hemminger <
stephen@networkplumber.org> wrote:

> On Mon, 27 May 2019 17:44:17 +0300
> Sara Gittlin <sara.gittlin@gmail.com> wrote:
>
> > Hello ,
> > I'm running pktgen on a ubuntu-16.0p4 VM w 3 CPU's,
> > I added  2 SRIOV VFs  devices to the VM - and i can see them w lspci or
> > dpdk-devbind --status
> > 00:08.0 Ethernet controller: Intel Corporation Ethernet Connection X552
> > Virtual Function
> > 00:09.0 Ethernet controller: Intel Corporation Ethernet Connection X552
> > Virtual Function
>
> Most likely these devices are missing/not supported by DPDK driver.
> Look at the numeric id's (lspci -n) and compare them with the list
> of pci ids in the driver source.
>
> In the past with Intel devices it also helped to look at the Linux
> kernel driver. Sometimes the missing id's were there and some small
> changes to the MAC code was necessary to get them to work.
>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use ***
  2019-05-27 14:56   ` Sara Gittlin
@ 2019-05-28  5:33     ` Sara Gittlin
  2019-05-28 13:59       ` Wiles, Keith
  2019-05-28 14:02       ` Stephen Hemminger
  0 siblings, 2 replies; 10+ messages in thread
From: Sara Gittlin @ 2019-05-28  5:33 UTC (permalink / raw)
  To: Stephen Hemminger; +Cc: users

Hello
According the dpdk release notes - my NIC   - Onboard NIC: *Intel(R)
X552*/X557-AT
(2x10G) was tested

Tested Platforms

----------------


#. SuperMicro 1U


   - BIOS: 1.0c

   - Processor: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz


#. SuperMicro 1U


   - BIOS: 1.0a

   - Processor: Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz

   *- Onboard NIC: Intel(R) X552/X557-AT (2x10G)*

Thank you

-Sara

On Mon, May 27, 2019 at 5:56 PM Sara Gittlin <sara.gittlin@gmail.com> wrote:

> Thank you Stephen
> i can run pktgen on the host  with same 2 VF's
> Regards
> -Sara
>
>
> On Mon, May 27, 2019 at 5:52 PM Stephen Hemminger <
> stephen@networkplumber.org> wrote:
>
>> On Mon, 27 May 2019 17:44:17 +0300
>> Sara Gittlin <sara.gittlin@gmail.com> wrote:
>>
>> > Hello ,
>> > I'm running pktgen on a ubuntu-16.0p4 VM w 3 CPU's,
>> > I added  2 SRIOV VFs  devices to the VM - and i can see them w lspci or
>> > dpdk-devbind --status
>> > 00:08.0 Ethernet controller: Intel Corporation Ethernet Connection X552
>> > Virtual Function
>> > 00:09.0 Ethernet controller: Intel Corporation Ethernet Connection X552
>> > Virtual Function
>>
>> Most likely these devices are missing/not supported by DPDK driver.
>> Look at the numeric id's (lspci -n) and compare them with the list
>> of pci ids in the driver source.
>>
>> In the past with Intel devices it also helped to look at the Linux
>> kernel driver. Sometimes the missing id's were there and some small
>> changes to the MAC code was necessary to get them to work.
>>
>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use ***
  2019-05-28  5:33     ` Sara Gittlin
@ 2019-05-28 13:59       ` Wiles, Keith
  2019-05-28 14:02       ` Stephen Hemminger
  1 sibling, 0 replies; 10+ messages in thread
From: Wiles, Keith @ 2019-05-28 13:59 UTC (permalink / raw)
  To: Sara Gittlin; +Cc: Stephen Hemminger, users



> On May 28, 2019, at 12:33 AM, Sara Gittlin <sara.gittlin@gmail.com> wrote:
> 
> Hello
> According the dpdk release notes - my NIC   - Onboard NIC: *Intel(R)
> X552*/X557-AT
> (2x10G) was tested
> 
> Tested Platforms
> 
> ----------------
> 
> 
> #. SuperMicro 1U
> 
> 
>   - BIOS: 1.0c
> 
>   - Processor: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
> 
> 
> #. SuperMicro 1U
> 
> 
>   - BIOS: 1.0a
> 
>   - Processor: Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
> 
>   *- Onboard NIC: Intel(R) X552/X557-AT (2x10G)*
> 
> Thank you
> 

As Stephen stated this normally something to do with device IDs or NICs not bound to the correct module igb_uio, vfio, …, this I believe is a configuration problem and not a Pktgen problem. The pktgen command line looks correct, but DPDK needs to see the ports before pktgen can use them.

I did not see which kernel module you have attached NICs can you show the dpdk-devbind.py -s output or if you forgot to do that bind inside the VM please bind the NICs to the kernel module you are using. Beyond this little help I do not use VMs very often to get pktgen and not much help here, but as I stated this is not a pktgen problem.

Have you tested other DPDK apps like testpmd/l3fwd/l2fwd and do they work?

> -Sara
> 
> On Mon, May 27, 2019 at 5:56 PM Sara Gittlin <sara.gittlin@gmail.com> wrote:
> 
>> Thank you Stephen
>> i can run pktgen on the host  with same 2 VF's
>> Regards
>> -Sara
>> 
>> 
>> On Mon, May 27, 2019 at 5:52 PM Stephen Hemminger <
>> stephen@networkplumber.org> wrote:
>> 
>>> On Mon, 27 May 2019 17:44:17 +0300
>>> Sara Gittlin <sara.gittlin@gmail.com> wrote:
>>> 
>>>> Hello ,
>>>> I'm running pktgen on a ubuntu-16.0p4 VM w 3 CPU's,
>>>> I added  2 SRIOV VFs  devices to the VM - and i can see them w lspci or
>>>> dpdk-devbind --status
>>>> 00:08.0 Ethernet controller: Intel Corporation Ethernet Connection X552
>>>> Virtual Function
>>>> 00:09.0 Ethernet controller: Intel Corporation Ethernet Connection X552
>>>> Virtual Function
>>> 
>>> Most likely these devices are missing/not supported by DPDK driver.
>>> Look at the numeric id's (lspci -n) and compare them with the list
>>> of pci ids in the driver source.
>>> 
>>> In the past with Intel devices it also helped to look at the Linux
>>> kernel driver. Sometimes the missing id's were there and some small
>>> changes to the MAC code was necessary to get them to work.
>>> 
>> 

Regards,
Keith


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use ***
  2019-05-28  5:33     ` Sara Gittlin
  2019-05-28 13:59       ` Wiles, Keith
@ 2019-05-28 14:02       ` Stephen Hemminger
  2019-05-28 18:09         ` Sara Gittlin
  1 sibling, 1 reply; 10+ messages in thread
From: Stephen Hemminger @ 2019-05-28 14:02 UTC (permalink / raw)
  To: Sara Gittlin; +Cc: users

On Tue, 28 May 2019 08:33:35 +0300
Sara Gittlin <sara.gittlin@gmail.com> wrote:

> Hello
> According the dpdk release notes - my NIC   - Onboard NIC: *Intel(R)
> X552*/X557-AT
> (2x10G) was tested
> 
> Tested Platforms
> 
> ----------------
> 
> 
> #. SuperMicro 1U
> 
> 
>    - BIOS: 1.0c
> 
>    - Processor: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
> 
> 
> #. SuperMicro 1U
> 
> 
>    - BIOS: 1.0a
> 
>    - Processor: Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
> 
>    *- Onboard NIC: Intel(R) X552/X557-AT (2x10G)*
> 
> Thank you
> 
> -Sara
> 
> On Mon, May 27, 2019 at 5:56 PM Sara Gittlin <sara.gittlin@gmail.com> wrote:
> 
> > Thank you Stephen
> > i can run pktgen on the host  with same 2 VF's
> > Regards
> > -Sara
> >
> >
> > On Mon, May 27, 2019 at 5:52 PM Stephen Hemminger <  
> > stephen@networkplumber.org> wrote:  
> >  
> >> On Mon, 27 May 2019 17:44:17 +0300
> >> Sara Gittlin <sara.gittlin@gmail.com> wrote:
> >>  
> >> > Hello ,
> >> > I'm running pktgen on a ubuntu-16.0p4 VM w 3 CPU's,
> >> > I added  2 SRIOV VFs  devices to the VM - and i can see them w lspci or
> >> > dpdk-devbind --status
> >> > 00:08.0 Ethernet controller: Intel Corporation Ethernet Connection X552
> >> > Virtual Function
> >> > 00:09.0 Ethernet controller: Intel Corporation Ethernet Connection X552
> >> > Virtual Function  
> >>
> >> Most likely these devices are missing/not supported by DPDK driver.
> >> Look at the numeric id's (lspci -n) and compare them with the list
> >> of pci ids in the driver source.
> >>
> >> In the past with Intel devices it also helped to look at the Linux
> >> kernel driver. Sometimes the missing id's were there and some small
> >> changes to the MAC code was necessary to get them to work.

Walking backwards from PCI to device.

1. The PCI id table for lspci is in /usr/share/misc/pci.ids
   The entry for X552 is:
	15a9  X552 Virtual Function
   Therefore the PCI vendor:device is 8086:15a9

4. On Linux this device is under ixgbevf as

#define IXGBE_DEV_ID_X550EM_X_VF_HV        0x15A9

static const struct pci_device_id ixgbevf_pci_tbl[] = {
	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF), board_82599_vf },
	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF_HV), board_82599_vf_hv },
	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF), board_X540_vf },
	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF_HV), board_X540_vf_hv },
	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550_VF), board_X550_vf },
	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550_VF_HV), board_X550_vf_hv },
	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_VF), board_X550EM_x_vf }
	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_VF), board_x550em_a_vf },
	/* required last entry */
	{0, }
};

   Conclusion: you are using X552 on Hyper-V.

5. In DPDK, similar table is ixgbe_ethdev.

/*
 * The set of PCI devices this driver supports (for 82599 VF)
 */
static const struct rte_pci_id pci_id_ixgbevf_map[] = {
	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_VF) },
	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_VF_HV) },
	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540_VF) },
	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540_VF_HV) },
	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550_VF_HV) },
	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550_VF) },
	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_VF) },
	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_VF_HV) },
	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_VF) },
	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_VF_HV) },
	{ .vendor_id = 0, /* sentinel */ },
};

So the device is supported...


A different possibility is that since you are running on Hyper-V (at least
according to the device ids) is that vdev_netvsc device is trying to setup tap
failsafe and messing the port numbers around.
Try disabling it by setting this in the config.

CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n




PS: Top posting is not preferred on open source mailing lists.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use ***
  2019-05-28 14:02       ` Stephen Hemminger
@ 2019-05-28 18:09         ` Sara Gittlin
  2019-05-29  8:40           ` [dpdk-users] pktgen Did not find any ports to use Sara Gittlin
  2019-05-29 10:30           ` [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use *** Sara Gittlin
  0 siblings, 2 replies; 10+ messages in thread
From: Sara Gittlin @ 2019-05-28 18:09 UTC (permalink / raw)
  To: Stephen Hemminger; +Cc: users

Thank you Stephen and Keith
trying your suggestions ..
Stephen - regarding your PS - I'm really sorry - I did not mean to
prioritise  myself - just pasted the error msg. I'll remember your
recommendation ..
Regards
-Sara


On Tue, May 28, 2019 at 5:02 PM Stephen Hemminger <
stephen@networkplumber.org> wrote:

> On Tue, 28 May 2019 08:33:35 +0300
> Sara Gittlin <sara.gittlin@gmail.com> wrote:
>
> > Hello
> > According the dpdk release notes - my NIC   - Onboard NIC: *Intel(R)
> > X552*/X557-AT
> > (2x10G) was tested
> >
> > Tested Platforms
> >
> > ----------------
> >
> >
> > #. SuperMicro 1U
> >
> >
> >    - BIOS: 1.0c
> >
> >    - Processor: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
> >
> >
> > #. SuperMicro 1U
> >
> >
> >    - BIOS: 1.0a
> >
> >    - Processor: Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
> >
> >    *- Onboard NIC: Intel(R) X552/X557-AT (2x10G)*
> >
> > Thank you
> >
> > -Sara
> >
> > On Mon, May 27, 2019 at 5:56 PM Sara Gittlin <sara.gittlin@gmail.com>
> wrote:
> >
> > > Thank you Stephen
> > > i can run pktgen on the host  with same 2 VF's
> > > Regards
> > > -Sara
> > >
> > >
> > > On Mon, May 27, 2019 at 5:52 PM Stephen Hemminger <
> > > stephen@networkplumber.org> wrote:
> > >
> > >> On Mon, 27 May 2019 17:44:17 +0300
> > >> Sara Gittlin <sara.gittlin@gmail.com> wrote:
> > >>
> > >> > Hello ,
> > >> > I'm running pktgen on a ubuntu-16.0p4 VM w 3 CPU's,
> > >> > I added  2 SRIOV VFs  devices to the VM - and i can see them w
> lspci or
> > >> > dpdk-devbind --status
> > >> > 00:08.0 Ethernet controller: Intel Corporation Ethernet Connection
> X552
> > >> > Virtual Function
> > >> > 00:09.0 Ethernet controller: Intel Corporation Ethernet Connection
> X552
> > >> > Virtual Function
> > >>
> > >> Most likely these devices are missing/not supported by DPDK driver.
> > >> Look at the numeric id's (lspci -n) and compare them with the list
> > >> of pci ids in the driver source.
> > >>
> > >> In the past with Intel devices it also helped to look at the Linux
> > >> kernel driver. Sometimes the missing id's were there and some small
> > >> changes to the MAC code was necessary to get them to work.
>
> Walking backwards from PCI to device.
>
> 1. The PCI id table for lspci is in /usr/share/misc/pci.ids
>    The entry for X552 is:
>         15a9  X552 Virtual Function
>    Therefore the PCI vendor:device is 8086:15a9
>
> 4. On Linux this device is under ixgbevf as
>
> #define IXGBE_DEV_ID_X550EM_X_VF_HV        0x15A9
>
> static const struct pci_device_id ixgbevf_pci_tbl[] = {
>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF), board_82599_vf },
>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF_HV), board_82599_vf_hv },
>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF), board_X540_vf },
>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF_HV), board_X540_vf_hv },
>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550_VF), board_X550_vf },
>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550_VF_HV), board_X550_vf_hv },
>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_VF), board_X550EM_x_vf }
>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_VF), board_x550em_a_vf },
>         /* required last entry */
>         {0, }
> };
>
>    Conclusion: you are using X552 on Hyper-V.
>
> 5. In DPDK, similar table is ixgbe_ethdev.
>
> /*
>  * The set of PCI devices this driver supports (for 82599 VF)
>  */
> static const struct rte_pci_id pci_id_ixgbevf_map[] = {
>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_VF) },
>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_VF_HV)
> },
>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540_VF) },
>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540_VF_HV) },
>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550_VF_HV) },
>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550_VF) },
>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_VF)
> },
>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID,
> IXGBE_DEV_ID_X550EM_A_VF_HV) },
>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_VF)
> },
>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID,
> IXGBE_DEV_ID_X550EM_X_VF_HV) },
>         { .vendor_id = 0, /* sentinel */ },
> };
>
> So the device is supported...
>
>
> A different possibility is that since you are running on Hyper-V (at least
> according to the device ids) is that vdev_netvsc device is trying to setup
> tap
> failsafe and messing the port numbers around.
> Try disabling it by setting this in the config.
>
> CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
>
>
>
>
> PS: Top posting is not preferred on open source mailing lists.
>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-users] pktgen Did not find any ports to use
  2019-05-28 18:09         ` Sara Gittlin
@ 2019-05-29  8:40           ` Sara Gittlin
  2019-05-29 10:30           ` [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use *** Sara Gittlin
  1 sibling, 0 replies; 10+ messages in thread
From: Sara Gittlin @ 2019-05-29  8:40 UTC (permalink / raw)
  To: Stephen Hemminger; +Cc: users

Thank you Keith and Stephen,
the output of dpdk-devbind --status is :
./dpdk-devbind.py -s

Network devices using kernel driver
===================================
0000:00:03.0 'RTL-8100/8101L/8139 PCI Fast Ethernet Adapter 8139' if=ens3
drv=8139cp unused=8139too *Active*
0000:00:08.0 'Ethernet Connection X552 Virtual Function 15a8' if=ens8
drv=ixgbevf unused=
0000:00:09.0 'Ethernet Connection X552 Virtual Function 15a8' if=ens9
drv=ixgbevf unused=

Stephen - setting CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD to n doesnt help.
I'll try to run pktgen on the host
Regards
-Sara


On Tue, May 28, 2019 at 9:09 PM Sara Gittlin <sara.gittlin@gmail.com> wrote:

> Thank you Stephen and Keith
> trying your suggestions ..
> Stephen - regarding your PS - I'm really sorry - I did not mean to
> prioritise  myself - just pasted the error msg. I'll remember your
> recommendation ..
> Regards
> -Sara
>
>
> On Tue, May 28, 2019 at 5:02 PM Stephen Hemminger <
> stephen@networkplumber.org> wrote:
>
>> On Tue, 28 May 2019 08:33:35 +0300
>> Sara Gittlin <sara.gittlin@gmail.com> wrote:
>>
>> > Hello
>> > According the dpdk release notes - my NIC   - Onboard NIC: *Intel(R)
>> > X552*/X557-AT
>> > (2x10G) was tested
>> >
>> > Tested Platforms
>> >
>> > ----------------
>> >
>> >
>> > #. SuperMicro 1U
>> >
>> >
>> >    - BIOS: 1.0c
>> >
>> >    - Processor: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
>> >
>> >
>> > #. SuperMicro 1U
>> >
>> >
>> >    - BIOS: 1.0a
>> >
>> >    - Processor: Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
>> >
>> >    *- Onboard NIC: Intel(R) X552/X557-AT (2x10G)*
>> >
>> > Thank you
>> >
>> > -Sara
>> >
>> > On Mon, May 27, 2019 at 5:56 PM Sara Gittlin <sara.gittlin@gmail.com>
>> wrote:
>> >
>> > > Thank you Stephen
>> > > i can run pktgen on the host  with same 2 VF's
>> > > Regards
>> > > -Sara
>> > >
>> > >
>> > > On Mon, May 27, 2019 at 5:52 PM Stephen Hemminger <
>> > > stephen@networkplumber.org> wrote:
>> > >
>> > >> On Mon, 27 May 2019 17:44:17 +0300
>> > >> Sara Gittlin <sara.gittlin@gmail.com> wrote:
>> > >>
>> > >> > Hello ,
>> > >> > I'm running pktgen on a ubuntu-16.0p4 VM w 3 CPU's,
>> > >> > I added  2 SRIOV VFs  devices to the VM - and i can see them w
>> lspci or
>> > >> > dpdk-devbind --status
>> > >> > 00:08.0 Ethernet controller: Intel Corporation Ethernet Connection
>> X552
>> > >> > Virtual Function
>> > >> > 00:09.0 Ethernet controller: Intel Corporation Ethernet Connection
>> X552
>> > >> > Virtual Function
>> > >>
>> > >> Most likely these devices are missing/not supported by DPDK driver.
>> > >> Look at the numeric id's (lspci -n) and compare them with the list
>> > >> of pci ids in the driver source.
>> > >>
>> > >> In the past with Intel devices it also helped to look at the Linux
>> > >> kernel driver. Sometimes the missing id's were there and some small
>> > >> changes to the MAC code was necessary to get them to work.
>>
>> Walking backwards from PCI to device.
>>
>> 1. The PCI id table for lspci is in /usr/share/misc/pci.ids
>>    The entry for X552 is:
>>         15a9  X552 Virtual Function
>>    Therefore the PCI vendor:device is 8086:15a9
>>
>> 4. On Linux this device is under ixgbevf as
>>
>> #define IXGBE_DEV_ID_X550EM_X_VF_HV        0x15A9
>>
>> static const struct pci_device_id ixgbevf_pci_tbl[] = {
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF), board_82599_vf },
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF_HV), board_82599_vf_hv
>> },
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF), board_X540_vf },
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF_HV), board_X540_vf_hv },
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550_VF), board_X550_vf },
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550_VF_HV), board_X550_vf_hv },
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_VF), board_X550EM_x_vf }
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_VF), board_x550em_a_vf
>> },
>>         /* required last entry */
>>         {0, }
>> };
>>
>>    Conclusion: you are using X552 on Hyper-V.
>>
>> 5. In DPDK, similar table is ixgbe_ethdev.
>>
>> /*
>>  * The set of PCI devices this driver supports (for 82599 VF)
>>  */
>> static const struct rte_pci_id pci_id_ixgbevf_map[] = {
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_VF) },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_VF_HV)
>> },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540_VF) },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540_VF_HV)
>> },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550_VF_HV)
>> },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550_VF) },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_VF)
>> },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID,
>> IXGBE_DEV_ID_X550EM_A_VF_HV) },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_VF)
>> },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID,
>> IXGBE_DEV_ID_X550EM_X_VF_HV) },
>>         { .vendor_id = 0, /* sentinel */ },
>> };
>>
>> So the device is supported...
>>
>>
>> A different possibility is that since you are running on Hyper-V (at least
>> according to the device ids) is that vdev_netvsc device is trying to
>> setup tap
>> failsafe and messing the port numbers around.
>> Try disabling it by setting this in the config.
>>
>> CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
>>
>>
>>
>>
>> PS: Top posting is not preferred on open source mailing lists.
>>
>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use ***
  2019-05-28 18:09         ` Sara Gittlin
  2019-05-29  8:40           ` [dpdk-users] pktgen Did not find any ports to use Sara Gittlin
@ 2019-05-29 10:30           ` Sara Gittlin
  2019-05-29 12:39             ` [dpdk-users] pktgen -**SOLVED** " Sara Gittlin
  1 sibling, 1 reply; 10+ messages in thread
From: Sara Gittlin @ 2019-05-29 10:30 UTC (permalink / raw)
  To: Stephen Hemminger; +Cc: users

Hi
I've tried to run on a host - but got the same error
my pci-devices are :
../dpdk/usertools/dpdk-devbind.py -s

Network devices using kernel driver
===================================
0000:03:00.0 'Ethernet Connection X552/X557-AT 10GBASE-T 15ad' if=eno3
drv=ixgbe unused=vfio-pci
0000:03:00.1 'Ethernet Connection X552/X557-AT 10GBASE-T 15ad' if=eno4
drv=ixgbe unused=vfio-pci

*******************
running pktgen
*******************
sudo ./app/x86_64-native-linuxapp-gcc/pktgen  -l 0-1 -n 4 --proc-type auto
--socket-mem 256  -w 0000:03:00.0 -w 0000:03:00.1 \--file-prefix pg \-- -P
-m "1.0, 2.1"

Copyright (c) <2010-2019>, Intel Corporation. All rights reserved. Powered
by DPDK
EAL: Detected 12 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Auto-detected process type: PRIMARY
EAL: Multi-process socket /var/run/dpdk/pg/mp_socket
EAL: No available hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL:   probe driver: 8086:15ad net_ixgbe
EAL: PCI device 0000:03:00.1 on NUMA socket 0
EAL:   probe driver: 8086:15ad net_ixgbe
Lua 5.3.1  Copyright (C) 1994-2015 Lua.org, PUC-Rio

*** Copyright (c) <2010-2019>, Intel Corporation. All rights reserved.
*** Pktgen created by: Keith Wiles -- >>> Powered by DPDK <<<

!PANIC!: *** Did not find any ports to use ***
PANIC in pktgen_config_ports():
*** Did not find any ports to use ***6:
[./app/x86_64-native-linuxapp-gcc/pktgen(_start+0x29) [0x483969]]
5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)
[0x7fb1a10a9830]]
4: [./app/x86_64-native-linuxapp-gcc/pktgen(main+0x659) [0x47aba9]]
3: [./app/x86_64-native-linuxapp-gcc/pktgen(pktgen_config_ports+0x1560)
[0x4ae050]]
2: [./app/x86_64-native-linuxapp-gcc/pktgen(__rte_panic+0xc3) [0x469d1f]]
1: [./app/x86_64-native-linuxapp-gcc/pktgen(rte_dump_stack+0x2b) [0x59066b]]
Aborted (core dumped)



On Tue, May 28, 2019 at 9:09 PM Sara Gittlin <sara.gittlin@gmail.com> wrote:

> Thank you Stephen and Keith
> trying your suggestions ..
> Stephen - regarding your PS - I'm really sorry - I did not mean to
> prioritise  myself - just pasted the error msg. I'll remember your
> recommendation ..
> Regards
> -Sara
>
>
> On Tue, May 28, 2019 at 5:02 PM Stephen Hemminger <
> stephen@networkplumber.org> wrote:
>
>> On Tue, 28 May 2019 08:33:35 +0300
>> Sara Gittlin <sara.gittlin@gmail.com> wrote:
>>
>> > Hello
>> > According the dpdk release notes - my NIC   - Onboard NIC: *Intel(R)
>> > X552*/X557-AT
>> > (2x10G) was tested
>> >
>> > Tested Platforms
>> >
>> > ----------------
>> >
>> >
>> > #. SuperMicro 1U
>> >
>> >
>> >    - BIOS: 1.0c
>> >
>> >    - Processor: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
>> >
>> >
>> > #. SuperMicro 1U
>> >
>> >
>> >    - BIOS: 1.0a
>> >
>> >    - Processor: Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
>> >
>> >    *- Onboard NIC: Intel(R) X552/X557-AT (2x10G)*
>> >
>> > Thank you
>> >
>> > -Sara
>> >
>> > On Mon, May 27, 2019 at 5:56 PM Sara Gittlin <sara.gittlin@gmail.com>
>> wrote:
>> >
>> > > Thank you Stephen
>> > > i can run pktgen on the host  with same 2 VF's
>> > > Regards
>> > > -Sara
>> > >
>> > >
>> > > On Mon, May 27, 2019 at 5:52 PM Stephen Hemminger <
>> > > stephen@networkplumber.org> wrote:
>> > >
>> > >> On Mon, 27 May 2019 17:44:17 +0300
>> > >> Sara Gittlin <sara.gittlin@gmail.com> wrote:
>> > >>
>> > >> > Hello ,
>> > >> > I'm running pktgen on a ubuntu-16.0p4 VM w 3 CPU's,
>> > >> > I added  2 SRIOV VFs  devices to the VM - and i can see them w
>> lspci or
>> > >> > dpdk-devbind --status
>> > >> > 00:08.0 Ethernet controller: Intel Corporation Ethernet Connection
>> X552
>> > >> > Virtual Function
>> > >> > 00:09.0 Ethernet controller: Intel Corporation Ethernet Connection
>> X552
>> > >> > Virtual Function
>> > >>
>> > >> Most likely these devices are missing/not supported by DPDK driver.
>> > >> Look at the numeric id's (lspci -n) and compare them with the list
>> > >> of pci ids in the driver source.
>> > >>
>> > >> In the past with Intel devices it also helped to look at the Linux
>> > >> kernel driver. Sometimes the missing id's were there and some small
>> > >> changes to the MAC code was necessary to get them to work.
>>
>> Walking backwards from PCI to device.
>>
>> 1. The PCI id table for lspci is in /usr/share/misc/pci.ids
>>    The entry for X552 is:
>>         15a9  X552 Virtual Function
>>    Therefore the PCI vendor:device is 8086:15a9
>>
>> 4. On Linux this device is under ixgbevf as
>>
>> #define IXGBE_DEV_ID_X550EM_X_VF_HV        0x15A9
>>
>> static const struct pci_device_id ixgbevf_pci_tbl[] = {
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF), board_82599_vf },
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF_HV), board_82599_vf_hv
>> },
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF), board_X540_vf },
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF_HV), board_X540_vf_hv },
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550_VF), board_X550_vf },
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550_VF_HV), board_X550_vf_hv },
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_VF), board_X550EM_x_vf }
>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_VF), board_x550em_a_vf
>> },
>>         /* required last entry */
>>         {0, }
>> };
>>
>>    Conclusion: you are using X552 on Hyper-V.
>>
>> 5. In DPDK, similar table is ixgbe_ethdev.
>>
>> /*
>>  * The set of PCI devices this driver supports (for 82599 VF)
>>  */
>> static const struct rte_pci_id pci_id_ixgbevf_map[] = {
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_VF) },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_VF_HV)
>> },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540_VF) },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540_VF_HV)
>> },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550_VF_HV)
>> },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550_VF) },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_VF)
>> },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID,
>> IXGBE_DEV_ID_X550EM_A_VF_HV) },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_VF)
>> },
>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID,
>> IXGBE_DEV_ID_X550EM_X_VF_HV) },
>>         { .vendor_id = 0, /* sentinel */ },
>> };
>>
>> So the device is supported...
>>
>>
>> A different possibility is that since you are running on Hyper-V (at least
>> according to the device ids) is that vdev_netvsc device is trying to
>> setup tap
>> failsafe and messing the port numbers around.
>> Try disabling it by setting this in the config.
>>
>> CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
>>
>>
>>
>>
>> PS: Top posting is not preferred on open source mailing lists.
>>
>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [dpdk-users] pktgen -**SOLVED** Did not find any ports to use ***
  2019-05-29 10:30           ` [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use *** Sara Gittlin
@ 2019-05-29 12:39             ` " Sara Gittlin
  0 siblings, 0 replies; 10+ messages in thread
From: Sara Gittlin @ 2019-05-29 12:39 UTC (permalink / raw)
  To: Stephen Hemminger; +Cc: users

Hi
i didnt know that i have to manually bind the pci-devices to uio drivers
before running pktgen. after i did it - everything is fine and working
Regards
-Sara
On Wed, May 29, 2019 at 1:30 PM Sara Gittlin <sara.gittlin@gmail.com> wrote:

> Hi
> I've tried to run on a host - but got the same error
> my pci-devices are :
> ../dpdk/usertools/dpdk-devbind.py -s
>
> Network devices using kernel driver
> ===================================
> 0000:03:00.0 'Ethernet Connection X552/X557-AT 10GBASE-T 15ad' if=eno3
> drv=ixgbe unused=vfio-pci
> 0000:03:00.1 'Ethernet Connection X552/X557-AT 10GBASE-T 15ad' if=eno4
> drv=ixgbe unused=vfio-pci
>
> *******************
> running pktgen
> *******************
> sudo ./app/x86_64-native-linuxapp-gcc/pktgen  -l 0-1 -n 4 --proc-type auto
> --socket-mem 256  -w 0000:03:00.0 -w 0000:03:00.1 \--file-prefix pg \-- -P
> -m "1.0, 2.1"
>
> Copyright (c) <2010-2019>, Intel Corporation. All rights reserved. Powered
> by DPDK
> EAL: Detected 12 lcore(s)
> EAL: Detected 1 NUMA nodes
> EAL: Auto-detected process type: PRIMARY
> EAL: Multi-process socket /var/run/dpdk/pg/mp_socket
> EAL: No available hugepages reported in hugepages-1048576kB
> EAL: Probing VFIO support...
> EAL: VFIO support initialized
> EAL: PCI device 0000:03:00.0 on NUMA socket 0
> EAL:   probe driver: 8086:15ad net_ixgbe
> EAL: PCI device 0000:03:00.1 on NUMA socket 0
> EAL:   probe driver: 8086:15ad net_ixgbe
> Lua 5.3.1  Copyright (C) 1994-2015 Lua.org, PUC-Rio
>
> *** Copyright (c) <2010-2019>, Intel Corporation. All rights reserved.
> *** Pktgen created by: Keith Wiles -- >>> Powered by DPDK <<<
>
> !PANIC!: *** Did not find any ports to use ***
> PANIC in pktgen_config_ports():
> *** Did not find any ports to use ***6:
> [./app/x86_64-native-linuxapp-gcc/pktgen(_start+0x29) [0x483969]]
> 5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)
> [0x7fb1a10a9830]]
> 4: [./app/x86_64-native-linuxapp-gcc/pktgen(main+0x659) [0x47aba9]]
> 3: [./app/x86_64-native-linuxapp-gcc/pktgen(pktgen_config_ports+0x1560)
> [0x4ae050]]
> 2: [./app/x86_64-native-linuxapp-gcc/pktgen(__rte_panic+0xc3) [0x469d1f]]
> 1: [./app/x86_64-native-linuxapp-gcc/pktgen(rte_dump_stack+0x2b)
> [0x59066b]]
> Aborted (core dumped)
>
>
>
> On Tue, May 28, 2019 at 9:09 PM Sara Gittlin <sara.gittlin@gmail.com>
> wrote:
>
>> Thank you Stephen and Keith
>> trying your suggestions ..
>> Stephen - regarding your PS - I'm really sorry - I did not mean to
>> prioritise  myself - just pasted the error msg. I'll remember your
>> recommendation ..
>> Regards
>> -Sara
>>
>>
>> On Tue, May 28, 2019 at 5:02 PM Stephen Hemminger <
>> stephen@networkplumber.org> wrote:
>>
>>> On Tue, 28 May 2019 08:33:35 +0300
>>> Sara Gittlin <sara.gittlin@gmail.com> wrote:
>>>
>>> > Hello
>>> > According the dpdk release notes - my NIC   - Onboard NIC: *Intel(R)
>>> > X552*/X557-AT
>>> > (2x10G) was tested
>>> >
>>> > Tested Platforms
>>> >
>>> > ----------------
>>> >
>>> >
>>> > #. SuperMicro 1U
>>> >
>>> >
>>> >    - BIOS: 1.0c
>>> >
>>> >    - Processor: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
>>> >
>>> >
>>> > #. SuperMicro 1U
>>> >
>>> >
>>> >    - BIOS: 1.0a
>>> >
>>> >    - Processor: Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
>>> >
>>> >    *- Onboard NIC: Intel(R) X552/X557-AT (2x10G)*
>>> >
>>> > Thank you
>>> >
>>> > -Sara
>>> >
>>> > On Mon, May 27, 2019 at 5:56 PM Sara Gittlin <sara.gittlin@gmail.com>
>>> wrote:
>>> >
>>> > > Thank you Stephen
>>> > > i can run pktgen on the host  with same 2 VF's
>>> > > Regards
>>> > > -Sara
>>> > >
>>> > >
>>> > > On Mon, May 27, 2019 at 5:52 PM Stephen Hemminger <
>>> > > stephen@networkplumber.org> wrote:
>>> > >
>>> > >> On Mon, 27 May 2019 17:44:17 +0300
>>> > >> Sara Gittlin <sara.gittlin@gmail.com> wrote:
>>> > >>
>>> > >> > Hello ,
>>> > >> > I'm running pktgen on a ubuntu-16.0p4 VM w 3 CPU's,
>>> > >> > I added  2 SRIOV VFs  devices to the VM - and i can see them w
>>> lspci or
>>> > >> > dpdk-devbind --status
>>> > >> > 00:08.0 Ethernet controller: Intel Corporation Ethernet
>>> Connection X552
>>> > >> > Virtual Function
>>> > >> > 00:09.0 Ethernet controller: Intel Corporation Ethernet
>>> Connection X552
>>> > >> > Virtual Function
>>> > >>
>>> > >> Most likely these devices are missing/not supported by DPDK driver.
>>> > >> Look at the numeric id's (lspci -n) and compare them with the list
>>> > >> of pci ids in the driver source.
>>> > >>
>>> > >> In the past with Intel devices it also helped to look at the Linux
>>> > >> kernel driver. Sometimes the missing id's were there and some small
>>> > >> changes to the MAC code was necessary to get them to work.
>>>
>>> Walking backwards from PCI to device.
>>>
>>> 1. The PCI id table for lspci is in /usr/share/misc/pci.ids
>>>    The entry for X552 is:
>>>         15a9  X552 Virtual Function
>>>    Therefore the PCI vendor:device is 8086:15a9
>>>
>>> 4. On Linux this device is under ixgbevf as
>>>
>>> #define IXGBE_DEV_ID_X550EM_X_VF_HV        0x15A9
>>>
>>> static const struct pci_device_id ixgbevf_pci_tbl[] = {
>>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF), board_82599_vf },
>>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF_HV), board_82599_vf_hv
>>> },
>>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF), board_X540_vf },
>>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF_HV), board_X540_vf_hv },
>>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550_VF), board_X550_vf },
>>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550_VF_HV), board_X550_vf_hv },
>>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_VF), board_X550EM_x_vf
>>> }
>>>         {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_VF), board_x550em_a_vf
>>> },
>>>         /* required last entry */
>>>         {0, }
>>> };
>>>
>>>    Conclusion: you are using X552 on Hyper-V.
>>>
>>> 5. In DPDK, similar table is ixgbe_ethdev.
>>>
>>> /*
>>>  * The set of PCI devices this driver supports (for 82599 VF)
>>>  */
>>> static const struct rte_pci_id pci_id_ixgbevf_map[] = {
>>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_VF) },
>>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID,
>>> IXGBE_DEV_ID_82599_VF_HV) },
>>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540_VF) },
>>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540_VF_HV)
>>> },
>>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550_VF_HV)
>>> },
>>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550_VF) },
>>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID,
>>> IXGBE_DEV_ID_X550EM_A_VF) },
>>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID,
>>> IXGBE_DEV_ID_X550EM_A_VF_HV) },
>>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID,
>>> IXGBE_DEV_ID_X550EM_X_VF) },
>>>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID,
>>> IXGBE_DEV_ID_X550EM_X_VF_HV) },
>>>         { .vendor_id = 0, /* sentinel */ },
>>> };
>>>
>>> So the device is supported...
>>>
>>>
>>> A different possibility is that since you are running on Hyper-V (at
>>> least
>>> according to the device ids) is that vdev_netvsc device is trying to
>>> setup tap
>>> failsafe and messing the port numbers around.
>>> Try disabling it by setting this in the config.
>>>
>>> CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
>>>
>>>
>>>
>>>
>>> PS: Top posting is not preferred on open source mailing lists.
>>>
>>

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-27 14:44 [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use *** Sara Gittlin
2019-05-27 14:52 ` Stephen Hemminger
2019-05-27 14:56   ` Sara Gittlin
2019-05-28  5:33     ` Sara Gittlin
2019-05-28 13:59       ` Wiles, Keith
2019-05-28 14:02       ` Stephen Hemminger
2019-05-28 18:09         ` Sara Gittlin
2019-05-29  8:40           ` [dpdk-users] pktgen Did not find any ports to use Sara Gittlin
2019-05-29 10:30           ` [dpdk-users] pktgen - !PANIC!: *** Did not find any ports to use *** Sara Gittlin
2019-05-29 12:39             ` [dpdk-users] pktgen -**SOLVED** " Sara Gittlin

DPDK usage discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/users/0 users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 users users/ http://inbox.dpdk.org/users \
		users@dpdk.org
	public-inbox-index users


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.users


AGPL code for this site: git clone https://public-inbox.org/ public-inbox