* [dpdk-users] Fwd: How to check the packets dropped by RED in DPDK?
[not found] <mailman.40583.1578305599.7586.users@dpdk.org>
@ 2020-01-06 10:24 ` Gokul Bargaje
2020-01-06 10:28 ` Gokul Bargaje
0 siblings, 1 reply; 2+ messages in thread
From: Gokul Bargaje @ 2020-01-06 10:24 UTC (permalink / raw)
To: users, dev; +Cc: Mohit P. Tahiliani
Hi All,
I am running the qos_sched sample application to see the RED packet drop. I
am generating the traffic and sending the traffic via qos_sched
application. As a result,
1. The application is showing the packet drop which is so high as shown in
the below figure.
2. How to determine that the packets are dropped by the RED or TAIL drop
method?
Following is the output I am getting from an application on every second.
*_______________________________________________*
*RX port 1: rx: 22954 err: 0 no_mbuf: 0TX port 0: tx: 1088 err:
0-------------+----------------+----------------+ |
received | dropped
|-------------+----------------+----------------+ RX | 20476
| 0 |QOS+TX | 20476 | 0 |
pps:1093--------------+---------------+-----------------+*
_______________________________________________
I have enabled RED from the configuration file by enabling following flags.
*CONFIG_RTE_SCHED_RED=yCONFIG_RTE_SCHED_COLLECT_STATS=y*
Please do help if you can.
Thank you,
Gokul
^ permalink raw reply [flat|nested] 2+ messages in thread* [dpdk-users] Fwd: How to check the packets dropped by RED in DPDK?
2020-01-06 10:24 ` [dpdk-users] Fwd: How to check the packets dropped by RED in DPDK? Gokul Bargaje
@ 2020-01-06 10:28 ` Gokul Bargaje
0 siblings, 0 replies; 2+ messages in thread
From: Gokul Bargaje @ 2020-01-06 10:28 UTC (permalink / raw)
To: dev, users
Correcting the 'packet drop' mentioned in the previous mail.
Hi All,
I am running the qos_sched sample application to see the RED packet drop. I
am generating the traffic and sending the traffic via qos_sched
application. As a result,
1. The application is showing the packet drop which is so high as shown in
the below figure.
2. How to determine that the packets are dropped by the RED or TAIL drop
method?
Following is the output I am getting from an application on every second.
*_______________________________________________*
*RX port 1: rx: 22954 err: 0 no_mbuf: 0TX port 0: tx: 1088 err:
0-------------+----------------+----------------+ |
received | dropped
|-------------+----------------+----------------+ RX | 20476
| 0 | QOS+TX | 20476 | 19383 |
pps:1093--------------+---------------+-----------------+*
_______________________________________________
I have enabled RED from the configuration file by enabling following flags.
*CONFIG_RTE_SCHED_RED=y*
*CONFIG_RTE_SCHED_COLLECT_STATS=y*
Please do help if you can.
Thank you,
Gokul
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-01-06 10:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <mailman.40583.1578305599.7586.users@dpdk.org>
2020-01-06 10:24 ` [dpdk-users] Fwd: How to check the packets dropped by RED in DPDK? Gokul Bargaje
2020-01-06 10:28 ` Gokul Bargaje
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).