Re: [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000

[Truring Team <truring12@gmail.com>]

Yes , I have configured it via grub.

Grub:
"default_hugepagesz=1G hugepagesz=1G hugepages=2"
grub2-mkconfig -o /boot/grub2/grub.cfg

Manual:
mkdir /dev/hugepages1G
mount -t hugetlbfs -o pagesize=1G none /dev/hugepages1G
echo 2 >
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages

Regards
Puneet

On Wed, 26 May 2021 at 10:05, Nishant Verma <vnish11@gmail.com> wrote:

> meminfo states: Hugepagesize:    1048576 kB
> But  in your initial mail you state Hugepage size is 1G.
>
> have you configured HugePage via grub.... ?
>
>
> Thanks.
>
> Regards,
> NV
>
> On Wed, May 26, 2021 at 12:21 AM Truring Team <truring12@gmail.com> wrote:
>
>> Hi Nishant,
>>
>> cat /proc/meminfo
>> 11:59:29.200 §MemTotal:       23101672 kB
>> 11:59:29.200 §MemFree:        15254764 kB
>> 11:59:29.200 §MemAvailable:   19243184 kB
>> 11:59:29.200 §Buffers:            6792 kB
>> 11:59:29.201 §Cached:          4084844 kB
>> 11:59:29.201 §SwapCached:            0 kB
>> 11:59:29.201 §Active:          3609016 kB
>> 11:59:29.201 §Inactive:        1175160 kB
>> 11:59:29.201 §Active(anon):     695644 kB
>> 11:59:29.202 §Inactive(anon):    19716 kB
>> 11:59:29.202 §Active(file):    2913372 kB
>> 11:59:29.202 §Inactive(file):  1155444 kB
>> 11:59:29.202 §Unevictable:           0 kB
>> 11:59:29.202 §Mlocked:               0 kB
>> 11:59:29.203 §SwapTotal:      11665404 kB
>> 11:59:29.204 §SwapFree:       11665404 kB
>> 11:59:29.204 §Dirty:                32 kB
>> 11:59:29.204 §Writeback:             0 kB
>> 11:59:29.204 §AnonPages:        694764 kB
>> 11:59:29.205 §Mapped:           140220 kB
>> 11:59:29.205 §Shmem:             22800 kB
>> 11:59:29.205 §Slab:             445016 kB
>> 11:59:29.205 §SReclaimable:     289968 kB
>> 11:59:29.205 §SUnreclaim:       155048 kB
>> 11:59:29.206 §KernelStack:       16624 kB
>> 11:59:29.206 §PageTables:        35892 kB
>> 11:59:29.206 §NFS_Unstable:          0 kB
>> 11:59:29.206 §Bounce:                0 kB
>> 11:59:29.206 §WritebackTmp:          0 kB
>> 11:59:29.207 §CommitLimit:    22167664 kB
>> 11:59:29.207 §Committed_AS:    4342668 kB
>> 11:59:29.207 §VmallocTotal:   34359738367 kB
>> 11:59:29.207 §VmallocUsed:      463188 kB
>> 11:59:29.207 §VmallocChunk:   34358835196 kB
>> 11:59:29.208 §HardwareCorrupted:     0 kB
>> 11:59:29.208 §AnonHugePages:    329728 kB
>> 11:59:29.208 §CmaTotal:              0 kB
>> 11:59:29.209 §CmaFree:               0 kB
>> 11:59:29.209 §HugePages_Total:    1024
>> 11:59:29.209 §HugePages_Free:     1019
>> 11:59:29.209 §HugePages_Rsvd:        0
>> 11:59:29.209 §HugePages_Surp:        0
>> 11:59:29.209 §Hugepagesize:       2048 kB
>> 11:59:29.209 §DirectMap4k:      381760 kB
>> 11:59:29.209 §DirectMap2M:    13973504 kB
>> 11:59:29.215 §DirectMap1G:    11534336 kB
>>
>> Regards
>>
>>
>> On Wed, 26 May 2021 at 09:43, Nishant Verma <vnish11@gmail.com> wrote:
>>
>>> Can you paste output of /proc/meminfo ?
>>>
>>>
>>>
>>> Regards,
>>> NV
>>>
>>> On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com>
>>> wrote:
>>>
>>>> Hi Team,
>>>>
>>>> I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK
>>>> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE
>>>> Controller but facing following issues:
>>>>
>>>> If someone can look into the following logs and help me figure out the
>>>> issue?
>>>>
>>>>
>>>>
>>>> 1. DPDK 20.11 ( Using 1 GB hugepages)
>>>>
>>>>    gdb ./dpdk-testpmd
>>>>
>>>> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7
>>>>
>>>> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc.
>>>>
>>>> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later
>>>> http://gnu.org/licenses/gpl.html
>>>>
>>>> 12:45:59.349 §This is free software: you are free to change and
>>>> redistribute it.
>>>>
>>>> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law.
>>>> Type
>>>> "show copying"
>>>>
>>>> 12:45:59.349 §and "show warranty" for details.
>>>>
>>>> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu".
>>>>
>>>> 12:45:59.351 §For bug reporting instructions, please see:
>>>>
>>>> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/...
>>>>
>>>> 12:45:59.415 §Reading symbols from
>>>> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging
>>>> symbols
>>>> found)...done.
>>>>
>>>> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i
>>>>
>>>> 12:46:11.493 §Starting program:
>>>> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i
>>>>
>>>> 12:46:11.717 §[Thread debugging using libthread_db enabled]
>>>>
>>>> 12:46:11.719 §Using host libthread_db library
>>>> "/lib64/libthread_db.so.1".
>>>>
>>>> 12:46:11.768 §EAL: Detected 6 lcore(s)
>>>>
>>>> 12:46:11.769 §EAL: Detected 1 NUMA nodes
>>>>
>>>> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)]
>>>>
>>>> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>>>
>>>> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)]
>>>>
>>>> 12:46:11.792 §EAL: Selected IOVA mode 'PA'
>>>>
>>>> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB
>>>>
>>>> 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB
>>>>
>>>> 12:46:11.854 §EAL: Probing VFIO support...
>>>>
>>>> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)]
>>>>
>>>> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)]
>>>>
>>>> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)]
>>>>
>>>> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)]
>>>>
>>>> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)]
>>>>
>>>> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>>>> 0000:65:00.0 (socket 0)
>>>>
>>>> 12:46:11.915 §
>>>>
>>>> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault.
>>>>
>>>> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>>>>
>>>> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install
>>>> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64
>>>> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64
>>>> zlib-1.2.7-19.el7_9.x86_64
>>>>
>>>> 12:46:14.542 §(gdb) bt
>>>>
>>>> 12:46:14.548 §#0  0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>>>>
>>>> 12:46:14.548 §#1  0x0000000000eb811e in ecore_hw_init ()
>>>>
>>>> 12:46:14.549 §#2  0x0000000000ef7397 in qed_slowpath_start ()
>>>>
>>>> 12:46:14.549 §#3  0x0000000000ef0483 in qede_common_dev_init ()
>>>>
>>>> 12:46:14.549 §#4  0x0000000000ef1113 in qede_eth_dev_pci_probe ()
>>>>
>>>> 12:46:14.549 §#5  0x0000000000a4450b in pci_probe ()
>>>>
>>>> 12:46:14.550 §#6  0x00000000009dbc6c in rte_bus_probe ()
>>>>
>>>> 12:46:14.550 §#7  0x00000000009fa91c in rte_eal_init ()
>>>>
>>>> 12:46:14.617 §#8  0x0000000000425db1 in main ()
>>>>
>>>> 12:46:17.052 §(gdb) quit
>>>>
>>>> 12:46:17.056 §A debugging session is active.
>>>>
>>>> 12:46:17.056 §
>>>>
>>>> 12:46:17.057 §        Inferior 1 [process 23180] will be killed.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> 2. *DPDK 21.05:*
>>>>
>>>>    ./dpdk-testpmd -l 0-5 -n4 -- -i
>>>>
>>>> 12:46:46.257 §EAL: Detected 6 lcore(s)
>>>>
>>>> 12:46:46.257 §EAL: Detected 1 NUMA nodes
>>>>
>>>> 12:46:46.258 §EAL: Detected static linkage of DPDK
>>>>
>>>> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>>>
>>>> 12:46:46.285 §EAL: Selected IOVA mode 'PA'
>>>>
>>>> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0
>>>>
>>>> 12:46:46.288 §EAL: No available 2048 kB hugepages reported
>>>>
>>>> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>>>> 0000:65:00.0 (socket 0)
>>>>
>>>> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the
>>>> MCP
>>>> scratch-pad is not configured
>>>>
>>>> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized
>>>>
>>>> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not
>>>> initialized!
>>>>
>>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not
>>>> initialized
>>>>
>>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW
>>>> information
>>>>
>>>> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed
>>>>
>>>> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe
>>>> failed rc -3
>>>>
>>>> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used
>>>>
>>>> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created
>>>>
>>>> 12:46:46.423 §testpmd: No probed ethernet devices
>>>>
>>>> 12:46:46.461 §Interactive-mode selected
>>>>
>>>> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456,
>>>> size=2176, socket=0
>>>>
>>>> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc
>>>>
>>>> 12:46:46.540 §Done
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> System Information:
>>>>
>>>> *ethtool -i p2p1*
>>>> driver: qede
>>>> version: 8.33.0.20
>>>> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0*
>>>> expansion-rom-version:
>>>> bus-info: 0000:65:00.0
>>>> supports-statistics: yes
>>>> supports-test: yes
>>>> supports-eeprom-access: no
>>>> supports-register-dump: yes
>>>> supports-priv-flags: yes
>>>>
>>>>
>>>>
>>>> *ethtool -i p2p2 *driver: qede
>>>> version: 8.33.0.20
>>>> firmware-version: mfw 8.24.44.0 storm 8.33.11.0
>>>> expansion-rom-version:
>>>> bus-info: 0000:65:00.1
>>>> supports-statistics: yes
>>>> supports-test: yes
>>>> supports-eeprom-access: no
>>>> supports-register-dump: yes
>>>> supports-priv-flags: yes
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> *lspci -nn | grep Ether*
>>>>
>>>> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and
>>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>>>
>>>> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and
>>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>>>
>>>> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ
>>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>>>
>>>> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ
>>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>>>
>>>>
>>>>
>>>> cd /lib/firmware/qed/
>>>>
>>>> ls
>>>>
>>>> 12:48:27.269 §qed_init_values-8.10.9.0.bin
>>>> qed_init_values-8.30.12.0.bin
>>>>  qed_init_values_zipped-8.10.5.0.bin
>>>> qed_init_values_zipped-8.33.11.0.bin  qed_init_values_zipped-8.7.3.0.bin
>>>>
>>>> 12:48:27.272 §qed_init_values-8.14.6.0.bin
>>>> qed_init_values-8.33.12.0.bin
>>>>  qed_init_values_zipped-8.15.3.0.bin
>>>> qed_init_values_zipped-8.37.2.0.bin
>>>>
>>>> 12:48:27.273 §qed_init_values-8.18.9.0.bin
>>>> qed_init_values-8.40.33.0.bin
>>>>  qed_init_values_zipped-8.20.0.0.bin
>>>> qed_init_values_zipped-8.37.7.0.bin
>>>>
>>>> 12:48:27.275 §qed_init_values-8.20.0.0.bin
>>>> qed_init_values_zipped-8.10.10.0.bin
>>>> qed_init_values_zipped-8.33.1.0.bin
>>>> qed_init_values_zipped-8.4.2.0.bin
>>>>
>>>>
>>>> Best Regards
>>>>
>>>> Puneet
>>>>
>>>