DPDK usage discussions
 help / color / Atom feed
* [dpdk-users] running parallel 2 different flows with different rate
@ 2019-08-21  8:45 Sara Gittlin
  0 siblings, 0 replies; only message in thread
From: Sara Gittlin @ 2019-08-21  8:45 UTC (permalink / raw)
  To: users

Hi
Can i run 2 different range groups in parallel with a different rate ?
for example :
- range 1 -   1.1.1.1 (start) - 1.255.255.255(stop)  is transmitting to
2.1.1.1   with rate of 10% percent

- range 2.    3.3.3.3 ( start)  - 3.255.255.255(stop)   is transmitting to
4.1.1.1  with rate of 1 percent ?

Thank you
-Sara

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-21  8:45 [dpdk-users] running parallel 2 different flows with different rate Sara Gittlin

DPDK usage discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/users/0 users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 users users/ http://inbox.dpdk.org/users \
		users@dpdk.org
	public-inbox-index users


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.users


AGPL code for this site: git clone https://public-inbox.org/ public-inbox