DPDK usage discussions
 help / color / mirror / Atom feed
* ixgbe driver - Intel nic 15e4 (x553) reporting link "up" even though the link is down (No traffic going through the interface)
@ 2022-02-14  4:47 Pushpadant
  0 siblings, 0 replies; 2+ messages in thread
From: Pushpadant @ 2022-02-14  4:47 UTC (permalink / raw)
  To: users

[-- Attachment #1: Type: text/plain, Size: 1453 bytes --]

Hi Guys,

Dpdk verion : 18.11

Could you please help me figure out why  get link status still reports
interface as UP even though the link is Down.

Intel card:

06:00.0 Ethernet controller: Intel Corporation Device 15e4 (rev 11) - X553
06:00.1 Ethernet controller: Intel Corporation Device 15e4 (rev 11) - X553
07:00.0 Ethernet controller: Intel Corporation Device 15e5 (rev 11) - X553

Problem: Even after bringing DOWN the port, get link status still reports
interface UP.

My investigation:

1. in ixgbe/base/ixgbe_type.h  i see these being defined. Not sure why its
defined under  this following comment /* Placeholder value, pending
official value. */

#define IXGBE_DEV_ID_X550EM_A_1G_T              0x15E4
#define IXGBE_DEV_ID_X550EM_A_1G_T_L            0x15E5

From this detail i can conclude we have support for above nics.

2.
https://doc.dpdk.org/guides-18.11/nics/ixgbe.html#supported-chipsets-and-nics
- This link has supported nics and these above nics are not listed under
this.


3. After putting some debug statement in ixgbe driver  the problem seem to
be in  base/ixgbe_common.c(ixgbe_check_mac_link_generic() function)

        links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
       links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
       if (links_orig != links_reg) {

4. I suspect on the resister value used to identify the link status is
messing up.

Could you please provide your input.

Thank you so much for your time.

Pushpadant

[-- Attachment #2: Type: text/html, Size: 1837 bytes --]

^ permalink raw reply	[flat|nested] 2+ messages in thread

* ixgbe driver - Intel nic 15e4 (x553) reporting link "up" even though the link is down (No traffic going through the interface)
@ 2022-02-15  2:12 Pushpadant
  0 siblings, 0 replies; 2+ messages in thread
From: Pushpadant @ 2022-02-15  2:12 UTC (permalink / raw)
  To: users

[-- Attachment #1: Type: text/plain, Size: 1447 bytes --]

Hi Guys,

Using Dpdk verion : 18.11

Could you please help me figure out why  get link status still reports
interface as UP even though the link is Down.

Intel card:

06:00.0 Ethernet controller: Intel Corporation Device 15e4 (rev 11) - X553
06:00.1 Ethernet controller: Intel Corporation Device 15e4 (rev 11) - X553
07:00.0 Ethernet controller: Intel Corporation Device 15e5 (rev 11) - X553

Problem: Even after bringing DOWN the port, get link status still reports
interface UP.

My investigation:

1. in ixgbe/base/ixgbe_type.h  i see these being defined. Not sure why its
defined under  this following comment /* Placeholder value, pending
official value. */

#define IXGBE_DEV_ID_X550EM_A_1G_T              0x15E4
#define IXGBE_DEV_ID_X550EM_A_1G_T_L            0x15E5

From this detail i can conclude we have support for above nics.

2.
https://doc.dpdk.org/guides-18.11/nics/ixgbe.html#supported-chipsets-and-nics
- This link has supported nics and these above nics are not listed under
this.


3. After putting some debug statement in ixgbe driver  the problem seem to
be in  base/ixgbe_common.c(ixgbe_check_mac_link_generic() function)

        links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
       links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
       if (links_orig != links_reg) {

4. I suspect on the resister value used to identify the link status is
messing up.

Could you please provide your input.

Thank you so much for your time.

[-- Attachment #2: Type: text/html, Size: 1783 bytes --]

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2022-02-17  9:08 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-14  4:47 ixgbe driver - Intel nic 15e4 (x553) reporting link "up" even though the link is down (No traffic going through the interface) Pushpadant
2022-02-15  2:12 Pushpadant

DPDK usage discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.dpdk.org/users/0 users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 users users/ http://inbox.dpdk.org/users \
		users@dpdk.org
	public-inbox-index users

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.users


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git