* ixgbe driver - Intel nic 15e4 (x553) reporting link "up" even though the link is down (No traffic going through the interface)
@ 2022-02-15 2:12 Pushpadant
0 siblings, 0 replies; 2+ messages in thread
From: Pushpadant @ 2022-02-15 2:12 UTC (permalink / raw)
To: users
[-- Attachment #1: Type: text/plain, Size: 1447 bytes --]
Hi Guys,
Using Dpdk verion : 18.11
Could you please help me figure out why get link status still reports
interface as UP even though the link is Down.
Intel card:
06:00.0 Ethernet controller: Intel Corporation Device 15e4 (rev 11) - X553
06:00.1 Ethernet controller: Intel Corporation Device 15e4 (rev 11) - X553
07:00.0 Ethernet controller: Intel Corporation Device 15e5 (rev 11) - X553
Problem: Even after bringing DOWN the port, get link status still reports
interface UP.
My investigation:
1. in ixgbe/base/ixgbe_type.h i see these being defined. Not sure why its
defined under this following comment /* Placeholder value, pending
official value. */
#define IXGBE_DEV_ID_X550EM_A_1G_T 0x15E4
#define IXGBE_DEV_ID_X550EM_A_1G_T_L 0x15E5
From this detail i can conclude we have support for above nics.
2.
https://doc.dpdk.org/guides-18.11/nics/ixgbe.html#supported-chipsets-and-nics
- This link has supported nics and these above nics are not listed under
this.
3. After putting some debug statement in ixgbe driver the problem seem to
be in base/ixgbe_common.c(ixgbe_check_mac_link_generic() function)
links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
if (links_orig != links_reg) {
4. I suspect on the resister value used to identify the link status is
messing up.
Could you please provide your input.
Thank you so much for your time.
[-- Attachment #2: Type: text/html, Size: 1783 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* ixgbe driver - Intel nic 15e4 (x553) reporting link "up" even though the link is down (No traffic going through the interface)
@ 2022-02-14 4:47 Pushpadant
0 siblings, 0 replies; 2+ messages in thread
From: Pushpadant @ 2022-02-14 4:47 UTC (permalink / raw)
To: users
[-- Attachment #1: Type: text/plain, Size: 1453 bytes --]
Hi Guys,
Dpdk verion : 18.11
Could you please help me figure out why get link status still reports
interface as UP even though the link is Down.
Intel card:
06:00.0 Ethernet controller: Intel Corporation Device 15e4 (rev 11) - X553
06:00.1 Ethernet controller: Intel Corporation Device 15e4 (rev 11) - X553
07:00.0 Ethernet controller: Intel Corporation Device 15e5 (rev 11) - X553
Problem: Even after bringing DOWN the port, get link status still reports
interface UP.
My investigation:
1. in ixgbe/base/ixgbe_type.h i see these being defined. Not sure why its
defined under this following comment /* Placeholder value, pending
official value. */
#define IXGBE_DEV_ID_X550EM_A_1G_T 0x15E4
#define IXGBE_DEV_ID_X550EM_A_1G_T_L 0x15E5
From this detail i can conclude we have support for above nics.
2.
https://doc.dpdk.org/guides-18.11/nics/ixgbe.html#supported-chipsets-and-nics
- This link has supported nics and these above nics are not listed under
this.
3. After putting some debug statement in ixgbe driver the problem seem to
be in base/ixgbe_common.c(ixgbe_check_mac_link_generic() function)
links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
if (links_orig != links_reg) {
4. I suspect on the resister value used to identify the link status is
messing up.
Could you please provide your input.
Thank you so much for your time.
Pushpadant
[-- Attachment #2: Type: text/html, Size: 1837 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-02-17 9:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-15 2:12 ixgbe driver - Intel nic 15e4 (x553) reporting link "up" even though the link is down (No traffic going through the interface) Pushpadant
-- strict thread matches above, loose matches on Subject: below --
2022-02-14 4:47 Pushpadant
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).