Hi Stephen/Long,
Thanks for the suggestions. I configured the RSS key to be 40 bytes as suggested.
What NDIS version is being used by netvsc and could you please direct me to a microsoft document confirming that if TCP RSS is requested, UDP RSS is implied?
Regards

On Wed, Sep 4, 2024 at 3:42 PM Stephen Hemminger <stephen@networkplumber.org> wrote:
On Tue, 3 Sep 2024 17:21:48 -0700
Nandini Rangaswamy <nandini.rangaswamy@broadcom.com> wrote:

> Hi Stephen/Long,
> dpdk_netvsc_port_configure:1873 Configure port eth2/2. I am testing using
> TCP traffic (iperf3 tool) generated between pair of client and servers with
> DPDK app forward traffic between client and servers.
> These are the config being passed for configuring netvsc:
> lsc_intr=1
> rxq/txq=2/2,
> rss is enabled with rss_hf=0x0000000000000c30
> tx_ol=0x00000000000006
> rx_ol=0x00000000080007
>
> Rsskey len is 64.
> struct rte_eth_conf conf = {
> .intr_conf = {
> .lsc = !dpdk.lsc_intr_disable && !dpdk_if->lsc_intr_disable &&
> !!(dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC),
> },
> .rxmode = {
> .mq_mode = RTE_ETH_MQ_RX_RSS,
> .offloads = RTE_ETH_RX_OFFLOAD_VLAN_STRIP | RTE_ETH_RX_OFFLOAD_IPV4_CKSUM |
> RTE_ETH_RX_OFFLOAD_RSS_HASH | RTE_ETH_RX_OFFLOAD_UDP_CKSUM,
> },
> .rx_adv_conf.rss_conf = {
> .rss_hf = RTE_ETH_RSS_NONFRAG_IPV4_UDP | RTE_ETH_RSS_NONFRAG_IPV4_TCP |
> RTE_ETH_RSS_NONFRAG_IPV6_TCP,
> .rss_key = conf_rss_key,
> .rss_key_len = rss_key_len,
> },
> .txmode = {
> .offloads = RTE_ETH_TX_OFFLOAD_UDP_CKSUM | RTE_ETH_TX_OFFLOAD_IPV4_CKSUM,
> },
>
> Regards,
> Nandini
>
> On Tue, Sep 3, 2024 at 5:03 PM Stephen Hemminger <stephen@networkplumber.org>
> wrote:
>
> > On Tue, 3 Sep 2024 14:43:28 -0700
> > Nandini Rangaswamy <nandini.rangaswamy@broadcom.com> wrote:
> > 
> > > Hi Stephen and Long,
> > > I was going through one of the netvsc patches
> > > https://mails.dpdk.org/archives/dev/2018-August/110559.html which 
> > mentioned 
> > > that netvsc and failsafe give the same performance in VF path whereas for
> > > some exception path  tests, about 22% performance gain in seen.
> > > I ran some tests locally with my dpdk app integrated with netvsc PMD and
> > > observed that netvsc does give nearly the same performance as failsafe in
> > > the VF path.
> > > Since the official document does not explicitly cite this, I would like 
> > to 
> > > confirm if this holds good.
> > > Regards,
> > > Nandini
> > > 
> >
> > Shouldn't be. What settings are you using.
> > Both failsafe and netvsc just pass packets to VF if present.
> > There is even more locks to go through with failsafe.
> >
> > Are you sure the test doesn't exercise something like checksumming which
> > maybe different.
> > 
>

How many streams? RSS won't matter unless multiple streams.
The netvsc driver does not have RSS for UDP as a listed flag.
It turns out that for that version of NDIS, if you ask for TCP RSS, UDP RSS is implied.

RSS Key must be 40 bytes (Toeplitz) not 64 bytes.
Just use the default key (rss_key == NULL rss_key_len = 0) to be safe

Check that packets are going to the VF. One way to do that is to look at xstats on both netvsc and mlx5 device.



This electronic communication and the information and any files transmitted with it, or attached to it, are confidential and are intended solely for the use of the individual or entity to whom it is addressed and may contain information that is confidential, legally privileged, protected by privacy laws, or otherwise restricted from disclosure to anyone else. If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient, you are hereby notified that any use, copying, distributing, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited. If you received this e-mail in error, please return the e-mail to the sender, delete it from your computer, and destroy any printed copy of it.